Sound Kick SFQ-04 Safety Information The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNINGS:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 1. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING
(Symbol provided by RETAC) 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vase,shall not be placed on the apparatus. 16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 17. The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC and IC Information:
This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. if not installed and used Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 2. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd. 72MT Belcher Pls, East, Calgary, Alberta, T2Z 2G1, CANADA. Tel: 403-257-4961 FCC&IC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the exemption from the routine evaluation limits in section 2.5 of RSS 102. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters from user and bystanders. For compatibility between the SFQ-04 system and another device with Bluetooth technology, consult the device's documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. is a registered trademark of Bluetooth SIG, Inc Please read rating label at the bottom of system for power input and other safety information. CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV. CAUTION - Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
Front: No obstructions and open spacing. Sides / Top / Back: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm (3-15/16") or more. 15 cm
(5- 15/16") 15 cm
(5-15/16") Front View:
15 cm
(5-15/16") Side View:
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation. Attention:
This symbol is only valid in the European Union. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment. QDID:
Front side 10 cm
(3- 15/16") Back side 15 cm
(5-15/16")
.3. 5 5 5 6 7 7 8 8 8 8 9 9 10 10 10 11 12 13 14 Contents Getting Started Package Contents Pulling out the Extension Chamber Connecting the AC Adapter Charging the Built-in Battery Selecting the Sound Source System Overview Front View Top View Back View Playing back via Bluetooth Downloading the SoundFreaq App Using Multiple Bluetooth Devices Playing back from Macbook or Macbook Pro Playing back from PC/Notebook Playing back from External Source Optimizing Sound Quality Troubleshooting Technical Specifications
.4. Getting Started Package Contents Examine whether the following package contents are all included:
Main Unit AC Adapter Extension Chamber Pulling out the Extension Chamber Before turn on the unit, you need pull out the extension chamber rst. Use the finger notchs on the back panel to pull out the extension chamber. Note: If the extension chamber is closed, the unit will be powered off automatically. Finger Notch
.5. Connecting the AC Adapter WARNING! For optimal performance, use only the supplied AC adapter. Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection. 1. Pull out the two blades of AC adapter. 2. Connect one end of the AC adapter to the DC IN jack of the unit and the other end to an electrical outlet. 9V 2A 1 2 Electrical Outlet
.6. 8. Charging the Built-in Battery The Sound Kick has a built in Lithium coin battery to give you portable power when not using the AC adapter. When the adapter is plugged in, the unit will charge. During charging, the charging indicator next to the DC IN jack will be solid red. When fully charged, it will be turn green. When operating the unit in battery mode, a flashing red indicator means the battery is low. You must charge this unit for 12 hours before using for thefirst time. Notes:
The battery cannot be replaced by the user. It takes about 3 hours to charge the battery from empty to full. Do not dispose of unit in re; battery may explode or leak. Type: Lithium-Ion Rechargeable Battery Model No: LC18650 Rated Voltage: 3.7 V (* 1) Capacity: 2200 mAh Charging indicator 9V 2A WARNINGThere is a danger of explosion if the battery is incorrectly replaced. Replace it only with the same or equivalent type. Do not expose it to excessive heat such as sunshine,
re, etc. Selecting the Sound Source This system enables you to access two sound sources - AUX and Bluetooth. Press the SOURCE button repeatedly at Soundfreaq Remote App in Bluetooth mode or by connecting AUX audio cable to the unit/pairing a Bluetooth device with the unit simply to enjoy either sound source. 7. System Overview Front View 1 Top View 2 3 4 5 VOL 6 7 Back View 11 11 12 13 8 9 10 9V 2A
.8. 1. LED indicator 2. (Previous) / (next) button Skip to the previous or next track Bluetooth mode. in 3. (Play/Pause) button Press to play or pause a track. 4. PAIR button Put Sound Kick in pairing mode. 5. button Press to activate or deactivate the UQ3
(High Definition Wide Stereo) sound effect. 6. Vol +/- button Press to increase (+) or decrease (-) the volume level. 7. (on/Standby) button Switch between power-off and power-on modes. 8. USB power jack The jack can be used to charge most devices that allow for USB charging (including many mobile phones, smart phones and wireless headsets). Note: Please use the USB power cord that came with your device to connect to Sound Kick to charge. 9. Charging indicator To indicate the charging status. 10. DC IN jack 11. Finger notch 12. Extension chamber 13. AUX IN jack For transmitting an audio input signals from auxiliary source. Playing back via Bluetooth Downloading the Soundfreaq App Establishing a Bluetooth Connection Soundfreaq We have developed an Soundfreaq Remote App to give you full control from your Android devices while playing audio over the Bluetooth connection, please download the
"SoundFreaq Remote" in the App Store* for FREE.
