WHATS IN THE BOX LOCATION OF CONTROLS SPECIFICATIONS PAIRING WITH A BLUETOOTH DEVICECONNECTING WITH OTHER BLUETOOTH DEVICES TBT2611 Bluetooth Alloy Earbuds USB Cable for charging QUICK START GUIDE Manufacture:SHENZHEN E-CARE TECHNOLOGY CO.,LTD Microphone Bluetooth indicator light (Blue)/
Charging indicator light (Red) Next song/volume increase Previous song/volume decrease On/Off/Play/Pause/Answer/End Call ff Micro USB charging port Make sure the mobile device (Mobile phone, tablet, computer, etc.) you are The earbuds can only be connected to one Bluetooth device at a time. To pair
- Bluetooth V4.2 + EDR
- Wireless range: up to 27 FT
- Talk Time: 4 Hours
- Music Playback Time: 3.5 Hours
- Charging time: 1.5 hours
- A2DP music steaming
- Voice prompt
- Advanced 10 mm neodymium driver unit for high quality sound procedures may vary depending on the mobile device you are trying to pair with, for detailed information on using the Bluetooth function of your mobile device, please refer to the mobile devices user guide. the Bluetooth indicator light will begin to alternate Blue/Red , this indicates the earbuds are in pairing mode. 2. On your mobile device navigate to Settings>Bluetooth and search/scan for Tech2 Alloy (some mobile devices will begin to search automatically) and select it. select Yes or Enter to complete the pairing process. The Bluetooth earbuds will automatically reconnect to your mobile device when they are powered on and in Bluetooth range be automatically disconnected. Then proceed to pair with the desired device using the above steps. PLAYING MUSIC MAKING AND RECEIVING PHONE CALLS CHARGING FCC STATEMENT WARRANTY When the unit is connected and paired to your device.
-Press Play/Pause/Answer/End Call on the earbuds remote to start playing music OR navigate to the music app on your mobile device and select a media
le to begin playing. When the unit is connected and paired to your device.
-Press On/O/ Play/Pause/Answer/End Call on the earbuds remote to accept a call.
-Press Play/Pause/Answer/End Call during a call to end the call.
-Press & hold Next song/volume increase to skip to the next track.
-Press & hold Previous song/volume decrease to go back to the previous track.
-Press and hold Play/Pause/Answer/End Call for 2 seconds to reject an incoming call.
-To place a call, dial a number or select a contact on your mobile device
-Quick Press + or - for volume control. You can also control the volume using the volume controls on your mobile device. For maximum volume output make sure the volume on your mobile device is set to the loudest setting. B3D
-Attach the included Micro USB cable (smaller end) into the Micro USB charging port of the earbuds remote, and plug the other end of the cable into a USB charger or USB port on your PC. If the battery is completely dead it will take up to 2 hours to fully charge the device. DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-The Charging indicator light will illuminate red when the unit is charging, when charging is complete the Charging Indicator light will become blue. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. the right to be subrogated under any existing insurance policies the purchaser may have. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BAYIT. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BAYIT BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BAYIT PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specic legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. Bayit Home Automation Corp. (Bayit) warrants to the original purchaser of this Tech2 product that the product shall be free of defects in design, assembly, material, or workmanship. Bayit warrants the Tech2 product for one (1) year for devices bought in U.S. Product Warranty Bayit will repair or replace, at its option and free of charge (except for shipping charges for the product) any defective Tech2 product. Bayit reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Bayit is unable to repair or replace the product (for example, because it has been discontinued), Bayit will oer either a refund or a credit toward the purchase of another product in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use or oer a similar product at Bayits discretion. No warranties will be honored unless the purchaser provides, at purchaser's expense, the product for inspection. No warranties will be honored if Bayit determines that the product has been improperly installed, altered in any way, or tampered with. The Bayit Product Warranty does not protect against acts of God such as ood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low-voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modication or alteration. Bayit reserves the right to review the damaged Tech2 product. All costs of shipping the Tech2 product to Bayit for inspection are the sole responsibility of the purchaser. If Bayit determines, in its sole discretion, that it is impractical to ship the damaged product to Bayit, Bayit may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such product. Any cost of the estimate or shipping the product to and from a repair facility is the purchaser's responsibility. Damaged product must remain available for inspection until the claim is nalized. Whenever claims are settled, Bayit reserves