Please read the instruction manual carefully before using the product Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Welcome to ROOME The Roome Mini Plus allows you to use the Roome APP to control the lamp remotely; schedule alarms; program night light sensitivity, etc. Additionally, the lamp will use its Smart Lamp Technology to intelligently learn your preferences for brightness, sensitivity to motion, and many other useful features. PLEASE NOTE If you should have any problems with your Roome Mini Plus, before you return it to the store, you should allow our freindly customer support staff to assist you. You can find FAQ; Helpful Hints; and methods of obtaining further assisance at:
http://www.myroome.com/index.php/support
* The ROOME Mini Light has both a Mini and Mini Plus model. These insrutions apply to either model. When there is a dierence, more specic guidance will be provided.
* To get the best user experience and access to the lastest feaures, please connect the lamp to the ROOME APP via Bluetooth.
- 1 -
Product Overview a Front b Back Start Using A Power On / O C Manual Control E Roome APP Control Start: Press the Power button for 2-seconds; or press it 3-times. Shutdown: Press the Power button 3-times. ON / OFF: Press the Power button on the back. To adjust the brightness: Press and hold the "Power button. The brightness will cycle. When released, the current brightness is selected. Scan the QRC code below, or search for Roome in the App Store. Lamp Infrared Sensor Lamp Infrared Sensor Leather sling Lock Charging base Power Indicator Photosensitive sensor Power Button Power Supply Interface Available on the AppStore Download for Android Scan to download the APP. Mini Plus Mini Plus Power on- Press & Hold for 2-sec Power on / o: Press 3-times Press: ON / OFF Press and Hold: ADJUSTS the brightness
* The APP supports iOS 8.0 and Android 4.3 and above TM smart made simple Leather sling Lock Power Indicator Photosensitive sensor Mini
- 2 -
Power Button Power Supply Interface Mini
- 3 -
B Correct Placement D Reset To optimize intelligent-control capabilities, the lamp should be placed facing the active area and have no obstructions to the front sensors. Press the Power button 5-times to initiate a reset. The indicator will
ash to indicate reset is commencing, and will light continuously for 3-seconds when the reset is complete. When using for the rst time, follow prompts wihin the APP to establish a Bluetooth connection. This will permit remote control from your mobile phone; You will be able to set schedules and timing-related control features; motion detection sensitivity; and many other intelligent-learning functions. Found Bluetooth Devices Found Bluetooth Devices The lights are listed in order of their distance from you. Please click to connect. The lights are listed in order of their distance from you. Please click to connect.
* Infrared sensing range 180 Press Power 5-times to restore factory settings
- 4 -
- 5 -
- 6 -
Add Manufacturer:
Address:
Beijing HOMI Technology Co., Ltd A109, RCDL Industrial Park Tower B, No.5, Guangshun North Rd., Beijing, China Website: http://www.myRoome.com Phone:
+86 400 178 2155