FCC ID: 2AG53YKQ01FM Radio Controller

by: BEIJING FIMI TECHNOLOGY LIMITED latest update: 2016-07-05 model: YKQ01FM

Two grants have been issued under this FCC ID on 07/05/2016 (this is one of four releases in 2016 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked drivers, warrantee terms, troubleshooting guides, password defaults, & instructions.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 11
1 ~ 2016-07-05 10
2 ~ 2016-07-05 10

app s				submitted / available
1 2	TempConfidential YKQ01FM-User Manual-2016-07-05	Users Manual	pdf	2.23 MiB	May 07 2016 / January 01 2017
1 2		Test Report	pdf		May 07 2016
1 2		RF Exposure Info	pdf		May 07 2016
1 2		Internal Photos	pdf		May 07 2016 / January 01 2017
1 2		External Photos	pdf		May 07 2016 / January 01 2017
1 2		Test Setup Photos	pdf		May 07 2016 / January 01 2017
1 2		Cover Letter(s)	pdf		May 07 2016
1 2		Cover Letter(s)	pdf		May 07 2016
1 2		Cover Letter(s)	pdf		May 07 2016
1 2		ID Label/Location Info	pdf		May 07 2016
1 2		Test Report	pdf		May 07 2016

exhibit
download
text

1 2

TempConfidential YKQ01FM-User Manual-2016-07-05

Users Manual

pdf

2.23 MiB

May 07 2016 / January 01 2017

Quadcopter Manual Please read and keep this manual carefully before using. Attention

. Quadcopter could be dangerous; it is designed to be used by adults over 18 years old

. Keep enough distance between Quadcopter and people, animals, trees, vehicles or buildings when using it. Be away from dangerous circumstances such as airports, railways, high ways, tall buildings or electric wires etc. According to relevant laws and regulations, the flying height of this Quadcopter should be below 120m and the distance between the operator should be under 500m. Users should take responsibility for any damage of components or system causing by not following this user guide. Scan & Install Quadcopter App

. Beginners Guide Online Map Real-time Aerial Videos and Images 2 Products & Accessories 1. Quadcopter Motor Auxillary Positioning Module(Pro Only) Undercarriage Lock Undercarriage 3 Battery Compartment Light Products & Accessories 2. Radio Control Normal Flight/Auto Return Mode Switch Button B Belt Hole Cellphone Holder Left Stick Left Roller Button A Right Stick Power Battery Indicator Auto Take-off/Landing Button Right Roller Micro-USB Charging Port USB Port(Connect Radio Control and Cellphone) 4 Antenna Products & Accessories 3. Integrated Gyro-Stabilized Gimbal & Camera

(Pro Only) Shock-Absorbing Frame Connection Indicator Camera Lens Shooting Indicator Rotate Upwards TF Card Port Micro-USB Port 5 Products & Accessories 4. Accessories for Quadcopter 5. Tool Box x 2 Self-Tightening Propellers Clockwise & Anti-Clockwise x 4 Protective Frame USB Cable x 12 Quadcopter Battery Battery Charger 1 wrench, 1 screwdriver and screws 6 Prepare 2. Charge the Radio Control 1. Charge the Quadcopter Battery 5V 2A

. Connect charger to power to charge the battery. After charging is completed, indicator will be turned off. Indicator Power High Low 100240 V After charging is completed, indicator will stay on.

* Both port of battery on the sides could be used 7 Indicator Low High Assemble & Disassemble 1. Assemble the Quadcopter a. Undercarriage Undercarriage Lock Turn the undercarriage till it clicks;

Undercarriage will be locked automatically. Turn and hold the undercarriage lock to unlock position;

Pull up the undercarriage. 8 Assemble & Disassemble c. Protective Frame b. Integrated Gimbal & Camera(Pro Only) TF Rotate the camera upwards;

Plug in TF Card.

