RS a (4 Naan dei La ecerel aa]
Intro kisslink Smart kisslink Zen Button The Zen Button provides 2 functions:
1. Resolve Connectivity Issues. If you experience network issues including Internet speed slowdown, webpage connection problems, gaming lag, oF proximity authentication errors, pressing the Zen Button will notify kisslink to automaticaly diagnose and resolve these comman network prablems, This feature ensures that you receive the best Wi-Fi experience possible 2. Reset kisslink to Factory Settings. Holding the Zen Button down for 10 seconds results in a factory reset of kisslink. The LED light will turn green during this process. All existing settings will be erased.
@ Syncing Panel
@ LED Indicator Light
@ Zen Button
@ Micro-USB Power Port
@ Ethernet Port
@ Cord Slit LED Indicator Colors Initial setup mode Green: Factory reset mode Blue (Ambient): Ready mode (normal operation) Blue (Flashing): 1. PPPOE logging in 2. Range extender connecting Blue (Bright): 1. PPPOE log-in successful 2. Range extender setup successful Information 1. kisslink Modes 1) Primary Router: use kisslink as your primary router by entering your PPPoE log-in credentials provided by your Internet service provider. 2) Secondary Router: use kisslink as a range extender or additional access point Range Extender Mode: plug only the micro-USB cable into kisslink and place it anywhere in your home to expand your WiFi coverage.
@ DHCP Mode: plug kisslink into your existing router via Ethernet to use kisslink as an AP. While Kisslink is in range extender mode, the unoccupied Ethernet port can be used to connect wired devices for direct access to your network. 2. Device Authentication When kisslink is in normal operation (LED light: ambient blue), there are two SSIDs online
(KSLINK****** and KSLINK******X) ready for use. Open the Wi-Fi/WLAN selection page on your device and bring the device close to the syncing panel on kisslink, the blue LED light will begin to flash Wait for kisslink to indicate that authentication is complete via a beep. This process should take 1-5 seconds depending on your device. You'll now be able to connect to KSLINK******, If you wish to connect to KSLINK******X which has a password, please install the kisslink App from App Store. 3. Initial Setup Popups There are two possible popups that could appear when your device is the first to connect to kisslink:
a PPPoE popup or an existing networks popup. If kisslink is used as the primary router, a PPPoE Popup may appear on your device requiring your log-in information. If kisslink is used as a secondary router, an existing networks popup requesting access to a current Wi-Fi network will appear. On Android, these pages can be accessed via a notification. If the pages do not automatically appear on your device, please open your browser and type in any URL, you will be taken to the corresponding page.
@ PPPoE Mode t 1. Connect kssink to a power It forthe LED Indicator to 3. Join the'KSLINK*****"
and Internet source via the turn from orange (setup) to blue network and a PPPOE p Micro-USB and Ethernet (ready), Openthe W-FIWLAN or notifeation should cables selection page on your device and bring the device cl Syncing panel to authentication is com)
@ Range Extender Mode Network
> KISS HOME. a ss Password 1. Connect kssink toa 2, Wait forthe LED indicator to turn 3, Join the KSLINK*****
power source via from orange (setup) to blue (ead), network and an existing networks Micro-US8, Open the WL-Fi/WLAN selection page popup or notification should on your device and bring the device appear. Choose the current Wi-Fi close to the syncing panel to be authenticated. A beep will indicate to, hat authentication is complete DucP Mode Connect the ksslink with the first router,and there is no need to set up. network you wish to link Kisslink asa 4 Complete the loin process whieh should take 5-30, message will appear. You are now free to enjoy the wonders of the Internet STATION CONFIGURATION SUCCEEDED Connect tothe existing W-Fi network. This process should take 5-30 seconds. A completion message wil appear. You have how expanded Wil coverage and improved Wi-Fi signal in your hhome or office Advanced Features
= Auto-Lan Once your first kisslink is set up and connected to an Internet source, additional kisslink routers only need to be plugged into af a power source. Simply use a device that's already connected U to the current kisslink network to tap the additional kisslink routers you wish to link. They will automatically connect with the existing kisslink network and significantly boost your Wi-Fi coverage.
= App Functionality Features such as changing Wi-Fi network names, adding/removing SSIDs, allocating administrator access, altering PPPoE log-in info, switching existing Wi-Fi networks, approving/forgetting/banning devices, DNS, etc. can be done through the kisslink app. There will also be additional device and router management functions available.
= Tech Specs Input Power:
Operating Frequency: 2400~2483.5MHz Operating Temperature: 0C +40
(fully assembled system) Storage Temperature:-20C +70C More information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation v i Account: kiselink hat Oficial Download Android App