Instructions Before using the product, please read the instructions carefully and keep them properly. Product introduction This wireless charger uses a new technology. The combination of science and technology with nature brings you an extraordinary texture. Before using the product, please read the instructions carefully and keep them properly. Charging area Power Interface Packaging components Indicator light Instructions 10W wireless charger X 1 Type-C USB cable X1 QC3.0 Adapter X1 Instructions X1 Attention This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause undesired operation changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 80x120(mm) Specifications Input: DC 5V/2A 9V/1.67A Output: 5V/1A 9V/1.1A Charging Distance: <8mm Charging efficiency: > 75%
Quality certification: QI/FCC/CCC/CE/RoHS Supporting Fast Charging: QC2.0/QC3.0 Compatibility: Compatibility with QI Safeguard Over charge protection Over voltage protection Over current protection Product compatibility Supporting iPhone 8, iPhone 8 plus; Samsung Galaxy series
(S8+, S8, S7, S7dge,S6, S6dge, S6ege+, Note5, Nexus 4/5/6, etc. safety protection smart chip wide compatibility wireless charging Over power protection Short-circuit protection Over heat protection Optimum charging position The QI standard wireless receiver device is positioned in center of the wireless charger. Frequency bands Frequency Band H-Field 111.38kHz to 148.08kHz
-20.19 dBA/m @ 10m distance Guidelines for Use Insert the Type-C USB plug into the power interface. After the plug is connected to the power supply, the red and blue lights will turn on 0.5S at the same time and then turn off, indicating that the product is in standby state. Place the wireless charger smoothly. Place the QI standard wireless receiver facing the wireless charging center. The blue light starts to breathe and flicker, that is, charging normally. Supports Samsung 10W, Apple 7.5W, ordinary 5W wireless charging. When an abnormal state occurs, the indicator lights are red and flashing. Instructions Before using the product, please read the instructions carefully and keep them properly. Product introduction This wireless charger uses a new technology. The combination of science and technology with nature brings you an extraordinary texture. Before using the product, please read the instructions carefully and keep them properly. Charging area Power Interface Packaging components Indicator light Instructions 10W wireless charger X 1 Type-C USB cable X1 Instructions X1 Attention Do not use or place this product in high temperature or humid environment. Do not expose to sunlight. Do not throw this product into fire or water, in order to avoid leakage, short circuit or other faults. Do not cover the product with paper or other objects. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Specifications Input: DC 5V/2A 9V/1.67A Output: 5V/1A 9V/1.1A Charging Distance: <8mm Charging efficiency: > 75%
Quality certification: QI/FCC/CCC/CE/RoHS Supporting Fast Charging: QC2.0/QC3.0 Compatibility: Compatibility with QI Safeguard Over charge protection Over voltage protection Over current protection Product compatibility Supporting iPhone 8, iPhone 8 plus; Samsung Galaxy series
(S8+, S8, S7, S7dge,S6, S6dge, S6ege+, Note5, Nexus 4/5/6, etc. safety protection smart chip wide compatibility wireless charging Over power protection Short-circuit protection Over heat protection Optimum charging position The QI standard wireless receiver device is positioned in center of the wireless charger. Frequency bands Frequency Band H-Field 111.38kHz to 148.08kHz
-20.19 dBA/m @ 10m distance Guidelines for Use Insert the Type-C USB plug into the power interface. After the plug is connected to the power supply, the red and blue lights will turn on 0.5S at the same time and then turn off, indicating that the product is in standby state. Place the wireless charger smoothly. Place the QI standard wireless receiver facing the wireless charging center. The blue light starts to breathe and flicker, that is, charging normally. Supports Samsung 10W, Apple 7.5W, ordinary 5W wireless charging. When an abnormal state occurs, the indicator lights are red and flashing.