* Please choose TF cards of mainstream brands, Class 10 and 16G at least. Gimbal Assemble Switch

. Use screws and screwdriver in the Tool Box to assemble. Every Protective Frame needs 2 screws. keep Turn and the Gimbal Assemble Switch;

Remove gimbal cover. the the Keep Gimbal Assemble Switch and assemble the gimbal. 9 Assemble & Disassemble d. Propellers Color Mark Disassemble Assemble

. Put propellers on the motors by different Color Marks;

Rotate propellers by assemble directions. Propellers will tighten automatically during flying. 5. Quadcopter Battery

. Push the Quadcopter Battery hard into the Battery Compartment till it clicks. Push the Battery Assemble Switch then the Battery could be pulled out Battery Assemble Switch 10 Assemble & Disassemble 1. Connect Radio Control & Cellphone a. Put Down the Antennas

. The rotatable angle of antennas is as this figure. Turn antennas 90 degree to Radio Control. Turn antennas upside down and keep parallel. 11 Assemble & Disassemble b. Connect Radio Control & Cellphone Pull out Cellphone Holder. Open the cover on bottom. Pull out Cellphone Holder; the lower edge of holder will pop up. Set cellphone on the holeder; Be careful not to hit the power of cellphone. Open the cover on bottom of Radio Control. Use the USB Cable to connect Radio Control and 12 Operation Guide 1. Head Direction Head Direction White Red White Green

. The color of Quadcopter Lights is as this figure. The Head Direction is in between two white lights. 13 2. Power on Quadcopter & Radio Control

. Press power once to check the electrical quantity. Press power once, then long-press for 2 seconds to power on. on/off. Operation Guide 3. Radio Control Sticks Up Anti-Clockwis Head Direction Forward Anti-

Clockwise Right Up Forwar Clockwise Left Down Left Stick Backwar Right Stick Left Clockwise Backward By default, left stick is used to control Quadcopter to move up and down, a.k.a "American Way". Down The way of control could be changed in App. 14 Operation Guide 4. Take-off & Landing by Radio Control Pull Slowly Left Stick Right Stick Push left stick upward slowly and steadily Left Stick Right Stick 1. Pull two sticks to the max into shape V and hold for 3 seconds;

Propellers will start to rotate. 2. Release the stick after propellers' rotating. 3. Push left stick upward slowly and steadily over half;

1. Pull left stick downwards slowly and steadily;

Quadcopter will start to land. 2. Hold the stick downwards after the undercarriages touch the ground. Propellers will stop in 5 seconds. 15 Operation Guide 5. Radio Control Shortcuts

. 16 When the Quadcopter is flying, turn Normal Flight/Auto Return Mode Switch to the right;

Quadcopter will return near takeoff point and land automatically. the to During return, turn back the Switch to left;

Quadcopter will hover. the Light When Auto Take-off/Landing Button is white, the Button could be used for making the Quadcopter take off or land. of When the Quadcopter is stopping at a flat surface, press the button once, then long-press for 2 seconds;

Quadcopter will take off automatically. When the Quadcopter is flying, press the button once, then long-press for 2 seconds;

Quadcopter will land automatically. Operation Guide 6. Integrated Gimbal & Camera(Pro Only) 90

. A B 17 Gimbal and camera will be turn on after poweing if assembled. the Quadcopter on Turn up and down the left roller of Radio Control, the camera lens will turn up and down in between the range as the figure. Release the left roller, camera lens will stay at the position. After turning on camera, the Butto A on Radio Control could be used to take a photo and the Button B could be used to take a video. Operation Guide 7. Get Videos & Images Use App to get real-time aerial videos and images, control camera and download to cellphone. 8. Adjust Quadcopter Head Lights Brightness Turn up and down the right roller of Radio Control to adjust two white lights' brightness on the head of Quadcopter. 9. Operation Tips At any moment during Quadcopter' flying, release two stick of Radio Control; Quadcopter will hover. Maintain & Calibrate 1. Propellers Propellers are fragile. Replace propellers with new ones immediately when it abrases to prevent affecting the flying performance. 2. Self-Test & Compass Calibration

. Quadcopter and Radio Control will self test after power on. Check self-test results and calibrate compass following the steps in App. 18 Regulatory Notice for Users in EU Hereby, Fimi declares that the wireless equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. WEEE Disposal and Recycling Information 19 Federal Communications Commission Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult an authorized dealer or service representative for help. Fimi is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party:

20 NameIntegrated Gimbal Camera Regulatory Notice for Users in USA USA Federal Communications Commission (FCC) This device are granted with following FCC ID by Federal Communications Commission (FCC) FCC ID: 2AG53YTXJ01FM FCC ID2AG53FXQ01FM NameMi Drone FCC ID: 2AG53YKQ01FM RF exposure warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. ModelYTXJ01FM ModelFXQ01FM ModelYKQ01FM NameRadio Controller SAR Statement(only apply to FCC ID: 2AG53YKQ01FM IC: 21054-YKQ01FM NameRadio Controller ModelYKQ01FM) SAR Dclaration This equipment complies with FCC&ISED SAR limits ,the highest SAR value reported to the FCC and ISED for this device is 0.059W/kg. Cet quipement est conforme aux limites FCC&ISED SAR, la valeur SAR la plus leve rapporte la FCC et ISED pour cet appareil est 0.059W / kg. 21 Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Regulatory Notice for Users in Canada This device are granted with following IC ID by Industry Canada (IC ) IC: 21054-YTXJ01FM NameIntegrated Gimbal Camera IC: 21054-FXQ01FM NameMi Drone IC: 21054-YKQ01FM NameRadio Controller ModelYTXJ01FM ModelFXQ01FM ModelYKQ01FM IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 22 IC RF Exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 23

		frequency	equipment class	purpose
1	2016-07-05	2426.2 ~ 2461	DSS - Part 15 Spread Spectrum Transmitter	Original Equipment
2		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX

Application Forms

app s	Applicant Information
1 2	Effective	2016-07-05
1 2	Applicant's complete, legal business name	BEIJING FIMI TECHNOLOGY LIMITED
1 2	FCC Registration Number (FRN)	0025173162
1 2	Physical Address	1#Complex Building,Yongtaiyuan Jia,Qinghe,Haidian
1 2		Beijing, N/A
1 2		China

app s	TCB Information
1 2	TCB Application Email Address	h******@acbcert.com
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	2AG53
1 2	Equipment Product Code	YKQ01FM

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	Y**** Z****
1 2	Title	PM
1 2	Telephone Number	010-6********
1 2	Fax Number	010-6********
1 2	E-mail	z******@fimi.cn

app s	Technical Contact
1 2	Firm Name	QuieTek Technology (Suzhou) Co.,Ltd.
1 2	Name	H** Z****
1 2	Physical Address	No.99 Hongye RD.Suzhou Industrial Park
1 2		SuZhou, 215006
1 2		China
1 2	Telephone Number	86-05******** Extension:
1 2	Fax Number	86-05********
1 2	E-mail	h******@quietek.com.cn

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	01/01/2017
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DSS - Part 15 Spread Spectrum Transmitter
1 2	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Radio Controller
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	Yes
1 2	Grant Comments	Power Output is conducted. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR values are < 0.1 W/kg. This device contains WLAN Repeater.
1 2	Grant Comments	Power Output listed is conducted. This 5G WLAN Repeater is used only with transmitters manufactured by grantee. Power out of this device is not dependent on the input level. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The highest reported SAR values are < 0.10 W/kg. This device has a 20 MHz and 40 MHz Bandwidth and it contains the FHSS transmitter.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	DEKRA Testing and Certification (Suzhou) Co., Ltd.
1 2	Name	J**** P******
1 2	Telephone Number	86-51******** Extension:
1 2	Fax Number	86-51********
1 2	E-mail	j******@quietek.com.cn

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2426.20000000	2461.00000000	0.0285100
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	38 CC	5745.00000000	5825.00000000	0.0256400

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2AI4T-XSAD Shenzhen Xhorse Electronics Co., Ltd. 2BFSY-K11 Dongguan Sinbon Electronic Technology Co.,LTD OWLQ161 Vanstone Electronic (Beijing) Co., Ltd. IHDT56AR7 Motorola Mobility LLC 2BFNC-MP500 Shenzhen Muxin Intelligent Technology Co., Ltd.