all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.03 MiB | November 01 2016 | |||
1 | Cover Letter(s) | November 01 2016 | ||||||
1 | Cover Letter(s) | November 01 2016 | ||||||
1 | External Photos | November 01 2016 | ||||||
1 | Cover Letter(s) | November 01 2016 | ||||||
1 | Internal Photos | November 01 2016 | ||||||
1 | Cover Letter(s) | November 01 2016 | ||||||
1 | ID Label/Location Info | November 01 2016 | ||||||
1 | RF Exposure Info | November 01 2016 | ||||||
1 | Cover Letter(s) | November 01 2016 | ||||||
1 | Test Report | November 01 2016 | ||||||
1 | Test Setup Photos | November 01 2016 |
1 | User manual | Users Manual | 1.03 MiB | November 01 2016 |
Beijing Winner Microelectronics Co., Ltd. AT Command User Manual V1.0.0 Beijing Winner Microelectronics Co., Ltd. Addr: 7th floor, Zhixing Building, No.3 Shangyuancun, Haidian District, Beijing, P.R.China Tel: +86-10-62161900 Company Website: www.winnermicro.com Beijing Winner Microelectronics Co., Ltd. Version Completion Date Revision Record Author Review Approval Document history V1.0.0 2015-10-12 Draft Zhang Pengfei Beijing Winner Microelectronics Co., Ltd. Content 1 Introduction ....................................................................................................................................................... 2 1.1 1.2 Overview ...................................................................................................................................... 2 Control command protocol ........................................................................................................... 2 1.2.1 Command code ..................................................................................................................... 2 1.2.2 Error code ............................................................................................................................. 5 2 AT Command Protocol ................................................................................................................................. 5 2.1 Syntax introduction ...................................................................................................................... 5 2.1.1 Syntax format ....................................................................................................................... 6 2.2 Command set ................................................................................................................................ 9 2.2.1 System control type .............................................................................................................. 9 2.2.2 Parameter setting type ........................................................................................................ 13 2.2.3 Network control class ......................................................................................................... 28 2.2.4 System debug type .............................................................................................................. 39 3 Common operation ..................................................................................................................................... 43 3.1 3.2 3.3 3.4 3.5 3.6 Create AP process ....................................................................................................................... 43 Scan AP process ......................................................................................................................... 44 STA joins AP process ................................................................................................................. 44 How to disconnect AP by STA ................................................................................................... 45 How to view the current status by STA ...................................................................................... 45 How to use socket function ........................................................................................................ 45 Beijing Winner Microelectronics Co., Ltd. 1 Introduction 1.1 Overview This manual describes the AT+ command communication protocol of Winner Micros Embedded Wi-Fi chip. AT + command protocol is a command format based on ASCII command style, communication via the UART interface with Wi-Fi chip. 1.2 Control command protocol 1.2.1 Command code The content of this part is the user command, which shall be open to end users of the products for achieving product parameter configuration, networking transmission and other functions, the command list is as follows:
Command Name Use 1.
(null) 2. ATLT 3. ATM 4. ATPT 5. ATRM Null Set/query the automatic framing data length Set/query operating mode of the module Set/query the automatic framing period Set/query socket connection message automatically created by the module in automatic operating mode 6. BSSID Set/query BSSID address of target AP 7. BRDSSID Enable and disable AP SSID broadcast 8. CHL 9. CHLL Set/query target wireless channel number Set/query wireless channel list 10. CMDM Set/query the system's default command mode 11. DNS 12. E 13. ENCRY 14. ENTM Set NIC domain Switch serial characters echo Set/query encryption mode of wireless network Set the module into the serial transparent transmission mode Beijing Winner Microelectronics Co., Ltd. 15. ENTS 16. ESPC 17. ESPT 18. IOM 19. KEY Enter the sleeping mode Set/query escape character used to exit the transparent transmission mode Set/query escape time used to exit the transparent transmission mode Set/query GPIO mode Set/query key of the wireless network 20. LKSTT Query the network connection status 21. LKSTT2 Query the network connection status2, apsta mode is valid 22. NIP 23. PASS 24. PMTF Set/query local IP address Set/query system password Update all the parameters in memory to Flash 25. QMAC Query the physical address 26. QMAC2 Query the physical address2, apsta mode is valid 27. QVER 28. RSTF Query version information Factory Default Setting 29. SKCLS Close socket connection 30. SKCT Create socket connection 31. SKRCV 32. SKSDF 33. SKSND 34. SKSTT 35. SSID 36. SSID2 37. UART 38. WARC Receive data through socket connection Set default sending socket connection Send data through socket connection Query socket connection status Set/query SSID Set/query SSID2, apsta mode is valid Set/query serial data format Set/query automatic retry times in the automatic operating mode 39. WARM Set/query wireless roaming 40. WATC 41. WBGR 42. WEBS Set/query automatically create Ad hoc network Set/query wireless BG mode and the maximum transmission rate Set/query Web server Beijing Winner Microelectronics Co., Ltd. 43. WJOIN Join/create a wireless network 44. WLEAV Disconnect the wireless network 45. WPRT 46. WPSM Set/query wireless network mode Turn on/off power saving mode 47. WSCAN Scan the network 48. Z Reset 49. SKSRCIP Query socket data source IP address 50. SKRPTM Turn on/off socket initiative sending and receiving data function 51. ONESHOT Turn on/off one-shot configuration function 52. HTTPC http post get data function 53. SKGHBN Get the server IP. 54. WREG Set/query wireless channel national region 55. AOLM Set/query the always-online mode of the module (Note, this mode is only valid when the module is in automatic operation mode and the network type is STA). 56. PORTM Set the module interface Function:0 serial; 1 high-speed serial; 2 SPI interface 57. UPNP Set upnp (close/enable);
58. WWPS Set/query WPS function 59. CUSTDATA Receiving user data via one-shot configuration tool 60. CNTPARAM Query network configuration parameters 61. SLIST Query the sta information already connected. Valid only in ap, apsta mode The content of this section is reserved as a system command only for manufacturers to implement products maintenance and test function, the command list is as follows:
AT+ commnad Function
&DBG
®R Set the system debugging mode Read register or internal RAM space Beijing Winner Microelectronics Co., Ltd.
