FCC ID:QL4M6 Live life in the passing lane. Arrows indicate direction of the threat. GT-360 360 Protection with Threat Direction Dual Antenna Front
& Rear Protection GPS Intelligence Rejects False Alerts ESCORT Live Crowd Sourced Alerts Lightning Fast Response Quick Reference Congratulations GT-360 Features GT-360s HD Performance accurately identifies real threats sooner than other detectors, and with threat direction arrows, provides you with location information about these threats. Updatable IVT Filter automatically reduces false alerts from moving In-Vehicle Technology sources such as collision avoidance systems and adaptive cruise control. GPS location-based intelligence automatically locks out false alerts and allows you to mark locations for future reference. Access to the DEFENDER Database, which warns you of verified speed traps, speed cameras, and red light cameras. Built in Bluetooth technology gives you access to ESCORTs award winning app, ESCORT Live. The exclusive real-time ticket-protection network which warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for over-speed alerts. ke the freedom of the road back with the Take the freedom of the road back with the Beltronics GT-360, equipped with 360 high definition protection, threat direction arrows, and intelligent GPS technology to eliminate false alerts. Go to Beltronics.com for full featured Owners Manual. GT-360 features a new multi-color OLED display. Brilliant graphics illuminate intuitive icons that identify the type of threat at a glance. H I G H D E F I N I T I O N 3 6 0 P R O T E C T I O N 2 Registration and ESCORT Live Before downloading ESCORT Live, you must first register your device. Be sure to have your device nearby, as you will need its serial number. 1 Visit www.Beltronics.com and click Product Registration. 2 Click the Registration for all devices link. 3 Follow the onscreen instructions to register your device. Be sure to write down the username and password you create, as you will need this information to access and download ESCORT Live. (You will also receive an e-mail with this information, once you have registered your device.) For iPhone:
1 Ensure GT-360 power is ON 2 Open the App Store on your iPhone and search for ESCORT Live Radar. 3 Follow the onscreen instructions to download ESCORT Live Radar and then open the app. 4 When prompted, enter the username and password you created when registering your product at Beltronics.com. 5 Press the Settings button then select Devices. 6 You should see GT-360 underneath. entry and when prompted select Pair. 7 The Bluetooth icon on the GT-360 display will appear to confirm that it is paired to your iPhone. listed with Not Connected Press the GT-360 device For Android based smartphones:
1 Ensure GT-360 power is ON. 2 On your smartphone go to Bluetooth Settings and make sure that Bluetooth is ON. 3 Press Scan for devices and wait for the device under Available devices. list to populate, GT-360 should appear 4 Press the GT-360 device entry. 5 The Bluetooth icon on the GT-360 display will appear to confirm that it is paired to your smartphone. 6 Open Google Play on your smartphone and search for Escort Live Radar. 7 Follow the onscreen instructions to download Escort Live Radar and then open the app. 8 When prompted, enter the username and password you created when registering your product at Beltronics.com. 7 Open the app, walk through the tutorial, and youre ready to hit the road!
3 Installation Your new detector comes with the revolutionary EZ Mag Mount. Simply tilt the display end of the detector up and slide it onto the mounting bracket. The magnetic mount holds the detector in place. To remove the detector from the mount, simply lift the display end of the detector and the detector releases from the mount. Mounting Tips:
Center of windshield between driver and passenger. Ensure clear view of road ahead and sky above. Avoid windshield wipers and heavily tinted areas. To mount the detector in your vehicle:
1 Remove paper backing from EZ Mag Mount `
StickyCup. 2 Ensure the locking clamp is open. 3 Firmly press EZ Mag Mount StickyCup onto windshield and close the locking clamp to secure. 4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure. 5 Tilt the display end of the detector slightly upward and engage with the flanged edge of the mounting bracket. The EZ Mag Mount magnet holds the detector in place. 6 To remove the detector, simply lift the display end of the detector upward. The detector will release from the mount. 7 To remove mount from windshield, release locking clamp and pull tab on top of StickyCup. EZ Mag Mount Care Instructions:
Should the EZ Mag Mount StickyCup accumulate debris and lose its stickiness, simply rinse under warm water, gently wipe off debris and allow to air dry. EZ Mag Mount 4 Release Tab StickyCup Locking Clamp (closed) Thumb Wheel For Angle Adjustment Mounting Bracket GT-360 Controls & Features Using GT-360 1 Plug small end of SmartCord USB into modular jack on GT-360 and large end of SmartCord USB into your vehicles lighter/accessory socket 2 GT-360 should power on automatically. If not, press the devices power button. Power requirement 11.0-16.0 Volts DC negative ground 400mA standby, 700 mA maximum NOTE: You can easily access and customize all of your Settings and Preferences by pressing and holding the BRT and SEN buttons. See Settings and Preferences for details.
- Press to mute the audio for a specific alert.
- Press three times to lock out a false alert.
- Press twice while receiving a locked-out alert to unlock.
- When connected to ESCORT Live press and hold mute button on unit or cord to manually report to other users a verified X or K-band alert, or a police officer observing traffic. Using SmartCord USB Mute Button:
Alert Light: Blinks red when receiving a radar or Power Light: Lights green when device is powered on. USB Charging Port: Charge smartphones, tablets and other USB-charged Devices. laser alert. Modular Jack Connects to SmartCord for powering your device Earphone Jack Connects to optional 3.5 mm stereo earphone. Modular Connector Plugs into detector jack SmartCord USB Adapter Connects to lighter/accessory socket 5 MRK To mark a location for future alerts, press MRK twice, then VOL + or to select the type of marker, then MRK again to confirm. Press twice while receiving marker alert to unmark Volume Press and hold + or to adjust volume Mount Area The EZ Mag Mount attaches to device here BRT Press to adjust display brightness (Min, Med, Max, Auto, Dark) SEN Press to adjust detector sensitivity
(Auto, AutoNoX, AutoLoK, and Highway) Display Alert area Display Showing current speed Display (OSP) OverSpeed alert setting that can be adjusted in Preferences. Bluetooth icon will appear on display screen blue when paired to phone and Speed limit data will show here when ESCORT Live App is open. Power Press to turn GT-360 on or off MUTE Press to mute an alert;
press three times to lock out a false alert; press twice while receiving a locked-out alert to unlock OverSpeed Alert OverSpeed Alert Bluetooth Bluetooth Speed Limit Data Speed Limit Data 6 Continued Programming Press and hold the BRT and SEN buttons to access Programming. To exit Programming, simply wait a few seconds without pressing a button. The unit will display Completed to confirm your selections. Press VOLUME + or to change your setting within a category Press BRT to go from one category to the next User Mode Advanced*
Novice Pilot Scan Bar*
Full Word Access and customize all Settings and Preferences Access and customize units and display color, (all other Settings are set to factory defaults) NOTE: Switch back to Advance mode to view all Preferences Scanning Bar with Full Word Full Word: AutoScan, Auto NoX, or Highway Display Color Copper*/Blue/Green/Red Set color to match your vehicles dash display Speed Display On*
Off Displays current speed Displays battery voltage Cruise Alert Over Speed Meter Mode Off / 20-160 mph 20 mph*
Off / 20-160 mph 70 mph*
Standard*
Tech Basic Tones Standard*
Mild Offers double beep alert tones below specified speed Reminds you when you exceed a specified speed Single band with front and rear signal strength bar graphs Single band with numeric frequency and front and rear signal strength bar graphs Simple messages replace bands:
Caution (if traveling below cruise alert limit) Slow Down (if traveling above cruise alert limit) Standard Beltronics alert tones Mild doorbell chime alert tones AutoMute Low/Med*/High/Off Automatically reduces audio to preferred volume during alert AutoLock On* / Off Automatically stores and locks out false alarms Units English*/Metric Units for distance and speed Language English*/Espanol Language for voice and text Voice On* / Off GPS Filter On* / Off Voice announcements Enables GPS-powered features 7 AutoPower Off 1 Hour 2 Hours 4 Hours*
8 Hours Power turns on or off depending on your vehicles ignition type (constant power or switched) Powers off automatically after 1 hour Powers off automatically after 2 hours Powers off automatically after 4 hours Powers off automatically after 8 hours NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes without moving. NOTE:
AutoPower only works with constant power ignition Band Enables Press SEN to go from one band category to the next Default*
Modified Default Settings Band Enables have been modified from their default settings Press VOLUME + or to change your setting within a category Freq: 24.050-24.250 GHz NOTE: When K Band is off, you can select separate segments of the band to turn on or off. Freq: 24.050 - 24.110 GHz Freq: 24.110 - 24.175 GHz Freq: 24.175 - 24.250 GHz Freq: 23.950 - 24.050 GHz Freq: 33.400-36.000 GHz NOTE: When Ka Band is off, you can select separate segments of the band to turn on or off. Freq: 33.400 - 33.700 GHz Freq: 33.700 - 33.900 GHz Freq: 33.900 - 34.200 GHz Freq: 34.200 - 34.600 GHz Freq: 34.600 - 34.800 GHz KaN6 On / Off* Freq: 34.800 - 35.160 GHz KaN7 On / Off* Freq: 35.160 - 35.400 GHz KaN8 On* / Off Freq: 35.400 - 35.600 GHz KaN9 On / Off* Freq: 35.600 - 35.840 GHz KaN10 On / Off* Freq: 35.840 - 36.000 GHz On* / Off On* / Off On* / Off On* / Off On* / Off On / Off*
On* / Off On / Off*
On / Off*
On* / Off On* / Off On* / Off On* / Off On / Off*
On* / Off On* / Off X Band K Band KN1 KN2 KN3 KN4 Ka Band KaN1 KaN2 KaN3 KaN4 KaN5 Ka Band Ka-POP Laser TSR Automatically rejects traffic flow sensors-monitoring false alarms Marker Enable On* / Off Default Settings Modified Marker Enables have been modified from their default settings 8 Press SEN to go from one marker category to the next
*Default Setting Other Redlight Red & Speed Speed Cam Air Patrol Speed Trap Air Patrol On* / Off On* / Off On* / Off On* / Off On / Off*
On* / Off On / Off*
Clear Locations Marked Lockouts Defender Format Press VOLUME + or to change your setting within a category Other location Red light camera Red light & speed camera Speed camera Known aircraft patrolled areas NOTE: User cannot mark an air patrol location Speed trap Known aircraft patroled areas NOTE: User cannot mark an Air Patrol location Clear all user Marked locations. Press SEN button to confirm Clear all lockouts. Press SEN button to confirm Clear all DEFENDER data. Press SEN button to confirm Clear DEFENDER database, all markers, and all lockouts. Press SEN button to confirm 9 Notes for Programming For descriptions of features and functions available when connected to ESCORT Live, visit Beltronics.com and download the GT-360 Owners Manual. To view serial number and software revision press MRK and MUTE while powering on detector. To restore GT-360 to its original factory Settings, press and hold MRK and BRT while turning the power on. A Restored message will display, acknowledging the reset. Software Updates GT-360s red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools. In order to have access to these updates, you must register your GT-360 at www.Beltronics. com. Once registered, you will receive email notifications that updates are now available for your database or firmware. To handle your software and DEFENDER updates you need to connect your GT-360 to a computer first. You can connect GT-360 to a computer via USB/USB Mini B cable. AW-1220061-1A Artwork QFG BEL GT-360 rev A 10 Contact Us 866.468.0322 Beltronics.com Beltronics USA, Inc. 5442 West Chester Road, West Chester OH 45069 Beltronics One Year Limited Warranty What this warranty covers: Beltronics USA, Inc. (Beltronics) warrants your Product against all defects in materials and workmanship. For how long: One (1) year from the date of original purchase from an authorized Beltronics dealer. What we will do: If a breach of warranty occurs, Beltronics, at its discretion, will either repair or replace your Product free of charge. What we will not do: Beltronics will not pay shipping charges that you incur for sending your Product to us. What you must do to maintain this warranty: Show original proof of purchase or receipt from an authorized Beltronics dealer. Warranty exclusions: This warranty does not apply to your product under any of the following conditions: 1. The serial number has been removed or modified. 2. Your product has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your product has been modified in any way. 4. Your receipt or proof-of-purchase is from a non-authorized dealer or internet auction site, including E-bay, U-bid, or other non-authorized resellers. 5. You are not the original purchaser of the Product from an authorized dealer or did not receive it as a gift from the original purchaser of the Product from an authorized dealer. To obtain service: 1. Contact Beltronics (1-800-341-2288) to obtain a Return Authorization Number. 2. Properly pack your Product and include: your name, complete return address, written description of the problem with your Product, daytime telephone number, and a copy of the original proof of purchase or receipt. 3. Label the outside of the package clearly with your Return Authorization Number. Ship the Product pre-paid (insured, for your protection) to: Beltronics USA, Inc., 5442 West Chester Rd., West Chester, OH 45069. LIMITATION OF WARRANTY: The obligations set forth above are Beltronics sole obligations and your exclusive remedy. Beltronics makes no other express warranty. Any implied warranty of merchantability or fitness for a particular purpose that may be applicable to the Product is limited in duration to the duration of this warranty. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. BELTRONICS SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE PRODUCT. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Beltronics is not responsible for products lost in shipment between the owner and our service center. Other legal rights: This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. 2018 Beltronics USA, Inc. Beltronics, GT-360, Escort Live!, Defender, TrueLock, SmartShield, SpecDisplay, AutoSensitivity and EZ Mag Mount are trademarks of Beltronics USA, Inc. Manufactured in the Philippines. Features, specifications and prices subject to change without notice. FCC NOTE: Modifications not expressly approved by the manufacturer could void the users FCC granted authority to operate the equipment. FCC ID:QL4M6. CONTAINS FCC ID:QKLBT2 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received including interference that may cause undesired operation. Ecn 1180110