Size: 130x150 mm Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic Getting to know Sound Rise Classic Setting the Alarm 1 Turn the ALARM SET knob on the side of the unit in the direction of arrow until the desired wakeup alarm time is shown. 2 Slide the ALARM switch to ON position to complete the alarm setting. 3 Slide the WAKE TO switch to select the alarm sound among RADIO/BT/AUX/BEEP modes. 1 ALARM SET Standby mode Bluetooth mode Radio mode Aux mode Indicates if Sleep timer is set Displayed during volume setting Flashed when alarm goes off with BEEP sound Displayed when alarm is snoozed Displayed when backup battery is low FM/MHz FM/MHz Displayed when radio is on ALARM SET TIME SET Setting the Time Turn the TIME SET knob on the back of the unit in the direction of arrow until correct time is shown. TIME SET Notes:
To wake up to music from your phone or other devices, you must first pair Sound Rise Classic. To wake up to radio, you must first set the desired radio station. When waking up to Bluetooth or AUX IN, Sound Rise Classic will play the current song on your connected device. If your device is not available or not playing back when the alarm goes off, Sound Rise Classic will wake you with the built-in chime after a while. Setting the Alarm Volume The default alarm volume is set at maximum. To adjust your desired wakeup alarm volume level, you can 1 Press POWER button to switch off the unit first. 2 Press and hold ALM VOL button for 3 seconds to display the current alarm volume level. 3 Press +/- buttons to adjust to the desired alarm level. 4 Press ALM VOL button again to confirm. Notes:
It is recommended to set the alarm to a higher/maximum volume level on your device and on the clock radio. Please test the alarm sound level to make sure it is loud enough for waking up. Do not set the volume too low on your device for alarm wakeup purpose. Using the Alarm 1 When the alarm goes off, slide the ALARM switch to turn the alarm off. 2 If you prefer to get some more sleep after the alarm goes off, press button while alarm is sounding. You can also press the button repeatedly to set the snooze duration to 10->20->5 minutes. The alarm sound will be temporarily paused and Z will be shown on the display. You can repeat snooze up to 12 times. SNOOZE / LIGHT SNOOZE / LIGHT 3 WAKE TO ON 2 ALARM 2 4 ALM VOL 3
/+
1 POWER OFF ALARM SNOOZE / LIGHT Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic Quick Start Guide Sound Rise Classic Play Control Volume 2 Press the POWER button to turn on the unit. 3 Press the SOURCE button repeatedly until AUXappears on the display to select Aux In mode. Using the Speaker 1 Plug in the power adaptor (included). 2 Insert 1x AA(1.5V ) backup battery (included) observing the correct polarity and replace the battery cover. 3 Press the POWER button to turn the speaker on. 4 Press the SOURCE button repeatedly to select the audio sources.(The indication of audio source will display on the screen.) FM Radio(FM) Bluetooth(BT) AUX IN(AUX) 5 Press +/- to set the volume. 6 Press the POWER button again to turn the audio off.
/+
SOURCE POWER Polarity Power Adaptor Using the Backlight Press button to momentarily turn the light on the dial on for 5 SNOOZE / LIGHT seconds. Bluetooth Pairing 1 Press the POWER button to turn on the unit. 2 Press the SOURCE button repeatedly until BT appears on the display to select Bluetooth mode. 3 Press PAIR on Sound Rise Classic to start pairing mode. The BT indication on Sound Rise Classics display will flash rapidly. 4 On your phone, tablet or computer, open your Bluetooth setting menu to detect available devices. Tap to select Sound Rise Classic from the list of devices in Bluetooth settings. On most devices, no password is needed to pair, however, if a password is requested, the default password is 1234. SNOOZE / LIGHT PAIR SOURCE POWER Notes:
To pair another new device or disconnect a device that has already been paired, simply press and hold the PAIR button on Sound Rise Classic for 3 seconds and BT indication will flash rapidly again, and select Sound Rise Classic on your new device. Listening via Bluetooth 1 Press the POWER button to turn on the unit. 2 Press the SOURCE button repeatedly until BTappears on the display to select Bluetooth mode. 3 You can change the volume by either using the volume buttons on the Sound Rise Classic or changing the volume on your paired device. For max volume, turn both volumes to maximum. 4 Use the Play Control buttons on Sound Rise Classic to remotely control your connected devices and to play, pause and skip tracks. Listening with Radio 1 Extend the FM antenna on the back of the unit to full length. 2 Press the POWER button to turn on the unit. 3 Press the SOURCE button repeatedly until FM appears on the display to select Radio mode. 4 Press the <</>> buttons to search a desired radio station for listening.(Long press for station scanning.)
<</>>
Programming Radio Presets There are SIX radio presets to save your favorite FM stations. To save a preset:
1 Tune to the preferred station. 2 Press and hold the PRESET button. The preset number will flash P01. 3 Press +/- to change the preset number. 4 Press PRESET button again to save the current station to the preset number selected. 5 To select a stored preset station to listen, press to walk through the stored stations. Notes: Press PRESET button to toggle between the displaying preset station number and the preset station frequency. Listening with AUX In 1 Connect any device with a standard headphone jack using an Aux In cable (not included) to the AUX IN on the back of Sound Rise Classic. SOURCE POWER FM antenna SOURCE
<</>>
POWER PRESET
/+
AUX IN Plug Using the Sleep Timer Use SNOOZE/LIGHT button to set a timer to listen to music while falling asleep. 1 Press and hold the button for 3 seconds to enter sleep SNOOZE / LIGHT timer. Press repeatedly again to set the timer duration: 15, 30, 60, 90, 120, OFF. SOURCE POWER 2 The SLEEP icon will be shown on the display. Tap button will show the remaining time after sleep timer is activated. 3 To turn the sleep timer off, press and hold the button for SNOOZE / LIGHT SNOOZE / LIGHT 3 seconds and SLEEP icon will disappear. SNOOZE / LIGHT Charging an External Device You can charge most phones as well as other USB chargeable devices directly from Sound Rise Classic. Simply connect your device to the USB Port on the back of Sound Rise Classic to begin charging. Notes: The maximum charging output of Sound Rise Classic is 5V / 1A. Using UQ3 Sound Enhancement Press the UQ3 button to turn on/off the UQ3 effect for music enjoyment. The U ON will display when UQ3 is activated. Press UQ3 button again to deactive the effect. Replacing Battery When the power of backup battery is low, the low battery indication will flash to indicate the alert of battery replacement. Please replace it immediately to avoid leakage of battery. USB Charging Port UQ3