®W Modify register or internal RAM space
&RFR
&RFW
&FLSR
&FLSW
&UPDM
&UPDD
&UPDP 1.2.2 Error code Read RF register space Modify RF register space Read SPI Flash address space Modify SPI Flash address space Set the user interface (UART/SPI) firmware upgrade mode Send firmware upgrade data Setting factory parameters The error code supported by this system is defined as follows, which applies to response message in AT + command protocol:
ASCII Meaning
-
-1
-2
-3
-4
-5
-6
-7
-10
-11
-12
-13 Success Invalid command format Command is not supported Invalid operation symbol Invalid parameter Operation not permitted Lack of Memory FLASH Error Failed to Join the Network No Available Socket Invalid Socket Socket Connection Failed
-100 Undefined Error 2 AT Command Protocol 2.1 Syntax introduction This module uses AT + command protocol as the user control protocol. AT + command protocol is a command format based on ASCII command style. Its syntax format and management process is described as follows. Beijing Winner Microelectronics Co., Ltd. 2.1.1 Syntax format Format description
<>: Indicates the part must be included
[]: Indicates the optional part Command message AT+<CMD>[op][para1],[para2],[para3],[para4]<CR>
AT+: Command message prefix CMD: Command string
[op] : Command operator, when the command requires parameter, it can specify the operation type of parameters, including,
=, Parameter/returned value prefix characters
=!, Synchronize the modified parameter to flash in the command of parameter setting type
=?, Query the current setting in the command of parameter setting type
<CR> : Enter. It is 0x0d in ASCII Response message
+<RSP>[op][para1],[para2],[para3],[para4]<CR><LF><CR><LF>
+: Response message prefix RSP: Response string OK Success ERR Failure
<CR>: Enter. It is 0x0d in ascii
<LF>: Newline. It is 0x0a in ascii Data type String: String, enclosed by double quotation marks, but the content does not include the quotation marks, such as this is a string. Dec: Number in decimalist, such as 10 Hex: Number in hexadecimal, such as a Ip: IP address string, such as 192.168.0.1 MAC: Formed with 12 hexadecimal numbers, such as 001EE3A80102 Beijing Winner Microelectronics Co., Ltd. 2.1.1.1 Process flow AT+ command protocol uses the form of command+ response. The vast majority of commands need the response messages returned by the receiver after the completion of process. If the previous command is processing and a new command is received again, it will be silently discarded without returning any news, as shown below. For certain special commands, such as AT + SKSND, AT + SKRCV, binary data shall be transmitted after the command or response, at this time, the data receiver temporarily turns into the transparent transmission mode and starts to receive the binary data flow until it receives the data length specified by the <size> field of command or message or waits for timeout, and then it automatically exits transparent transmission status, the process is shown as follows. Beijing Winner Microelectronics Co., Ltd. 2.1.1.2 Format examples Example 1: Responsing successful message AT+
+OK Example 2: Responsing failure message AT+WJOIN
+ERR=-10 Example 3: Using input parameter AT+UART=9600,1,1,0
+OK Example 4: Using parameter sync to Flash operator <!>
AT+ATPT=!500
+OK Example 5: Using query operator <?>
AT+ATPT=?
+OK=500 2.1.1.3 Error code Meaning Invalid command format Command is not supported Invalid operation symbol Value
-1
-2
-3 Beijing Winner Microelectronics Co., Ltd.
-4
-5
-6
-7
-10
-11
-12
-13 Invalid parameter Operation not permitted Lack of Memory FLASH Error Failed to Join the Network No Available Socket Invalid Socket Socket Connection Failed
-100 Undefined Error 2.2 Command set 2.2.1 System control type 2.2.1.1 AT+
Function:
Null command, to detect whether there is a normal response of the program. Format (ASCII):
AT+<CR>
+OK<CR><LF><CR><LF>
Parameter:
None 2.2.1.2 AT+Z Function:
Reset system. Format (ASCII):
AT+Z<CR>
+OK<CR><LF><CR><LF>
Parameter:
None Beijing Winner Microelectronics Co., Ltd. 2.2.1.3 AT+E Function:
Switch serial command echo. Format (ASCII):
AT+E<CR>
+OK<CR><LF><CR><LF>
Parameter:
None 2.2.1.4 AT+ENTS Function:
The system enters in sleeping mode. The system will be automatically awaked after receiving any at+ in sleeping state. Format (ASCII):
AT+ENTS=[ps_type],[wake_type],[delay_time],[wake_time]<CR>
+OK<CR><LF><CR><LF>
Parameter:
ps_type: power saving type Value 0 1 wake_type: awake type Value 0 1 Sleep Standby gpio Timer0 Meaning Meaning delay_time: delay time, only valid when timer0 wake, unit ms, 100 10000ms wake_time: wake time, only valid when timer0 wake, unit ms, 1000 65535ms Beijing Winner Microelectronics Co., Ltd. 2.2.1.5 AT+ENTM Function:
Serial enters in the transparent transmission mode. In the transparent transmission mode, the system will exit this mode while receiving escape character in line with the trigger conditions. Note: before entering the transparent transmission mode, 1ensure networking, 2create a socket, 3set the default connection of the transparent transmission is the current created socket. Format (ASCII):
AT+ENTM<CR>
+OK<CR><LF><CR><LF>
Parameter:
None 2.2.1.6 AT+RSTF Function:
Return to the factory setting in FLASH. The system needs to restart and then the setting will become effective. Format (ASCII):
AT+RSTF<CR>
+OK<CR><LF><CR><LF>
