P1:
P2:
Instruction
Dear users, thank you for choosing SleepUp. In order to ensure the effective use of
various functions of this product, please read the instruction carefully before using it.
Product and supporting instructions 03
Power supply and connection 05
Wear with patch 07
Wear with headband 09
Charging and carrying 11
Product specifications and precautions 13
P3:
Product and supporting instructions
SleepUp
7 pieces of medical sleep patch
Headband
P4:
Product and supporting instructions
Charging box
USB charging cable
Instruction
P5:
Product and supporting instructions
Download the SleepUp app in the App Store and complete the registration according
P6:
to the notes.
Press the switch button until the SleepUp indicator starts flashing.
Connect SleepUp according to the steps.
P7:
Wear with patch
side of the product
1. Tear off the strip paper on one side of the medical sleep patch and stick it on the inner
the eyebrows
2. Tear off the remaining stripping paper and stick the product on the forehead above
Attention: If there are allergies and other discomfort symptoms during wearing the
product, please stop wearing it immediately; Do not wear on traumatic skin.
P8:
3. The effect after wearing is shown in the following figure.
PDisposable patches meet the medical quality inspection standards: MA, ilac-MRA,
PCNAS test standard certificates; Biology of medical devices
PStimulation and skin sensitization test
PGB/T16886-10: 2005 Test Report
P9:
Wear with headband
figure.
Without using a patch, cover the headband on the device as shown in the following
Clamp the device on the headband.
P10:
After wearing,it is shown in the following figure.
Charging and carrying
P11:
correctly.
When charging, turn off the equipment first, and then put it back into the charging bin
If the battery runs out, put it back in the charging bin for 1 hour.
After the equipment is put back into the charging box, if the equipment light is always
on, it means that the equipment is charging; When the equipment lights up and then go
out, it means that the equipment is full of electricity.
The charging box can charge the equipment twice. After two nights of use, or the light
of the equipment put into the charging box does not light up, it is necessary to charge
the charging box in time.
P12:
Storage bags can be convenient to hold the equipment and accessories.
P13:
Product specifications and precautions
P13:Product configuration: wearable brain-computer equipment
P13:Model/specification: SleepUp
P13:Safety classification: Internal power supply DC 4.2V BF type
P13:Communication mode: BLE 5.0 years
P13:Rated power consumption: 236mW
P13:Battery life: 9 hours
P13:Battery capacity: 600mAh
P13:Battery capacity of charging box: 1200mAh
The medical sleep patch provided by the product uses medical grade bio-glue, but if
there are allergies and other discomfort symptoms during wearing this product, please
stop wearing it immediately; Do not wear on traumatic skin. Users who have concerns
about this can use SleepUp products through matching headbands.
Do not use or charge this product in humid environments (e.g. near a bathtub filled with
water, a shower room with steam or a swimming pool with water).
This product and charging box contain magnets. Please make sure that the pacemaker
is away from magnets. People who wear pacemakers or have other devices implanted
in their bodies stay away from magnets. When using or touching magnets, the above-
mentioned persons should seek medical advice from experts.
Do not insert metallic materials into the charging hole of the product to avoid short
circuit.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
connected.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.