BCM BPR1000-PU/BPR1000-U/MOR600-N BPR1000 Mobile Router Quick Installation Guide Verify Package Contents 1. The BPR1000 Mobile Router package should contain the items Listed below . If any of the items are missing please contact your Reseller . BPR1000 Router Ethernet Cable DC 5V/2A Power Adapter User Guide on CD-ROM Quick Installation Guide BCM BPR1000-PU/BPR1000-U/MOR600-N Connections and LEDS 1 V 0.1 2. The following figures show the various connectors and status LED indicators on the BPR1000 Mobile Router . EZ Button Following table is for WWAN status. WWAN LED Color Activity None Green + Red Green Green Red None Always On Always On Flash at Same Time Always On State No Data Card Inserted or No Internet Connection System Initialization State High Speed Internet Connection Low Speed Internet Connection Card Error BCM BPR1000-PU/BPR1000-U/MOR600-N Top USB Slot PCMCIA Slot Power Jack Side USB Slot Ethernet Port Power Jack The BPR1000 have two models can be choose, the one is BPR1000-PCMCIA +
USB the other one is BPR1000-2USB. Note: For the BPR1000-2USB model, the two USB slots can not be activated at same time. If you plug in two data cards in Side USB slot and Top USB slot just only data card of Side USB will be activate. BCM BPR1000-PU/BPR1000-U/MOR600-N Getting Start 3. broadband service.(Subject to services and Service terms available from your AInsert Date Card carries) . Before you Begin , make sure that your compatible 32-bit Data Card with 3 V 0.1 AInsert Data card to PC card slot BPlug in power adapter BCM BPR1000-PU/BPR1000-U/MOR600-N When connect the power adapter to back panel power Jack The power LED Will Turn ON to indicate power has been applied. 4 V 0.1 Power LED CCheck WWAN LED When Power ON the BPR1000, The BPR1000 Will Auto to detect and initial Your Date CardThen status LED Will Flash ON and OFF One by one as BPR1000 Performs initialization and Internet connection processBPR1000 Will Auto Configured properly for your Internet Service AccountIt Will take a few minutes When Complete, the status LED Will illuminate GreenPlease refer the below Status LED Activity table for each State LED Color None Green + Red Green Green Activity None Always On Always On Flash at Same Time State No Data Card Inserted or No Internet Connection System Initialization State High Speed Internet Connection Low Speed Internet Connection BCM BPR1000-PU/BPR1000-U/MOR600-N Red Always On Card Error Congratulation! You have Connected With Wireless Internet 5 V 0.1 4. BPR1000 is PnP for your Data card. It Will Auto Configuration and enable the wireless Lan. If you have to any problem or need more advance feature Setting . Please refer the step 5 for more detail. BCM BPR1000-PU/BPR1000-U/MOR600-N 5. Setting in Web page 6 V 0.1 AConnect your PC/Notebook toBPR1000 LAN BOpen your browser Such as IE or Netscape and type Press Enter http://192.168.1.1 in address bar. And then you will see the authentication page as below. The default Username /
Password is admin / admin. BCM BPR1000-PU/BPR1000-U/MOR600-N COnce logged in the following screen is displayed 7 V 0.1 DClick Next for LAN Networking Setting BCM BPR1000-PU/BPR1000-U/MOR600-N 8 V 0.1 IP Address The IP Address of the LAN . The default IP address is 192.168.1.1 Sub Mask The subnet mask of the Lan Domain Name Enter Domain Name if need. EClick Next for WWAN Networking Setting 8 V 0.1 BCM BPR1000-PU/BPR1000-U/MOR600-N NoteThe WWAN fields may not be necessary for your connection. The information on this page will only be used when your service provider requires you to enter User Name and Password to connect to the broadband Network. Please Refer to your data card documentation or service provider for addition information. ISP Specific a Name for your recognition. User Name Enter the new User Name for your Data card connection. Password Enter the new Password for your Data card connection. APN Enter the name of your service Provider Network. Dial Number The default is 99#. This field should not be altered except when required by your service provider. Auth type Default is PAP, if you need to input Username / Password you should choose CHAP. 9 V 0.1 BCM BPR1000-PU/BPR1000-U/MOR600-N FClick Next for wireless network setting Disable Wireless LAN Interface Band You can choose one of 2.4 GHz (B) , 2.4 GHz (G) or 2.4 GHz (B+G). The Click check button to disable Wireless LAN interface. SSID Enter your SSID name in the field provided. SSID names Can contain default is 2.4 GHz (B+G). up to 32 ASCLL characters. Channel NumberIndicates the channel setting for the Mobile Router. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. BCM BPR1000-PU/BPR1000-U/MOR600-N GClick Next for Wireless Security setting 10 V 0.1 SSID Enter your SSID name in the field provided. SSID names Can contain up to 32 ASCLL characters. Encryption You may select from five levels of encryption to secure your wireless NetworkNone; WEP; WPA(TKIP); WPA2(AES) or WPA2 Mixed . HClick Finished complete your setting. BCM BPR1000-PU/BPR1000-U/MOR600-N Fir Firmware Upgrade 6.6. Please follow the below step to upgrade your MOR600 firmware. A: Click Management Upgrade Firmware item in left menu. You can see the following page. 11 V 0.1 11 V 0.1 B: Choose the new firmware in your PC HDD directory. Then Click Upload. BPR1000 will do the firmware upgrade. Once the upgrade was complete. The BPR1000 will auto reboot and system can work again. 12 V 0.1 BCM BPR1000-PU/BPR1000-U/MOR600-N
:Mobile Router
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
"The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.