Parameter:
None 2.2.1.7 AT+PMTF Function:
All the parameters stored in memory shall be updated to FLASH to ensure that USER defined parameter wont disappear after power down. Format (ASCII):
Beijing Winner Microelectronics Co., Ltd. AT+PMTF<CR>
+OK<CR><LF><CR><LF>
Parameter:
None 2.2.1.8 AT+QMAC Function:
Acquire the physical address of the module. Format (ASCII):
AT+QMAC<CR>
+OK=<mac address><CR><LF><CR><LF>
Parameter:
mac address: The length is 12 hexadecimal numbers, the format is 001EE3A34455 2.2.1.9 AT+QMAC2 Function:
Acquire the soft ap physical address of the module created in apsta mode. Format (ASCII):
AT+QMAC2<CR>
+OK=<mac address><CR><LF><CR><LF>
Parameter:
mac address: The length is 12 hexadecimal numbers, the format is 001EE3A34455 2.2.1.10 AT+QVER Function:
Acquire the system version information, including hardware version and firmware version. Format (ASCII):
AT+QVER<CR>
+OK=<hard,firm,time,date><CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd. Parameter:
hard: hardware version information, string format, such as H1.00.00.1029 firm: firmware version information, string format, such as F0.02.02@ 18:25:25 Jul 28 2010 time: time of firmware creation date: date of firmware creation 2.2.2 Parameter setting type 2.2.2.1 AT+NIP Function:
When the module is STA, this command is used to set/query the local ip address. It should be noted that when the address type is set to DHCP, the actual dynamic IP address information of the module cant be queried by using this command. AT+LKSTT command can be used to query. When the module as AP, this command is used to set/query the local ip address, enable and disable DHCP Server. It means that the meaning of the command type field in AP mode is different from that in STA mode. IP address of the module may be queried by using this command in enable DHCP Server. Format (ASCII):
AT+NIP=[!?][type],[ip],[netmask],[gateway],[dns]<CR>
+OK[=type,ip,netmask,gateway,dns]<CR><LF><CR><LF>
Parameter:
type: address type Value 0 1 Meaning Use DHCP to dynamically allocate/enable DHCP Server Use a static IP address/disable DHCP Server ip: ip address, data format is 192.168.1.22, without the quotation marks netmask: subnet mask, data format is in line with ip address gateway: gateway address, data format is in line with ip address dns: DNS address, data format is in line with ip address Beijing Winner Microelectronics Co., Ltd. 2.2.2.2 AT+DNS Function:
Set/query NIC module domain name, the setting is effective only when the module is AP. Format (ASCII):
AT+DNS=[!?][dnsname]<CR>
+OK[=dnsname]<CR><LF><CR><LF>
Parameter:
dns name: NIC module domain name, 1~31 characters and surrounded by double quotation marks. 2.2.2.3 AT+ATM Function:
Set/query the operating mode of the module. Format (ASCII):
AT+ATM=[!?][mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
Parameter:
mode: operating mode Value 0 1 Meaning Automatic mode Command mode 2.2.2.4 AT+ATRM Function:
Set/query the socket connection information automatically created by the module in automatic operating mode. Format (ASCII):
AT+ATRM=[!?][protocol],[cs],[host/timeout],[port]<CR>
+OK[=protocol,cs, host/timeout,port]<CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd. Parameter:
protocol: protocol type, cs: C/S mode, Value 0 1 Value 0 1 TCP UDP Client Server Meaning Meaning host_timeout: According to the protocol and cs, the meanings are respectively as follows. cs protocol Meaning The target server name, input domain name or ip 0 X address, such as 192.168.1.100 or www.sina.com.cn TCP connection timeout period, the client connecting to this server will be automatically kicked off if it does not send any data in this period. The effective value range is1~10000000, unit: second, 0 means never, the default setting is 1 0 120 seconds 1 1 No meanings port: port number 2.2.2.5 AT+SSID Function:
Set/query the wireless network name, thats ssid. Format (ASCII):
AT+SSID=[!?][ssid]<CR>
+OK[=ssid]<CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd. Parameter:
ssid: the wireless network name, 1~32 characters and surrounded by double quotation marks. 2.2.2.6 AT+SSID2 Function:
Set/query the soft ap name of the module created in apsta mode, thats ssid. Format (ASCII):
AT+SSID2=[!?][ssid]<CR>
+OK[=ssid]<CR><LF><CR><LF>
Parameter:
ssid: the wireless network name, 1~32 characters and surrounded by double quotation marks. 2.2.2.7 AT+ENCRY Function:
Set/query wireless network encryption mode. It should be specially noted that other encryption modes except OPEN mode need to set correct network key cooperating with AT+KEY command. In addition, the module only supports setting OPEN, WEP64 and WEP128 in AP or AD-HOC mode. Format (ASCII):
AT+ENCRY=[!?][encry mode]<CR>
+OK[=encry mode]<CR><LF><CR><LF>
Parameter:
encry mode: encryption mode Value Meaning 0 1 2 OPEN WEP64 WEP128 Beijing Winner Microelectronics Co., Ltd. 3 4 5 6 WPA-PSK(TKIP) WPA-PSK(CCMP/AES) WPA2-PSK(TKIP) WPA2-PSK(CCMP/AES) 2.2.2.8 AT+KEY Function:
Set/query the network key. It should be noted that before using this command to set network key, the encryption mode must be firstly set by the command AT+ENCRY. Format (ASCII):
AT+KEY=[!?][format],[index],[key]<CR>
+OK[=format,index,key]<CR><LF><CR><LF>
Parameter:
format: key format Value 0 1 HEX ASCII Meaning index: The key index number, 1~4 is used in WEP encryption key, and its set 0 in other encryption mode. key: Key string, its embedded in double quotation marks. According to the different encryption modes, key size and key format are defined as follows, Key format Encryption mode WEP64 WEP128 HEX ASCII 10 hexadecimal characters (Note 1) 5 ASCII characters (Note 2) 26 hexadecimal characters 13 ASCII characters WPA-PSK(TKIP) 64 hexadecimal characters 8 ~ 63 ASCII characters WPA-PSK(CCMP/AES) 64 hexadecimal characters 8 ~ 63 ASCII characters WPA2-PSK(TKIP) 64 hexadecimal characters 8 ~ 63 ASCII characters WPA2-PSK(CCMP/AES) 64 hexadecimal characters 8 ~ 63 ASCII characters Beijing Winner Microelectronics Co., Ltd. Note 1: 16 hexadecimal characters represents 0 ~ 9, a ~ f (case insensitive), such as 11223344dd Note 2: ASCII character refers to numbers 0~9 and characters a ~ z (case-sensitive) in the standard ASCII character set specified by the International Organization for Standardization (ISO), such as 14u6E 2.2.2.9 AT+BSSID Function:
Set/query specified bssid address of the target AP. This setting is effective only in the infra network when the module is STA. Format (ASCII):
AT+BSSID=[!?][mode],[bssid]<CR>
+OK[=mode,bssid]<CR><LF><CR><LF>
Parameter:
mode: BSSID mode Value 0 1 Automatic Specified Meaning bssid: network BSSID, the length is 12 hexadecimal numbers, the format is 001EE3A34455 2.2.2.10 AT+CHL Function:
Set/query the specified wireless channel mode. Format (ASCII):
AT+CHL=[!?][mode],[channel]<CR>
+OK[=mode,channel]<CR><LF><CR><LF>
Parameter:
mode: channel mode Value 0 1 Automatic Specified Meaning Beijing Winner Microelectronics Co., Ltd. channel: wireless channel number, the effective range is 1 ~ 14. 2.2.2.11 AT+CHLL Function:
Set/query wireless channel list. The parameter in wireless channel list is used to specify working channel range of the module, channels not included in the list will not be scanned. Reasonably using this parameter may speed up the module scanning and networking speed. Format (ASCII):
AT+CHLL=[!?][channel list]<CR>
+OK[=channel list]<CR><LF><CR><LF>
Parameter:
channel list: wireless channel list, in hexadecimal format, beginning from the lowest bit, each bit represents a channel, the default setting is 3fff, that represents all the 1~14 channels 2.2.2.12 AT+WPRT Function:
Set/query wireless network mode. Format (ASCII):
AT+WPRT=[!?][type]<CR>
+OK[=type]<CR><LF><CR><LF>
Parameter:
type: network mode Value Meaning 0 1 2 3 infra network (the module as STA) adhoc network infra network (the module as AP) infra network (the module as APSTA) 2.2.2.13 AT+WATC Function:
Beijing Winner Microelectronics Co., Ltd. Set/query whether to automatically create the enabled adhoc network. This setting is effective only when the wireless network type is set to adhoc, which means whether to create an adhoc network with the same SSID when networking is failed. Format (ASCII):
AT+WATC= [!?][enable]<CR>
+OK[=enable]<CR><LF><CR><LF>
Parameter:
enable: The symbol of enabling Value 0 1 Disabled Enabled Meaning 2.2.2.14 AT+WPSM Function:
Turn on/off automatic power saving mode. Format (ASCII):
AT+WPSM=[!?][enable]<CR>
+OK[=enable]<CR><LF><CR><LF>
Parameter:
enable: The symbol of enabling Value 0 1 Disabled Enabled Meaning 2.2.2.15 AT+WARM Function:
Set/query whether to enable wireless roaming function, the setting is effective only in the infra network when the module as STA. Format (ASCII):
AT+WARM=[!?][enable]<CR>
+OK[=enable]<CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd. Parameter:
enable: The symbol of enabling Value 0 1 Disabled Enabled Meaning 2.2.2.16 AT+WARC Function:
Set/query the function of automatic retry after the wireless network is disconnected or networking is failed. This parameter is only effective in the infra network that the module as STA and the module is in the automatic operating mode. Format (ASCII):
AT+WARC=[!?][count]<CR>
+OK[=count]<CR><LF><CR><LF>
Parameter:
count: Times of Retry Value Meaning 0 No retry 1~254 Times of retry 255 Retry forever 2.2.2.17 AT+WBGR Function:
Set/query BG mode of the wireless network and the maximum sending rate. Format (ASCII):
AT+WBGR= [!?][bg_mode],[max_rate]<CR>
+OK[=bg_mode,max_rate]<CR><LF><CR><LF>
Parameter:
bg mode: BG mode Value Meaning 0 B/G mixed Beijing Winner Microelectronics Co., Ltd. 1 B max rate: The maximum sending rate, in B mode, only 0-3 is effective. Value Meaning 0 1 2 3 4 5 6 7 8 9 10 11 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps 6 Mbps 9 Mbps 12 Mbps 18 Mbps 24 Mbps 36 Mbps 48 Mbps 54 Mbps 2.2.2.18 AT+BRDSSID Function:
Enable/disable AP SSID broadcast, and this setting is only valid when the module is as AP. Format (ASCII):
AT+BRDSSID=[!?][enable]<CR>
+OK[=enable]<CR><LF><CR><LF>
Parameter:
enable: Whether to enable SSID broadcast Value 0 1 Meaning Disable AP SSID broadcast Enable AP SSID broadcast 2.2.2.19 AT+UART Function:
Beijing Winner Microelectronics Co., Ltd. Set/query data format of uart interface. Format (ASCII):
AT+UART=[!?][baudrate],[databit],[stopbit],[parity],[flowcontrol]<CR>
+OK[=baudrate,databit,stopbit,parity]<CR><LF><CR><LF>
Parameter:
baud rate: baud rate, the valid range is from 1200115200 Value Meaning 115200 115200 bps 57600 57600 bps 38400 38400 bps 19200 19200 bps 9600 4800 2400 1200 9600 bps 4800 bps 2400 bps 1200 bps data bit: data bits Value 0 1 8 bits 7 bits Meaning stop bit: stop bits Value Meaning parity: parity 0 1 2 Value 0 1 1 bit Not support 2 bits No parity Odd parity Meaning Beijing Winner Microelectronics Co., Ltd. 2 Even parity 2.2.2.20 AT+ATPT Function:
Set/query the automatic framing period of the data. This parameter is only effective in serial transparent transmission mode. Format (ASCII):
AT+ATPT=[!?][period]<CR>
+OK[=period]<CR><LF><CR><LF>
Parameter:
period: automatic framing period, 50~10000ms, the unit is millisecond, the minimum step size is 50ms 2.2.2.21 AT+ATLT Function:
Set/query the automatic framing length of the data. This parameter is only effective in serial transparent transmission mode. Format (ASCII):
AT+ATLT=[!?][length]<CR>
+OK[=length]<CR><LF><CR><LF>
Parameter:
length: automatic framing length, 32~1024 bytes 2.2.2.22 AT+ESPC Function:
Set/query the escape characters. This parameter is used for serial to exit the transparent transmission mode. Format (ASCII):
Beijing Winner Microelectronics Co., Ltd. AT+ESPC=[!?][escape]<CR>
+OK[=escape]<CR><LF><CR><LF>
Parameter:
escape: escape characters, the format is 2 hexadecimal numbers representing ASCII characters, for example, ASCII characters + should be expressed as 2B. 2.2.2.23 AT+ESPT Function:
Set/query the escape time. This parameter is used for serial to exit the transparent transmission mode. Format (ASCII):
AT+ESPT=[!?][time]<CR>
+OK[=time]<CR><LF><CR><LF>
Parameter:
time: escape time, 100~10000ms, the unit is millisecond, the minimum step size is 100ms 2.2.2.24 AT+WEBS Function:
Set/query whether to enable WEB management server. Format (ASCII):
AT+WEBS=[!?][enable],[port]<CR>
+OK[=enable,port]<CR><LF><CR><LF>
Parameter:
enable: The symbol of enabling Value 0 1 Disabled Enabled Meaning port: server port number, the default setting is 80. Beijing Winner Microelectronics Co., Ltd. 2.2.2.25 AT+PASS Function:
Set/query system login password. Format (ASCII):
AT+PASS=[!?][password]<CR>
+OK[=password]<CR><LF><CR><LF>
Parameter:
pass: 6 ASCII characters 2.2.2.26 AT+IOM Function:
Set/query GPIO1 operating mode. Format (ASCII):
AT+IOM=[!?][mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
Parameter:
mode: Operating mode Value Meaning 0 1 2 System Function Input Output 2.2.2.27 AT+CMDM Function:
Set/query the default command mode of the system. Format (ASCII):
AT+CMDM=[!?][mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
Parameter:
Beijing Winner Microelectronics Co., Ltd. mode: Command mode Meaning AT + command Compatible protocol Value 0 1 2.2.2.28 AT+CUSTDATA Function:
Receiving user data via one-shot configuration tool. The first to send AT + ONE SHOT = 1 command before using, the module is configured to one-shot mode. Format (ASCII):
AT+CUSTDATA[=?]<CR>
+OK=data<CR><LF><CR><LF>
Parameter:
None 2.2.2.29 AT+CNTPARAM Function:
Query network configuration parameters. Format (ASCII):
AT+CNTPARAM[=?]<CR>
+OK=<bssid_en>,[bssid],[ssid],<key><CR><LF><CR><LF>
Parameter:
returnbssid_en Value 0 1 Meaning Disable BSSID connecting Enable BSSID connecting Enable BSSID,return 1 , bssid, key Beijing Winner Microelectronics Co., Ltd. Disable BSSID,return 0, ssid, key 2.2.3 Network control class 2.2.3.1 AT+UPNP Function:
Set/query upnp function. Format (ASCII):
AT+UPNP=[!?][enable] <CR>
+OK[=enable]<CR><LF><CR><LF>
Parameter:
enable: whether to enable upnp function Value 0 1 Disabled Enabled Meaning Description: UPnP is a P2P connection structure around the world achieved by various smart devices, wireless devices and personal computers. 2.2.3.2 AT+PORTM Function:
Set/query the module interface mode. Format (ASCII):
AT+PORTM=[!?][mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
Parameter:
mode: interface mode Value 0 1 Meaning Low-speed UART High-speed UART Beijing Winner Microelectronics Co., Ltd. 2 H-SPI 2.2.3.3 AT+ AOLM Function:
Set/query the always-online mode of the module (Note, this mode is only valid when the module is in automatic operation mode and the network type is STA). Format (ASCII):
AT+AOLM=[!?][enable],[ssid],[encry],[key]<CR>
+OK[=enable],[ssid],[encry],[key]<CR><LF><CR><LF>
Parameter:
enable: whether to enable always-online mode ssid: wireless network name, 1~32 characters encry: encryption mode Value 0 1 Meaning Open Encryption (WPA2-PSK, CCMP/AES) key: key, the length is fixed at 8 ASCII characters 2.2.3.4 AT+ SKGHBN Function:
Get IP of the extranet domain name. Format (ASCII):
AT+ SKGHBN =[!?][ URL] <CR>
+OK[=IP]<CR><LF><CR><LF>
Parameter:
URL: extranet domain name IP: ip address. 2.2.3.5 AT+WWPS Function:
Beijing Winner Microelectronics Co., Ltd. Set/query WPS function Format (ASCII):
AT+WWPS=[!?][mode],[pin]<CR>
+OK[=mode],[pin]<CR><LF><CR><LF>
Parameter:
mode: WPS function selection Value 0 1 Button method PIN method Meaning pin_len: the length of PIN code (only for HEX format command) pin: wireless router PIN code, hexadecimal format 2.2.3.6 AT+WREG Function:
Set/query wireless channel national region. Format (ASCII):
AT+WREG=[!?][region] <CR>
+OK[=region]<CR><LF><CR><LF>
Parameter:
region: national region code 2.2.3.7 AT+WJOIN Function:
This command is only valid when the module as STA is used to join/create a wireless network. If the current network mode is adhoc, and no specified SSID network can be detected, the module will automatically create a new network. If it is already networking, then the network connection information will be directly returned. Format (ASCII):
AT+WJOIN<CR>
Beijing Winner Microelectronics Co., Ltd.
