FCC ID: 2AP98-JYKQJHQPR1 Jya Fjord Pro Air Purifier

Jya Fjord Pro Air Purifier User Manual 1-12 Instrucciones del Purificador de Aire de Jya Fiordo Pro 14-26 READ AND SAVE THESE INSTRUCTIONS 01 WARNING When the power cord is damaged, it must be replaced with a genuine power cord purchased from the manufacturer or after-

sales service department. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Make sure the purifier is turned off and unplugged before performing the maintenance. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device. Precautions Turn off and unplug the purifier before moving it. 02 The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly. Maintain a distance of at least 20 cm between the air inlets and walls or other objects. The purifier must be placed on firm and flat floor. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains. Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth. Remove dust, hair, and particles from the purifier's air inlets to prevent a reduction of air intake. Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a long time. To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:

Do not excessively pull, twist or bend the power cord, as this may expose or break the cord's core. The power cord must be plugged into a suitable electrical outlet. Use the power cord that is provided with the purifier, do not use any third party power cords. Always unplug the purifier before carrying out maintenance to or moving the air purifier. Immediately stop using the purifier when it makes unusual sounds, gives off bad odors, overheats, or its fan rotates irregularly. Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets. Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets. Do not sit on, lean on or tilt the purifier. When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate sufficiently to avoid carbon monoxide poisoning. Do not pour liquids, nor throw powders or other small substances into the purifier's air outlet. Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:

Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, multipurpose torches, candle lighters, or fire pans. Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers, electric stoves, electric irons. Make sure no inflammable objects get into the purifier. In unstable locations where the purifier can easily fall over. In environments that are extremely hot, humid, or damp, such as bathrooms. Product Overview Read this manual carefully before use, and retain it for future reference. 03 Fan Grille Touch Display Screen Gas Sensor Laser Particle Sensor Release Button Air Inlets Air Quality Indicator Power Switch Front View Rear View Filter Compartment Cover Power Port Air Quality Indicator The indicator will display green, yellow, orange or red according the worst value of PM2.5TVOC PM10. Green Yellow Orange Red Excellent Good Moderate Unhealthy Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements. Installation Remove the filter packaging before turning on the purifier. 04

>20cm

>20cm Placing the purifier For optimal performance, make sure the distances between purifier's air inlets and other objects such as walls meet the requirements as suggested below. Note: For optimal air purification, keep doors and windows closed during use. Connecting to an electrical outlet. Connect the power cord to the power port at the bottom of the purifier and then plug it into an electrical outlet. How to Use 05 73.4 Power On/off Interface Temperature &

Humidity Interface After connecting the power cord, turn on the power switch on the back of the device. Power On/off After the power switch is turned on, the starting screen will be displayed and the main unit will enter standby mode. Touch the icon to turn on the device. Note: After the main unit has been in standby mode for 1 minute, the temperature and humidity will be shown on the display. You can touch the display to return to the starting screen. How to Use Tip: The main screen interface can be switched by swipe left and right 06 PM10 Interface PM2.5 Interface POLLEN and TVOC indicator Green Yellow Orange Red Excellent Good Moderate Unhealthy Operation Modes Automatic: Automatically switch modes according to the indoor air quality. Sleep: Ultra-low noise for a comfortable sleeping environment. Favorite: Set and save the coverage area and the purifying efficiency in the app. PM2.5 Value Excellent 1-20 g/m3 Good 21-35 g/m3 Moderate 35-55 g/m3 Unhealthy 55 g/m3 Wi-Fi Indicator Note: PM10 refers to coarse particles have an aerodynamic diameter ranging from 2.5 to 10m (PM10PM2.5). Examples of coarse particles include dust, pollen, spores, and fly ash. How to Use 07 Operation Modes Interface Tap the mode icon to cycle through 3 operation modes: AutomaticSleep Favorite. Press on main screen 1 3 2 4 Swipe left and right Settings Interface Swipe down to enter the Power On/Off interface Swipe left and right to switch each setting interface, click on the corresponding interface to set. 1 3 Air outlet angle Touch it to switch between the three different air outlet angles Resetting Wi-Fi Perform Wi-Fi resetting disable and enable. 2 4 Screen brightness adjustment Click to adjust 4 levels of screen brightness. Filter lifespan Displaying filter remaining life Tip: After the screen is off, click to wake up the screen. How to Use Resetting Wi-Fi Resetting Wi-Fi When unable to connect the purifier to the app, swipe right on the main screen to enter the Wi-Fi setting interface, click "Reset" to confirm. When the Wi-Fi icon on the screen flashes, the reset is successful. Enabling/Disabling Wi-Fi Swipe right on the main screen to enter the Wi-Fi setting interface, click "Disable" / "Enable", and then click "Confirm" to disable or enable Wi-Fi function. 08 Filter status notification Filter installation notification The purifier does not detect the filter or the filter installed is not genuine one. Filter replacement notification When the filter life is less than 10%, the screen will prompt to replace the filter after power-on, and after 5 seconds, it will jump to the interface of filter replacement. Note: The filter may produce odors when it absorbs excessive harmful gases. It is recommended to store the filter in a place with good lighting and ventilation to improve the activity of the activated carbon and restore its particle adsorption capacity. Please replace the filter when its recommended service life is due. How to buy a new filter Scan the QR code or visit smartmi official store https://www.smartmiglobal.com/filters/jya-fjord-

