WLAN CF Card Specification Introduction Thank you for purchasing the Wireless Local Area Network (WLAN) Compact Flash (CF) Card. This card is designed to comply with IEEE 802.11b Wireless LAN standard and easy to carry with the compact size. It can be easily used with PDA or Handheld devices. It supports windows OS Plug & Play installation and USB Hot Swap, Allowing you plug in or remove it without reboot your computer. It is ideally suitable for being integrated into the personal Mobile and Handheld Platform. Product Kit Before installation, make sure that you have the following items:
WLAN CF Card
Software CD containing User manual and driver
Quick installation guide Please contact you local distributor or authorized reseller immediately for any missing or damaged components. System Requirements Before using your WLAN USB adaptor, please check that you have the following required items:
Desktop/Notebook with CD-ROM drive
Microsoft Windows 98ME/2000/XP. Features
Compact size design which is suitable for Handheld device with CF type I interface
Complies with the IEEE 802.11b
Radio Technology: Direct Sequence Spread Spectrum (DSSS)
Data Rate: up to 11Mbps
Build in 2 Chip Antenna
Host Interface: Compact Flash Type I
Frequency: 2.4 GHz
Portable and compact size design Description Model Name Standard Host Interface Physical Dimension Data Rate Operation Voltage Frequency Range Host OS Data Security Operating Channels Modulation Technique Transmit Power Receive Sensitivity Range Coverage 2.4GHz Direct Sequence Spread Spectrum 802.11b 11Mbps WLAN CF Card WL0402 Series IEEE 802.11b Compact Flash (CF) 60 x 43x 7 mm (L x W x H) 11/5.5/2.1Mbps, Auto Rate 3.3 V 2.4 GHz, Direct Sequence Spread Spectrum (DSSS) Windows 98ME/2000/XP 64/128-bit WEP (Wired Equivalent Privacy) Encryption
1-11 United States (FCC)
1-11 Canada (DOC)
14 Japan (MKK)
1-13 Europe (ETSI) 11Mbps(CCK)/5.5Mbps(CCK)/2M bps(DQPSK)/1Mbps(DBPSK) Normal Temp. Range: 17dBm Extended Temp Range: 13dBm 11Mbps < -81dBm 5.5Mbps< -86dBm 2Mbps< -87dBm 1Mbps< -89dBm Open Space:100m~400m Indoors: 30~100m V1.1 WLAN CF Card Installation of WLAN CF Card This is a quick step by step guide on how to install your WLAN CF Card. Please follow the steps described below and refer to the appropriate sections for further details:
Power on the computer.
Insert the provided CD into your CD-ROM drive and locate the executable file Setup.exe Setup.exe
Follow the installation instructions from the Install Shield Wizard by pressing the Next button Windows follow the steps bellow:
1. First close the application prior starting the unistallation procedure 2. Double click the Add/Remove Program button under the control Panel 3. Select the Wireless Network Client option and click the Change/Remove button
Next you should comply with the License Agreement.
After the License Agreement you can select the destination location for where the application will be installed, and the program folder for Windows, you can safely click the Next button to end the installation procedure.
Uninstallation Procedure In order to uninstall the application when in
In the next window that will appear make sure that the Next button in order to finish the removal of the Wireless Network Client (WNC). FCC RF Radiation Exposure Statement The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. V1.1