* belkin. BOOST TUP Bold Wireless Charging Pad Socle de charge sans fil audacieux Base de carga inalambrica SKU/MODEL:F7U050V2 UGS / MODELE :F7U050V2 NUMERO DE SKU/MODELO: F7U050V2 Product and Warranty Information Informations sur le produit et la garantie Informaci6n del producto y de la garantia Safety Instructions:
i ae Please read these instructions before using the device to ensure safe and proper use. Connect the wall adapter of the wireless charging pad into a socket outlet that is close by and is easy to disconnect from the source. Use indoors and in a dry location only; keep away from wet or damp locations. Keep wireless charging pad and wall adapter away from any liquids or moisture. Unplug the wireless charging pad when unused for long periods of time. Do not store your device in very hot or very cold areas. It is recommended to use your device at room temperatures. Caution: If you experience problems with the wireless charging pad, please discontinue use, unplug the wall adapter of the wireless charging pad from the AC socket, and contact Belkin for assistance. 8. Do not use if visible defects are observed on the wireless charging pad or wall adapter. Do not attempt to service or disassemble. Consignes de scurit 1 Veuillez lire ces instructions avant toute utilisa-tion afin d'utiliser cet appareil de manire sire et adquate. Brancher |'adaptateur mural du socle de charge sans fil sur une prise de courant proche et facile a dbrancher de la source. Utiliser l'appareil seulement a lintrieur et dans des endroits secs; tenir loign de tout empla-cement humide ou mouill. Tenir le socle de charge sans fil et l'adaptateur mural loigns de tout liquide ou environne-ment humide. Dbrancher le socle de charge sans fil lorsqu'il n'est pas utilis pendant une priode prolonge. Ne pas entreposer votre appareil dans un endroit expos au froid intense ou 4 des tempratures leves. || est recommand d'utiliser votre appa-reil 4 temprature ambiante. Attention : Si vous rencontrez des problmes avec le socle de charge sans fil, veuillez cesser de I'utiliser, dbrancher I'adaptateur mural du socle de charge sans fil de la prise de courant et com-
muniquer avec Belkin pour obtenir de l'assis-tance. Ne pas utiliser si des dfauts visibles ont t constats sur le socle de charge sans fil ou l'adap-tateur mural. Ne pas essayer de le dmonter ou d'en faire l'entretien. ESPANOL Instrucciones de seguridad:
1. Por favor, lea estas instrucciones antes de usar el dispositivo para asegurar un uso seguro y adecuado. 2. Conecte el adaptador de pared de la base de carga inalambrica en un tomacorriente cercano en el que sea sencillo desconectar la base. 3. Usela solo en interiores y en lugares secos y sin humedad;
mantngala lejos de lugares mojados o con humedad. 4. Mantenga la base de carga inalambrica y el adaptador de pared lejos de liquidos y humedades. 5. Desconecte la base de carga inalambrica del tomacorriente cuando no la utilice durante largos periodos de tiempo. 6. No almaceneel disnositivo en areas con mucho caloro mucho frio. Se recomienda usar el dispositivo con temperatura ambiente. Precaucion: si sufre problemas con la base de carga inalambrica deje inmediatamente de usarla, desconecte el adaptador de pared de la base del tomacorriente CA y contacte con Belkin para obtener asistencia tcnica. Noutilizar si hay defectos visibles en la base de carga inalambrica o el adaptador de pared. No intente hacer al dispositivo un mantenimiento ni desarmarlo. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY belkin.com We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur is sien: tam cok alee Be ae NN a a ill ee ee BEE Se POSE PSI PPPS ECOTIG EINE E. EE LEED NMI EE ES LOMO PIGEETTE ME interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the distance between the equipment and the receiver. Connect the equipment to an outlet ona circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. IMPORTANT NOTE:
Industry Canada Statement This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B). NOTE IMPORTANTE :
Enonc dIndustrie Canada Ce dispositif est conforme a la norme CNR- 216 standard dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. HOW DOI GET HELP?
If you have a question about your product or experience a problem with it, please go to http://www. belkin.com/support or http://support. linksys.com. You will find lots of online support tools and information to help you with your product.