filter-pro for more information. Filter and Filter Replcement Instructions Filter instructions Filter It is recommended to replace the filter every 612 months. Filter replacement 09 Warning: Make sure to turn off the air purifier and disconnect power before replacing the filter. 01 Opening the filter compartment Press and hold the release buttons to open the filter compartment cover. 02 Removing the old filter Pull the strap and remove the filter. 03 Installing the new filter Remove the packaging bag. Place the new filter, and close the filter compartment cover. Notes:

Replace the filter in time according to the filter life notification. Please purchase genuine and compatible filters from official channels 10 Intelligent Control with Apple HomeKit 1 2 Open the Home app on your iPhone/iPad. Tap "Add Accessory" and then scan the HomeKit setup code on the product sticker (two stickers on the device unit, see illustration), or enter the eight-digit setup code above the HomeKit Setup Code. The device will then be linked to the Apple Home app. The device can be linked to Smartmi Link after linking to HomeKit. Go to the Personal Info page on Smartmi Link. Tap "HomeKit Info" and then link the HomeKit device as prompted. Devices linked to Smartmi Link can also be added to HomeKit. Go to the Device Control page on Smartmi Link. Tap "Add to HomeKit" in "Settings" and then link the device to HomeKit as prompted. Note:

Please ensure that your Wi-Fi network is both available and has Internet access. Place your phone as close to this product as possible.

(This product does not support 5G networks). To control this accessory which is compatible with HomeKit, it is recommended to use iOS 13.0 or a later version. Please keep the HomeKit setup code, as you will need to scan the code to link the device to HomeKit after a factory reset. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system. Linking the Device to Smartmi Link This product has been linked to the Smartmi Link and can be controlled using the app. Scan the QR code or search for

"Smartmi Link" on the app store to download and install the app. Go to the app's homepage, click "+" in the middle of the page, then add the device as prompted. Note:

Please ensure that your Wi-Fi network is both available and has Internet access. Place your phone as close to this product as possible. (This product does not support 5G networks) This product will be listed as "Jya Fjord Pro Air Purifier " in the app's device listing.

* If you need more detailed instruction, please visit:

https://www.smartmiglobal.com/pages/helpcenter HomeKit Setup Code 11 Care & Maintenance Warning: Make sure the purifier is turned off and unplugged before performing the following operations. Cleaning the filter compartment To ensure optimal ventilation and purification, use a vacuum cleaner to remove any dust from the air inlets and the filter compartment, or wipe these areas gently with a soft cloth. Note: To avoid damaging the purifier, do not rinse or spray the filter compartment directly with water, or wipe it with a soaking wet cloth. Cleaning the laser particle sensor Use a non-sharp tool to open the cover of the laser particle sensor, then use an air blow gun or hair dryer to clean the filter on the cover and the sensor, as illustrated in the figure. Note: Do not use hot air. 12 Specifications Product Name Jya Fjord Pro Air Purifier Model JYKQJHQPR1 Rated Voltage Rated Frequency Rated Power Color Net Weight 120V~