* App Store is an online store where you can free download or purchase applications for your mobile devices. Apps are designed to expand the functionality of a mobile device. After paring an Android device with Sound Kick, you can download the free Soundfreaq Remote App in the Android Market and on our website:
www.soundfreaq.com When the App installation is finished, you can control the playback from your Android device. The app can be used as a remote control. Warning!
Do not unplug the AC adapter from the unit when playing back a track over the Bluetooth connection. Notes:
If your mobile phone supports A2DP protocol, its music will play through the unit. You can make a Bluetooth connection with a mobile phone, an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices. 1. Pull out the extension chamber. 2. Press the " " button to power on the unit. The indicator on front panel is solid on when the unit is powered on. 2. Press the PAIR button on top of unit to put Sound Kick in pairing mode. The indicator starts blinking at a fast rate. PAIR button Main Unit Indicator If you hold the PAIR button for more than 5 seconds during the process of pairing, the operation will be cancelled. 3. During this period, you can operate the mobile phone, iPad or Bluetooth-enabled device to pair with the unit within a 33 feet (10m) range. Please check the user manual of the iPad or Bluetooth-enabled device with which you are initiating pair to learn about Bluetooth connection with any other devices. 4. Once the unit is detected and its name
"Sound Kick" appears on the display of your Bluetooth-enabled device, key in the default password "1234" if a prompt requests it. 9. 3. Once completed, the pairing success screen will come out. Note: Dont quit the page immediately. You may notice that the previous dialog screen still shows the device not connected. Just ignore it. Its confusing to the user. In fact, its connected already. 4. Open iTune, play a song. Then use mouse to click the Bluetooth icon and the top right hand corner of the desktop screen, select the Sound Kick option and then select the Use as Audio Device (Stereo). After a while (a few seconds), the music will come out from the SFQ-04. If not, retry to select the Use as Audio Device (Stereo) once again. The Sound Quality should be good. Playing back from PC/Notebook 1. Press the Start button to open the Device and Printers dialog box. 2. Turn on the SFQ-04 system and press the PAIR button on the unit to put the unit into the pair mode. 3. Select the Add a device in the Device and Printer dialog box. The Sound Kick icon will appear on the display. 4. Double click the Sound Kick icon and wait until the device has been added successfully. 5. Click the Close button to close the Device and Printer dialog box. A Sound Kick icon appears in the dialog box. 6. Double click the Sound Kick icon and the device connection screen will be shown. 7. Click the Connect button in the Music and Audio option. 8. Once connected, the pair indicator on the unit will be solid on and the connection success screen will be shown. The indicator on front panel starts blinking quickly to indicate that the unit and your device have entered into the connection mode. After a Bluetooth connection is established successfully, the indicator will be solid on. 4. Select the desired music and press "Play"
button on your device. The unit automatically starts playing back the music. Ensure that the audio cable has been removed from the AUX jack of Sound Kick when enjoy music over the Bluetooth connection. Try again above steps 2 to 3 if the pair indicator turns solid after blinking for 3 minutes, the pair was unsuccessful. Using Multiple Bluetooth Devices Only one device can be used at a time, but you can switch between different Bluetooth devices. Make sure each device you want to use has already been paired, to switch devices:
