SNCode 128 L820100003105 13 Product: Mi Router HD Model: R3D Manufacturer: Beijing Xiaomi Electronics Co., Ltd. Address: No.58 Yard, Fifth Jinghai Road, Beijing Economic-Technological Development Area, Beijing, China. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC ID: 2AIMRMIWIFIR3D Beijing Xiaomi Electronics Co., Ltd. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1 2 Setup Thank you for choosing Mi Router HD 3 Steps to get online. Download Mi Wi-Fi app Scan the QR code to download and install the Mi Wi-Fi app. 3 4 Introduction Learn about Mi Router HD WANlnternet) Power LED light FAQ 7 8 Here's what the colors of the LED light mean:
Off/Grey The router is off or disconnected from the power outlet Yellow The router is being updated (flashing) or rebooted (steady) Blue The router works normally (steady) Red The router is in safe mode (flashing), or a system error occurred (steady)
* See FAQ when the LED light is red Mi Router HD I connected the network cable and completed the setup process. Why can't I connect to the Internet ?
Check if the cable is connected properly. Make sure you've entered the username and password provided by your network provider correctly.Test network using Mi Wi-Fi app, or try to open a website in your browser. Follow the instructions provided in the results of the network diagnostics. These are the possible problems and their solutions:
Error 678: Your network provider doesn't allow using the same account to login twice. Solution: Re-connect the network cable, turn off and reboot your Fiber Modem/ADSL modem/network switch, wait for 10 minutes, and try again. Error 691: Your password is incorrect, or the account you're using has expired. Solution: Make sure your login and password are correct, confirm the information about your account with the network provider. What is the default address and password of the admin platform ?
Mi Wi-Fi admin platform can be found at miwifi.com or 192.168.31.1. The default password is the same password you set during the initial setup. Why is the LED light red after a reboot ?
If the LED light is blinking red, it means that the router can't finish the reboot due to an error and has entered safe mode. In such case, your files are protected. You can connect the router to the computer via network cable, and then re-flash and restore your router. If the red light is steady, it means that the router can't finish the reboot and can't enter safe mode. Please contact your local Mi Home or customer support to solve the problem. V1.0 20170714 V1.1 20170807 9 10 Quality of Service Assign priority to each device and service operating on your network. Control the amount of bandwidth each is allowed to consume based on its mission. Parental Controls Block inappropriate and potentially harmful sites. Restrict Internet access during specific time. Connect AC power and network cable Connect AC power adapter to the router by attaching power cables. Connect the network cable to the WAN port.
* The other end of network cable should be connected to Fiber Modem/ADSL modem/network switch, or contact your ISP for assistance. Connect to Wi-Fi and open the app Connect your mobile device or computer to the Wi-Fi network (network name: Xiaomi_XXXX), open the Mi Wi-Fi app, and follow instructions.
* XXXX are the 4 last digits of the router's MAC address
(see the bottom of the device). Xiaomi_XXXX Connect Xiaomi_XXXX_5G Connect Public MIOffice 4-antennae design. Stronger signal, better coverage 4 omni-directional antennae allow higher speed and better wall penetration. 5G Dual-band AC network with MU-MIMO support Seamless connectivity with multiple devices, speed up to 2533Mbps. Ports and buttons Compatible with Gigabit Ethernet broadband interface 1 WAN port and 3 LAN ports. New and faster USB 3.0 Connect external storage via USB and share files wirelessly. Manage your network using the mobile app Anti-hijacking, sharing media files. Regular updates Equipped with the smart system Mi Wi-Fi, which is constantly optimized and updated to improve stability and security. Power button Turn the router on and off 12V 3A Power adapter outlet Connect Mi Router power adapter USB port Connect USB devices (supports USB 3.0) Reset Reset button Press to reset the router Gigabit LAN Ethernet ports Connect devices using network cable Gigabit WAN Ethernet ports Connect Mi Router to the Internet
* Use Gigabit-compatible network cables for best effect. 5 6 Back up photos from your phone Connect to Wi-Fi and back up photos automatically
(setup in the Mi Wi-Fi app). Digital camera backups Connect your camera to Mi Router via USB to back up new photos automatically. Access files anywhere View and open files stored on Mi Router directly from the app on your mobile devices. Huge storage for media files Save media files on Mi Router's hard drive and stream them on your mobile devices. M31 L820100003105 PANTONE 291C PANTONE 2925C PANTONE 7546C PANTONE 7543C 157g 163X110mm X2 10 6.3 6.3.1 0.5mm 6.3.2 1. 2. 3. 3.1 3.2 3.3 600-800ZUX 30cm,45() 3.4 10-12S 4 4.1 4.2 5 5.1 5.2 5.3 6. 6.1 6.1.1 6.1.2 6.1.3 6.2 6.2.1 huber 150 6.2.2