60Hz 65 W Silver Approx. 10.0 kg Item Dimensions 310 x 300 x 716.5 mm Effective Coverage Noise Level Particle's Clean Air Delivery Rate CADR Particle TVOC's Clean Air Delivery Rate CADR TVOC 38~66m2 *

67 dB(A) 550m3/h 250m3/h Particle Purification Efficiency High Network Standby Power Consumption

< 2.0 W Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz Storage Temperature

-10 to 40 Storage Humidity 5%90%

*Calculated according to standard GB/T 18801-2015 Note: Air outlet was set to 90 during all performance testing For detailed e-manual, please go to https://www.smartmiglobal.com/pages/

manual For more information, please visit: https://www.smartmiglobal.com/

Need support? Please contact smartmi customer service: onlinesupport@

smartmiglobal.com 13 Conforms to UL Std. 507 FCC ID: 2AP98-JYKQJHQPR1 Contains FCC ID: 2ANDL-TYWE3SE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Limited by local law regulations, version for North America does not have region selection option. To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Advertencia 14 Si se ha daado el cable de corriente, deber reemplazarlo por un recambio especial del fabricante o su departamento de servicios. Este aparato puede ser utilizado por nios de 8 aos en adelante y por personas con capacidades sensoriales, mentales o fsicas reducidas siempre y cuando estn bajo la supervisin de un adulto, se les hayan proporcionado instrucciones sobre el uso del producto y se les haya advertido de los riesgos implcitos. Los nios no deben jugar con el aparato. La limpieza y el mantenimiento por parte del usuario no debe realizarse por nios sin supervisin de un adulto. Asegrese de que el purificador est apagado y desenchufado antes de realizar el mantenimiento. Precauciones Apague y desenchufe el purificador antes de moverlo. 15 El purificador no puede encenderse cuando la rejilla del ventilador y la tapa del compartimiento del filtro no estn correctamente instaladas. Mantenga una distancia de ms de 20 cm entre las entradas de aire y las paredes u otros objetos. Antes de la limpieza u otro mantenimiento, el aparato debe estar desconectado de la corriente elctrica. Elimine con frecuencia el polvo, el cabello y otras partculas de la malla exterior del filtro, para reducir la posibilidad de crecimiento bacteriano. Quite el polvo, el cabello y las partculas de las entradas de aire del purificador para evitar una reduccin del flujo de entrada de aire. Cubra la salida de aire para evitar que el polvo, el cabello y otras partculas se caigan cuando el purificador no se use durante mucho tiempo. Con el fin de evitar incendios, descargas elctricas u otros daos, use el cable de alimentacin y las tomas elctricas como se indica a continuacin:

No tire, retuerza ni doble excesivamente el cable de alimentacin, ya que podra exponer o romper el ncleo del cable. El cable de alimentacin debe estar enchufado a una toma de corriente adecuada. Use el cable de alimentacin que se suministr con el purificador, no use cables de alimentacin de terceros. Desenchufe siempre el purificador antes de realizar tareas de mantenimiento o mover el purificador de aire. Deje de usar el purificador inmediatamente cuando emita sonidos inusuales, malos olores, se sobrecaliente o su ventilador gire de forma irregular. No ponga los dedos u objetos extraos en las piezas de proteccin, piezas mviles, entradas o salidas de aire. Mantenga los objetos tales como pelos o telas alejados del purificador para evitar el bloqueo de las entradas o salidas de aire. No se siente, recueste ni se incline sobre el purificador. Ventile para evitar la intoxicacin por monxido de carbono cuando se use junto con aparatos de gas (como estufas de gas, calentadores de agua a gas). No vierta lquidos ni tire polvo u otras sustancias pequeas en la salida de aire del purificador. No use el purificador en las siguientes circunstancias, ya que pueden provocar descargas elctricas, incendios u otros daos:

Cerca de llamas encendidas, como velas, quemadores de incienso, estufas, chimeneas, cigarrillos, petardos, encendedores, antorchas multiuso, encendedores de velas o sartenes. Cerca de los aparatos que generen altas temperaturas, como calentadores elctricos, ventiladores calefactores, calentadores de pie elctricos, estufas elctricas o planchas elctricas. Asegrate de que no entren objetos inflamables en el purificador. En lugares inestables el purificador puede caerse fcilmente. En ambientes extremadamente calurosos, hmedos o mojados, como los baos. En caso de daos causados por fuerzas externas u otras razones, asegrese de que el producto est en buenas condiciones/reajustado (por ejemplo, la rejilla superior necesita ser reajustada despus de caerse) antes de usarlo; de lo contrario, pngase en contacto con el servicio post-venta o el distribuidor para su reemplazo. Descripcin General del Producto 16 Lea detenidamente este manual antes de usar el producto y consrvelo para futuras consultas. Rejilla de salida de aire Pantalla de visualizacin Sensor de gas Sensor lser de partculas Hebilla de apertura de la puerta Rejilla de entrada de aire Indicador de calidad del aire Interruptor de poder Frente Revs Puerta del compartimiento de filtro Conector de poder Indicador de calidad del aire Segn la concentracin de PM2,5, PM10 y TVOC, se muestra la calidad del aire integral. Verde Amarillo Naranja Rojo muy buena buena media insalubre Nota: Las ilustraciones del producto, los accesorios y la interfaz de usuario del manual de usuario son solo para fines de referencia. El producto y las funciones actuales pueden variar debido a mejoras del producto. Instalacin Asegrese de que haya quitado la bolsa de embalaje del filtro antes de encender el purificador!

17

>20cm

>20cm Colocacin Para ejercer mejor el rendimiento del purificador de aire, la entrada de aire del host debe mantener una cierta distancia con las paredes y otras obstrucciones durante el uso (consulte la imagen de arriba para obtener ms detalles). Atencin: Al utilizar el depurador, se recomienda cerrar las puertas y ventanas para obtener un mejor efecto de purificacin. Conexin con la fuente de alimentacin Conecte el cable de alimentacin al puerto de alimentacin en la parte inferior del host y luego conecte la fuente de alimentacin. Uso 18 Interfaz de encendido y apagado Interfaz de temperatura y humedad Despus de conectar la fuente de alimentacin, encienda el interruptor de poder en la parte inferior del revs de la mquina. Despus de conectar la fuente de alimentacin, la pantalla muestra la interfaz de encendido y apagado, el host entra en el estado de espera, toque el icono para encender la mquina. Atencin: Despus de que el host est en espera durante 1 minuto, la pantalla ingresar a la interfaz de temperatura y humedad, toque la pantalla para regresar a la interfaz de encendido y apagado. Uso 19 Atencin: la interfaz principal se puede cambiar deslizando hacia la izquierda y hacia la derecha Interfaz principal de PM10 Interfaz principal de PM2,5 Luces indicadoras POLLEN y TVOC Verde Amarillo Naranja Rojo muy buena buena media insalubre Modos de funcionamiento Automtico: ajusta automticamente la eficiencia de purificacin de acuerdo con la calidad del aire interior Sueo: funcionamiento con un ruido ultrabajo Favorite: Set and save the coverage area and the Favorito:

es el valor predeterminado mximo, el rea de uso se puede configurar a travs de la aplicacin, la eficiencia de purificacin se puede ajustar y la configuracin se puede guardar Valor de PM2.5 Muy bueno 1-20 g/m3 Bueno 21-35 g/m3 Medio 35-55 g/m3 Insalubre 55 g/m3 Luz indicadora de Wi-Fi Nota: PM10 se refiere a partculas gruesas que tienen un dimetro aerodinmico que vara de 2,5 a 10 m (PM10 PM2,5). Los ejemplos de partculas gruesas incluyen polvo, polen, esporas y cenizas volantes. Uso 20 Interfaz de los modos de funcionamiento Haga clic en el icono para cambiar entre los modos de funcionamiento: el automtico, el sueo y el favorito Pantalla del motor 1 3 2 4 Deslice hacia la izquierda y hacia la derecha Interfaz de configuracin Deslice hacia abajo para ingresar a la interfaz de encendido y apagado Deslice hacia la izquierda y hacia la derecha para cambiar las interfaces de configuracin y haga clic en la interfaz correspondiente para configurar. 1 ngulo de salida de aire Haga clic para cambiar entre los 3 ngulos de salida de aire 3 Reinicio de Wi-Fi Sirve para restablecer, deshabilitar / habilitar la configuracin de Wi-Fi. 2 4 Ajuste del brillo de la pantalla Haga clic para ajustar 4 niveles de brillo Vida til del filtro Muestra la vida restante del filtro Atencin: despus de que la pantalla est apagada, haga clic para activar la pantalla Uso Reinicio de Wi-Fi Reinicio de Wi-Fi En caso de no poder conectar el purificador de aire a la aplicacin: Deslice hacia la derecha en la pantalla principal para ingresar a la interface de configuracin de WiFi y seleccione Restaurar. Cuando el cono WiFi parpadea en la pantalla quiere decir que se ha restaurado con xito Encendido / apagado de Wi-Fi Deslice el dedo hacia la derecha en la pantalla principal para ingresar a la interfaz de configuracin de Wi-Fi, haga clic en "Desactivar" / "Activar" y luego haga clic en

"Aceptar" para desactivar o activar la funcin de Wi-Fi. Descripcin y reemplazo del filtro Descripcin del filtro Filtro Se reemplaza cada 6-12 meses 21 Aviso del estado del filtro Consejo de la instalacin del filtro El purificador no detecta el filtro o el filtro original no est instalado. Recordatorio de reemplazo del filtro Cuando la vida til del filtro es inferior al 10%, la pantalla recordar que se reemplace el filtro despus del arranque, y saltar a la interfaz de reemplazo del filtro despus de 5 segundos. Atencin: El filtro que contiene carbn activado puede tener un olor peculiar cuando el gas nocivo adsorbido alcanza el estado de saturacin. Se recomienda colocar el filtro en un lugar bien iluminado y ventilado durante un cierto perodo de tiempo para mejorar la actividad del carbn activado y restaurar de manera parcial su capacidad de adsorcin. Si el filtro alcanza la vida til recomendada, reemplcelo a tiempo. Cmo comprar el filtro Escanee el cdigo QR o visite la tienda oficial de smartmi https://www.smartmiglobal.com/filters/jya-fjordfilter-

pro para obtener ms informacin. Reemplazo del filtro 22 Advertencia: Apague el purificador y desconecte la fuente de alimentacin antes de reemplazar el filtro. 01 Abra la puerta del 02 Retire el filtro viejo compartimento del filtro Presione hacia abajo la hebilla de la puerta del compartimiento del filtro para abrir la puerta. Extraiga la manija del filtro y saque el filtro viejo. 03 Instale un nuevo filtro Retire la bolsa de embalaje del filtro.Instale el nuevo filtro en su lugar y cierre la puerta del compartimiento del filtro. Atencin:

Reemplace el filtro a tiempo de acuerdo con su vida til. Compre el filtro original aplicable de los canales oficiales. Vinculacin del dispositivo a Smartmi Link Control inteligente con Apple HomeKit 23 1 2 Abra la aplicacin Home en su iPhone / iPad. Toque "Agregar accesorio" y luego escanee el cdigo de configuracin de HomeKit en la etiqueta del producto (dos etiquetas en la unidad del dispositivo, vea la ilustracin), o ingrese el cdigo de configuracin de ocho dgitos sobre el Cdigo de configuracin de HomeKit. El dispositivo se vincular a la aplicacin Apple Home. El dispositivo se puede vincular a Smartmi Link despus de vincularlo a HomeKit. Vaya a la pgina de Informacin Personal en Smartmi Link. Toque "Informacin de HomeKit" y luego vincule el dispositivo HomeKit como se le solicite. Los dispositivos vinculados a Smartmi Link tambin se pueden agregar a HomeKit. Vaya a la pgina de Control de dispositivos en Smartmi Link. Toque "Agregar a HomeKit" en "Configuracin" y luego vincule el dispositivo a HomeKit como se le solicite. Nota:

Asegrese de que su red Wi-Fi est disponible y tenga acceso a Internet. Coloque su telfono lo ms cerca posible de este producto. (Este producto no es compatible con la red de 5G). Para controlar este accesorio que es compatible con HomeKit, se recomienda utilizar iOS 13.0 o una versin superior. Conserve el cdigo de configuracin de HomeKit, ya que deber escanear el cdigo para vincular el dispositivo a HomeKit despus de un restablecimiento de fbrica. iPad y iPhone son marcas comerciales de Apple Inc., registradas en EE. UU. y otros pases. Controlar este accesorio habilitado para HomeKit automticamente y fuera de casa requiere un HomePod, Apple TV o iPad configurado como un centro domstico. Se recomienda que actualice al software y al sistema operativo ms recientes. Este producto se ha vinculado a Smartmi Link y se puede controlar mediante la aplicacin. Escanee el cdigo QR o busque "Smartmi Link"

en la tienda de aplicaciones para descargar e instalar la aplicacin. Vaya a la pgina de inicio de la aplicacin, haga clic en "+" en el medio de la pgina, luego agregue el dispositivo cuando se le solicite. Nota:

Asegrese de que su red Wi-Fi est disponible y tenga acceso a Internet. Coloque su telfono lo ms cerca posible de este producto. Este producto no es compatible con la red de 5G Este producto aparecer como

"Purificador de Aire de Jya Fiordo Pro" en la lista de dispositivos de la

* Si necesita instrucciones ms detalladas, visite: https://

www.smartmiglobal.com/pages/helpcenter Cdigo de configuracin de HomeKit 24 Mantenimiento y cuidado Advertencia: Asegrese de que haya apagado el purificador y haya desconectado la fuente de alimentacin antes de realizar las siguientes operaciones!

Limpieza del compartimiento del filtro Para garantizar el efecto de ventilacin y purificacin, puede utilizar una aspiradora para quitar el polvo en la rejilla de entrada de aire y en las paredes del compartimiento, o lmpielo suavemente con un pao suave. Nota: No enjuague directamente con agua, roce o limpie el cuerpo de la mquina con un pao hmedo que gotee, para no daar la mquina. Limpieza del sensor de partculas lser Como se muestra en la figura, use una herramienta no afilada para abrir la puerta del compartimiento del sensor y use una pistola de aire o un soplador para limpiar el filtro de la puerta del compartimiento y el sensor. Nota: No utilice el aire caliente. Especificaciones 25 Nombre Modelo Tensin nominal Frecuencia nominal Potencia nominal Color Peso neto Purificador de Aire de Jya Fiordo Pro JYKQJHQPR1 120V~

60 Hz 65 W Plateado 10,0 kg aprox. Dimensiones del artculo 310 x 300 x 716.5 mm Alcance eficaz Nivel de ruido Tasa de entrega de aire limpio de la partcula partcula CADR 38~66m2 *

67 dB(A) 550m3/h Tasa de entrega de aire limpio de la TVOC TVOC CADR 250m3/h Eficiencia de Purificacin de Partculas Consumo de energa en espera de la red Alta

< 2.0 W Conexin inalmbrica Wi-Fi IEEE 802.11 b/g/n 2.4GHz

*Calculado en base a la norma GB/T 18801-2015 Advertencia: Los datos de rendimiento han sido comprobados como vlidos cuando la salida de aire est a 90 grados Para obtener un manual electrnico detallado, vaya a https://www. smartmiglobal.com/pages/manual Para obtener ms informacin, visite: https://www.smartmiglobal.com/

Necesita ayuda? Contacte el servicio al cliente de smartmi:onlinesupport@

smartmiglobal.com Conforms to UL Std. 507 ID FCC: 2AP98-JYKQJHQPR1 Contiene la ID FCC: 2ANDL-TYWE3SE Este dispositivo cumple con la parte 15 de las Normas FCC. El funcionamiento est sujeto a las dos condiciones siguientes:

(1) Este dispositivo no puede causar interferencias perjudiciales, y

(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluidas las interferencias que puedan causar un funcionamiento no deseado. Precaucin: Los cambios o modificaciones a esta unidad no aprobados expresamente por la parte responsable del cumplimiento podran anular la autoridad del usuario para operar el equipo. NOTA: Este equipo ha sido probado y cumple con los lmites para un dispositivo digital de Clase B, de acuerdo con la parte 15 de las Reglas de la FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra interferencias perjudiciales en una instalacin residencial. Este equipo genera, usa y puede irradiar energa de radiofrecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede causar interferencias adversas en las comunicaciones de radio. Sin embargo, no hay garanta de que no se produzcan interferencias en una instalacin particular. Si este equipo provoca interferencia adversa en la recepcin de radio o televisin, lo cual se puede determinar encendiendo y apagando el equipo, se recomienda que el usuario intente corregir la interferencia mediante una o ms de las siguientes medidas:

Reorientar o reubicar la antena receptora. Aumentar la distancia entre el equipo y el receptor. Conectar el equipo a una toma de corriente de un circuito diferente al que est conectado el receptor. Consultar al distribuidor o un tcnico de radio / TV para obtener ayuda. Debido a la restriccin de las regulaciones de la ley local, la versin para Norteamrica no tiene la opcin de seleccin de regin. Para satisfacer los requisitos de exposicin a RF de la FCC, se debe mantener una distancia de separacin de 20 cm o ms entre la antena de este dispositivo y las personas durante el funcionamiento del dispositivo. Para garantizar el cumplimiento, no se recomiendan las operaciones a una distancia menor que esta. Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd Address: Room 6111, 1st Floor, Building 6, No.18 Xueqing Road, Haidian District, Beijing, China For detailed e-manual, please go to https://www.smartmiglobal.com/pages/manual For further information, please go to https://www.smartmiglobal.com Fabricado por: Beijing Smartmi Electronic Technology Co., Ltd Direccin: Room 6111, 1st Floor, Building 6, No.18 Xueqing Road, Haidian District, Beijing, China Para obtener un manual electrnico detallado, vaya a https://www.smartmiglobal.com/pages/manual Para obtener ms informacin, visite https://www.smartmiglobal.com 220224

Jya Product name: Jya Fjord Pro Air Purifier Model: JYKQJHQPR1 Rated Voltage : 120V ~

Rated Frequency : 60Hz Rated Power: 65 W Manufacturer: Beijing Smartmi Electronic Technology Co., Ltd Address : Room 6111, Ist Floor, Building 6, No.18 Xueqing Road, Haidian District, Beijing, China EPA Est. No. 101397-CHN-1 Contains FCC ID : 2ANDL-TYWE3SE FCC ID: 2AP98-JYKQJHGPRI Conforms to UL Std. 507 This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any Interference received, including interference that may cause undesired operation.

TCB Authority to Act as Agent Number: MS-0045317 Revision:

Effective date: Oct 8, 2021 0 Authority to Act as Agent Date: 10/03/2022 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCCs regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Beijing Smartmi Electronic Technology Co., Ltd. /Room 6111, 1st Floor, Building 6, No.18 Xueqing Road, Haidian District, Beijing, China. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

09/02/2023 Title

Certification Manager Telephone

+86-13810086951 By

(Signature) On behalf of

Beijing Smartmi Electronic Technology Co., Ltd.

(Company Name) Feipeng LIN

(Print Name) QF094234 Page 1 of 1 Revision 0

Beijing Smartmi Electronic Technology Co., Ltd. Confidentiality Letter Date: 2022-03-10 Subject: Confidentiality Request forFCC ID: 2AP98-JYKQJHQPR1;

Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Beijing Smartmi Electronic Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. We also request the permanent confidentiality for internal photo, and the circuit board or internal components is enclosed specially, not accessible to public. It is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

Certification Manager

(Signature/Title) Feipeng LIN

(Print name)