+OK=<bssid>,<type>,<channel>,<encry>,<ssid>,<rssi><CR><LF><CR><LF>
Parameter:
bssid: Network BSSID with the length of 12 hexadecimal numbers in the format of 001EE3A34455 type: network mode Value Meaning 0 1 2 Infra network(STA) Adhoc network infra network (AP) channel: channel number encry: encryption mode Value 0 1 Open Encryption Meaning ssid: wireless network name, 1~32 characters, surrounded by double quotation marks rssi: network signal strength, none minus, its unit is Db, i.e., 50 indicates that the strength is
-50Db. 2.2.3.8 AT+WLEAV Function:
This command is only valid when the module is STA, and it can be used to disconnect the current wireless network. Format (ASCII):
AT+WLEAV<CR>
+OK<CR><LF><CR><LF>
Parameter:
None Beijing Winner Microelectronics Co., Ltd. 2.2.3.9 AT+WSCAN Function:
This command is only valid when the module is STA, and it can be used to scan wireless network and return after the completion. Format (ASCII):
AT+WSCAN<CR>
+OK=<bssid>,<type>,<channel>,<encry>,<ssid>,<rssi><CR><LF>
<bssid>,<type>,<channel>,<encry>,<ssid>,<rssi><CR><LF>
<CR><LF>
Parameter:
The same with AT+WJOIN 2.2.3.10 AT+LKSTT Function:
Query the network connection status. Format (ASCII):
AT+LKSTT<CR>
+OK[=status,ip,netmask,gateway,dns1,dns2]<CR><LF><CR><LF>
Parameter:
status: connection status Value 0 1 Disconnect Connect Meaning ip: ip address, data format is 192.168.1.22, without the quotation marks netmask: subnet mask, data format is in line with ip address gateway: gateway address, data format is in line with ip address dns1: DNS address, data format is in line with ip address dns2: DNS address, data format is in line with ip address Beijing Winner Microelectronics Co., Ltd. 2.2.3.11 AT+LKSTT2 Function:
Query the soft ap network connection status of the module created in apsta mode. Format (ASCII):
AT+LKSTT2<CR>
+OK[=status,ip,netmask,gateway,dns1,dns2]<CR><LF><CR><LF>
Parameter:
status: connection status Value 0 1 Disconnect Connect Meaning ip: ip address, data format is 192.168.1.22, without the quotation marks netmask: subnet mask, data format is in line with ip address gateway: gateway address, data format is in line with ip address dns1: DNS address, data format is in line with ip address dns2: DNS address, data format is in line with ip address 2.2.3.12 AT+SLIST Function:
Query the sta information already connected. Valid only in ap, apsta mode. Format (ASCII):
AT+SLIST<CR>
+OK[=sta_number,sta_mac1,sta_ip1,sta_mac2,sta_ip2]<CR><LF><CR><LF>
Parameter:
sta_number: the number of station already connected. sta_mac: station mac address already connected sta_ip: station ip address already connected Beijing Winner Microelectronics Co., Ltd. 2.2.3.13 AT+SKCT Function:
Create the socket. In client mode, waiting for connection completion (success or failure) and then return; in server mode, directly return after the completion of creation. Format (ASCII):
AT+SKCT=[protocol],[cs],[host_timeout],<remote_port>,<local_port><CR>
+OK=<socket><CR><LF><CR><LF>
Parameter:
protocol: protocol type, Value 0 1 csC/S mode, Value 0 1 TCP UDP Client Server Meaning Meaning host_timeout: According to the protocol and cs, the meanings are respectively as follows. cs protocol Meaning The target server name, input domain name or ip 0 X address, such as 192.168.1.100 or www.sina.com.cn TCP connection timeout period, the client connecting to this server will be automatically kicked off if it does not send any data in this period. The effective value range is1~10000000, unit: second, 0 means never, the default setting is 1 0 120 seconds 1 1 No meanings remote_port: remote port number Beijing Winner Microelectronics Co., Ltd. local_port: local port number socket: socket number 2.2.3.14 AT+SKSND Function:
Send data by the specified socket and return after the completion. This command sends binary data. Users should begin to send original data after receiving the response (+OK) of module. The module will automatically exit transmission process after receiving the specified data length and send data to the network, the redundant date will be rejected. Otherwise, the module will be forced to constrainedly exit transmission mode and send the received data to the network when the module has been waiting for timeout period (1 second). Format (ASCII):
AT+SKSND=<socket>,<size><CR>
+OK=<actualsize><CR><LF><CR><LF>
[data steam]
Parameter:
socket: socket number size: the prepared sending data length, the number of bytes actualsize: the allowed sending data length, the number of bytes data steam: original data 2.2.3.15 AT+SKRCV Function:
Read data form receive buffer of the target socket, and return after the completion. After receiving this command, the module will transmit the specified size binary data after finishing sending the correspondent message (+OK). Format (ASCII):
AT+SKRCV=<socket>,<maxsize><CR>
+OK=<size><CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd.
