FCC ID: K7SF5D7633-4 ADSL Modem with High-Speed Mode Wireless-G Router

s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Introduction Thank you for purchasing the Belkin ADSL Modem with High-Speed Mode Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network. Please be sure to read through this User Manual completely, and pay special attention to Appendix B entitled Important Factors for Placement and Setup. Product Features Compatibility with Both PCs and Mac Computers The Router supports a variety of networking environments including Mac OS 8.x, 9.x, X v10.x, AppleTalk, Linux, Windows 95, 98SE, Me, NT, 2000, and XP, and others. You need an Internet browser and a network adapter that supports TCP/IP (the standard language of the Internet). Front-Panel LED Display Lighted LEDs on the front of the Router indicate which functions are in operation. Youll know at-a-glance whether your Router is connected to the Internet. This feature eliminates the need for advanced software and status-monitoring procedures. Web-Based Advanced User Interface You can set up the Routers advanced functions easily through your web browser, without having to install additional software onto the computer. There are no disks to install or keep track of and, best of all, you can make changes and perform setup functions from any computer on the network quickly and easily. Integrated 10/100 4-Port Switch The Router has a built-in, 4-port network switch to allow your wired computers to share printers, data and MP3 files, digital photos, and much more. The switch features automatic detection so it will adjust to the speed of connected devices. The switch will transfer data between computers and the Internet simultaneously without interrupting or consuming resources. Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that achieves data rates up to 54Mbps, nearly five times faster than 802.11b. 1 1 Introduction Introduction 125 High-Speed Mode High-Speed Mode (HSM)*, a 54g performance enhancement, provides the fastest wireless connectivity for 802.11g-capable networks in real-world environments. It is designed for home networks that require additional bandwidth for applications such as sharing digital pictures. 125HSM makes 802.11g WLANs more efficient without impacting the performance of neighboring networks, and it is compatible at high speeds with leading brands. Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network. The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup. NAT IP Address Sharing Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding additional IP addresses to your Internet service account. SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding. MAC Address Filtering For added security, you can set up a list of MAC addresses (unique client identifiers) that are allowed access to your network. Every computer has its own MAC address. Simply enter these MAC addresses into a list using the web-based user interface and you can control access to your network. Universal Plug-and-Play (UPnP) Compatibility UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Support for VPN Pass-Through If you connect to your office network from home using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router and to your office network. 2 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Introduction

*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput of up to or greater than 34.1Mbps, which is the equivalent throughput of a system following 802.11g protocol and operating at a signaling rate of 125Mbps. Actual throughput will vary depending on environmental, operational, and other factors. Benefits of a Home Network By following our simple setup instructions, you will be able to use your Belkin home network to:

Share one high-speed Internet connection with all the computers in your home Share resources, such as files, and hard drives among all the connected computers in your home Share a single printer with the entire family Share documents, music, video, and digital pictures Store, retrieve, and copy files from one computer to another Simultaneously play games online, check Internet email, and chat Advantages of a Belkin Wireless Network Mobility youll no longer need a dedicated computer room now you can work on a networked laptop or desktop computer anywhere within your wireless range Easy installation Belkins Easy Installation Wizard makes setup simple Flexibility set up and access printers, computers, and other networking devices from anywhere in your home Easy Expansion the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles No cabling required you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office Widespread industry acceptance choose from a wide range of interoperable networking products 3 3 Make Sure You Have the Following ADSL Modem with High-Speed Mode Wireless G Router RJ11 Telephone Cord - Gray RJ45 Ethernet Networking Cable - Yellow ADSL Microfilter*

Power Adapter User Manual CD Package Contents

*ADSL microfilter varies by country. If its not included, you will need to purchase one. System Requirements An active ADSL service with a telephone wall jack for connecting the Router At least one computer with a Network Interface Card (NIC) and Internet browser installed and correctly configured TCP/IP networking protocol installed on each computer connected to the Router No other DHCP server on your local network assigning IP addresses to computers and devices Internet Connection Settings Please collect the following information from your Internet Service Provider

(ISP) before setting up the ADSL Modem Wireless G Router. Internet connection protocol: _________ (PPPoE, PPPoA, Dynamic IP, Static IP) Multiplexing method or Encapsulation: __________ (LLC or VC MUX) VCI (Virtual Channel Identifier) __________

(a number between 1 and 65535) Virtual circuit: VPI (Virtual Path Identifier) __________

(a number between 0 and 255) For PPPoE and PPPoA users: ADSL account user name _____________ and password _______________ For static IP users: IP Address ___ . ___ . ___ IP address for Domain Name Server ___ . ___ . ___ . ___ (If given by your ISP) Subnet Mask ___ . ___ . ___ Default Gateway Server ___ . ___ . ___ . Note: See Appendix C in this User Manual for some common DSL Internet setting parameters. If you are not sure, please contact your ISP. 4 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Knowing your Router The Router is designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status. Front Panel

(1)

(2)

(5)

(4)

(3) 1. Power LED When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. When the Router has completely booted up, the Power LED becomes a SOLID light, indicating the Router is ready for use. OFF Green Red Router is OFF Router is ON Router failed to start 2. LAN Status LED These LAN Status LEDs are labeled 14 and correspond to the numbered ports on the rear of the Router. When a computer is properly connected to one of the LAN ports on the rear of the Router, the LED will light. Solid GREEN means a computer or a network-enabled device is connected. When information is being sent over the port, the LED blinks rapidly. ORANGE indicates a 10Base-T connection. OFF Orange Your device is connected Ethernet link is up and 10Base-T device connected Orange - blinking When 10Base-T device transmitting or receiving data Green Ethernet link is up and 100Base-T connected Green - blinking When 100Base-T device transmitting or receiving data 5 5 Knowing your Router 3. WLAN Status LED The WLAN Status LED is solid GREEN when you enable the wireless LAN function. It flashes when the Router is transmitting or receiving data wirelessly. OFF Green WLAN is off WLAN is up and connected Green - blinking When transmitted or receiving data 4. ADSL LED The ADSL LED flashes GREEN during negotiation with your ISP. It stays GREEN when the Router is connected properly to your ADSL service. OFF Green no ADSL connection ADSL link is up and connected Green - blinking negotiating connection 5. Internet LED The Internet LED shows you when the Router is connected to the Internet. When the LED is OFF, the Router is NOT connected to the Internet. When the LED is solid GREEN, the Router is connected to the Internet. When the LED is blinking, the Router is transmitting or receiving data from the Internet. OFF Green No Internet connection Connected to the Internet Green - blinking When transmitting or receiving data Red Failed to get IP 6 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Knowing your Router Back Panel

(6)

(7)

(8)

(9) 6. DSL Line This port is for connection to your ADSL line. Connect your ADSL line to this port. 7. Ethernet Ports The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. Connect your network-enabled computers or any networking devices to one of these ports. 8. Reset Button The Reset button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Routers normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Resetting the Router Push and hold the Reset button for one second then release it. When the Power/Ready light becomes solid again, the reset is complete. b. Restoring the Factory Defaults Press and hold the Reset button for five seconds then release it. When the Power/Ready light becomes solid again, the restore is complete. 9. Power Plug Connect the included 15V DC power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router. 7 7 Connecting your Router Positioning your Router Your wireless connection will be stronger the closer your computer is to your Router. Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your Router connected devices increases. This may or may not be noticeable to you. As you move farther from your Router, connection speed may decrease. Factors that can weaken signals simply by getting in the way of your networks radio waves are metal appliances, or obstructions, and walls. Please see Appendix B:

Important Factors for Placement and Setup in this User Manual for more guidelines. If you have concerns about your networks performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the Router, in order to see if distance is the problem. If difficulties persist even at close range, please see the Troubleshooting section for solutions. 8 Connecting your Router Connecting your Computers 1. Power off your computers and networking equipment. 2. Connect your computer to one of the YELLOW RJ45 ports on the rear of the Router labeled connections to your computers by using an Ethernet networking cable (one Ethernet network cable is supplied). s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 9 9 Connecting your Router Connecting your ADSL Line Connection for the Router to the ADSL line varies by country and region. Typically it involves a microfilter or a microfilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line. Please read the following steps carefully and select appropriate method. 1. 2. If your telephone service and ADSL service are on the same telephone line, ADSL microfilters are needed for each telephone and device, such as answering machine, fax machine, and caller ID display. Additional splitters may be used to separate telephone lines for telephone and the Router. Note: Do not connect the ADSL microfilter between the wall jack and the Routerthis will prevent ADSL service from reaching the modem. If your telephone service and ADSL service are on the same telephone line and you are using an ADSL microfilter with built-in splitter, connect the splitter to the telephone wall jack providing ADSL service. Then, connect the telephone cord from the ADSL microfilter RJ11 port generally labeled DSL to the gray RJ11 port labeled DSL line on the back of your Router. Connect telephony device to the other port on the ADSL splitter commonly labeled Phone. An additional ADSL microfilter is needed for another telephone and device on the same line. 10 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Connecting your Router Note: One RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. 3. 4. If you have a dedicated ADSL service telephone line with an RJ11 wall jack, simply connect a telephone cord from the wall jack to the gray RJ11 port labeled DSL line on the back of your Router. If you have an RJ45 wall jack for your ADSL service, connect an RJ45-to-RJ11 converter to the wall jack. Then connect one end of a telephone cord to the converter and the other end to the gray RJ11 port labeled DSL line on the back of your Router. Note: ADSL microfilter may or may not be provided depending on your country. 11 11 Connecting your Router Powering Up your Router 1. Connect the supplied power adapter to the Router power-input plug labeled Power. Note: For safety and performance reasons, only use the supplied power adapter to prevent damage to the Router. 2. After connecting the power adapter and the power source is turned on, the Routers power icon on the front panel should be on. It might take a few minutes for the Router to fully set up. 3. Turn on your computers. After your computers boot up, the LAN on the front of the Router will be on for each port status LED to which a wired computer is connected. These lights show you the connection and activity status. Now you are ready to configure the Router for ADSL connection. 12 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Setting Up your Computers In order for your computer to properly communicate with your Router, you will need to change your computers TCP/IP Ethernet settings to Obtain an IP address automatically/Using DHCP. This is normally the default setting in most home computers. You can set up the computer that is connected to the ADSL modem FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. Manually Configuring Network Adapters in Windows XP, 2000, or NT 1. Click Start, Settings, then Control Panel. 2. Double-click on the Network and dial-up connections icon

(Windows 2000) or the Network icon (Windows XP). 3. Right-click on the Local Area Connection associated with your 4. network adapter and select Properties from the drop-down menu. In the Local Area Connection Properties window, click Internet Protocol (TCP/IP) and click the Properties button. The following screen will appear:

(1)

(2)

(3) 5. If Use the following IP address (2) is selected, your Router will need to be set up for a static IP connection type. Write the address information the table below. You will need to enter this information into the Router. 6. If not already selected, select Obtain an IP address automatically

(1) and Obtain DNS server address automatically (3). Click OK. Your network adapter(s) are now configured for use with the Router. 13 13 Setting Up your Computers Manually Configuring Network Adapters in Windows 98SE or Me 1. Right-click on My Network Neighborhood and select Properties from the drop-down menu. 2. Select TCP/IP -> settings for your installed network adapter. You will see the following window.

(1)

(2)

(3) 3. If Specify an IP address is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. 4. Write the IP address and subnet mask from the IP Address tab (3). 5. Click the Gateway tab (2). Write the gateway address down in the chart. 6. Click the DNS Configuration tab (1). Write the DNS address(es) 7. in the chart. If not already selected, select Obtain an IP address automatically on the IP address tab. Click OK. Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Router. 14 Setting Up your Computers Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. Manually Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Router, you will need to change your Mac computers TCP/IP settings to DHCP. 1. Pull down the Apple menu. Select Control Panels and select TCP/IP. 2. You will see the TCP/IP control panel. Select Ethernet Built-In or Ethernet in the Connect via: drop-down menu (1).

(1)

(2) 3. Next to Configure (2), if Manually is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 15 15 Setting Up your Computers 4. If not already set, at Configure:, choose Using DHCP Server. This will tell the computer to obtain an IP address from the Router. 5. Close the window. If you made any changes, the following window will appear. Click Save. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router. 16 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Setting Up your Computers Manually Configuring Network Adapters in Mac OS X 1. Click on the System Preferences icon. 2. Select Network (1) from the System Preferences menu.

(1) 3. Select Built-in Ethernet (2) next to Show in the Network menu.

(2)

(3)

(4) 17 17 Setting Up your Computers 4. Select the TCP/IP tab (3). Next to Configure (4), you should see Manually or Using DHCP. If you do not, check the PPPoE tab (5) to make sure that Connect using PPPoE is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password. If Manually is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into the Router. 5. 6. If not already selected, select Using DHCP next to Configure

(4), then click Apply Now. Your network adapter(s) are now configured for use with the Router. 18 s e c t i o n 1 2 3 4 5 6 7 8 9 10 11 12 Setting Up your Computers Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browsers settings. If you are having trouble accessing the Internet or the advanced web-based user interface, then change your browsers settings to the recommended settings in this section. Internet Explorer 4.0 or Higher 1. Start your web browser. Select Tools then Internet Options. 2. In the Internet Options screen, there are three selections:

Never dial a connection, Dial whenever a network connection is not present, and Always dial my default connection. If you can make a selection, select Never dial a connection. If you cannot make a selection, go to the next step. 3. Under the Internet Options screen, click on Connections and select LAN Settings. 19 19 Setting Up your Computers 4. Make sure there are no check marks next to any of the displayed options: Automatically detect settings, Use automatic configuration script, and Use a proxy server. Click OK. Then click OK again in the Internet Options page. Netscape Navigator 4.0 or Higher 1. Start Netscape. Click on Edit then Preferences. 2. In the Preferences window, click on Advanced then select Proxies. In the Proxies window, select Direct connection to the Internet. 20 Configuring your Router with the Setup Wizard Running the Setup Wizard 1. You can access the web-based management user interface of the Router using the Internet browser on a computer connected to the Router. Type 192.168.2.1 (do not type in anything else such as http:// or www) in your browsers address bar. Then press the Enter key. Note: It is strongly recommended that you use a computer physically connected to the Router with an RJ45 cable for initial setup. Using a wirelessly connected computer for initial setup is not recommended. 2. The following screen will appear in your browser to prompt you to log in. The default User Name is Admin and the default Password is Admin. Enter both User Name and Password, then click the Submit button to log in. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Note: It is strongly recommended that you change the password to your own for increased security. Please read the following section, entitled Manually Configuring your Router, for details on how to change your password and to reference other security features. 21 21 Configuring your Router with the Setup Wizard 3. A Status page will follow showing detail status of your Router. Next, click on the Setup Wizard button for express configuration (recommended). 4. Click on the Setup Wizard button to start the Routers Setup Wizard. The first step is to select your connection type (this information is provided by your ISP) and click Next. 22 Configuring your Router with the Setup Wizard 5. Now enter the required values provided by your ISP. For the PPPoE or PPPoA page you will see the following screen. Enter the required values provided by your ISP and click Next. Note: For more detailed instruction on other connection types, please refer to the Manually Configuring your Router section of this User Manual. 6. Double-check the settings shown on the following screen. You can click Back to change the settings or click Apply to activate your settings. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting. 23 23 Configuring Your Router with the Setup Wizard Connecting to the Wireless LAN 7. Now you can connect to the Router via a wireless-LAN-enabled computer with the following default wireless LAN settings:

Wireless Channel = 11 SSID = belkin54g Security = off Note: Belkin strongly recommends that you enable wireless security to WEP or WPA and change SSID to something of your own. Please read the User Manual for details on levels of wireless security and how to change your security settings. 8. Congratulations! You have finished installing your new Belkin Router. To test your Internet connection, open your browser and visit any website, such as www.belkin.com. For advanced features and more detailed installation and security setup information, see the following section, Manually Configuring your Router. 24 Manually Configuring your Router Understanding the Web-Based User Interface The home page shows you a quick view of the Routers status and settings. All advanced setup pages can be reached from this page.

(10)

(2)

(3)

(4)

(5)

(6)

(1)

(9)

(7)

(8) 1. Quick-Navigation Links You can go directly to any of the Routers UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find. Clicking on the header of each tab will show you a short description of the tabs function. 2. Home Button The Home button is available in every page of the UI. Pressing this button will take you back to the home page. 3. Help Button The Help button gives you access to the Routers help pages. Help is also available on many pages by clicking more info next to certain sections of each page. 4. Login/Logout Button This button enables you to log in and out of the Router with the press of one button. When you are logged into the Router, this button will change to read Logout. Logging into the Router will 25 25 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router Manually Configuring your Router Configuring Your Router with the Setup Wizard take you to a separate login page where you will need to enter a password. When you are logged into the Router, you can make changes to the settings. When you are finished making changes, you can log out of the Router by clicking the Logout button. For more information about logging into the Router, see the section called Logging into the Router. 5. Internet Status Indicator This indicator is visible in all pages of the Router, showing the connection status of the Router. When the indicator says connection OK in GREEN, the Router is connected to the Internet. When the Router is not connected to the Internet, the indicator will read no connection in RED. The indicator is automatically updated when you make changes to the settings of the Router. 6. LAN Settings Shows you the settings of the Local Area Network (LAN) side of the Router. Changes can be made to the settings by clicking the LAN Quick Navigation link on the left side of the screen. 7. Features Shows the status of the Routers UPnP, NAT, and firewall features. Changes can be made to the settings by clicking on any one of the links or by clicking the Quick Navigation links on the left side of the screen. 8. Internet Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the Internet/WAN Quick Navigation link on the left side of the screen. 9. Version Info Shows the firmware version, boot-code version, hardware version, and serial number of the Router. 10. Page Name The page you are on can be identified by this name. This manual will sometimes refer to pages by name. For instance, LAN > LAN Settings refers to the LAN Settings page. 26 Manually Configuring your Router Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. Clicking on the header of the LAN tab (1) will take you to the LAN tabs header page. A quick description of the functions can be found here. To view the settings or make changes to any of the LAN settings, click on LAN Settings (2) or to view the list of connected computers, click on DHCP Client List (3).

(1)

(2)

(3) 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 27 27 Manually Configuring your Router Manually Configuring your Router LAN Settings

(1)

(2)

(3)

(4)

(5)

(6) 1. IP Address The IP address is the internal IP address of the Router. The default IP address is 192.168.2.1. To access the setup interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP address, type in the new IP address and click Apply Changes. The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255) 2. Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. 3. DHCP Server The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network automatically. The default setting is On. The DHCP server can be turned OFF if necessary, however, in order to do so you must manually set a static IP address for each computer on your network. To turn off the DHCP server, select Off and click Apply Changes. IP Pool The IP Pool is the range of IP addresses set aside for dynamic assignment to the computers on your network. The default is 4. 28 Manually Configuring your Router 2100 (99 computers). If you want to change this number, you can do so by entering a new starting and ending IP address and clicking on Apply Changes. The DHCP server can assign 100 IP addresses automatically. This means that you cannot specify an IP address pool larger than 100 computers. For example, starting at 50 means you have to end at 150 or lower so as not to exceed the 100-client limit. The starting IP address must be lower in number than the ending IP address. 5. Lease Time Lease time is the length of time the DHCP server will reserve the IP address for each computer. We recommend that you leave the lease time set to Forever. The default setting is Forever, meaning that any time a computer is assigned an IP address by the DHCP server, the IP address will not change for that particular computer. Setting lease times for shorter intervals, such as one day or one hour, frees IP addresses after the specified period of time. This also means that a particular computers IP address may change over time. If you have set any of the other advanced features of the Router, such as DMZ or client IP filters, these are dependent on the IP address. For this reason, you will not want the IP address to change. 6. Local Domain Name The default setting is Belkin. You can set a local domain name

(network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as MY NETWORK. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 29 29 Manually Configuring your Router Manually Configuring your Router DHCP Client List You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address (1) of the computer, the host name (2) (if the computer has been assigned one), and the MAC address (3) of the computers Network Interface Card (NIC). Pressing the Refresh (4) button will update the list. If there have been any changes, the list will be updated.

(1)

(2)

(3)

(4) Internet WAN The Internet WAN tab is where you will set up your Router to connect to your Internet Service Provider. The Router is capable of connecting to virtually any ADSL Service Providers system provided you have correctly configured the Routers settings for your ISPs connection type. Your connection settings are provided to you by your ISP. To configure the Router with the settings that your ISP gave you, click Connection Type (1) on the left side of the screen. Select the connection type you use. If your ISP gave you DNS settings, clicking DNS (2) allows you to enter DNS address entries for ISPs that require specific settings. When you have finished making settings, the Internet Status indicator will read Connection OK if your Router is set up properly.

(1)

(2) 30 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router Connection Type From the Connection Type page, you can select one of these five connection types based on the instruction provided by your ISP:

PPPoE PPPoA Dynamic IP (1483 Bridged) Static IP (IPOA) Modem Only (Disable Internet Sharing) Note: See Appendix C in this User Manual for some common DSL Internet setting parameters. If you are not sure, please contact your ISP. Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking Next (2).

(1)

(2) 31 31 Manually Configuring your Router Manually Configuring your Router Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet. PPPoA (PPP over ATM) is similar to PPPoE, but is mostly implemented in the UK. Select PPPoE or PPPoA and click Next. Then enter the information provided by your ISP, and click Apply Changes to activate your settings.

(1)

(2)

(3)

(4)

(5)

(6)

(7) 1. User Name - Enter the user name. (Assigned by your ISP). 2. Password - Enter your password. (Assigned by your ISP). 3. Retype Password - Confirm the password. (Assigned by your ISP). 4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). 5. Encapsulation - Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads. LLC: PPPoA Logical Link Control allows multiple protocols running over one virtual circuit (more overhead). 6. Dial on Demand - By selecting Dial on Demand your Router will automatically connect to the Internet when a user opens up a web browser. 7. Idle Time (Minutes) - Enter the maximum idle time for the Internet connection. After this time has been exceeded, the connection will be terminated. 32 Manually Configuring your Router Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISPs network together. The Router will obtain an IP address automatically from your ISPs DHCP server.

(1)

(2) 1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. These identifiers are assigned by your ISP. 2. Encapsulation - Select LLC or VC MUX your ISP uses. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 33 33 Manually Configuring your Router Manually Configuring your Router Setting your ISP Connection to Static IP (IPoA) This connection type is also called Classical IP over ATM or CLIP, which your ISP provides a fixed IP for your Router to connect to the Internet.

(1)

(2)

(3)

(4)

(5) 1. WAN IP Address Enter an IP address assigned by your ISP for the Router WAN interface. 2. WAN Subnet Mask - Enter a subnet mask assigned by your ISP. 3. Default Route - Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by your ISP. 4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. These identifiers are assigned by your ISP. 5. Encapsulation - Select LLC or VC MUX your ISP uses. 34 Manually Configuring your Router Setting your Connection Type to Modem Only (Disable Internet Sharing) In this mode, the Router simply acts as a bridge passing packets across the DSL port. It requires additional software to be installed on your computers in order to access the Internet.

(1) 1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). 2. Encapsulation - Select LLC or VC MUX. (Assigned by your ISP). DNS (Domain Name Server) Settings A Domain Name Server is a server located on the Internet that translates Universal Resource Links (URLs) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. The Automatic from ISP box (1) should be checked if your ISP did not give you a specific DNS address. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly. If your connection type is dynamic or PPPoE, it is likely that you do not have to enter a DNS address. Leave the Automatic from ISP box checked. To enter the DNS address settings, uncheck the Automatic from ISP box and enter your DNS entries in the spaces provided. Click Apply Changes (2) to save the settings.

(1) 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n

(2) 35 35 Manually Configuring your Router Manually Configuring your Router Wireless The Wireless tab lets you make changes to the wireless network settings. From this tab, you can make changes to the wireless network name (SSID), operating channel, and encryption security settings. Channel and SSID

(1)

(2) 1. Changing the Wireless Channel There are a number of operating channels you can choose from. In the United States, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements. Your Router is configured to operate on the proper channels for the country you reside in. The default channel is 11 (unless you are in a country that does not allow channel 11). The channel can be changed if needed. If there are other wireless networks operating in your area, your network should be set to operate on a channel that is different than the other wireless networks. For best performance, use a channel that is at least five channels away from the other wireless networks. For instance, if another network is operating on channel 11, then set your network to channel 6 or below. To change the channel, select the channel from the drop-down list. Click Apply Changes. The change is immediate. 2. Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is belkin54g. You can change this to anything you want to or you can leave it unchanged. If there are other wireless networks operating in your area, you will want to make sure that your SSID is unique (does not match that of another wireless network in the area). To change the SSID, type in the SSID that you want to use in the SSID field (1) and click Apply Changes (2). The change is immediate. If you make 36 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name. Refer to the documentation of your wireless network adapter for information on making this change. 3. Using the ESSID Broadcast Feature For security purposes, you can choose not to broadcast your networks SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks. To turn off the broadcast of the SSID, select DISABLE and then click Apply Changes. The change is immediate. Each computer now needs to be set to connect to your specific SSID; an SSID of ANY will no longer be accepted. Refer to the documentation of your wireless network adapter for information on making this change. Note: This advanced feature should be employed by advanced users only. 4. Using the Wireless Mode Switch Your Router can operate in three different wireless modes:

802.11g-Auto, 802.11g-Only, and 802.11g-LRS. The different modes are explained below. 802.11g-Auto - In this mode, the Router is compatible with 802.11b and 802.11g wireless clients simultaneously. This is the factory default mode and ensures successful operation with all Wi-Fi-compatible devices. If you have a mix of 802.11b and 802.11g clients in your network, we recommend setting the Router to 802.11g-Auto mode. This setting should only be changed if you have a specific reason to do so. 802.11g-Only Mode - 802.11g-Only mode works with 802.11g clients only. This mode is recommended only if you want to prevent 802.11b clients from accessing your network. To switch modes, select the desired mode from the Wireless Mode drop-down box. Then, click Apply Changes. 802.11g-LRS Mode - We recommend you DO NOT use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 802.11g and 802.11b standards. When to Use 802.11g-LRS Mode - In some cases, older 802.11b clients may not be compatible with 802.11g wireless technology. These adapters tend to be of inferior design and may use older drivers or technology. 802.11g-LRS (Limited Rate Support) allows 37 37 Manually Configuring your Router Manually Configuring your Router these clients to be compatible with the newer 802.11g technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category, first check with the adapter vendor to see if there is a driver update. If there is no driver update available, switching to 802.11g-LRS mode may fix your problem. Please note that switching to 802.11g-LRS mode may decrease 802.11g performance slightly. 5. Protected Mode Switch As part of the 802.11g specification, Protected mode ensures proper operation of 802.11g clients and access points when there is heavy 802.11b traffic in the operating environment. When Protected mode is ON, 802.11g scans for other wireless network traffic before it transmits data. Therefore, using this mode in environments with HEAVY 802.11b traffic or interference achieves best performance results. If you are in an environment with very littleor nowireless network traffic, your best performance will be achieved with Protected mode OFF. 6. Using High-Speed Mode The Router supports two high-speed modes: 125HSM* (High-Speed Mode) and Frame Bursting. Selecting 125HSM Mode will result in all devices running in 125HSM if all devices are capable of 125Mbps speeds. If any non-125HSM device connects or associates with the network, the Router will automatically shift the entire network back to Frame Bursting mode. Selecting Frame Bursting Mode will result in all devices capable of Frame Bursting to function in Frame Bursting mode, and all clients not capable, to operate in normal 802.11g modes. Frame Bursting mode supports both Frame Bursting-enabled devices and non-Frame Bursting-enabled devices simultaneously. Frame Bursting mode is based on the unreleased 802.11e specification. Selecting Off will disable Turbo mode.

*When operating in High-Speed Mode, this Wi-Fi device may achieve an actual throughput of up to or greater than 34.1Mbps, which is the equivalent throughput of a system following 802.11g protocol and operating at a signaling rate of 125Mbps. Actual throughput will vary depending on environmental operational and other factors. 38 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home office, and small office user. At the time of this User Manuals publication, there are three encryption methods available. Name 64-bit Wired Equivalent Privacy 128-bit Wired Equivalent Privacy Wi-Fi Protected Access-TKIP With Protected Access Acronym 64-bit WEP 128-bit WEP WPA-TKIP WPA-AES Security Good Better Best Best Features Static keys Static keys Dynamic key encryption and mutual authentication. Dynamic key encryption and mutual authentication. Encryption keys based on RC4 algorithm

(typically 40-bit keys) More secure than 64-bit WEP using a key length of 104 bits plus 24 additional bits of system generated data. TKIP (temporal key integrity protocol) added so that keys are rotated and encryption is strengthened. AES (Advanced Encryption Standard) does not cause any throughput loss. WEP (Wired Equivalent Privacy) WEP is a common protocol that adds security to all Wi-Fi-compliant wireless products. WEP was designed to give wireless networks the equivalent level of privacy protection as a comparable wired network. 64-Bit WEP 64-bit WEP was first introduced with 64-bit encryption, which includes a key length of 40 bits plus 24 additional bits of system-generated data (64 bits total). Some hardware manufacturers refer to 64-bit as 40-bit encryption. Shortly after the technology was introduced, researchers found that 64-bit encryption was too easy to decode. 39 39 Manually Configuring your Router Manually Configuring your Router 128-Bit WEP As a result of 64-bit WEPs potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total). Some hardware manufacturers refer to 128-bit as 104-bit encryption. Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting either the 64-bit or 128-bit WEP encryption mode, it is critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another on your network and you will not be able to successfully communicate within your network. You can enter your key by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a mixture of numbers and letters from AF and 09. For 64-bit WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to enter 26 hex keys. For instance:

AF 0F 4B C3 D4 = 64-bit WEP key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key The WEP passphrase is NOT the same as a WEP key. Your wireless card uses this passphrase to generate your WEP keys, but different hardware manufacturers might have different methods for generating the keys. If you have equipment from multiple vendors in your network, you can use the hex WEP key from your Router or access point and enter it manually into the hex WEP key table in your wireless cards configuration screen. 40 Manually Configuring your Router WPA (Wi-Fi Protected Access) WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that was designed to improve upon the security features of WEP. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support WPA. These updates will be found on the wireless vendors websites. There are two types of WPA security:

WPA-PSK (no server) and WPA (with radius server). WPA-PSK (no server) This method uses what is known as a Pre-Shared key as the Network key. A Network key is basically a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or characters. Each client uses the same Network key to access the network. Typically, this is the mode that will be used in a home environment. WPA (with radius server) With this system, a radius server distributes the Network key to the clients automatically. This is typically found in a business environment. For a list of Belkin wireless products that support WPA, please visit our website at www.belkin.com/networking. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 41 41 Manually Configuring your Router Manually Configuring your Router Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same Network key. Network key=

MyPassword Wireless G Desktop Network Card Network key=

MyPassword Network key=

MyPassword Wireless G Router Wireless G Notebook Network Card Network key=

WRONG Password Wireless G Desktop Network Card The Wireless G Desktop Network Card cannot access the network because it is using a different Network key than the Network key that is configured on the Wireless G Router. 42 Manually Configuring your Router Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from AF and 09. 64-bit keys are five two-digit numbers. 128-bit keys are 13 two-digit numbers. For instance:

AF 0F 4B C3 D4 = 64-bit key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key In the boxes below, make up your key by writing in two characters between AF and 09 in each box. You will use this key to program the encryption settings on your Router and your wireless computers. Note to Mac users: Original Apple AirPort products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 43 43 Manually Configuring your Router Manually Configuring your Router WEP Setup 64-Bit WEP Encryption 1. Select 64-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually. A hex (hexadecimal) key is a mixture of numbers and letters from AF and 09. For 64-bit WEP, you need to enter 10 hex keys. For instance:

AF 0F 4B C3 D4 = 64-bit WEP key 3. Click Apply Changes to finish. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are configuring the Wireless Router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client. If this is not done, you will lose your wireless connection. 44 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router 128-Bit WEP Encryption 1. Select 128-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key manually by typing in the hex key manually. A hex (hexadecimal) key is a mixture of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 hex keys. For instance:

C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key 3. Click Apply Changes to finish. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are configuring the Wireless Router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client. If this is not done, you will lose your wireless connection. 45 45 Manually Configuring your Router Manually Configuring your Router Changing the Wireless Security Settings Your Router is equipped with WPA (Wi-Fi Protected Access), the latest wireless security standard. It also supports the legacy security standard, WEP (Wired Equivalent Privacy). By default, wireless security is disabled. To enable security, you must first determine which standard you want to use. To access the security settings, click Security on the Wireless tab. WPA Setup Note: To use WPA security, all your clients must be upgraded to drivers and software that support it. At the time of this User Manuals publication, a security patch download is available free from Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsofts patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products. There are two types of WPA security: WPA-PSK (no server) and WPA

(with radius server). WPA-PSK (no server) uses a so-called Pre-Shared key as the security key. A Pre-Shared key is a password that is between eight and 63 characters long. It can be a combination of letters, numbers, and other characters. Each client uses the same key to access the network. Typically, this mode will be used in a home environment. WPA (with radius server) is a configuration wherein a radius server distributes the keys to the clients automatically. This is typically used in a business environment. 46 Manually Configuring your Router Setting WPA-PSK (no server) 1. From the Security Mode drop-down menu, select WPA-PSK

(no server). 2. For Encryption Technique, select TKIP or AES. This setting will have to be identical on the clients that you set up. 3. Enter your Pre-Shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. For example, your PSK might be something like: Smith family network key. 4. Click Apply Changes to finish. You must now set all clients to match these settings. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 47 47 Manually Configuring your Router Manually Configuring your Router Setting WPA (with radius server) Settings If your network uses a radius server to distribute keys to the clients, use this setting. 1. From the Security Mode drop-down menu, select WPARadius server). 2. For Encryption Technique, select TKIP or AES. This setting will have to be identical on the clients that you set up 3. Enter the IP address of the radius server into the Radius Server fields. 4. Enter the radius key into the Radius Key field. 5. Enter the key interval. Key interval is how often the keys are distributed (in packets). 6. Click Apply Changes to finish. You must now set all clients to match these settings. Configuring your Belkin Wireless G Network Cards to Use Security Please Note: This section provides information on how to configure your Belkin Wireless G Network Cards to use security. At this point, you should already have your Wireless Router or access point set to use WPA or WEP. In order for you to gain a wireless connection, you will need to set your wireless notebook card and wireless desktop card to use the same security settings. 48 Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires a 64-Bit or 128-Bit WEP Key 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your wireless card. 2. Under the Wireless Network Properties tab, select a network name from the Available networks list and click Configure. 3. Under Data Encryption select WEP. 4. Ensure the check box Network key is provided for me automatically at the bottom is unchecked. If you are using this computer to connect to a corporate network, please consult your network administrator if this box needs to be checked. 5. Type your WEP key in the Network key box. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Important: A WEP key is a mixture of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP, you need to enter 10 keys. This Network key needs to match the key you assign to your Wireless Router or access point. 6. Click OK to save the settings. 49 49 Manually Configuring your Router Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires WPA-PSK (no server) 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your wireless card. 2. Under the Wireless Networks tab, select a network name from the Available networks list and click Configure. 3. Under Network Authentication select WPA-PSK (No Server). 4. Type your WPA key in the Network key box. Important: WPA-PSK is a mixture of numbers and letters from AZ and 09. For WPA-PSK you can enter eight to 63 keys. This Network key needs to match the key you assign to your Wireless Router or access point. 5. Click OK to save the settings. 50

1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router Connecting your Computer to a Wireless Network that Requires WPA (with radius server) 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your wireless card. 2. Under the Wireless Networks tab, select a network name from the Available networks list and click Configure. 3. Under Network Authentication select WPA. 4. Under the Authentication tab, select the settings that are indicated by your network administrator. 5. Click OK to save the settings. Setting Up WPA for a Non-Belkin Wireless Desktop and Wireless Notebook Cards For non-Belkin WPA Wireless Desktop and Wireless Notebook Cards that are not equipped with WPA-enabled software, a file from Microsoft called Windows XP Support Patch for Wireless Protected Access is available as a free download. Please Note: The file that Microsoft has made available works only with Windows XP. Other operating systems are not supported at this time. 51 51 Manually Configuring your Router Manually Configuring your Router Important: You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems:

Windows XP Professional Windows XP Home Edition Setting Up Windows XP Wireless Network Utility to Use WPA-PSK In order to use WPA-PSK, ensure you are using Windows Wireless Network Utility by doing the following:

1. Under Windows XP, click Start > Control Panel >

Network Connections. 2. Right-click on Wireless Network Connection, and select Properties. 3. Clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings check box is checked. 52 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router 4. Under the Wireless Networks tab, click the Configure button, and you will see the following screen. 5. For a home or small business user, select WPA-PSK under Network Authentication. Note: Select WPA if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 6. Select TKIP or AES under Data Encryption. This setting will have to be identical to the Router that you set up. 7. Type in your encryption key in the Network Key box. Important: Enter your Pre-Shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 8. Click OK to apply settings. 53 53 Manually Configuring your Router Manually Configuring your Router Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including:

IP with zero length IP Spoofing Land Attack Ping of Death (PoD) Denial of Service (DoS) Smurf Attack TCP Null Scan SYN flood UDP flooding Tear Drop Attack RIP defect Fragment flooding ICMP defect The firewall also masks common ports that are frequently used to attack networks. These ports appear to be Stealth, meaning that essentially they do not exist to a would-be hacker. You can turn the firewall function off if needed; however, it is recommended that you leave the firewall enabled. Disabling the firewall protection will not leave your network completely vulnerable to hacker attacks, but it is recommended that you leave the firewall enabled. 54 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router Virtual Servers Virtual servers allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications, through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be seen. If you need to configure the virtual server function for a specific application, you will need to contact the application vendor to find out which port settings you need. You can manually input this port information into the Router. Choosing an Application A list of popular applications has been included to choose from. Click on Select a Service then select your application from the drop-down list. The settings will be transferred to the first row available. Click Add to save the setting for that application. Manually Entering Settings into the Virtual Server To manually enter settings, click on Custom Server and enter a name for the server. Enter the Server IP address in the space provided for the internal machine and the port(s) required to pass. Then select the protocol type (TCP or UDP), and then click Add. Opening ports in your firewall can pose a security risk. You can enable and disable settings very quickly. It is recommended that you disable the settings when you are not using a specific application. 55 55 Manually Configuring your Router Manually Configuring your Router Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers.

(1)

(2)

(3)

(4) To restrict Internet access to a single computer for example, enter a name of the filter in Filter Name box (1) and IP address of the computer you wish to restrict access to in the IP field (2). Next, enter 80:80 in the Port field (3). Select protocol from the Protocol drop-down box (4). Click Apply Changes. The computer at the IP address you specified will now be blocked from Internet access. MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter a name for the user and the MAC address of each client on your network to allow network access. Next, click Add to save the settings. 56 Manually Configuring your Router DMZ (Demilitarized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. This may be necessary if the NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature on a temporary basis. The computer in the DMZ is not protected from hacker attacks. To put a computer in the DMZ, enter its LAN IP address in the Private IP field and click Apply Changes for the change to take effect. Blocking an ICMP Ping Computer hackers use what is known as pinging to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there. The Router can be set up so it will not respond to an ICMP ping from the outside. This heightens the level of security of your Router. To turn off the ping response, select Block ICMP Ping (1) and click Apply Changes. The Router will not respong to an ICMP Ping. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 57 57 Manually Configuring your Router Manually Configuring your Router Utilities The Utilities screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings. 58 Manually Configuring your Router Restarting the Router to Restore Normal Operation 1. Click the Restart Router button. 2. The following message will appear. Click OK to restart your Router. Restore Factory Defaults Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. 1. Click the Restore Defaults button. 2. The following message will appear. Click OK to restore factory defaults. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 59 59 Manually Configuring your Router Manually Configuring your Router Saving/Backup Current Settings You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update. 1. Click Save. A window called File Download will open. Click Save. 2. A window will open that allows you to select the location in which to save the configuration file. Select a location. There are no restrictions on the file name, however, be sure to name the file so you can locate it yourself later. When you have selected the location and entered the file name, click Save. 60 Manually Configuring your Router 3. When the save is complete, you will see the window below. Click Close. The configuration is now saved. Restore Previous Settings This option will allow you to restore a previously saved configuration. 1. Click Browse. A window will open that allows you to select the location of the configuration file. All configuration files end with a .bin. Locate the configuration file you want to restore and double-click on it. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 2. Then, click Open. 61 61 Manually Configuring your Router Manually Configuring your Router Firmware Update From time to time, Belkin may release new versions of the Routers firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Routers firmware to the latest version. Updating the Routers Firmware 1. In the Firmware Update page, click Browse. A window will open that allows you to select the location of the firmware update file. 2. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name. 3. Click Update to upgrade to the latest firmware version. 62 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Manually Configuring your Router System Settings The System Settings page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the UPnP function of the Router. Setting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router. Changing the Login Time-Out Setting The login time-out option allows you to set the period of time that you can be logged into the Routers advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking Logout. Assuming the time-out is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note: Only one computer can be logged into the Routers advanced setup interface at one time. 63 63 Manually Configuring your Router Manually Configuring your Router Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to record the security log and control client filtering. Select desired NTP time servers and the time zone that you reside in, then click Apply Changes. The system clock may not update immediately. Allow at least 15 minutes for the Router to contact the time servers on the Internet and get a response. You cannot set the clock yourself. Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Routers settings from anywhere on the Internet. Click on the Change Settings button to bring up the Remote Management page. There are two methods of remotely managing the Router. The first is to allow access to the Router from anywhere on the Internet by selecting Any IP address can remotely manage the Router. By typing in your WAN IP address from any computer on the Internet, you will be presented with a login screen where you need to type in the password of your Router. The second method is to allow a specific IP address only to remotely manage the Router. This is more secure, but less convenient. To use this method, enter the IP address you know you will be accessing the Router from in the space provided and select Only this IP address can remotely manage the Router. Before you enable this function, it is STRONGLY RECOMMENDED that you set your administrator password. Leaving the password empty will potentially open your Router to intrusion. 64 Manually Configuring your Router Click on the Apply Changes button to save your settings. Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Routers firewall to be configured in a specific way to operate properly. This usually requires opening TCP and UDP ports, and in some instances, setting trigger ports. An application that is UPnP-

compliant has the ability to communicate with the Router, basically telling the Router which way it needs the firewall configured. The Router ships with the UPnP feature disabled. If you are using any applications that are UPnP-compliant, and wish to take advantage of the UPnP features, you can enable the UPnP feature. Click on the Change Setting button to bring up the UPnP Setting page. Then select On for Enable UPnP. Click on the Apply Changes button to save your settings. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 65 65 Troubleshooting Problem:

The ADSL LED is not on. Solution:

1. Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled DSL Line. 2. Make sure the Router has power. The Power LED on the front panel should be illuminated. Problem:

The Internet LED is not on. Solution:

1. Make sure the cable from the ADSL line is connected to the port on the Router labeled DSL Line and the ADSL LED is on. 2. Make sure you have the correct VPI/VCI, user name, and password from your ISP provider. Problem:

My connection type is static IP address. I cant connect to the Internet. Solution:

Since your connection type is static IP address, your ISP must assign you the IP address, subnet mask, and gateway address. Instead of using the Wizard, go to Connection Type, and then select your connection type. Click Next, select Static IP, and enter your IP address, subnet mask, and default gateway information. Problem:

Ive forgotten or lost my password. Solution:

Press and hold the Reset button on the rear panel for at least six seconds to restore the factory defaults. 66 Troubleshooting Problem:

My wireless PC cannot connect to the Router. Solution:

1. Make sure the wireless PC has the same SSID settings as the Router, and you have the same security settings on the clients such as WPA or WEP encryption. 2. Make sure the distance between the Router and wireless PC are not too far away. Problem:

The wireless network is often interrupted. Solution:

1. Move your wireless PC closer to the Router to find a better signal. 2. There may also be interference, possibly caused by a microwave oven or 2.4GHz cordless phones. Change the location of the Router or use a different wireless channel. Problem:

I cant connect to the Internet wirelessly. Solution:

If you are unable to connect to the Internet from a wireless computer, please check the following items:

1. Look at the lights on your Router. If you are using a Belkin Router, 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n the lights should be as follows:

The Power light should be on. The Connected light should be on, and not blinking. The WAN light should be either on or blinking. 2. Open your wireless utility software by clicking on the icon in the system tray at the bottom right-hand corner of the screen. If youre using a Belkin Wireless Card, the tray icon should look like this. The icon may be red or green. 3. The exact window that opens will vary depending on the model of wireless card you have; however, any of the utilities should have a list of Available Networks those wireless networks it can connect to. 67 67 Troubleshooting Does the name of your wireless network appear in the results?

Yes, my network name is listedgo to the troubleshooting solution titled I cant connect to the Internet wirelessly, but my network name is listed. No, my network name is not listedgo to the troubleshooting solution titled I cant connect to the Internet wirelessly, and my network name is not listed. Problem:

I cant connect to the Internet wirelessly, but my network name is listed. Solution:

If the name of your network is listed in the Available Networks list, please follow the steps below to connect wirelessly:

1. Click on the correct network name in the Available Networks list. 2. If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, see the page entitled: Changing the Wireless Security Settings. 3. Within a few seconds, the tray icon in the lower left-hand corner of your screen should turn green, indication a successful connection to the network. Problem:

I cant connect to the Internet wirelessly, and my network name is not listed. Solution If the correct network name is not listed under Available Networks in the wireless utility, please attempt the following troubleshooting steps:

1. Temporarily move computer, if possible, five to 10 feet from the Router. Close the wireless utility, and re-open it. If the 68 Troubleshooting 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n correct network name now appears under Available Networks, you may have a range or interference problem. Please see the suggestions discussed in Appendix B entitled Important Factors for Placement and Setup. 2. Using a computer that is connected to the Router via a network cable (as opposed to wirelessly), ensure that Broadcast SSID is enabled. This setting is found on the Routers wireless Channel and SSID configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem:

My wireless network performance is inconsistent. Data transfer is sometimes slow. Signal strength is poor. Difficulty establishing and/or maintaining a Virtual Private Network

(VPN) connection. Solution:

Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 to 200 feet. Note also that connection speed may decrease as you move farther from the Router or access point. In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, five to 10 feet from the Router. Changing the wireless channel - Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. The default channel the Router is shipped with is channel 11, you may choose from several other channels depending on your region; see the section entitled Changing the Wireless Channel on page 37 for instructions on how to choose other channels. 69 69 Troubleshooting Limiting the wireless transmit rate - Limiting the wireless transmit rate can help improve the maximum wireless range, and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property, go to the Windows Control Panel, open Network Connections and double-click on your wireless cards connection. In the Properties dialog, select the Configure button on the General tab (Windows 98 users will have to select the wireless card in the list box and then click Properties), then choose the Advanced tab and select the rate property. Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment; note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless cards user manual. Problem:

I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point. Solution 1. Log into your Wireless Router or access point. 2. Open your web browser and type in IP address of the Wireless Router or access point. (The Router default is 192.168.2.1, the 802.11g access point is 192.168.2.254 ). Log into your Router by clicking on the Login button in the top right-hand corner of the screen. You will be asked to enter your password. If you never set a password, leave the password field blank and click Submit. 3. Click the Wireless tab on the left of your screen. Select the Encryption or Security tab to get to the security settings page. 4. Select 128-bit WEP from the drop-down menu. 5. After selecting your WEP encryption mode, you can type in your hex WEP key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a WEP key from the passphrase. Click Apply Changes to finish. You must now set all of your clients to match these settings. A hex

(hexadecimal) key is a mixture of numbers and letters from A-F 70 Troubleshooting 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n and 0-9. For 128-bit WEP, you need to enter 26 hex keys. For example:

C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key 6. Click Apply Changes to finish. Encryption in the Wireless Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are configuring the Wireless Router or Access Point from a computer with a wireless client, you will need to ensure that security is turned on for this wireless client. If this is not done, you will lose your wireless connection. Note to Mac users: Original Apple AirPort products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your Apple AirPort product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption. Problem:

I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Card. Solution:

The Wireless Card must use the same key as the Wireless Router or access point. For instance, if your Wireless Router or access point uses the key 00112233445566778899AABBCC, then the Wireless Card must be set to the exact same key. 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your Card. 2. The Advanced button will allow you to view and configure more options of the Card. 3. Once the Advanced button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 4. Under the Wireless Network Properties tab, select a network name from the Available networks list and click the Properties button. 71 71 Troubleshooting 5. Under Data Encryption select WEP. 6. Ensure the check box The key is provided for me automatically at the bottom is unchecked. If you are using this computer to connect to a corporate network, please consult your network administrator if this box needs to be checked. 7. Type your WEP key in the Network key box. Important: A WEP key is a mixture of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 keys. This Network key needs to match the key you assign to your Wireless Router or access point. For example:

C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key 8. Click OK, and then Apply to save the settings. If you are NOT using a Belkin Wireless Card, please consult the manufacturer for that wireless client cards user manual. Problem:

Do Belkin products support WPA?

Solution Note: To use WPA security, all your clients must be upgraded to drivers and software that support it. At the time of this FAQ publication, a security patch download is available, for free, from Microsoft. This patch works only with the Windows XP operating system. Download the patch here:

http://www.microsoft.com/downloads/details. aspx?FamilyID=009d8425-ce2b-47a4-abec-274845dc9e91&displayl ang=en You also need to download the latest driver for your Belkin Wireless 802.11g Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsofts patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products. Download the latest driver at:

http://web.belkin.com/support/networkingsupport.asp. 72 Troubleshooting 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a home network. Solution:

1. From the Security Mode drop-down menu, select WPA-PSK

(no server). 2. For Encryption Technique, select TKIP or AES. This setting will have to be identical on the clients that you set up. 3. Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols or spaces. This same key must be used on all of the clients that you set up. For example, your PSK might be something like: Smith family network key. 4. Click Apply Changes to finish. You must now set all clients to match these settings. Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a business. Solution:

If your network uses a radius server to distribute keys to the clients, use this setting. This is typically used in a business environment. 1. From the Security Mode drop-down menu, select WPA

(with server). 2. For Encryption Technique, select TKIP or AES. This setting will have to be identical on the clients that you set up. 3. Enter the IP address of the radius server into the Radius Server fields. 4. Enter the radius key into the Radius Key field. 5. Enter the key interval. Key interval is how often the keys are distributed (in packets). 6. Click Apply Changes to finish. You must now set all clients to match these settings. 73 73 Troubleshooting Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network. Solution:

Clients must use the same key that the wireless router or access point uses. For instance if the key is Smith Family Network Key in the wireless router or access point, the clients must also use that same key. 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your Card. 2. The Advanced button will allow you to view and configure more options of the Card. 3. Once the Advanced button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 4. Under the Wireless Network Properties tab, select a network name from the Available networks list and click the Properties button. 5. Under Network Authentication select WPA-PSK (no server). 6. Type your WPA key in the Network key box. Important: WPA-PSK is a mixture of numbers and letters from AZ and 09. For WPA-PSK you can enter eight to 63 characters. This network key needs to match the key you assign to your Wireless Router or access point. 7. Click OK, then Apply to save the settings. Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a business. Solution:

1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your Card. 2. The Advanced button will allow you to view and configure more options of the Card. 3. Once the Advanced button is clicked, the Belkin Wireless LAN 74 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Troubleshooting Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 4. Under the Wireless Network Properties tab, select a network name from the Available networks list and click the Properties button. 5. Under Network Authentication select WPA. 6. In the Authentication tab, select the settings that are indicated by your network administrator. 7. Click OK, then Apply to save the settings. Problem:

I am having difficulty setting up Wi-Fi Protected Access (WPA) security and I am NOT using a Belkin Wireless Card for a home network. Solution:

If you are NOT using a Belkin Wireless Desktop or Wireless Notebook Network Card and it is not equipped with WPA-enabled software, a file from Microsoft called Windows XP Support Patch for Wireless Protected Access is available for free download. Download the patch from Microsoft by searching the knowledge base for Windows XP WPA. Note: The file that Microsoft has made available works only with Windows XP. Other operating systems are not supported at this time. You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems:

Windows XP Professional Windows XP Home Edition Enabling WPA-PSK (no server) 1. Under Windows XP, click Start > Control Panel > Network Connections. 2. Right-clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings check box is checked. 75 75 Troubleshooting 3. Under the Wireless Networks tab, click the Configure button, and you will see the following screen. 4. For a home or small business user, select WPA-PSK under Network Administration. Note: Select WPA (with radius server) if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 5. Select TKIP or AES under Date Encryption. This setting will have to be identical to the wireless router or access point that you set up. 6. Type in your encryption key in the Network Key box. Important: Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 7. Click OK to apply settings. Whats the difference between 802.11b, 802.11g, 802.11a, and Pre-N?

Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards. The most common wireless networking standard, 802.11b, transmits information at 11Mbps;

802.11a and 802.11g work at 54Mbps; and Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming 802.11n release, promises speeds that exceed 802.11g, and up to twice the wireless coverage area. See the following chart for more detailed information. 76 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Troubleshooting Wireless Comparison Chart l y g o o n h c e T s s e e r i l W b 1 1

. 2 0 8 g 1 1

. 2 0 8 a 1 1

. 2 0 8 i n k e B l N

e r P Speed 11Mbps 54Mbps 54Mbps 108Mbps Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz 5GHz -

uncrowded band Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g Compatible with 802.11b Incompatible with 802.11b or 802.11g Compatible with 802.11g or 802.11b y c n e u q e r F y t i l i b i t a p m o C e Depends on interference

- typically 100200 ft. indoors g a r e v o C Depends on interference

- typically 100 200 ft. indoors n o i t p o d A Mature widely adopted Expected to continue to grow in popularity Less interference

- range is typically 50-100 ft. Slow adoption for consumers

more popular in business environments 8x the coverage of standard 802.11g Expected to continue to grow in popularity 77 77 Technical Support Information Technical Support For latest software updates or if you have any further questions regarding installation of this product, please visit www.belkin.com/networking or contact:

877-736-5771 or US:

310-898-1100 ext. 2263 00 800 223 55 460 Europe:

Australia:

1800 235 546 New Zealand: 0800 235 546 800 616 1790 Singapore:

78 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Appendixes Appendix A: Glossary IP Address The IP address is the internal IP address of the Router. To access the advanced setup interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP address, type in the new IP address and click Apply Changes. The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.x.x (where x is anything between 0 and 255) 10.x.x.x (where x is anything between 0 and 255) Subnet Mask Some networks are far too large to allow all traffic to flood all its parts. These networks must be broken down into smaller, more manageable sections, called subnets. The subnet mask is the network address plus the information reserved for identifying the subnetwork. DNS DNS is an acronym for Domain Name Server. A Domain Name Server is a server located on the Internet that translates URLs (Universal Resource Links) like www.belkin.com to IP addresses. Many ISPs do not require you to enter this information into the Router. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly. If your connection type is Dynamic or PPPoE, it is likely that you do not have to enter a DNS address. PPPoE Most ADSL providers use PPPoE as the connection type. If you use an ADSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. Your connection type is PPPoE if:

1. Your ISP gave you a user name and password which is required to connect to the Internet. 2. Your ISP gave you software such as WinPoET or Enternet300 that you use to connect to the Internet. 79 79 Appendixes 3. You have to double-click on a desktop icon other than your browser to get on the Internet. To set the Router to use PPPoE, type in your user name and password in the spaces provided. After you have typed in your information, click Apply Changes. After you apply the changes, the Internet Status indicator will read connection OK if your Router is set up properly. PPPoA Enter the PPPoA information in the provided spaces, and click Next. Click Apply to activate your settings. 1. User name - Enter the user name. (Assigned by your ISP). 2. Password - Enter your password. (Assigned by your ISP). 3. Retype Password - Confirm the password. (Assigned by your ISP). 4. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). Disconnect after X... This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering 5 into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute. Channel and SSID To change the channel of operation of the Router, select the desired channel from the drop-down menu and select your channel. Click Apply Changes to save the setting. You can also change the SSID. The SSID is the equivalent to the wireless networks name. You can make the SSID anything you want to. If there are other wireless networks in your area, you should give your wireless network a unique name. Click inside of the SSID box and type in a new name. Click Apply Changes to make the change. 80 1 2 3 4 5 6 7 8 9 s e c t i o n 10 11 12 Appendixes ESSID Broadcast Many wireless network adapters currently on the market possess a feature known as site survey. It scans the air for any available network and allows each computer to automatically select a network from the survey. This occurs if the computers SSID is set to ANY. Your Belkin Router can block this random search for a network. If you disable the ESSID Broadcast feature, the only way a computer can join your network is by its SSID being set to the specific name of the network (like WLAN). Be sure that you know your SSID (network name) before enabling this feature. It is possible to make your wireless network nearly invisible. By turning off the broadcast of the SSID, your network will not appear in a site survey. Obviously, turning off the broadcast feature of the SSID helps increase security. Encryption Setting encryption can help keep your network secure. The Router uses Wired Equivalent Privacy (WEP) encryption to protect your data and features two rates of encryption: 64-bit and 128-bit. Encryption works on a system of keys. The key on the computer must match the key on the Router, and there are two ways to make a key. The easiest is to let the Routers software convert a passphrase youve created into a key. The advanced method is to enter the keys manually. Virtual Servers This function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, machines from the Internet cannot get to them because they cannot be seen. If you need to configure the virtual server function for a specific application, you will need to contact the application vendor to find out which port settings you need. To manually enter settings, enter the IP address in the space provided for the internal machine, the port type (TCP or UDP), and the LAN and public port(s) required to pass. Then select Enable and click Set. You can only pass one port per internal IP address. Opening ports in your firewall can pose a security risk. You can enable and disable settings very quickly. It is recommended that you disable the settings when you are not using a specific application. 81 81 Appendixes Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. URL Blocking To configure the URL blocking feature, specify the websites (www. somesite.com) and/or keywords you want to filter on your network. Click Apply Changes to activate the change. To complete this configuration, you will need to create or modify an access rule in the client IP filters section. To modify an existing rule, click the Edit option next to the rule you want to modify. To create a new rule, click on the Add PC option. From the Access Control Add PC section, check the option for WWW with URL Blocking in the Client PC Service table to filter out the websites and keywords specified. Schedule Rule To configure the schedule rule, specify the name, comment, start time, and end time that you want to filter on your network. This page defines schedule rule names and activates the schedule for use in the Access Control page. MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client on your network to allow network access to each or copy the MAC address by selecting the name of the computer from the DHCP Client List. To enable this feature, select Enable. Next, click Apply Changes to save the settings. DMZ If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. This may be necessary if the 82 1 2 3 4 5 6 7 8 9 s e c t i o n 10 11 12 Appendixes NAT feature is causing problems with an application such as a game or video conferencing application. Use this feature on a temporary basis. The computer in the DMZ is not protected from hacker attacks. To put a computer in the DMZ, enter the last digits of its LAN IP address in the Static IP field and click Apply Changes for the change to take effect. If you have only one public (WAN) IP address, then you can leave the public IP to 0.0.0.0. If you are using multiple public (WAN) IP addresses, it is possible to select which public (WAN) IP address the DMZ host will be directed to. Type in the public (WAN) IP address you wish the DMZ host to direct to, enter the last two digits of the IP address of the DMZ host computer, and click Apply Changes. Administrator Password The Router ships with NO password entered. If you wish to add a password for more security, you can set a password from your Routers web-based user interface. Keep your password in a safe place as you will need this password if you need to log into the Router in the future. It is STRONGLY RECOMMENDED that you set a password if you plan to use the remote management feature. The login time-out option allows you to set the period of time that you can be logged into the Routers advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking Logout. Assuming the time-out is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note, only one computer can be logged into the Routers advanced setup interface at a time. Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the global Internet. The synchronized clock in the Router is used to record the security log and control client filtering. Select the time zone that you reside in. If you reside in an area that observes daylight saving time, then place a check mark in the box next to Enable Daylight Saving. The system clock may not update 83 83 Appendixes immediately. Allow at least 15 minutes for the Router to contact the time servers on the Internet and get a response. You cannot set the clock yourself. Remote Management Before you enable this function, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Routers settings from anywhere on the Internet. UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Routers firewall to be configured in a specific way to operate properly. This usually requires opening TCP and UDP ports and in some instances setting trigger ports. An application that is UPnP-compliant has the ability to communicate with the Router, basically telling the Router which way it needs the firewall configured. The Router ships with the UPnP feature disabled. If you are using any applications that are UPnP-compliant, and wish to take advantage of the UPnP features, you can enable the UPnP feature. Simply select Enable in the UPnP Enabling section of the Utilities page. Click Apply Changes to save the change. 84 1 2 3 4 5 6 7 8 9 s e c t i o n 10 11 12 Appendixes Appendix B: Important Factors for Placement and Setup Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help. 1. Wireless Router (or Access Point) Placement Place your Wireless Router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your wireless clients (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters):

Ensure that your Wireless Routers (or access points) networking antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your Wireless Router (or access point) itself is positioned vertically, point the antennas a much as possible in an upward direction. In multistory homes, place the Wireless Router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the Wireless Router (or access point) on an upper floor. Try not to place the Wireless Router (or access point) near a cordless 2.4GHz phone. 2. Avoid Obstacles and Interference Avoid placing your Wireless Router (or access point) near devices that may emit radio noise, such as microwave ovens. Dense objects that can inhibit wireless communication include:

Refrigerators Washers and/or dryers Metal cabinets Large aquariums Metallic-based UV tinted windows 85 85 Appendixes If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signals path (between your computers and Wireless Router or access point). 3. Cordless Phones If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

Try moving cordless phones away from Wireless Routers (or access points) and your wireless-enabled computers. Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturers information). If this fixes the problem, your phone may be interfering. If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Wireless Router (or access point) to channel 11. See your phones user manual for detailed instructions. If necessary, consider switching to a 900MHz or 5GHz cordless phone. 4. Choose the Quietest Channel for your Wireless Network In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities found in the Wireless LAN Utility of your wireless adapter to locate any other wireless networks that are available (see your wireless adapters manual), and move your Wireless Router (or access point) and computers to a channel as far away from other networks as possible. Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. 86 1 2 3 4 5 6 7 8 9 s e c t i o n 10 11 12 Appendixes These guidelines should allow you to cover the maximum possible area with your Wireless Router (or access point). Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

Virtual Private Network (VPN) connections, often used to connect remotely to an office network The Bring Your Own Access program from America Online

(AOL), which lets you use AOL through broadband provided by another cable or DSL service Most online banking websites Many commercial websites that require a user name and password to access your account Secure connections can be interrupted by a computers power management setting, which causes it to go to sleep. The simplest solution to avoid this is to simply reconnect by rerunning the VPN or AOL software, or by re-logging into the secure website. A second alternative is to change your computers power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting under Windows, see the Power Options item in the Control Panel. If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review the steps in the previous pages to be sure you have addressed these issues. Appendix C: Internet Connection Setting Table The table on the next page provides references to select and configure Internet connection in setting up your ADSL connection. Many ISPs use different settings depending on the region and equipment they use. You may try the setting for the ISPs in your region. If it does not work, please contact your ISP for your specific setting. 87 87 Appendixes Country Europe France Germany Holland Belgium Italy Spain Sweden UK Asia Connection Protocol VPI/VCI Encapsulation ISPs PPPoE PPPoE 1483 Bridged 8/35 1/32 0/35 0/32 0/34 LLC LLC LLC LLC LLC PPPoA 8/48 VC MUX PPPoA 0/32 VC MUX PPPoE PPPoA 8/35 8/35 LLC LLC Various T-Online, various BBNed, XS4all Versatel DHCP Baby XL, Tiscali (start/

Surf/ Family/

Live) KPN, Hetnet, HCCNet, Tiscali (lite/

Basis/Plus) Wanadoo Versatel PPP, Zonnet Various Belgacom, Tiscali, Scarlet PPPoE or PPPoA PPPoE or 1483 Bridged 1483 Bridged PPPoA 8/35 VC MUX TIN 8/32 LLC Telefonica 3/35 LLC Telia 0/38 VC MUX BT, Freeserve, Tiscali, AOL*

Australia PPPoE or PPPoA New Zealand PPPoE or PPPoA 8/35 LLC Various 0/100 VC MUX Various Singapore PPPoE 0/100 LLC SingNet, Pacific Internet 88 Information FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7633-4 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

89 89 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n Information Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Europe-European Union Notice Radio products with the CE 0682 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60950 (IEC60950) Product Safety EN 300 328 Technical requirement for radio equipment ETS 300 826 General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards). Products that contain the radio transmitter are labeled with CE 0682 or CE alert marking and may also carry the CE logo. EN 55022 (CISPR 22) Electromagnetic Interference EN 55024 (IEC61000-4-2,3,4,5,6,8,11) Electromagnetic Immunity EN 61000-3-2 (IEC610000-3-2) Power Line Harmonics EN 61000-3-3 (IEC610000) Power Line Flicker EN 60950 (IEC60950) Product Safety 90 Information Belkin Corporation Limited Lifetime Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. 1 2 3 4 5 6 7 8 9 10 11 12 s e c t i o n 91 91 ADSL Modem with High-Speed Mode Wireless G Router Designed to Meet ADSL2+ Specification Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany Tel: +49 (0) 89 143405 0 Fax: +49 (0) 89 143405 100 Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin SAS 5 Rue du Petit Robinson, 3me tage 78350 Jouy en Josas, France Tel: +33 (0) 1 34 58 14 00 Fax: +33 (0) 1 39 46 62 89 Belkin Tech Support Europe: 00 800 223 55 460 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trade-

marks of Apple Computer, Inc., registered in the U.S. and other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. 54g is a trademark of Broadcom Corporation. P74730uk