Wireless Multimedia Desktop 250 Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax Belkin Tech Support US: 800-223-5546, ext. 2263 310-898-1100, ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Belkin Corporation 501 West Walnut Street Compton, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Wireless Multimedia Desktop 250 Keyboard Mouse Discover easy Internet and multimedia functionality with wireless convenience User Manual User Manual F8E859-BNDL Table of Contents Table of Contents 1. Introduction .........................................................................1 Package Contents ................................................................2 Software Compatibility .........................................................2 2. Quick Setup ..........................................................................3 For PS/2 Connections ..........................................................3 For USB Connections ..........................................................4 3. Software Driver Installation ................................................5 For Windows 98 SE, 2000, Me, and XP ..............................5 4. About your Belkin Software ................................................6 Product Features ..................................................................6 For the Keyboard .................................................................6 For the Mouse ....................................................................10 Troubleshooting .................................................................13 Information ........................................................................15 5. 6. Introduction Congratulations and thank you for purchasing the Wireless Multimedia Desktop 250 by Belkin. We appreciate your business and we are sure you will enjoy years of reliable use with these high-quality input devices. Although the Wireless Multimedia Desktop 250 will function out-of-the-box as a Human Interface Device (HID) or standard PS/2 keyboard and mouse, for advanced programmability and functionality, we recommend that you use the included software. This will give you added flexibility and allow you to program and customize your settings, and reassign keys to fit your preference. 1 Introduction | Package Contents Package Contents Wireless Multimedia Keyboard Wireless 5-Button Optical Mouse USB and PS/2 Receiver PS/2 Adapter 4 AA Batteries User Manual CD Software Driver Software Compatibility Windows OS for USB interface:
Windows OS for PS/2 interface:
Windows XP, Me, 2000, 98 SE Windows XP, Me, 2000, 98 SE S e c t i o n 1 2 3 4 5 6 7 8 9 10 2 Quick Setup | For PS/2 Connections For PS/2 Connections 1. Be sure that your computer is powered off. 2. Connect the receiver to your computers PS/2 ports. The receiver has a two-headed connector for the keyboard and mouse connection (purple is for the keyboard and the USB connection, and the green adapter is for the mouse). There is also a diagram on the top connector for identification. Your computer will either have a matching color scheme or an illustration next to the port, or both (See Fig. 1). Fig. 1 3. Install the batteries into your keyboard and mouse. Please make sure you follow the diagram on the inside of the battery compartment to ensure that you install them correctly. 4. Power on your computer. The receiver automatically scans for and synchronizes the keyboard and mouse when you power on the computer. Your keyboard and mouse should now be functioning. NOTE: If synchronizing does not occur automatically, please refer to the information on Synchronizing in the Troubleshooting section at the end of this User Manual. 3 Quick Setup | For USB Connections For USB Connections 1. Be sure that your computer is powered on. If you are running Windows 98 SE, Me, or 2000, you will need to have your old keyboard and mouse connected during the installation. 2. Install the batteries into your keyboard and mouse. Please make sure you follow the diagram on the inside of the battery compartment to ensure that you install them correctly. 3. Connect only the receiver to your computer with the USB connector. (Do not connect the green PS/2 connection as it is not necessary in a USB environment) (See Fig. 2). Fig. 2 NOTE: When connecting the USB cable to your computer, Windows will start a New Hardware Wizard. Windows XP completes the Wizard automatically. In Windows 98 SE, Me, and 2000, you will need to go through the New Hardware Wizard setup with your old keyboard and mouse. Windows 98 SE may require you to insert your Windows 98 SE Installation CD into your computers CD-ROM drive to complete the install. 