FCC ID: 2BCYB-0003743 NAIL DRILL

Description:

Wireless charger for smartphones under the Ql-standard. Easy to charge your phone without cables, just put your phone on the charging plate. Specifications:

Input: According to the printing on the back of the charging plate. Input: DC5V-2A Output: DC5V-1A Working Frequency: 110KHZ-220KHZ Operating Temperature Range: -0~45C Storage Temperature Range: -10 ~50C Storage Humidity: 45% ~ 85% RH Compatible with the Ql-standard. Package contents:

Wireless charging plate Adapter or Power cable Power supply:

The charger is recommended to power by a qualified AC adapter. Operation:

Connect the wireless charger to an outlet such as a qualified AC adapter, then a Led light is lit. Put your phone on the charging plate and the battery starts to charge, the Ledlight blinks during charging. If the phone dessn't start to charge,please try to reposition it. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user 's authority to operate the equipment. Refer to KDB 784748 Anner A section A.5:

(a) Max. Electric Field Emissions: 6 .06V/m Max. Magnetic Field Emissions : 0.54A/m

(b) The maintenance of the system is the responsibility of the manufacturer.

(c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible. FCC ID: 2BCYB-0003743

Reference No.: WTF23X08181041W001/002 Page 1 of 9 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2BCYB-0003743 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

BELMAX LIMITED B403.235#,LIGUANG RD,LISHUI TOWN, FOSHAN,GUANGDONG 528000, CHINA Date: 2023-10-07 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref:

Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BCYB-0003743 To Whom It May Concern:

BELMAX LIMITED certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Jack Luo, Sales manager]

BELMAX LIMITED B403.235#,LIGUANG RD,LISHUI TOWN, FOSHAN,GUANGDONG 528000, CHINA Date: 2023-10-07 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref:

Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BCYB-0003743 To Whom It May Concern:

BELMAX LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Jack Luo, Sales manager]

BELMAX LIMITED B403.235#,LIGUANG RD,LISHUI TOWN, FOSHAN,GUANGDONG 528000, CHINA Date: 2023-10-07 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BCYB-0003743 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Jack Luo, Sales manager]

BELMAX LIMITED B403.235#,LIGUANG RD,LISHUI TOWN, FOSHAN,GUANGDONG 528000, CHINA Date: 2023-10-07 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BCYB-0003743 POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, BELMAX LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Jack Luo, Sales manager]