User_Manual 1. Product name AbbreviationPMA Full namePrinceton MicArray 2. Product model PMA1.0 3. Accessory check PMAdevice1Power Adapter1 4. Product feature introduction The product isone type of AI device can be used in meeting room. The main application scenariosas belowduring a meetingthe product capture voice fromparticipantsvia the mic array andrecord video via the fisheye lens at the same time. Device will transmit audio /
video streaming to the cloud end and then process the datait will do auditory localization and face recognition to identify the speakers in the meetingand then Convert speech into textoutput the meeting minutes finally. 5. Appearance illustrate 6. Hardware specification Hardware Specification Category Item Description Remark Appearance Dimension ConeHeight300mm,bottom165mmtop32mm Black AP AmbarellaS5L66 4*A53@1GHz Sensor SonyIMX226 Platform Wifi module AP6356 OS Linux Lens Fisheye lens Single fisheye lens190 wide-angle Display Rope Light LED indicate for work /mute/standbyetc Key*4 volume adjustmentmutevoicecontrol Key/Port Reset key at the bottom of the device Ethernet port Ethernet RJ45 Gigabit Lan USB USB2.0 Audio Speaker 1*10W MIC 6+1*MEMS MIC Power supply Battery No battery Power 12V2AAmerica standard power adapter Wirelessconnection WiFi 802.11b/g/n/ac 2.4GHz/5GHz 7. Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Anychanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2ASEF-PMA10