4. The receiver automatically scans and synchronizes the keyboard and mouse. Your keyboard and mouse should now be functioning. 5. If synchronizing does not occur automatically, please refer to the information on Synchronizing in the Troubleshooting section at the end of this User Manual. S e c t i o n 1 2 3 4 5 6 7 8 9 10 4 Software Driver Installation For Windows 98 SE, Me, 2000, and XP NOTE: The keyboard and mouse should now be functioning for basic input. If this is not the case, carefully repeat the Quick Setup procedures in the previous pages. When the keyboard and mouse are functioning for basic input, install the software described in the following section. NOTE: If you have previously installed any keyboard or mouse driver on your computer, you must uninstall it/them before proceeding with this installation procedure. 1. Insert your Wireless Multimedia Desktop 250 driver installation CD into your CD-ROM drive. After a few moments, the main menu will start automatically. 2. Select Install Driver and your computer will begin the installation process. 3. Follow the on-screen instructions to install the software. NOTE: If the main CD does not auto-start, click the Start button and select Run. From the run dialog box, enter
<drive>:\Setup.exe and click OK (<drive> being the letter of the drive that identifies your CD-ROM drive under My Computer. For example, if the CD is in drive D, enter D:\Setup.exe.). 4. When prompted, click Finish and restart your computer. This completes the installation process. 5 About your Belkin Software | Product Features Product Features The Wireless Multimedia Desktop 250 software provides a suite of tools that will enhance your experience with the Belkin Wireless Multimedia Desktop 250. It allows you to customize your hot keys and gives you quick access to your media keys, as well as other shortcuts. For the Keyboard Software installation is required to enable functioning of the following USB-PS/2 keyboard hot keys:
Mute Stop Mutes your system volume. In Windows Media Player, stops music. Play/Pause In Windows Media Player, starts or pauses music. Back Forward Volume Up/Down In Windows Media Player, moves you back one track or to the beginning of the current track. In Windows Media Player, moves selection forward one track. Adjusts the main volume of your computer. NOTE: Your Media Player may have a separate volume control. Media Search Opens your default Media Player for music only. Enables web search. Refresh Reloads the current web page. Stop Back Stops page from loading. Moves Internet page back. S e c t i o n 1 2 3 4 5 6 7 8 9 10 6 About your Belkin Software | For the Keyboard Forward Moves Internet page forward. My Documents Opens your My Documents folder. Home Opens your systems default Internet browser. Email*
Opens your default email program, such as Microsoft Exchange or Outlook. Calculator Opens your Widows system calculator. Computer Opens up My Computer. Sleep Battery Puts computer into sleep mode. LED lights up when batteries are low.
*NOTE: If you have a web-based email account, this feature does not apply. To program keyboard hot keys:
1. Click Start. 2. Click Programs. 3. Click Belkin Multimedia Keyboard. 4. Then double-click on Belkin Multimedia Utility Keyboard. 5. An on-screen display of the hot keys will appear. Select the button to program. 6. Then under the Keys tab, select Special Function. 7. In the drop-down menu, select from:
Copy Cut Paste Redo Open Save New 7 About your Belkin Software | For the Keyboard 8. Then click Apply. 9. Next, click OK. 10. Repeat steps 59 to program other hot keys. To restore default settings, click Restore All. To program a customized hot key:
1. Follow steps 15 in To program keyboard hot keys. 2. Select Custom. 3. Then click Set. 4. Follow on-screen instructions to complete programming. 5. Click Apply. 6. Then click OK. To customize on-screen color display:
1. Select OSD tab. 2. 3. Then in Color, click drop-down menu to select color. In Item, select from (Window, Frame, Text) to program. To customize display launch time:
1. Select OSD tab. 2. In Delay, click drop-down arrow. 3. Then select from (1-10) seconds. 4. Click Apply. 5. Next, click OK. S e c t i o n 1 2 3 4 5 6 7 8 9 10 8 About your Belkin Software | For the Keyboard To display key status:
1. To display status of Scroll Lock, select Show Scroll Lock status. 2. To display status of Num Lock, select Show Num Lock status. 3. To display status of Cap lock key, select Show Cap Lock status. 4. After selection(s) are completed, click Apply. 5. Next, click OK To remove key status, uncheck all selections. Then click Apply. Next, click OK. 9 About your Belkin Software | For the Mouse For the Mouse Mouse Functions Through your Mouse Properties dialog box, you can find and control the following button-function features:
Right Button Context menu Wheel Button Quick/auto scroll. Wheel button lights up red when batteries are low. Left Button Primary mouse button Fourth Button Internet Explorer back (if available) Fifth Button Internet Explorer forward
(if available) Fig. 3 S e c t i o n 1 2 3 4 5 6 7 8 9 10 10 About your Belkin Software | For the Mouse To program mouse buttons:
Please note that only the scroll wheel, fourth, and fifth buttons are programmable through the software. Refer to Fig. 3 of mouse for description. 1. Click Start. 2. Click Programs 3. Click Belkin Multimedia Keyboard. 4. Then double-click on Belkin Multimedia Utility Mouse. 5. Next double-click on the mouse icon on the task bar. To program wheel speed:
1. Under the Wheel tab in wheel mode, select Enhanced scroll mode. 2. Under Wheel speed in drop-down menu, select a number for scroll lines per scroll unit or select one page per scroll unit. 3. Click Apply. 4. Click OK. To program mouse buttons:
1. Select the Button tab. 2. Select a button to program. 3. Choose from the following functions in Table 1. 11 About your Belkin Software | For the Mouse Table 1 System Default Cut Minimize Window F1 F10 Esc Copy Paste Drag Lock Shift Lock Backspace Internet Explorer Control Lock Find Computer Horizontal Wheel Find File System Help Middle Button Minimize All Windows Run Start Menu Launch Default Browser Launch Default Email Internet Explorer Backward Internet Explorer Forward System Property Universal Scroll Auto Scroll Universal Zoom Connect to Internet Undo Minimize all Windows Control Panel Close Application Double-Click Maximize Window Enter Space Delete Page Up Page Down Tab Home End Up Down Left Right Undo Redo 4. Click Apply. 5. Click OK. S e c t i o n 1 2 3 4 5 6 7 8 9 10 12 Troubleshooting Synchronizing the Receiver and Wireless Multimedia Desktop 250 1. Press the connect button on top of the receiver, and then press the button on the bottom of the keyboard. It should connect within 10 seconds. 2. Press the connect button on the top of the receiver, and then press the button on the bottom of the mouse. Within 10 seconds, it should connect. 3. If the keyboard did not connect, please repeat step 1. 4. If the mouse did not connect, please repeat step 2. Switching IDs If interference occurs while using the keyboard and/or mouse, switch IDs by following the steps below:
For the Keyboard:
Press the connect button on top of the receiver, and then press the button on the bottom of the keyboard. It should connect within 10 seconds. If the keyboard does not connect, please repeat step. 13 Troubleshooting For the Mouse:
Press the connect button on the top of the receiver, and then press the button on the bottom of the mouse. Within 10 seconds, it should connect. If the mouse does not connect the first time, please repeat. If the keyboard and/or mouse is/are not working after installation:
Be sure the receivers cables are plugged into either the computers PS/2 ports or a USB port. If you are connecting it via PS/2, make sure that both plugs are being used (purple keyboard connector and the USB connection with the green PS/2 adapter). If you are connecting via USB, make sure that you only connect the USB connector. For optimal performance Place the receiver at least eight inches (20cm) away from the computer monitor, the computer, any external storage devices, or other electrical devices. Make sure you have properly installed the batteries. Check to make sure the batteries you have installed are not dead (you can do this by installing them into another device). If the keyboard does not register keystrokes, replace current batteries with high-quality alkaline batteries. If the mouse pointer becomes choppy on-screen, replace current batteries with high-quality alkaline batteries. Be sure that the mouse is not on a reflecting surface (such as a transparent, mirrored, or glossy table). If this is the case, place an opaque or textured materialor a mouse padunderneath the mouse. This will allow the optical mechanism to work accurately. S e c t i o n 1 2 3 4 5 6 7 8 9 10 14 Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F8E859-BNDL to which this declaration relates, Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15 Information Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Belkin Corporation Limited Lifetime Product Warranty*
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
*Batteries not included under warranty. S e c t i o n 1 2 3 4 5 6 7 8 9 10 16