8193URF Quick Installation Guide Important Information For more detailed information, please refer to the Help file in the Driver CD in the Help directory. The ways to display Help file are as follows:
- After driver installation, please click the driver icon at the right-bottom in the Window system tray. Click the Help button on the left-bottom of the driver Configuration dialog box and the help file will pop up. Or
- Please see Help\ Help.htm in the Driver CD. Hardware Installation 1. 2. Make sure the batteries of the keyboard and mouse are installed Plug in the receiver connector into your available USB port on PC. correctly, please follow the polarity signs in the battery compartment. Front View of Back View of USB Connector USB Connector Pairing Procedure The pairing button locates on the top of the receiver with a LED under to show the pairing or data reception status. The ID-recognition function helps to protect against interference from other RF products in the same environment. Remember to pair ID when other RF products affect your keyboard kit. 1. ID Button(LED) top of Pairing button on the the receiver (With a the LED under pairing button) Press the pairing button on the top of the receiver first. Receiver LED will blink slowly indicating its ready to receive keyboard/mouse pairing information. Next, press the pairing button on the bottom of the mouse once. Then press the pairing button on the top of the receiver again. Finally, press the pairing button on the bottom of the keyboard 2. 3. 4. Receiver LED flashes 3 times rapidly as indication its paired with this keyboard and mouse. Note:
- The whole procedure should be complete within 60 seconds.
- Make sure your PC is on and running when doing the pairing procedure.
- Every time you want to reset each one of the receiver, mouse or keyboard ID, you must follow the procedures above to set all IDs again. Pairing button on the bottom of the keyboard Pairing button on the bottom of the mouse Driver Installation
USB Device Driver The USB device driver is included in Windows operating system. During initial installation of the USB device, the system will automatically detect a new hardware being added, and then bring up "Add New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this installation step is completed the basic functions of the USB device will work under the operating system. The additional functions are provided only after the KeyMaestro application is installed.
KeyMaestro Input Device Driver 1. Insert the CD labeled "EMPREX" into your CD-ROM. 2. The CD will automatically run and bring up the Setup dialogue box. 3. Follow the on-screen instruction to install the driver. 4. The driver icon will show at the right-bottom of the Windows system tray when the driver is loaded. English 8193URF QIG 3100506090 Version 1.0 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment. FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Information to user:
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment is intended for use in the following countries EU 18 countries:
Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Spain, Sweden, United Kingdom, Portugal, Greece, Switzerland, Norway, and Iceland. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and could be used in the intended application as described in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.