FCC ID: 2AANYIG5 Edge computing gateway IG502

FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands is country dependent and firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s): Operation is subject to the following Two conditions:

(1) this device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareildoit accepter tout brouillage radiolectrique subi, mme si le susceptible d'en compromettre le fonctionnement. brouillage est CAN ICES-3 (B) Avis dIndustrie Canada Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorise aux deux conditions suivantes:

1) I'appareil ne doit pas produire de brouillage; et 2) I'utillsateur de I'appareil doit accepterbrouillage radiolectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil. Cet appareil numriquie de la classe B est conforme la norme NMB-003 du Canada. CAN NMB-3 (B) Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.

Edge Computing Gateway www.inhandnetworks.com FCC ID: 2AANYIG5S 1G502 Contain FCC ID: XMR201909EG91NAX FQ33 GF5012022000024 00:18:05:12:E9:B8 866041044568795 Input: 9-35V, Power: 6W IP: 192.168.1.1 User/Password: adm/123456 Made In China g InHand Networks Technology Co., Ltd.

Beijing InHand Networks Technology Co., Ltd. Agent Authorization Company: Beijing Inhand Networks Technology Co., Ltd. Address: Room 501, floor 5, building 3, yard 18, ziyue road, chaoyang district, Beijing Model Number(s):

IG502,IG512,IG562,IG572,IG582,IG592,IG504,IG514,IG564,IG574,IG584,IG594,IG501, IG511,IG561,IG571,IG581,IG591 Product Description: Edge computing gateway IG502 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021/01/18 Signature:

Name:

Jichi Gu Title:

Certification Engineer Company: Beijing InHand Networks Technology Co., Ltd.

Declaration letter Beijing InHand Networks Technology Co., Ltd. For our business issue and marketing requirement, we would like to list different models numbers on the FCC & IC certificates and reports, as following:

Dear Sir, Test Model No.:IG502 Series Model No.:

FCC:IG512,IG562,IG572,IG582,IG592,IG504,IG514,IG564,IG574,IG584,IG594, IG501,IG511,IG561,IG571,IG581,IG591 IC:IG512,IG572,IG504,IG514,IG574,IG501,IG511,IG571 The above series models are the same in these: appearance,PCB layout and basic software function;The only difference is that the products are used in different markets. Thank you!

Signature:

Printed name/title:Jichi Gu/ EMC engineer Address:Room 501, floor 5, building 3, yard 18, ziyue road, chaoyang district, Beijing

Beijing InHand Networks Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/01/18 Subject; Request for Confidentiality FCC ID: 2AANYIG5 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM List Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jichi Gu Title: Certification Engineer