1. On Sound Kick, press the pair button. 2. On Bluetooth device, select the connection to Sound Kick. This device is now the connected device to Sound Kick, (the previous connected device is now disconnected). Repeat those steps to switch the connected device again. Note: If the unit has no sound output, please check if the volume level of your Bluetooth device connected to the unit is set to the minimum, or the Bluetooth device is muted. Playing back from Macbook or Macbook Pro 1. In the desktop screen, Select the Open Bluetooth Preference. 2. If there is any old Sound Kick records, remove it. Click the Continue to proceed pairing process. 10. Playing back from External Source You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer the component to be connected. instruction manual of the to Connect an external device to the AUX IN jack on the back panel of the unit using a stereo audio cable (not supplied). Note: When your stereo audio cable connect to the AUX IN jack, the system will enter to the AUX mode automatically. 1. Pull out the extension chamber. 2. Turn the unit power on. 3. Set the volume to the minimum position. 4. Start playback on the external device. 5. Adjust the volume level or UQ3 sound effect to meet your listening requirement. To audio output such as CD/MD/
digital music player, etc. 11. Optimizing Sound Quality TM
"U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are. To activate UQ3 on:
The unit, press the " " button to activate, press again to deactivate. On the Remote App, press the " " button to activate and deactivate. Notes: When the U-Cubed sound effect is deactivated, the indicator will blink twice. Tip: To achieve optimal acoustic performance of Sound Kick's hi-fidelity speakers, we recommend playing your Sound Kick for four (4) continuous hours upon initial usage to condition the drivers. Tip: Sound Kick has been tuned for balanced acoustic profile. You can use the EQ settings on your playback device to customize the EQ balance to suit your personal preference. Note: Some custom EQ settings when combined with UQ3 enhancement may cause distortion. Tip: For playback via Bluetooth or Aux mode, the output volume is set by both the volume control on Sound Kick and the source device. Both may be adjusted to set your preferred listening volume. Typically, sound quality is best when the volume of the source device is between 70-90%. Note: As with any speaker system, if the volume on both your source device and the speaker are at maximum output, it is possible to overdrive the speakers and cause distortion. When using an iOS device or other device that offers a "volume limit" feature, turn this setting off for higher volume listening with in Bluetooth or Aux mode. Tip: Sound Kick is capable of reproducing a broad range of sound frequencies. Using lossless or high quality digital music files with low compression will improve acoustic performance. Note:
Sound Kick is compatible with lossless transfer of AAC files offered on iOS devices. With Bluetooth playback on an iOS device (iPod touch, iPhone or iPad) there is no degradation of the quality of the music file. 12. Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the Following Points Power does not come on. The built-in lithium battery is no power. Charge the battery. No sound output. Check if the volume level is set to the minimum. Check if the volume level of your Bluetooth device connected to the system is set to the minimum. Check if the volume level is muted. Press MUTE button on the Remote App again to restore the sound output. Check to make sure your Bluetooth device is not muted. Check if your stereo audio cable is connected to the AUX IN jack of the unit. Unplug the cable. The system is suddenly powered off. The system enters the saving energy mode. The unit does not connect with any audio source for more than 30 minutes. Turn on the system again and play back an audio source. No sound output is via Bluetooth or Bluetooth connection cannot be restored automatically. If you find USB charging cannot perform after connecting your device to the USB jack on the unit. Bluetooth connection cannot be established. The unit may be powered off and powered on when playing back a track over Bluetooth connection. You need to make the connection again. Maybe your USB cable is not supported by the system, please try to use another USB cable. When making a Bluetooth connection between the unit and your device for the first time, if the connection is fail, you need to power off your device and power on again to clear the device name, and make the connection again. 