SOLVING SLEEP USER GUIDE Mobile device compatibility What this package contains iPhone 5 and above, iPod (5th generation), iPad 2 and above. List of compatible Android devices at www.beddit.com 1. The Beddit Sleep Tracker 2. Power adapter 3. User Guide 2 1 3 Beddit is not a medical device and should not be used to diagnose or treat medical condi-
tions. Consult your doctor for prevention, di-
agnosis and treatment. Beddit should only be used with the included power adapter. Beddit is a registered trademark of Beddit Ltd. iPhone and iPod touch are trademarks of Ap-
ple Inc., registered in the U.S. and other coun-
tries. All other trademarks are the property of their respective owners. Patented, patents pending. Designed and engineered in Finland. Made in China. Beddit Ltd., 2016. QUICK GUIDE Follow these steps to install the Beddit Sleep Tracker in your bed. 1 2 3 3. Download the app Download the Beddit app for your smartphone from the App Store or Google Play. Launch the application and follow the on-screen instruc-
tions to start your first sleep measurement. Additional resources and services For troubleshooting and frequently asked ques-
tions, you can browse our extensive Help Center at support.beddit.com If you have further questions about anything related to Beddit, its use, results and so forth, contact us at support@beddit.com 1. Tuck it in The positioning of your Beddit Sleep Tracker de-
pends on your bed setup. To achieve the best results place your Beddit Sleep Tracker under your top bed sheet at right under your heart on the part of the bed where youll be sleeping, be it on the side if you sleep with someone, or in the middle of a big bed in which you sleep alone. It is recommended you first try out the optimal positioning before placing the Beddit Sleep Tracker under the sheet:
If you sleep alone in the bed, place the Beddit Sleep Tracker so that it extends fully (about 31.5 inch in, 80 cm) onto the mattress If you sleep alone in a wide bed, place the Beddit Sleep Tracker so that it covers the area where you normally sleep. If two people sleep in the bed, place the Bed-
dit Sleep Tracker so that there is a 6-inch gap
(15 cm) between the midline of the bed and the Trackers end. With beds over 63-inch wide
(160 cm), the gap may be wider You can later re-adjust the placement to find the optimal spot in your bed. 2. Plug it in After you have planed the Beddit Sleep Tracker onto your mattress, fold the bed sheet back into its original place. Plug the Beddit Sleep Track-
er into the USB-power plug provided. Beddit must be plugged into this power source in or-
der to work. Care instructions Instructions for how to properly take care of your Beddit Sleep Tracker and maximize its life. 1. Clean the topside of the Sleep Tracker with a damp cloth if needed. 2. Do not wash the Sleep Tracker in a washing machine or dry it in a dryer. Doing so will ruin it and void your warranty. 3. Do not try to repair the sensor, cable or power adapter. There are no parts that can be safely repaired at home. Contact us if you need help with your Beddit Sleep Tracker. If there is a de-
fect covered by the warranty, we will replace the defective part or refund your money. See the warranty terms and limitations. 5. When making your bed, be careful with the Sleep Tracker and the power cable to avoid damaging them. If you have an adjustable mattress or rollaway bed, do not fold the Sleep Tracker and cable into the bed. Do not allow the Sleep Tracker or cable to be folded up or tan-
gled in your bedding. 6. Your Beddit Sleep Tracker includes a power adapter. Use it for powering the Sleep Tracker. Using the USB port on a laptop or other elec-
tronics could result in power variation or dam-
age to the Sleep Tracker or your electronics or data. Plugging the power cable into your elec-
tronics is at your own risk. Visit support.beddit.com for latest updates and information. Important safety information Read and understand these warnings. Failure to follow them could result in death or serious injury. 1. The Beddit Sleep Tracker is not a medical de-
vice. It is not designed or intended to diagnose or treat any medical conditions, and you should not use it for these purposes. Consult your doc-
tor for prevention, diagnosis, and treatment of sleep disorders and other medical issues. 2. Be careful when placing the cable of the Sleep Tracker to avoid trip hazards. 3. Do not use the Beddit Sleep Tracker with in-
fants or children. Death or injury could result from the sensor or power cable getting around an infants or childs neck during their sleep. 4. Similarly, if your sleeping habits put you at risk of entangling a bedside cord or an un-
der-sheet sleep tracker around your neck while sleeping, do not use a Beddit Sleep Tracker. 5. The Beddit Sleep Tracker is not a baby mon-
itor. It will not warn you of any sleeping prob-
lems your infant may have. It will not warn you if your infant stops breathing. It will not warn of or prevent sudden infant death syndrome. 6. Do not use the Beddit Sleep Tracker around water or other liquids. Like any electrical device, there is an electrocution hazard if you get the Beddit Sleep Tracker wet while it is plugged in. 7. Do not disassemble the Beddit Sleep Track-
er or power adapter. There are no repairs that you can safely do on them. See use and care in-
structions on how to replace the adhesive tape. Limited warranty This Limited Warranty is applicable globally ex-
cept in the United States of America. Your Beddit Sleep Tracker consists of a Blue-
tooth-enabled sensor, a USB power adapter and a mobile app, which you must download separately. This Limited Warranty covers only the sensor and power adapter. You have legal rights under applicable nation-
al legislation governing the sale of consumer goods. Those mandatory rights are not affected by this Limited Warranty. See translations of the warranty terms in your language and the war-
ranty terms for the United States of America at www.beddit.com DECLARATION OF CONFORMITY We, Beddit Ltd. Of Kimmeltie 3, 2110, ESPOO, FINLAND Declare under sole responsibility that the product /equipment we manufacture:
Brand name: Beddit Model Name B3 To which this declaration relates, is in conformity with the following standard(s) or other normative document(s) EN 301 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);
EN 300 328 V1.9.1 IEC 60950-1:2006 ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Information technology equipment - Safety - Part 1: General requirements FCC, General rules and regulations FCC part 2 v 10-1-13 FCC part 15 v 10-1-13 FCC, Radio Frequency device The Technical Construction File is maintained at:
Company: Beddit Ltd. Company address: Kimmeltie 3, 02110 ESPOO, Finland The authorized representative located within the Community is:
Name: Henry Rimminen Title: Hardware Lead Date of issue: 27.06.2016 Place of issue: ESPOO, FINLAND Legal signature:
The following sections present the compliance statements for different geographical areas:
NORTH AMERICA United States: Federal Communications Commission (FCC) FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions:
(1) This device may not cause harmful interfer-
ence, and (2) this device must accept any in-
terference received, including interference that may cause undesired operation. INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a resi-
dential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encour-
aged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver. Connect the equipment to outlet on a cir-
cuit different from that to which the receiv-
er is connected. Consult the dealer or an experienced radio/
TV technician for help. WARNING:
The changes or modifications not expressly ap-
proved by the party responsible for compliance could void the users authority to operate the equipment. FCC ID: 2AI4U-B3 Canada: Industry Canada (IC) IC COMPLIANCE STATEMENT:
This device complies with Industry Canada li-
cense-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired opera-
tion of the device. This Class B digital apparatus complies with Ca-
nadian ICES-003. Cet appareil est conforme avec Industrie Cana-
da exempts de licence standard RSS (s). Lutili-
sation de ce dispositif est autorise seulement aux conditions suivantes: (1) il ne doit pas pro-
duire de brouillage et (2) lutilisateur du disposi-
tif doit tre prt accepter tout brouillage ra-
diolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionne-
ment du dispositif. Cet appareil numrique de la classe B est con-
forme la norme NMB-003 du Canada. IC ID: 21700-B3 EUROPEAN UNION European Union (CE) CE COMPLIANCE STATEMENT:
Hereby, Beddit Oy, declares that this product is in compliance with the essential requirements and other relevant provisions of Directives 2004/108/EC
(EMC), 2006/95/EC (LVD), 2011/65/EU (RoHS) and 1999/5/EC (R&TTE). Test Report: pending AUSTRALIA + NEW ZEALAND ACMA:
N1246 (R-NZ) www.beddit.com support@beddit.com