FCC ID: 2AANY-IG974 Edge computing gateway IG974

i Edge Computing Gateway www.inhandnetwork Foc D2AANY-574 Model: 1G974 Contain Foc xZ0108E CSA FE oye P/N: FQ38 O] 1c}

S/N: GL9742022000024 =

MAC: 00:18:05:12:E9:B8-B9 IMEI: 866041044568795 INPUT: 12-48V Power: 6W WAN/LAN: 192. 168. 1. 1/192. 168. 2.1 ps4 User/Password: adn/123456 Made In China

( DATE :01.2021 Manufacturer: InHand Networks }

Beijing Inhand Networks Technology Co., Ltd. FCC Software Configuration Control Declaration Date: February 21, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number:IG974 Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Jichi Gu Date: 2023-02-21 Title: Certification Engineer Signature of applicant:

IG974_FCC Software Configuration Control Declaration Rev 1.1.docx

Beijing Inhand Networks Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AANY-IG974 Date: 2023-02-21 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices Rev 2.1 FCC Software Configuration Control Declaration Rev1.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jichi Gu Title: Certification Engineer

Declaration letter Beijing InHand Networks Technology Co., Ltd. Dear Sir, For our business issue and marketing requirement, we would like to list different models numbers on the FCC& IC certificates and reports, as following:

Test Model No.: IG974 FCC Certificate Series Model No.:

IG904,IG914,IG924,IG934,IG944,IG954,IG964,IG984,IG994 IC Certificate Series Model No.:IG944,IG954,IG984 These models are the same in these:appearance,PCB layout and basic software function;The only difference is that the products are used in different markets. Thank you!

Signature:

Printed name/title:Jichi Gu/ EMC engineer Address:Room 501, floor 5, building 3, yard 18, ziyue road, chaoyang district, Beijing