13. Technical Specifications Model SFQ-04 Type Sound Kick Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile Input Sensitivity/Impedance A2DP AUX Input 200 mV Input Terminal Power Source AC Adapter External DC IN (for AC adapter), AUX IN DC 9 V 2 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 9 V 2 A Dimensions (Approx.) 267mm (W) * 106mm (H) * 42mm (D) Weight 704 g Design and specications are subject to change without notice. 14. 13 Jan 2012 Consignes de scurit Version Canada ATTENTION NE PAS OUVRIR - RISQUE D'LECTROCUTION Le symbole de l'clair dans un triangle est destin mettre en garde l'utilisateur contre la prsence de tensions dangereuses l'intrieur du botier du produit, d'une puissance suffisante pour constituer un risque de choc lectrique. Le symbole du point d'exclamation dans un triangle est destin avertir l'utilisateur de la prsence d'importantes instructions d'utilisation et d'entretien dans la documentation jointe l'appareil. AVERTISSEMENTS :
POUR RDUIRE LE RISQUE D'INCENDIE OU D'LECTROCUTION, NE PAS EXPOSER CET APPAREIL LA PLUIE OU L'HUMIDIT. N'ENLEVEZ PAS LE COUVERCLE et N'OUVREZ PAS LE BOTIER. Des tensions leves dangereuses sont prsentes l'intrieur. Non rparable par l'utilisateur. Toutes les rparations doivent tre effectues par un personnel qualifi. IMPORTANTES INSTRUCTIONS DE SCURIT 1. Lisez attentivement ces instructions. 2. Conservez ces instructions. 3. Respectez tous les avertissements. 4. Suivez toutes les instructions. 5. N'utilisez pas cet appareil prs de l'eau. 6. Nettoyez-le avec un linge sec uniquement. 7. Ne bloquez pas les fentes d'aration. Installez l'appareil conformment aux instructions du fabricant. 8. N'installez pas l'appareil prs de sources de chaleur telles que radiateurs, registres de chaleur, poles ou autres appareils (y compris les amplificateurs) produisant de la chaleur. 9. Ne dtruisez pas la fonction de scurit de la prise polarise ou avec mise la terre. Une prise polarise comporte deux broches, l'une tant plus large que l'autre. Une prise avec mise la terre comporte trois broches, la troisime tant la broche de terre. La broche plus large, ou la broche de terre, sont l pour votre scurit. Si la prise fournie ne correspond pas vos prises secteur, demandez un lectricien de la remplacer. 10. Protgez le cordon d'alimentation pour qu'il ne soit pas cras ou pinc, particulirement au niveau de la prise de courant et au point o il sort de l'appareil. 11. Utilisez uniquement les accessoires spcifis par le fabricant. 12. Utilisez uniquement avec le chariot, le pied, le trpied, le support ou la table spcifis par le fabricant ou vendus avec l'appareil. Quand vous utilisez un chariot, soyez prudent lorsque vous dplacez l'ensemble chariot / appareil pour viter les blessures en cas de renversement. 13. Dbranchez l'appareil en cas d'orage ou si vous ne l'utilisez pas pendant une AVERTISSEMENT RELATIF AU CHARIOT DE TRANSPORT
(Symbole fourni par RETAC) priode prolonge. 14. Toutes les rparations doivent tre effectues par un personnel qualifi. Un entretien est requis lorsque l'appareil a t endommag de quelque manire que ce soit, par exemple cordon d'alimentation ou prise de courant endommags, liquide renvers sur l'appareil, objets tombs dans l'appareil, exposition de l'appareil la pluie ou l'humidit, ou si l'appareil ne fonctionne pas normalement ou est tomb. 15. L'appareil ne doit pas tre expos aux claboussures et aucun objet rempli de liquide ne doit tre pos sur l'appareil. 16. La prise secteur est utilise comme dispositif de dconnexion et doit rester facilement accessible pendant l'utilisation. Pour couper l'alimentation lectrique de l'appareil, dbrancher la fiche de la prise murale. 17. Les piles ne doivent pas tre exposes une chaleur excessive (soleil, feu, etc.). 18. Ne placez aucune source de flamme nue, telle que des bougies allumes, sur l'appareil. 19. La pile utilise dans ce produit doit tre correctement recycle ou limine. Veuillez vous adresser votre centre local de recyclage pour des instructions concernant la manipulation correcte et l'limination de la pile. Pour assurer la compatibilit entre le systme SFQ-04 et un autre appareil avec la technologie Bluetooth, consultez la documentation de l'appareil et renseignez-vous auprs du concessionnaire. Certains pays peuvent imposer des restrictions sur l'utilisation des appareils Bluetooth. Veuillez vous renseigner auprs des autorits locales. Bluetooth est une marque dpose de Bluetooth SIG, Inc. Veuillez lire l'tiquette appose sous le systme pour la tension d'entre et d'autres informations de scurit. Avertissement : Tout changement ou modication apports cet appareil sans lapprobation expresse de lentit responsable de la conformit pourrait annuler le droit de l'utilisateur se servir l'appareil. Informations FCC (Commission fdrale des communications U.S.) et IC (Industrie Canada) :
Cet appareil est conforme larticle 15 du rglement de la FCC. Son utilisation est soumise aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer dinterfrences prjudiciables, et (2) il doit accepter toute interfrence reue, y compris celles risquant dengendrer un fonctionnement indsirable. Dclaration de la FCC et dIC sur lexposition aux irradiations :
Cet quipement est conforme aux limitations prvues par la FCC pour lexposition aux irradiations dans le cadre dun environnement daccs libre et est en conformit avec lexemption dvaluation de routine des limitations de la section 2.5 de la CNR-210. 1. Cet metteur ne doit pas tre situ proximit ou fonctionner simultanment avec une autre antenne ou metteur. 2. Cet quipement est conforme aux limitations prvues par la FCC pour lexposition aux irradiations RF dans le cadre dun environnement daccs libre. Cet quipement doit tre install et mis en fonctionnement une distance minimale de 20 cm de lutilisateur et des personnes qui lentourent. Remarque : ce matriel a t test et trouv conforme aux limites de l'article 15 de la rglementation FCC pour les appareils numriques de classe B. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Ce matriel gnre, utilise et peut mettre des frquences radio et, s'il n'est pas install et utilis conformment aux instructions, peut causer des interfrences nuisibles aux communications radio. Toutefois, il n'existe aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si ce matriel cause des interfrences nuisibles la rception radio ou tlvision, ce qui peut tre dtermin en teignant l'appareil, l'utilisateur est encourag essayer de corriger l'interfrence par une ou plusieurs des mesures suivantes :
Rorienter ou dplacer l'antenne de rception. Augmenter la distance entre l'appareil et le rcepteur. Brancher l'appareil une prise de courant sur un circuit diffrent de celui auquel le rcepteur est branch. Consulter le revendeur ou un technicien radio/ tlvision expriment. Avertissements : L'appareil rpond l'exemption de l'valuation de routine des limites de la section 2.5 de la norme CNR-102 et les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux radiofrquences et la conformit auprs du reprsentant canadien Burnport Holdings Ltd 72MT Belcher, East, Calgary, Alberta, T2Z 2G1, CANADA. Tlphone : 403-257-4961 ATTENTION - Installation correcte Installez le systme sur une surface horizontale, dans un endroit sec et ni trop chaud ni trop froid. La temprature d'utilisation se situe entre 5C et 35C. Installez le systme dans un lieu bien ar pour viter qu'il ne surchauffe. Laissez une distance suffisante entre le systme et le tlviseur. loignez le systme du tlviseur afin d'viter les interfrences avec ce dernier. ATTENTION - Ventilation correcte Pour prvenir tout risque de choc lectrique, d'incendie, ou tout autre dommage, placez l'appareil comme suit :
Face avant : pas d'obstructions et un espace libre. Cts / dessus / arrire : aucun obstacle dans les zones indiques ci-dessous. Dessous : posez l'appareil sur une surface horizontale. Maintenez une circulation d'air suffisante pour la ventilation en plaant l'appareil sur un support de 10 cm (3-15/16") de haut ou plus. Vue de face :
Vue de ct :
15cm
(5-15/16") 15cm
(5-15/16") 15cm
(5-15/16") Face avant Face arrire 15cm
(5-15/16") 10 cm (3- 15/16") QDID: