all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual-1 | Users Manual | 620.21 KiB | December 02 2015 | |||
1 |
|
Users Manual-2 | Users Manual | 141.31 KiB | December 02 2015 | |||
1 |
|
Users Manual-3 | Users Manual | 127.59 KiB | December 02 2015 | |||
1 | Cover Letter(s) | December 02 2015 | ||||||
1 | External Photos | December 02 2015 | ||||||
1 | ID Label/Location Info | December 02 2015 | ||||||
1 | Internal Photos | December 02 2015 | ||||||
1 | RF Exposure Info | December 02 2015 | ||||||
1 | Test Report | December 02 2015 | ||||||
1 | Test Setup Photos | December 02 2015 | ||||||
1 | Cover Letter(s) | December 02 2015 |
1 | Users Manual-1 | Users Manual | 620.21 KiB | December 02 2015 |
SFQ-11 User Manual Sound Kick 2 Safety Information electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING
(Symbol provided by RETAC) 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vase,shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an 2 18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada IC statements This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3 (B) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 3 in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. For compatibility between the system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information. Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation. Attention:
This symbol is only valid in the European Union. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment. QDID: xxxxxx CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV. CAUTION - Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
Front: No obstructions and open spacing. Sides / Top / Back: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10cm (3-15/16") or more. Front View:
15 cm
(5- 15/16") 15 cm
(5-15/16") Side View:
15 cm
(5-15/16") 15 cm
(5- 15/16") Front side Back side 15 cm
(5-15/16") or 15 cm
(5- 15/16") Back side 15 cm
(5-15/16") 10 cm
(3- 15/16") Front side 10 cm
(3- 15/16") 4 Contents Getting Started .............................................................................................. 6 Package Contents ......................................................................................................................... 6 Placing Sound Kick 2 .................................................................................................................... 6 Connecting to the AC Power Adapter ............................................................................................ 7 Charging the Built-in Battery ......................................................................................................... 7 Checking Battery Power ................................................................................................................ 8 System Overview .......................................................................................... 9 Top View ........................................................................................................................................ 9 Side View ...................................................................................................................................... 9 Rear View ...................................................................................................................................... 9 Basic Operation .......................................................................................... 10 Turning on/off the System ........................................................................................................... 10 Adjusting the Volume................................................................................................................... 10 Activating the Power Saving Mode ............................................................................................. 10 Selecting the Sound Source ...................................................................... 11 Playing back via Bluetooth ........................................................................ 12 Establishing a Bluetooth Connection .......................................................................................... 12 Using Multiple Bluetooth Devices ................................................................................................ 12 Playing back from Macbook or Macbook Pro .............................................................................. 13 Playing back from PC/Notebook ................................................................................................. 13 Playing back from External Source .......................................................... 14 Charging an External Device ..................................................................... 15 Optimizing Sound Quality .......................................................................... 16 Troubleshooting .......................................................................................... 17 Technical Specifications ............................................................................ 18 5 Getting Started Package Contents Examine whether the following package contents are all included:
Main Unit AC Power Adapter Adapter Plug Quick Start Guide Safety Card Warranty Card Placing Sound Kick 2 You can place the system directly onto a flat surface (such as a desk, a table, etc.) or stand the system up on a desk or table using the stand on the back. or When the system is used outdoor and in the rain, please ensure the two rubber covers are closed securely, and the water wont flow into system. Rubber Covers 6 Connecting to the AC Power Adapter WARNING! For optimal performance, use only the supplied AC power adapter. Ensure that power supply outlet matches with the unit AC's input 100V~240V, 50/60Hz before connection. 1. 2. Connect one end of the AC power adapter to DC IN jack, and the other end to an electrical Install the adapter plug to the AC power adapter. outlet only after all other connections are completed. Power outlet Adapter plug DC IN jack
(Under the rubber cover) Charging the Built-in Battery Plug the AC power adapter to start charge the built-in battery. During charging, the charging LED indicator combination with POWER button will indicate the charging status as follows:
System Mode Standby Power on but in idle mode Bluetooth mode or AUX IN mode During Charging Blinks in green at a slow rate. Off Blinks in green. Remains on in green. Charging Complete Blinks in white. Remains on in white. It takes about 3 hours to charge the battery from empty to full when the system is in standby mode. Time may vary depending on the temperature or conditions of use. The battery will give you portable power for up to 8 hours playback time. The playback time may vary depending on the temperature or conditions of use. Do not dispose of system in fire; battery may explode or leak. Type:
Model No:
Rated Voltage:
Capacity:
Li-Polymer Rechargeable Battery FT496476P 3.7V 2700mAh 7 Notes:
WARNING There is a danger of explosion if the battery is incorrectly replaced. Replace it only with the same or equivalent type. Do not expose it to excessive heat such as sunshine, fire, etc., where it would be exposed to high temperatures above 60C. Checking Battery Power When the system is on using the battery power and in idle mode, press and hold the VOL+ and VOL buttons simultaneously on the system to check the battery power by the LED indicator. Status Fast blinking (4 times) Fast blinking (3 times) Fast blinking (2 times) Color Green Green Green Battery Power 66%-100%
36%-65%
15%-35%
Note:
During operations in battery mode, if the LED indicator blinks alternately in white and green at a slow rate, it indicates the battery power is less than 15%; then you need to connect the AC power adapter to charge it in time. 8 System Overview Top View 1 2 3 Side View 4 5 6 8 9 10 11 7 Rear View 3. >> (Next/fast forward) button In Bluetooth mode, tap to skip to next track. Hold to fast-forward a track. 4. button Press to activate or deactivate the UQ3
(High Definition Wide Stereo) sound effect. 5. VOL button Press to decrease the volume level. 6. VOL+ button Press to increase the volume level. 7. Lanyard holes 8. POWER button / LED Indicator Press to switch between standby and power-on modes. 9.
(pair) button Press to put the system into pairing mode. 10. Rubber cover 11. AUX IN jack (Under the rubber cover) Inputs audio signals from an external device using an audio cable (not supplied). 12. Stand 13. Rubber cover 14. DC IN jack (Under the rubber cover) 15. Connect to AC power Adapter. POWER OUT port (Under the rubber cover) Charges your external USB chargeable devices. 12 13 14 15 1. << (Previous/Rewind) button In Bluetooth mode, press to skip to the start of the current track or skip to previous track. Hold to rewind a track fast. 2. (Play/Pause) button In Bluetooth mode, tap to play or pause a track. 9
(pair) button and the Press and hold the button together to disable or enable the Power Saving mode:
The LED indicator blinks twice in green to indicate Power Saving mode is off. The system will keep on all the time. The LED indicator blinks once in green to indicate the Power Saving mode is activated. The system will power off automatically when the system is in idle mode for 45 minutes. Notes:
Enable/disable the Power Saving mode during charging the battery, the LED indicator will blink in white. If you turn off the system manually, the system will activate the Power Saving mode automatically next time even if you disabled it before. Basic Operation Turning on/off the System Press POWER button on the side to turn on the System. Press POWER button again to turn off the System. Adjusting the Volume You can adjust the volume level when one of sound sources is selected by pressing the VOL+/ buttons. Each time you press VOL+ or VOL button, the LED indicator will blink once. If the system is at minimum volume level (or at maximum volume level), then press VOL button (or VOL+ button), the LED indicator will keep its status as before without any action. Activating the Power Saving Mode 10 Selecting the Sound Source This system enables you to access two sound sources AUX IN and Bluetooth. If AUX IN jack has been inserted, the sound source will switch to AUX IN mode automatically. Remove the audio cable (not supplied) from the AUX IN jack, the sound source will switch to Bluetooth mode automatically. When a Bluetooth connection has been established and the system is in Bluetooth mode, once you insert audio cable, the system will suspend the Bluetooth playback and switch to AUX IN mode. To resume the Bluetooth playback, you need to remove the audio cable from the AUX IN jack, and press the button. 11 Playing back via Bluetooth Establishing a Bluetooth Connection Notes:
If your mobile phone supports A2DP, AVRCP profiles, its music will play through the system. You can make a Bluetooth connection with a mobile phone, an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices. 1. Press POWER button to turn on the system. The LED indicator illuminates and blinks in white. 2. Press the
(pair) button to put the system in pairing mode. The indicator starts blinking at a fast rate.
(pair) button If you press and hold the for more than 2 seconds during the process of pairing, the operation will be canceled. 3. During this period, you can operate the mobile phone, iPad or Bluetooth-enabled device to pair with the system within a 33 feet (10m) range. Please check the user manual of the iPad or Bluetooth-enabled device with which you are initiating pair to learn about Bluetooth connection with any other devices. 4. Once the system is detected and its name Sound Kick 2 appears on the display of your Bluetooth-enabled device, then select the system on the display. Key in the default password 1234 if a prompt requests it. The LED indicator starts blinking quickly to indicate that the system and your device have entered into the connection mode. After a Bluetooth connection is established successfully, the LED indicator will remain on in white. 5. Select the desired music and press Play button on your device. The system automatically starts playing back the music. Before starting playback via Bluetooth, make sure the AUX IN jack is not inserted using audio cable. Try again above steps 2 to 4 if the LED indicator blinks slowly after blinking quickly for 3 minutes, the pair was unsuccessful. Using Multiple Bluetooth Devices Only one device can be used at a time, but you can switch between different Bluetooth devices. Make sure each device you want to use has already been paired, to switch devices:
1. On Sound Kick 2, press and hold the
(pair) button for 2 second. 2. On Bluetooth device, select the connection to Sound Kick 2. This device is now the connected device to Sound Kick 2, (the previous connected device is now disconnected). Repeat those steps to switch the connected device again. Notes:
If the system has no sound output, please check if the volume level of your Bluetooth device connected to the system is set to the minimum, or the Bluetooth device is muted. Ensure that the audio cable has been removed from the AUX IN jack. 12 6. Double click the Sound Kick 2 icon and the device connection screen will be shown. 7. Click the Connect button in the Music and Audio option. 8. Once connected, the LED indicator on the system will be solid on in white and the connection success screen will be shown. Playing back from Macbook or Macbook Pro 1. In the desktop screen, select the Open Bluetooth Preference. If there are any old Sound Kick 2 records, remove them. Click the Continue button to continue pairing process. 2. 3. Once completed, the pairing success screen will come out. Note:
Dont quit the page immediately. You may notice that the previous dialog screen still shows the device not connected. Just ignore it. Its confusing to the user. In fact, its connected already. 4. Open iTune, play a song. Then use the mouse to click the Bluetooth icon at the top right hand corner of the desktop screen, select the Sound Kick 2 option and then select the Use as Audio Device (Stereo). After a while (a few seconds), the music will come out from the system. If not, select the Use as Audio Device (Stereo) once again. The Sound Quality should be good. Playing back from PC/Notebook 1. Press the Start button to open the Device and Printers dialog box. 2. Turn on the system, then press the
(pair) button to put into the pairing mode. 3. Select the Add a device in the Device and Printer dialog box. The Sound Kick 2 icon will appear on the display. 4. Double click the Sound Kick 2 icon and wait until the device has been added successfully. 5. Click the Close button to close the Device and Printer dialog box. A Sound Kick 2 icon appears in the dialog box. 13 Playing back from External Source You can enjoy the sound from an optional component such as a digital music player through the speakers of this system. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Connect an external device to the
(not supplied). AUX IN jack of the system using a stereo audio cable To audio output such as CD/MD/digital music player, etc. AUX IN Jack
(Under the rubber cover) Notes:
When the audio cable is connected to the AUX IN jack, the system will switch to the AUX IN mode automatically. In order to save the energy, please unplug the AUX-IN cable when do not use. 1. Press POWER button to turn on the system. 2. Set the volume to the minimum position. 3. Start playback on the external device. 4. Adjust the volume to meet your listening requirement. 14 Charging an External Device The POWER OUT jack can be used to charge most devices that allow for USB charging
(including many mobile phones, smart phones and wireless headsets). Connect one end of USB power cord (not supplied) to POWER OUT port of the system, and the other end to your USB device. Power out port
(Under the rubber cover) To external USB devices, such as mobile, smartphone, etc. When Sound Kick 2 is using the power supply, simply connect your device to Sound Kick 2 to begin charging. When Sound Kick 2 is using the power of built-in battery, connect your device to Sound Kick 2, and turn on the system to begin charging. Notes:
Please use the USB power cord that came with your USB chargeable device to connect to When using the built-in battery power, if the battery power is less than 15%, the charging Sound Kick 2 to charge. function will be unavailable. When the system is operating by built-in battery only and charging external device at the same time, when the built-in battery power level is low, it is suggested to keep playback volume to low/medium level to avoid sudden turn off the system when the built-in battery is drained off by the external device 15 Optimizing Sound Quality TM is proprietary technology that enhances stereo separation. You can enable/disable the button, and the LED indicator will indicate UQ3 current status. UQ3 by pressing the UQ3 Status ON OFF LED indicator Using the battery power Blinks once in white Blinks twice in white Charging the battery Blinks once in green Blinks twice in green TIP: Sound Kick 2 has been tuned to a balanced acoustic profile. You can use the EQ settings on your playback device to further customize the EQ balance to suit your personal preference. Note: Some custom EQ settings when combined with UQ3 enhancement may cause distortion. TIP: For playback in Bluetooth or Aux mode, the output volume is set by both the volume control on Sound Kick 2 and the source device. Both may be adjusted to set your preferred listening volume. Typically, sound quality is best when the volume of the source device is between 70~90%. Note: As with any speaker system, if the volume on both your source device and the speaker are at maximum output, it is possible to overdrive the speakers and cause distortion. When using an iOS device or other device that offers a volume limit feature, turn this setting off for higher volume listening in Bluetooth or Aux mode. 16 Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Power does not come on No sound output The system is powered off automatically Bluetooth connection cannot be restored automatically If you find USB charging cannot perform after connecting your device to the POWER OUT port on the system Bluetooth connection cannot be established Check the Following Points When using the built-in battery, the battery power is too low. Charge the battery. AC power adapter is not inserted securely. Plug in securely. minimum. Check if the volume level of the system is set to the When in Bluetooth mode, check if the volume level of your Bluetooth device is set to the minimum or muted; check if your audio cable is connected to the AUX IN jack of the system. Unplug the cable. When in AUX IN mode, check if your external device is set to the minimum or muted. The system enters the saving energy mode. The system does not connect with any audio source for more than 45 minutes. Turn on the system again and play back an audio source. If using the built-in battery, check if the built-in battery is exhausted. Connect AC power adapter and turn on the system again. The system may be powered off and powered on when playing back a track over Bluetooth connection. You need to make the connection again. Maybe your USB cable is not supported by the system, please try to use another USB cable. The battery power of the system is less than 15%. When making a Bluetooth connection between the system and your device for the first time, if the connection is fail, you need to power off your device and power on again to clear the device name, and make the connection again. 17 Technical Specifications Model Type Support Bluetooth Support Profile Input Sensitivity Input Terminal Power Source Dimensions (Approx.) Weight SFQ-11 Sound Kick 2 Bluetooth 1.2, 2.0 and 2.1 compliant A2DP, AVRCP AUX Input External DC IN, AUX IN DC IN 9V/2A 267mm (L) x 38mm (D) x 106mm (H) TBD 1000mV (TBD) Design and specifications are subject to change without notice. 18 Save this manual
1 | Users Manual-2 | Users Manual | 141.31 KiB | December 02 2015 |
Size: 156mm x 100mm Consignes de scurit Version Canada ATTENTION NE PAS OUVRIR - RISQUE D'LECTROCUTION Le symbole de l'clair dans un triangle est destin mettre en garde l'utilisateur contre la prsence de tensions dangereuses l'intrieur du botier du produit, d'une puissance susante pour constituer un risque de choc lectrique. Le symbole du point d'exclamation dans un triangle est destin avertir l'utilisateur de la prsence d'importantes instructions d'utilisation et d'entretien dans la documentation jointe l'appareil. AVERTISSEMENTS :
POUR RDUIRE LE RISQUE D'INCENDIE OU D'LECTROCUTION, NE PAS EXPOSER CET APPAREIL LA PLUIE OU L'HUMIDIT. N'ENLEVEZ PAS LE COUVERCLE et N'OUVREZ PAS LE BOTIER. Des tensions leves dangereuses sont prsentes l'intrieur. Non rparable par l'utilisateur. Toutes les rparations doivent tre eectues par un personnel quali. IMPORTANTES INSTRUCTIONS DE SCURIT 1. Lisez attentivement ces instructions. 2. Conservez ces instructions. 3. Respectez tous les avertissements. 4. Suivez toutes les instructions. 5. N'utilisez pas cet appareil prs de l'eau. 6. Nettoyez-le avec un linge sec uniquement. 7. Ne bloquez pas les fentes d'aration. Installez l'appareil conformment aux instructions du fabricant. 8. N'installez pas l'appareil prs de sources de chaleur telles que radiateurs, registres de chaleur, poles ou autres appareils (y compris les amplicateurs) produisant de la chaleur. 9. Ne dtruisez pas la fonction de scurit de la prise polarise ou avec mise la terre. Une prise polarise comporte deux broches, l'une tant plus large que l'autre. Une prise avec mise la terre comporte trois broches, la troisime tant la broche de terre. La broche plus large, ou la broche de terre, sont l pour votre scurit. Si la prise fournie ne correspond pas vos prises secteur, demandez un lectricien de la remplacer. 10. Protgez le cordon d'alimentation pour qu'il ne soit pas cras ou pinc, particulirement au niveau de la prise de courant et au point o il sort de l'appareil. 11 Utilisez uniquement les accessoires spcis par le fabricant. 12. Utilisez uniquement avec le chariot, le pied, le trpied, le support ou la table spcis par le fabricant ou vendus avec l'appareil. Quand vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter les blessures en cas de renversement. AVERTISSEMENT RELATIF AU CHARIOT DE TRANSPORT
(Symbole fourni par RETAC) 13. Dbranchez l'appareil en cas d'orage ou si vous ne l'utilisez pas pendant une priode prolonge. 14. Toutes les rparations doivent tre eectues par un personnel quali. Un entretien est requis lorsque l'appareil a t endommag de quelque manire que ce soit, par exemple cordon d'alimentation ou prise de courant endommags, liquide renvers sur l'appareil, objets tombs dans l'appareil, exposition de l'appareil la pluie ou l'humidit, ou si l'appareil ne fonctionne pas normalement ou est tomb. 15. L'appareil ne doit pas tre expos aux claboussures et aucun objet rempli de liquide ne doit tre pos sur l'appareil. 16. La prise secteur est utilise comme dispositif de dconnexion et doit rester facilement accessible pendant l'utilisation. Pour couper l'alimentation lectrique de l'appareil, dbrancher la che de la prise murale. 17. Les piles ne doivent pas tre exposes une chaleur excessive (soleil, feu, etc.). 18. Ne placez aucune source de amme nue, telle que des bougies allumes, sur l'appareil. 19. La pile utilise dans ce produit doit tre correctement recycle ou limine. Veuillez vous adresser votre centre local de recyclage pour des instructions concernant la manipulation correcte et l'limination de la pile. Pour assurer la compatibilit entre le systme lappareil et un autre appareil avec la technologie Bluetooth, consultez la documentation de l'appareil et renseignez-vous auprs du concessionnaire. Certains pays peuvent imposer des restrictions sur l'utilisation des appareils Bluetooth. Veuillez vous renseigner auprs des autorits locales. est une marque dpose de Bluetooth SIG, Inc. Veuillez lire l'tiquette appose sous le systme pour la tension d'entre et d'autres informations de scurit. Avertissement : Tout changement ou modication apports cet appareil sans lapprobation expresse de lentit responsable de la conformit pourrait annuler le droit de l'utilisateur se servir l'appareil. Informations FCC (Commission fdrale des communications U.S.) :
Cet appareil est conforme larticle 15 du rglement de la FCC. Son utilisation est soumise aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer dinterfrences prjudiciables, et (2) il doit accepter toute interfrence reue, y compris celles risquant dengendrer un fonctionnement indsirable. Avertissements : L'appareil rpond l'exemption de l'valuation de routine des limites de la section 2.5 de la norme CNR-102 et les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux radiofrquences et la conformit auprs du reprsentant canadien Burnport Holdings Ltd 72MT Belcher, East, Calgary, Alberta, T2Z 2G1, CANADA. Tlphone : 403-257-4961 Dclarations dIndustrie Canada Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet quipement est conforme l'exposition aux rayonnements IC limites tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre le radiateur et votre corps. Remarque : ce matriel a t test et trouv conforme aux limites de l'article 15 de la rglementation FCC pour les appareils numriques de classe B. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Ce matriel gnre, utilise et peut mettre des frquences radio et, s'il n'est pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Toutefois, il n'existe aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si ce matriel cause des interfrences nuisibles la rception radio ou tlvision, ce qui peut tre dtermin en teignant l'appareil, l'utilisateur est encourag essayer de corriger l'interfrence par une ou plusieurs des mesures suivantes :
Rorienter ou dplacer l'antenne de rception. Augmenter la distance entre l'appareil et le rcepteur. Brancher l'appareil une prise de courant sur un circuit dirent de celui auquel le rcepteur est branch. Consulter le revendeur ou un technicien radio/ tlvision expriment. ATTENTION - Installation correcte Installez le systme sur une surface horizontale, dans un endroit sec et ni trop chaud ni trop froid. La temprature d'utilisation se situe entre 5C et 35C. Installez le systme dans un lieu bien ar pour viter qu'il ne surchaue. Laissez une distance susante entre le systme et le tlviseur. loignez le systme du tlviseur an d'viter les interfrences avec ce dernier. ATTENTION - Ventilation correcte Pour prvenir tout risque de choc lectrique, d'incendie, ou tout autre dommage, placez l'appareil comme suit :
Face avant : pas d'obstructions et un espace libre. Cts / dessus / arrire : aucun obstacle dans les zones indiques ci-dessous. Dessous : posez l'appareil sur une surface horizontale. Maintenez une circulation d'air susante pour la ventilation en plaant l'appareil sur un support de 10 cm (3-15/16") de haut ou plus. Vue de face :
Vue de ct :
15 cm
(5- 15/16") 15 cm
(5- 15/16") 10 cm
(3- 15/16") 15 cm
(5- 15/16") Face avant Face avant QDID: XXXXXXX 10 cm
(3- 15/16") 15 cm
(5- 15/16") 15 cm
(5- 15/16") Face arrire 15 cm
(5- 15/16") Face arrire 15 cm
(5- 15/16")
1 | Users Manual-3 | Users Manual | 127.59 KiB | December 02 2015 |
Size: 156mm x 100mm Safety Information The lightning ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNINGS:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualied service personnel. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specied by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING
(Symbol provided by RETAC) Canada IC statments This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determ ined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like. 18. Do not place any naked ame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. For compatibility between the unit and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. is a registered trademark of Bluetooth SIG, Inc WARNING! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING! Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Please read rating label at the bottom of system for power input and other safety information. FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment. CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sucient distance between the system and TV. Keep the system away from TV to avoid interference with TV. CAUTION - Proper Ventilation To avoid risk of electric shock and re, and to prevent damage, locate the apparatus as follows:
Front: No obstructions and open spacing. Sides / Top / Back: No obstructions should be placed in the areas shown by the dimensions. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm (3-15/16") or more. Front View:
Side View:
15 cm
(5- 15/16") Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation. Attention:
This symbol is only valid in the European Union. 15 cm
(5- 15/16") 15 cm
(5- 15/16") Front side 15 cm
(5- 15/16") 10 cm
(3- 15/16") By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative eects on the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal oce, your household waste disposal service or the shop where you purchased the product. QDID: XXXXXXX Front side 10 cm
(3- 15/16") Back side 15 cm
(5- 15/16") Back side 15 cm
(5- 15/16") 15 cm
(5- 15/16")
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-02-13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-02-13
|
||||
1 | Applicant's complete, legal business name |
Beautiful Enterprise Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0016059693
|
||||
1 | Physical Address |
27th Floor, Beautiful Group Tower
|
||||
1 |
77 Connaught Road Central, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
UZZ
|
||||
1 | Equipment Product Code |
SFQ11
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** L******
|
||||
1 | Title |
Product Approbation Manager
|
||||
1 | Telephone Number |
75583******** Extension:
|
||||
1 | Fax Number |
75583********
|
||||
1 |
j******@beautiful.com.hk
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
S****** L********
|
||||
1 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-76******** Extension:
|
||||
1 | Fax Number |
86-76********
|
||||
1 |
s******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
C**** W****
|
||||
1 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-76******** Extension:
|
||||
1 | Fax Number |
86-76********
|
||||
1 |
c******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Sound Kick 2 | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
D******** D********
|
||||
1 | Telephone Number |
86769******** Extension:
|
||||
1 | Fax Number |
+8676********
|
||||
1 |
d******@newbtl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0030000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC