DIE LAYOUT DIE LAYOUT Die Line File:
Die Line File:
FDL_MSKU_WEMO_4 PAGE_RAHF_FCC FDL_MSKU_WEMO_4 PAGE_RAHF_FCC Artwork File:
Artwork File:
INS_WSC010_8850-01237_RevB01_Stage_FCC_Regulatory_Info REV REV 0 0 00 00 FCC - 80 gsm WOOD FREE PAPER FCC - 80 gsm WOOD FREE PAPER 1C DOUBLE SIDE PRINTED 1C DOUBLE SIDE PRINTED FRONT FRONT I N N O V A T I O N C R E A T I V E G R O U P INS_WSC010_8850-01237_RevB01_Stage_FCC_Regulatory_Info 2 170 81 WSC010 Circe P#
8850-01237 REV B01 DATE 09/23/21 11:30 AM VERSION 01 FILE NAME SKU#
DESIGNER BACK BACK Page 4 (Back) Page 4 (Back) Page 1 (Cover) Page 1 (Cover) Page 2 Page 2 Page 3 Page 3 nonc concernant lexposition aux rayonnements Cet quipement respecte les limites imposes par le Cahier des charges sur les normes radiolectriques 102 (CNR-102) dans un environnement non contrl. Mise en garde de scurit :
Lorsque vous utilisez ce produit, veuillez toujours respecter les prcautions lmentaires, notamment, mais pas seulement, celles qui suivent :
Dbranchez le priphrique avant de le nettoyer. Utilisez un chiffon sec sur lextrieur du dispositif. Afin dviter tout choc lectrique ou dendommager votre dispositif, NUTILISEZ PAS de solution liquide. Nutilisez pas ce produit prs de leau, par exemple dans un sous-sol humide ou prs dune piscine. Rangez ce produit loin des sources de chaleur, de la lumire directe du soleil, des gaz combustibles, de lhumidit, de leau ou autres liquides. Nutilisez pas ce produit si des dfauts visibles sont observs ou sil a t mouill ou endommag ou modifi. Communiquez avec le soutien la clientle de Belkin pour obtenir de laide. Vous ne devez pas dmonter, ouvrir, faire chauffer au micro-ondes, incinrer, peindre ou introduire des corps trangers dans ce produit. Nexposez pas ce produit au feu ou des tempratures leves. Lexposition au feu ou une temprature leve peut causer une explosion. Nexposez pas ce produit un choc mcanique, par exemple crasement, torsion, perforation, ou broyage. vitez de faire tomber ou de placer des objets lourds sur ce produit. Veuillez lire les instructions dutilisation et les informations ayant trait aux tempratures de fonctionnement minimales et maximales fournies avec ce produit. Pour rduire le risque de blessures, supervisez de prs toute utilisation de ce produit par des enfants, ou prs de ceux-ci. Ce produit est prvu pour tre utilis lintrieur uniquement. Toute utilisation de ce produit dune manire qui nest pas recommande dans les prsentes instructions peut entraner un risque dincendie ou de blessure. Pour plus de renseignements, rendez-vous ladresse suivante : http://www.wemo.com/support.html 411/16 411/16
[118.756]
[118.756]
FCC Compliance Statement We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, WSC010, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Innovation, Science and Economic Development (ISED) Canada Compliance Statement CAN ICES-003 (B)/NMB-003 (B) This device complies with ISEDs license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with ISED multi-transmitter product procedures. This device has been designed to operate with an antenna having a maximum gain of -2 dBi at 2.4 GHz. Antenna having a higher gain is strictly prohibited per regulations of ISED. The required antenna impedance is 50 ohms. The maximum antenna gain to comply with the EIRP limit is provided in the table below. Antenna No. Antenna Type Antenna Gain (dBi) Antenna Connector BT/Thread IFA
-2 N/A Radiation Exposure Statement:
This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. Safety Caution:
When using this product, basic precautions should always be followed, including, but not limited to, the following:
Unplug device prior to cleaning. Use dry cloth on exterior of the device. To avoid shock hazard and/or damage to device, DO NOT use any liquid solution. Do not use this product near the water, for example, in a wet basement or near a swimming pool. Keep this product away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids. Do not use this product if visible defects are observed or if it has been wet or damaged or modified. Contact the customer service support of Belkin for assistance. Do not disassemble, open, microwave, incinerate, paint, or insert foreign objects into this product. Do not expose this product to fire or high temperature. Exposure to fire or high temperature may cause explosion. Do not expose this product to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on this product. Please read the operating instructions and information on the minimum and maximum operating temperatures supplied with this product. To reduce the risk of injury, close supervision is necessary when this product is used near or by children. This product is intended for indoor use only. Use of this product in a manner not recommended in these instructions may result in a risk of injury to persons. For support, please visit: http://www.wemo.com/support.html Dclaration de conformit FCC Nous, Belkin International, Inc., sis au 12045 E. Waterfront Drive, Playa Vista, CA 90094, dclarons sous notre seule responsabilit que le produit WSC010, auquel se rfre la prsente dclaration, est conforme aux normes nonces lalina 15 de la rglementation FCC. Le fonctionnement est assujetti aux deux conditions suivantes : (1) ce dispositif ne peut pas provoquer dinterfrence nuisible, et (2) ce dispositif doit accepter toute interfrence reue, y compris des interfrences pouvant entraner un fonctionnement non dsir. Ce dispositif a t test et jug conforme aux limites imposes pour les units numriques de classe B, en vertu de lalina 15 de la rglementation FCC. Ces limites visent assurer une protection raisonnable contre les interfrences en milieu rsidentiel. Ce dispositif gnre, utilise et peut mettre de lnergie radiolectrique et sil nest pas install et utilis selon les directives, peut causer des interfrences nuisibles aux communications radio. Il nexiste toutefois aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles sur le plan de la rception radio ou tlvision, pouvant tre dtermines en mettant le dispositif sous et hors tension, lutilisateur est invit tester et corriger linterfrence en prenant une des mesures suivantes :
Rorienter ou changer la position de lantenne rceptrice. Augmenter la distance entre lquipement et le rcepteur. Brancher lquipement sur une prise de courant appartenant un circuit diffrent de celui sur lequel est branch le rcepteur. Demander lassistance du fournisseur ou dun technicien de tl ou de radio expriment. Mise en garde de la FCC : Tout changement ou toute modification non expressment approuvs par la partie responsable de la conformit, peut annuler lautorisation de lutilisateur utiliser cet appareil. Cet metteur ne doit pas tre install ou utilis de pair avec tout autre metteur ou antenne. nonc concernant lexposition aux rayonnements Cet quipement respecte les limites imposes par la FCC en matire dexposition aux rayonnements dans un environnement non contrl. Dclaration de conformit Innovation, Sciences et Dveloppement conomiques (ISDE) Canada CAN ICES-003 (B)/NMB-003 (B) Cet appareil est conforme aux normes dexemption de licence RSS dISDE. Le fonctionnement est assujetti aux deux conditions suivantes : (1) Cet appareil ne peut pas provoquer dinterfrence, et (2) cet appareil doit accepter toute interfrence, y compris celle pouvant entraner un fonctionnement non dsir. Lappareil pourrait cesser automatiquement la transmission en cas dabsence dinformation transmettre, ou de panne de fonctionnement. Il est noter que cela ne vise pas interdire la transmission de linformation de contrle ou de signalisation, ni lutilisation de codes rptitifs lorsque la technologie lexige. Cet appareil et ses antennes ne doivent pas tre installs ou utiliss de pair avec toute autre antenne ou tout autre metteur sauf conformment aux procdures de lISDE relatives aux produits plusieurs metteurs. Cet appareil a t conu pour tre utilis avec une antenne dont le gain maximum est -2 dBi 2,4 GHz. Toute antenne ayant un gain suprieur est rigoureusement interdite par les rglements de lISED. Limpdance dantenne requise est 50 ohms. Le gain dantenne maximum pour respecter la limite PIRE est indiqu dans le tableau ci-dessous. No dantenne Type dantenne Gain dantenne (dBi) Connecteur dantenne BT/Thread IFA
-2 N/A 8850-01237 Rev. B01 321/32 321/32
[92.648]
[92.648]
79/32 79/32
[185.297]
[185.297]
PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
K Finish:
Finish:
Notes:
Notes:
ALL TEXT AND GRAPHIC ELEMENTS COLOR: K, 211/32 211/32
[59.378]
[59.378]
FINISH SIZE FINISH SIZE 321/32 321/32
[92.648]
[92.648]
Unit:
Unit:
IN/MM IN/MM PRINT SIDE PRINT SIDE horizontal horizontal Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 08/29/2019 RELEASE DATE: 08/29/2019 DIELINE:
DIELINE:
Final Final Business Unit:
Business Unit:
NET-Networking NET-Networking Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Brian Byrd Brian Byrd Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
L x W x D (mm):
L x W x D (mm):
DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
80gsm Woodfree Paper 80gsm Woodfree Paper Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
7.295 x 4.675 7.295 x 4.675 185.297 x 118.756 185.297 x 118.756 This dieline works for following skus (if any):
This dieline works for following skus (if any):
THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES
.25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25".25"