FCC ID: K7SWIZ017 BOOST CHARGE PRO 3-in-1 Wireless Charging Stand with MagSafe

DIE LAYOUT Die Line File:

IDL_WIZ017_STEAMBOAT APPLE PACKAGE Artwork File:

80 gsm wood free paper Outside View Inside View 80 gsm wood free paper Outside View Inside View 127

[5]

53.98

[2+1/8]

127

[5]

53.98

[2+1/8]

80 gsm wood free paper Outside View Inside View 80 gsm wood free paper Outside View Inside View 127

[5]

53.98

[2+1/8]

G L O B A L P A C K A G E O P E R A T I O N S INS_WIZ017tt-_8850tt01611_Rev_A00_BOOSTCHARGE_PRO_3-in-1 WirelessChargingStand_with_MagSafe WIZ017tt P#

8850tt01611 REV DESIGNER Anny DATE 01/6/22 3:22 PM VERSION X X X X X A00 01 FILE NAME SKU#

Safety Instructions:

operate this equipment. 3-in-1 Wireless Charging Stand with MagSafe Socle de charge sans fil 3 en 1 avec MagSafe Base de carga inalmbrica 3 en 1 con MagSafe REGULATORY AND SUSTAINABILITY INFORMATION INFORMATIONS RELATIVES LA RGLEMENTATION ET LA DURABILIT INSTRUCCIONES DE SEGURIDAD ADICIONALES SKU/MODEL: WIZ017 UGS / MODLE : WIZ017 NMERO DE SKU/MODELO: WIZ017 WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property. 1. Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from the source. 2. Use indoors and in a dry location only; Avoid charging near sources 3. Keep the wireless charger and power supply away from any liquids of heat and humidity. or moisture. 4. Unplug the wireless charger when not in use for long periods of time. 5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature. 6. Do not use if visible defects are observed on the wireless charger 7. Do not attempt to service, modify, or disassemble the wireless or power supply. charger or power supply. 8. Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property. 9. Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged. CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the AC socket, and contact Belkin for assistance. The marking information is located at the bottom of apparatus. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc. 555 S Aviation Blvd. Suite 180, El Segundo, CA 90245-4852, Tel: +1 (310) 751 5100, declare under our sole responsibility that the product WIZ016, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.. Innovation, Science, and Economic Development Canada Statement

(ISED):

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Innovation, Science and Economic Development Canada Statement:

This digital apparatus complies with CAN ICES-003(B) / NMB-003(B). FRANAIS Consignes de scurit MISE EN GARDE : Le non-respect de ces instructions peut provoquer un incendie, une lectrocution ou des blessures, ou endommager lutilisateur, le produit ou dautres biens. 1. Branchez ladaptateur secteur du chargeur sans fil sur une prise murale accessible et situe proximit.. 2. Utilisez le produit en intrieur seulement, dans un endroit sec, et vitez de recharger votre appareil prs dune source de chaleur ou dhumidit. 3. loignez le chargeur sans fil et ladaptateur secteur des liquides et de 4. Dbranchez le chargeur sans fil si ce dernier reste inutilis pendant lhumidit. une priode prolonge. 5. Ne rangez pas votre appareil dans des zones trs froides ou trs chaudes. Il est recommand dutiliser lappareil temprature ambiante. 6. Si vous observez des dfauts sur le chargeur sans fil ou sur ladaptateur secteur, ne les utilisez pas. 7. Nessayez pas de rparer, de modifier ou de dmonter vous-mme le chargeur sans fil ou ladaptateur secteur. 8. Lutilisation dun adaptateur secteur non recommand ou non vendu par Belkin peut augmenter le risque dincendie, de choc lectrique, de blessure ou de dommage vis--vis de lutilisateur, du produit ou de toute autre proprit. 9. La vitesse de chargement dpend de la puissance du chargeur sans fil. Elle peut varier en fonction de diffrents facteurs, notamment mais sans sy limiter, les protocoles de recharge propritaires, la temprature ambiante, le pourcentage de charge actuel de la batterie et lge de lappareil recharg. ATTENTION : Si vous rencontrez des problmes avec le chargeur sans fil, veuillez arrter de lutiliser et dbranchez ladaptateur secteur de la prise murale. Contactez ensuite Belkin pour obtenir de lassistance. Les lments de marquage se trouvent au bas de lappareil. nonc dInnovation, Sciences et Dveloppement conomique Canada (ISDE):

Ce dispositif est conforme a la norme CNR- 216 standard dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. Dclaration dexposition aux radiations :

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Dclaration dInnovation, Sciences et Dveloppement conomique Canada:

Ce peripherique numerique est conforme a la norme CAN ICES-003(B)

/ NMB-003(B). ESPAOL Instrucciones de seguridad:

AVISO: el incumplimiento de estas instrucciones podra resultar en incendios, descargas elctricas, heridas o daos al usuario, producto u otras propiedades. 1. Enchufa el adaptador de alimentacin del cargador inalmbrico en una toma de corriente que est cerca y en la que sea fcil desconectar el suministro elctrico. 2. salo en interiores y solo en lugares secos; evita cargar cerca de 3. Mantn el cargador inalmbrico y el adaptador de alimentacin lejos fuentes de calor y humedad. de lquidos y humedades. periodos largos de tiempo. 4. Desnchufa el cargador inalmbrico si no lo vas a utilizar durante 5. No almacenes el dispositivo en lugares muy calurosos o muy fros. Es recomendable usar el dispositivo a temperatura ambiente. 6. No lo uses si se observan defectos visibles en el cargador inalmbrico para coche o en el adaptador de alimentacin. 7. No intente reparar, modificar o desmontar el cargador inalmbrico o el adaptador de alimentacin. 8. Usar un adaptador de alimentacin no recomendado o vendido por Belkin puede resultar en un mayor riesgo de incendios, descargas elctricas, heridas o daos al usuario, producto u otras propiedades. 9. La potencia de la transmisin inalmbrica de electricidad es regulada por el dispositivo que recibe la carga inalmbrica y puede verse modificada por los protocolos de carga exclusivos, la temperatura ambiente, el porcentaje de batera restante y la antiguedad del dispositivo que se est cargado entre otros factores. PRECAUCIN: Si tienes problemas con tu cargador inalmbrico deja de utilizarlo inmediatamente, desnchufa el adaptador de alimentacin de la toma CA y ponte en contacto con Belkin para obtener asistencia. La informacin de marcado se encuentra ubicada en la parte inferior del equipo. Belkin International, Inc. 555 S Aviation Blvd. Suite 180, El Segundo, CA 90245-4852 Belkin Asia Pacific Ltd. Hong Kong Belkin Tech Support: www.belkin.com/support Made in Vietnam. belkin.com 8850tt01611 Rev.A00 127

[5]

53.98

[2+1/8]

127

[5]

53.98

[2+1/8]

127

[5]

53.98

[2+1/8]

PRINT SPECS:

Color Plates:

Finish:

Notes:

Business Unit:

Core Program Manager:

Andrew Camba Packaging Engineer:

Matthew Duffy Retail Outside Dimension (Including Hang Tab) L x W x D (in):

L x W x D (mm):

DIE/MATERIAL SPECS:

Material:

Please refer to drawing Blank Size (in):

70.100 x 67.914 Blank Size (mm):

1780.531 x 1725.021 This dieline works for following skus (if any):

Unit:

Side Shown:

Flute/Grain:

IN/MM PRINT SIDE horizontal Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 RELEASE DATE: 11/24/2021 DIELINE:

Intermediate THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DIE LINES, PRINTERS NOTES

Date: 1/11/2022 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC;

b) supply any and all information needed for the evaluation of the products for which certification is sought;

granted;

c) make claims regarding certification only in respect of the scope for which certification has been d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized;

e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification;

f) use certification only to indicate that products are certified in conformity with specified standards;

g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety;

h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements;

i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers;

j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements;

k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCBs or the FCCs market surveillance requirements;

l) keep a record of all complaints relating to products compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies;

m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Zack Vogel Regulatory Compliance Engineer Belkin International, Inc.

Request for Confidentiality Date: 1/11/2022 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject:

FCC ID: K7SWIZ017 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days have passed after the grant has been published and released. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Zack Vogel Regulatory Compliance Engineer Belkin International, Inc.

Power of Attorney To whom it may concern:

I, the undersigned, Jay Tu, hereby authorize the person listed below to act in behalf of me to sign all related documents for Belkin International, Inc.s FCC/IC application. Date: March 26, 2021 Name: Zack Vogel / Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 800-223-5546 E-mail: Zack.Vogel@belkin.com Name: Andrei Moldavanov / Regulatory Compliance Engineer, Regulatory Compliance E-mail: Andrei.Moldavanov@belkin.com Name: Rossi Wu / Senior Regulatory Compliance Engineer, Regulatory Compliance Tel: +1 310 633 9309 # 2960 E-mail: Rossi.Wu@belkin.com Tel: O +86 755 2387 1039 E-mail: daisy.dai@belkin.com Name: Daisy Dai / Regulatory Compliance Engineer, Regulatory Compliance Respectfully, Applicants company name: Belkin International, Inc. Applicants company address: 12045 East Waterfront Dr., Playa Vista, CA 90094, United Sates Signature Name and Job Title: Jay Tu / Manager, Regulatory Compliance E-mail: Jay.Tu@belkin.com Tel: +1 310 633 9309 # 9142