Beijng Landwell Electron Technology Co, Ltd FCC statement:
different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV This device complies with part 15 of the FCC Rules. technician for help. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, The First Chapter including interference that may cause undesired This system is made up of patrol reader/communication operation. line /Checkpoint/software. The accessories include the Changes or modifications not expressly approved by the computer and printer. Specific steps are as follows. L-3000EF Proximity Guard Tour System Manual authority to operate the equipment. party responsible for compliance could void the user's This product has passed ROHS certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to Important Announcement provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy 1, Thanks for purchasing Landwell L-3000EF proximity and, if not in-stalled and used in accordance with the 1. System Directions:
1.1) Patrol reader, also called collector, is carried by patrol man during patrol rounds. Each checkpoint guard tour system. Please read the manual carefully instructions, may cause harmful interference to radio collection time and patrol man name etc will be collected before use. When you begin to use L-3000EF guard communications. as one piece of data, which is saved after analysis. tour reader, Landwell believes that you have read this However, there is no guarantee that interference will not Then data will be uploaded to computer through manual carefully. 2, As the related contents of the manual may change without prior notice, the products shall prevail. For more information please check the company website www.guard361.com/or call us +86-01-84717640. 3, As this is a mobile patrol product, we strongly measures:
occur in a particular installation. If this equipment does communication line. cause harmful interference to radio or television 1.2) Transmitting line: also called communication line, it reception, which can be determined by turning the arranges the data within the collector and transmits equipment off and on, the user is encouraged to try to correct the interference by one or more of the following them to the computer. 1.3 ) Information tagcheckpointThe information tag is divided into checkpoint tag and personnel tag. recommend that you create data backup when using. Data loss caused from hardware damage is excluded Reorient or relocate the receiving antenna. One information tag can only be setup as checkpoint tag Increase the separation between the equipment and or personnel tag. It cannot be setup as a personnel tag from the warranty, which is only effective for hardware receiver. after it is already a checkpoint tag. itself. Connect the equipment into an outlet on a circuit 1.3)a checkpoint tag: according to patrol plan, a checkpoint tag stands for a patrol point, which is placed evenly at the rate of 11,spread it on the back of the Edit the checkpoint name following the reading order. at the patrol site or equipment. Through software the patrol tag. Paste the patrol tag to the patrol point(like the Another way is before checkpoint tag installation, use information tag can be setup as different checkpoint surface of cement ,hard brick wall or other strong object. reader to collect all the tags ID number. It is better to name which it relates to. Choose flat surface before pasting the tag. If the surface write down the ID number by its last 5 to 6 digits 1.3)b personnel tag: this is the patrol mans ID tag. is coarse, use sand paper to polish it.) together with the point name it stands for. This is to Some tasks are carried out according to group of patrol link the tag ID number in the software with the man. Every group shares one reader. Every patrol man carries his own personnel tag so a reasonable patrol 3. Software Setup and Usage checkpoint tag. performance check is attainable. Please read the software manual carefully before System Installation and Usage Considerations 1.4) Software management system it analyzes software installation. Familiarize with the software step the related data uploaded and after data processing, it by step. The software administers access is Admin, the 1) Let the reader's LED face you. Hold the reader like offers detailed patrol report. The software will match the default pin is 333. a pen with hand and arm at a 90 degree angle. patrol report with plan, and correctly process the patrol 3.1) Information tag setup: operate according to 2) Place the patrol reader with the checkpoint tag result data. 2. Hardware Directions software requirement and the client demands :patrol surface at a 45 degree angle. When the reader's LED record upload first clear the old data in the reader lights 3 times and the beeper sounds, data collection is through communication line.(by transmitting the data to done. (If it is noisy on site, you can reread the tag to computer after connecting reader with computer ,the make sure data is collected. If the LED lights once, it 2.1) Patrol reader: when patrol man reaches the reader's stored data is cleared. The data can be shows the first time reading is successful.) planned site, he presents the reader head to the retransmitted to software if the reader does not read 3) Please transmit correct tag ID number for checkpoint tag within 5cm distance (the tag frequency new tag. If new tag is read, the new data will cover all checkpoint and personnel setup, and input correct name decides the distance).When the reader sends out the old data and it becomes the first new data for each checkpoint and personnel. Each tag number
"beep" sound and the LED lights 3 times(the same tag record).Then use this reader to read all the checkpoint and related checkpoint or personnel is unique. One cannot be reread continuously with the same reader. tags in order. Now upload these data to the related information tag can only be setup as a checkpoint or One minute is the minimum interval before reread. The checkpoint setup or personnel setup. personnel tag, it cannot be both at the same time. LED will light once when reread without proper time Specific operation method is as follows 4) If the data collected are less than 10,000 pieces interval ),it means the data is collected to the reader a Plan setup: According to the client's situation, setup after patrol, all the data can be uploaded through the successfully. the patrol route points, where the patrol tags will be communication line. The data will automatically be 2.2) Communication line: connect communication line fixed. cleared during transmittance. The reader can transmit USB head to the computer USB port, the other side to b Tag reading: after checkpoint tag is installed, use the the data again if it does not read new data. This function the reader corresponding port. reader without data to read all the tags once, then avoids data loss if problem occurs. 2.3) Information tag: first stir super glue(like AB glue) upload the data to the checkpoint setup from software. 5) Do not read data more than the reader's capacity
(10,000 pieces of data) when collecting data. When you read the 10,000th data, the reader will not work. You Contact us should upload all the data Room 811,Guanglu Mansion, No. Jia 6 Huguang Middle 6) Please change battery if the reader's beeper sound Street, Wangjing, lowers or the LED lights for long time. Chaoyang District, Beijing, China 7) Please select serial port code after the reader Website: http://www.guard361.com connects with computer properly. E-mail: beijinglandwell@gmaill.com 8) If the communication line is not properly connected Tel: 86-01-84717640
(for data reading), the software will show different prompts (check software manual for more information). 9) Checkpoint tag installation site should be free from electromagnetic interference and strong static (for example, checkpoint tag should not be installed on aluminum composite panel, metal object, or in the place where there is carpet on floor). 10) Please do not change the battery at random to avoid problem. Contact us for battery change. Standard unique battery (1 set of 3.6V lithium battery) must be used. Once you violate the provisions, you should bear all the consequences. Directions 1) Landwell does not make any other express or implied warranties, including the product marketability and its applicability in some special field except the warranties expressed in this service commitment. 2) Landwell or its authorized service agency has the ownership and right of disposal for the faulty part after it is replaced with good one in repair. 3) Landwell has the final power of interpretation of the above contents.