[data steam]
Parameter:
socket: socket number maxsize: the maximum length of the receivable data size: the length of the actual received data data steam: original data 2.2.3.16 AT+SKSTT Function:
Get the specified socket status, the first line of the return value means user-specified socket status information. If the socket type is TCP server, then from the next line, each line represents a socket status of a connected client. Format (ASCII):
AT+SKSTT=<socket><CR>
+OK=<socket>,<status>,[host],[HostPort],[LocalPort],[rx_data]<CR><LF>
[socket],[status],[host],[HostPort],[ LocalPort],[rx_data]<CR><LF>
...
<CR><LF>
Parameter:
socketsocket number statussocket status Value Meaning 0 1 2 Disconnection Detecting Connection host: ip address of the opposite terminal HostPort: port number of the opposite terminal LocalPort: the local port number rx_data: data size in the receiving buffer Beijing Winner Microelectronics Co., Ltd. 2.2.3.17 AT+SKCLS Function:
Close the specified socket. Format (ASCII):
AT+SKCLS=<socket><CR>
+OK<CR><LF><CR><LF>
Parameter:
socket: socket number 2.2.3.18 AT+SKSDF Function:
Set the default sending socket of the system. If users need to enter the transparent transmission mode in command mode, using this command can specify the transparent serial data transmission destination. Format (ASCII):
AT+SKSDF=<socket><CR>
+OK<CR><LF><CR><LF>
Parameter:
socket: socket number 2.2.3.19 AT+SKSRCIP Function:
Get current socket receiving data source IP address. Format (ASCII):
AT+SKSRCIP=?<CR>
+OK=[host]<CR><LF><CR><LF>
Parameter:
Host: IP address of data source Beijing Winner Microelectronics Co., Ltd. 2.2.3.20 AT+SKRPTM Function:
Turn on/off socket initiative reporting and receiving data function. Format (ASCII):
AT+SKRPTM=<mode><CR>
+OK<CR><LF><CR><LF>
Parameter:
Mode Value 0 1 Close Open Meaning 2.2.3.21 AT+ONESHOT Function:
Turn on/off one-shot configuration function. Format (ASCII):
AT+ONESHOT=<status><CR>
+OK<CR><LF><CR><LF>
Parameter:
status:
Value 0 1 Close Open Meaning 2.2.3.22 AT+HTTPC Function:
Http post get function. Format (ASCII):
Beijing Winner Microelectronics Co., Ltd. AT+HTTPC=<url>,<verb>,<postdata><CR>
+OK<CR><LF><CR><LF>
Parameter:
url: remote http server-side address;
verb:
Value Meaning 0 1 2 3 http get
-
http post http put post data:
Upload data to http when verb is 2, 3. 2.2.4 System debug type 2.2.4.1 AT+&DBG Function:
Set the system debugging mode. Format (ASCII):
AT+&DBG=<bit_enable><CR>
+OK[=bit_enable]<CR><LF><CR><LF>
Parameter:
bit_enable: hexadecimal notation, each bit refers to a debugging function, 0 - disable, 1 enable 2.2.4.2 AT+®R Function:
Read register or memory space, the unit is 32bit word, the maximum is 8 words. Format (ASCII):
AT+®R=<address>,[num]<CR>
Beijing Winner Microelectronics Co., Ltd.
+OK=<value1>,[value2]...<CR><LF><CR><LF>
Parameter:
address: register base address num: register number, the default setting is 1 value: register value 2.2.4.3 AT+®W Function:
Modify register or memory space, the unit is 32bit word, the maximum is 8 words. Format (ASCII):
AT+®W=<address><value1>,[value2]...<CR>
+OK=<CR><LF><CR><LF>
Parameter:
address: register address num: register number value: register value 2.2.4.4 AT+&RFR Function:
Read RF register space, the unit is 16bit word, the maximum is 8 words. Format (ASCII):
AT+&RFR=<address>,[num]<CR>
+OK=<value1>,[value2]...<CR><LF><CR><LF>
Parameter:
address: register base address num: register number, the default setting is 1 value: register value 2.2.4.5 AT+&RFW Function:
Beijing Winner Microelectronics Co., Ltd. Modify RF register space, the unit is 16bit word, the maximum is 8 words. Format (ASCII):
AT+&RFW=<address><value1>,[value2]...<CR>
+OK=<CR><LF><CR><LF>
Parameter:
address: register address num: register number ( only for HEX format command) value: register value 2.2.4.6 AT+&FLSR Function:
Read SPI Flash space, the unit is 32bit word, the maximum is 8 words. Format (ASCII):
AT+&FLSR=<address>,[num]<CR>
+OK=<value1>,[value2]...<CR><LF><CR><LF>
Parameter:
address: register base address num: register number, the default setting is 1 value: register value 2.2.4.7 AT+&FLSW Function:
Modify SPI Flash space, the unit is 32bit word, the maximum is 8 words. Format (ASCII):
AT+&FLSW=<address><value1>,[value2]...<CR>
+OK=<CR><LF><CR><LF>
Parameter:
address: register base address num: register number, the default setting is 1 Beijing Winner Microelectronics Co., Ltd. value: register value 2.2.4.8 AT+&UPDM Function:
Firmware upgrade mode set by the user interface (UART/SPI). Format (ASCII):
AT+&UPDM=?![mode]<CR>
+OK[=mode]<CR><LF><CR><LF>
Parameter:
mode: system operation mode 0 - normal 1 upgrade mode 2.2.4.9 AT+&UPDD Function:
Send online upgrade data. Format (ASCII):
AT+&UPDD=<size><CR>[data stream]
+OK<CR><LF><CR><LF>
Parameter:
size: data length data stream: upgrade date 2.2.4.10 AT+&UPDP Function:
Used to change the factory settings. Format (ASCII):
AT+&UPDP=<mode><CR>
+OK<CR><LF><CR><LF>
Beijing Winner Microelectronics Co., Ltd. Parameter:
mode:
Value Meaning Enable modify factory parameter area, save the 1 modified parameters to the user factory parameters area after setting. Disable modify factory parameter area, save the 0 modified parameters to the user parameters area after setting If you need to change the parameters of the user parameter area of the factory, the first UPDP mode is set to 1, and then modify the parameters you need, UPDP mode is set to 0 after modify completed, so that the modified parameters are saved to the user area of the factory parameters. 3 Common operation 3.1 Create AP process 1WPRT Set wireless NIC operating mode as AP AT+WPRT=2 2SSID Set wireless NIC network name of STA as MyAp AT+SSID=MyAp 3ENCRY Set wireless NIC encryption mode as WEP64 AT+ENCRY=1 Parameter:open0WEP641WEP1282 4KEY Set wireless NIC key as 12345 AT+KEY=1,1,12345 Parameter 1: key format, 0 represents HEX, 1 represents ASCII Parameter 2: index: key index number, 14 for WEP encryption key, other encryption method is fixed at 0 Parameter 3: wireless key. For example: 12345 Beijing Winner Microelectronics Co., Ltd. 5NIP Set ip address and subnet mask AT+NIP=1,192.168.1.1,255.255.255.0,192.168.1.1,192.168.1.1 Parameter 1: address type, 0 refers to using DHCP dynamic allocation, 1 refers to the static address Parameter 2: ip: 192.168.1.1 Parameter 3: netmask: 255.255.255.0 Parameter 4: gateway: 192.168.1.1 Parameter 5: dns: 192.168.1.1 6PMTF Save parameters to spi flash AT+PMTF 7Z Reset wireless NIC AT+Z 8Delay 1 second 9WJOIN Create wireless network MyAp AT+WJOIN 3.2 Scan AP process AT cmd for wireless NIC scanning AP: AT+WSCAN 3.3 STA joins AP process 1WPRT Set operating mode as STA AT+WPRT=0 2SSID Set the added AP name , such as WinnerMicro AT+SSID=WinnerMicro 3KEY Set the added AP wireless key 12345 AT+KEY=1,0,12345678 Parameter 1: key format, 0 represents HEX, 1 represents ASCII Parameter 2: index: key index number, 14 for WEP encryption key, other encryption method is fixed at 0 Parameter 3: wireless key. For example: 12345678 Beijing Winner Microelectronics Co., Ltd. 5NIP Start DHCP AT+NIP=0 6PMTF Save parameters to spi flash AT+PMTF 7Z Reset wireless NIC AT+Z 8Delay 1 second 8WJOIN Join wireless network WinnerMicro AT+WJOIN 3.4 How to disconnect AP by STA AT cmd for wireless NIC disconnecting AP: AT+WLEAV 3.5 How to view the current status by STA AT cmd for wireless NIC querying current NIC status: AT+LKSTT 3.6 How to use socket function 1Build a PC-side TCP server. If using TCP debugging assistant, TCP server address is 192.168.253.1, listening port 1000. Beijing Winner Microelectronics Co., Ltd. 2Set up Socket:
TX:
AT+SKCT=0,0,192.168.253.1,1000,1000 RX:
+OK=1 ---> 1 is socket number Beijing Winner Microelectronics Co., Ltd. 3Sending data:
TX:
AT+SKSND=1,5 kevin RX +OK=5 Beijing Winner Microelectronics Co., Ltd. The data interface received by TCP server is as follows:
4Receiving data:
Beijing Winner Microelectronics Co., Ltd. Input sending data hello in the TCP debugging assistant interface, and click Sending. TX AT+SKRCV=1,5 RX +OK=5 hello Beijing Winner Microelectronics Co., Ltd. 5Query Socket status:
TX AT+SKSTT=1 RX +OK=1,2,"192.168.253.1",1000,1000,0 6Close Socket connection Beijing Winner Microelectronics Co., Ltd. TX AT+SKCLS=1 RX +OK FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. The end product (host system) shall have a label showing: Contains FCC ID 2AGQ7WMSP02
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-01-11 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-01-11
|
||||
1 | Applicant's complete, legal business name |
Beijing Winner Microelectronics Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0025099763
|
||||
1 | Physical Address |
1802,17th floor, Yindu Building
|
||||
1 |
Beijing, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AGQ7
|
||||
1 | Equipment Product Code |
WMSP02
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X****** H********
|
||||
1 | Telephone Number |
010-6********
|
||||
1 | Fax Number |
010-6********
|
||||
1 |
h******@winnermicro.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Single Modular approval. Power listed is the maximum conducted output power. Approval is limited to OEM installation only. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen BCTC Technology Co., Ltd.
|
||||
1 | Name |
J**** Z******
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
j******@btc-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0235500 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC