FCC ID: 2A26V-RS41010 Galois 3D Smart Camera

GALOIS Instruction realsee.com VR SCANNER UDER GUIDE Features of Galois Detailed scanning of environmental information 8k pixels Depth sensors Solutions both indoor and outdoor Scanning radius up to 10 metres Lidar Power light ON/OFF button Fisheye lens Galois Shooting Process 1 Setting Up Prepare the Device Prepare the Room Installation device Setting Up Prepare the Device iPhone APP Tripod Realsee Galois iPhone 7 or above Realsee VR APP 1.3 -1.5meters high Setting Up Prepare the Room for Shooting Clean up the room Turn on all lights Open all doors Open all the curtains The narrow space needs to open 45 Tips: pay attention to the storage of private items. Setting Up Installation device The tripod should be set at 1.3 meters Attach the camera to the tripod and twist until it does not wobble, but do not twist too hard Tips: when mounting, hold the camera with both hands and gradually fix it to the tripod. Galois Shooting Process 2 Capturing a Space Creating a new project Connection of camera Capture Point scanning Marking features Preview/Upload Capturing a Space Creating a new project Login to the Realsee App. Tap on the blue capture icon. Select to capture with Gimbal, enter the tour name and add a new tour. Capturing a Space Connection of camera Press and hold the on button for 2 seconds, then remove both front and side lens covers. Capturing a Space Capture You can start your scan at the entrance, front door area of a room or house. Or simply start from a relatively empty area Move to the next scan point. Scan the whole room according to your path plan. Once the data is generated, the point will turn blue and then move on to the next point. Red point: data being downloaded Blue point: data have been downloaded Note:

Do not block the lens or radar during capturing. Capturing a Space Point scanning Starting with the first point, align the points using 'Manual Alignment' or Auto Align. Note:

When aligning manually, choose an easily recognisable reference to make alignment easier. When capturing stairs, you will also need to align the height. Capturing a Space Mark Features Add mark features in spaces with mirrors or glass. a. Cut point cloud: cut redundant point cloud in the horizontal direction b. Add window: add mirror feature where there is a window c. Add mirror: add mirror features where there is a mirror d. Add vertical scissor: cut redundant point clouds in the vertical direction Capturing a Space Preview/Upload After shooting, preview to make sure that points are not missed and that points are aligned. Note:

Once capturing is complete, you can leave the site and upload the data in an office or home Wi-Fi environment with good internet access. Galois Shooting Process 3 Editing APP editing Workshop editing Editing APP editing Info: edit Project name, VR tag, Address, Space introduction etc. Initial view: set the initial point after entering the VR Floorplan: preliminary editing of the floorplan, including: adding doors and windows, changing room names Label: add text labels (Maximum 15 characters per label) Audio guide: add pre-recorded content Editing WORKSHOP Editing PC website: https://new-workshop.realsee.jp/

Note:

Account and password are the same as logging into Realsee VR APP. VR information: edit Project information, contact information, shooting information etc. Basic settings: set the initial point after entering the VR and add BGM Label: add text label and multimedia label (1 audio file, or 5 video or image files) Navigation: avigation creates a flythrough for a VR tour Filter: filter can alter the light contrast seen during the tour Blur Tool: blocks sensitive items or features from view during a tour Editing WORKSHOP Editing PC website: https://new-workshop.realsee.jp/

Note:

Account and password are the same as logging into Realsee VR APP. Floorplan: edit floorplan for your VR tour Thanks FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

MREALSEE 3D SMART CAMERA Model:RS41010 20V===1.9A FCCID:2A26V-RS41010 1C:27444-RS4101025 Beike Technology Co.,Ltd. CAN ICES-3(B)/NMB-3(B) Made in China

Beike Technology Co., Ltd. U.S. Agent Designation for Service of Process -

Certification Attestation Letter 3/27/2023 ATTN.: Reviewing Engineer FCC ID: 2A26V-RS41010 Per section 2.911(d)(7) of the FCC rules,Beike Technology Co.,Ltd. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent*

for service of process:

Company Name: Realsee Technology USA Limited FCC Registration Number (FRN): 0033472796 Physical U.S. Company Address: 40 Lake Bellevue Dr.STE 100 WASHINGTON Contact Person: Tanya Tsai Agent Email Address: realsee_technology@realsee.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant):

earner 7 ota CrinWew ie Signed: Signed:

Printed name: Qin wei Printed name: Tanya Tsai Title: Manager Title: Manager Company Name: Beike Technology Co.,Ltd. Company Name: Realsee Technology USA Limited Date: 3/27/2023 Date: 3/27/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

Beike Technology Co.,Ltd. Class II permissive change Request Model: RS41010,RS41025 Brand :TREALSEE To whom it may concern:

Pursuant to CFR 2.1043, Beike Technology Co.,Ltd. hereby requests a Class II The differences between them as below: Replacing a laser module. So need to retest EMC Clients signature Clients name / title: Qin Wei / Manager Tel:++8613811977381 Email: qinwei009@ke.com

Beike Technology Co.,Ltd. Covered Equipment Certification Attestation Letter 4/13/2023 FCC ID:2A26V-RS41010 Beike Technology Co.,Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Beike Technology Co.,Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Qin Wei Title: Manager Company Name: Beike Technology Co.,Ltd. Date: 4/13/2023

Beike Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023-4-13 SUBJECT: FCC Application for FCC ID: 2A26V-RS41010 To Whom It May Concern:

We, the undersigned, hereby authorize Bruce Zhang at Jianyan Testing Group Shenzhen Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Bruce Zhang on our behalf shall have the same effects as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Beike Technology Co., Ltd. Qin Wei

+8613811977381 2023-4-13

Beike Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:2A26V-RS41010 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type 1. Schematic 2. Block Diagram;

3. Circuit Description, 4. BOM File Name SCH Block Operational Description BOM The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name SHORT-TERM request Sincerely,

(signature):

(printed name): Qin Wei Rev 11/20/07

Declaration Letter circuit design, layout, components used and _ internal wiring, with only difference being the detection range of LIDAR. Sincerely yours Signature: Qin Wev Name/Title: Qin Wei / Manager Tel. No.: +8613811977381 E-Mail: qinwei009@ke.com Company: Beike Technology Co., Ltd. Date: 2022-10-19