Rotatable Angle96~65 6 25 Manual Installation instructions 1.Please confirm that the expansion bolt is suitable for the current ground environment. 2.Attach the positioning sticker to the installation location. 3.The four positioning holes on the corresponding sticker are opened at the mounting position
(recommended aperture 10mm, depth 70mm), used to fix expansion bolts and remove positioning stickers. 4.Unscrew the five screws on the bottom plate to remove the bottom plate and fix the four expansion bolts and the bottom plate to the ground. 5.Place the base and the weight in the position corresponding to the bottom plate, fix the four weight fixing screws (M4*18) together. 6.Fix the four counterweight cover fixing screws (M4*10) with the weights. Counterweight cover Counterweight Expansion bolt Counterweight cover fixing screw Base 100-240V~/1.5A/50-60Hz Audio LAN USB
+
-
Power Counterweight fixing screw Dimensions (Unitmm) Positioning Sticker bottom plate Bottom plate screw 0 7 2 1 305 170 Port Description Relay_NC Relay_NO Relay_COM Relay Wiegand RS232 RS485 RS232
+12VDC IN 100-240V~/1.5A/50-60Hz Audio LAN USB
+
-
Power GND WG_D1_I WG_D0_I GND WG_D1_O WG_D0_O GND RS232_RX_2 RS232_TX_2 GND RS485_A RS485_B GND RS232_RX_1 RS232_TX_1 Position Adapt to height range Screen rotation angle 90 75 65 90 75 65 90 75 65 Recognizable height L(cm) 126-157 140-170 150-192 112-162 132-188 151-217 102-172 128-202 151-251 Distance from person to identification terminal W(cm) 50 70 90 Specification L w Product Number Living Security Recognition Distance Verification Method Face Comparison Time Capacity OS Camera Display Operating temperature Relative Humidity Dimensions Power Cord Rating BRD-ST-SD1 Support 30-180cm 1:1, 1:N, 1:1/1:N 1:N Comparison Time0.3s/p 20000 Android 7.0 Professional Wide-angle Dual Camera (Visible Light & Infrared) 8.0inch Touch LCD800*1280
-10 ~ 55 5%-95%(Non-condensing) 305*170*1270 mm DC 12V 3A or AC 100-240V~/1.5A/50-60Hz Communication Method Physical Interface Power On Wi-Fi 2.4 GHz/5 GHz5.15GHz-5.25GHz;5.725GHz-5.825GHz IEEE 802.11a/g/b/nIEEE 802.11ac BT4.1+BLE Support Bluetooth Ethernet RS232*2USB2.0*1RS485*1Audio Jack*1RJ45*1Wiegand TX*1 Wiegand RX*1Relay*1 Support Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China. 317-00488-01