FCC ID: 2BBHY-N200 N200-I-SDWAN-EDGE

Nirad Networks a Benison Product User Guide N200-I-SDWAN EDGE Indoor EDGE Router User Guide N200-I-SDWAN-EDGE Chapter 1: About the Router I. The Router provides latest generate connectivity to wired and wireless products anywhere you want. II. III. It is extremely useful during disaster to provide connectivity for relief teams and to public for internet connectivity. With its one-touch setup, this router can be deployed and start working in minutes. Being cloud managed, the router can be managed from anywhere in the world. 1 Chapter 2: Installing and configuring your router. User Guide N200-I-SDWAN-EDGE 1. Mounting and placement of the Router:

1.1. Since the router is working on mobile networks and broadcasts wireless network for the devices to connect, significant consideration should be given to its mounting and placement since the wireless signal strength and coverage vary depending on the actual environment where your router is in. Many obstacles may limit the range of the wireless signal, for example, concrete structures, thickness, and number of walls. 1.2. Mounting the router on a pole and with a clean LOS is always advisable. 2. To Configure the router, you would need:

2.1. PC with an active Ethernet adapter and Ethernet cable. 2.2. Web Browser (Edge, Chrome, Firefox, Opera etc) 2.3. Microsoft .NET Framework 4 and above. 2 User Guide N200-I-SDWAN-EDGE 3. How to log into the router:

3.1. Open a browser and type in the Default IP: 192.168.99.1 3.2. Username = admin; Password = admin;

You might get a warning for certificate. Please refer this link to surpass it and access the username and password prompt. 4. Once logged in, you would be at the Status page. This page gives a glance of various vital information about the router including Hostname, Model, Current Firmware Version, Uptime, Local Time, IP Address assigned to the sim (if sim is inserted), active DHCP Leases, Wireless status and the MWAN interface status (if its active or inactive) 3 Chapter 3: Various tabs and nested options in the Router LuCI Interface. User Guide N200-I-SDWAN-EDGE 3.1 Status 3.1.2 Firewall:

3.1.3 Routes:

3.1.4 System Log 3.1.5 Kernel Log 3.1.6 Processes 3.1.1 Overview:

This is the default page that gives you a birds eye view of the routers firmware, model number, uptime, IP assigned, memory etc. Nothing on this page is editable. This page provides you information about the Firewall rules and zones

(IPv4 and IPv6) that are configured. Here you can see the total packets counts, traffic, target, protocol used etc. None of the field on this page is editable. As the name suggests, you can see the details about the various routes configured/existing on the router. Again, this would display information about the IPv4 and IPv6 Routes. This tab shows the output of logs that are generated in the router including Kernel logs, services, and applications.

This tab shows information about the kernel and its kernel modules. Since the kernel buffer is low, this shows only the recent data

Gives an overview of currently running system processes in real-time with their status. 4 User Guide N200-I-SDWAN-EDGE 3.1.7 Realtime Graphs (RTG) 3.1.8 Load Balancing 3.2 System

This tab shows the information about the Load, Traffic, Wireless and Connection in graphical format. This is a real-time graph that keeps on updating itself periodically. This tab shows the output of the MWAN interfaces that are active/inactive and disabled. Additional options that are available are as follows:

In this tab gives you can configure the basic aspects of your device like the Hostname, DHCP Settings, Logging, Language, Preferred Time-

Zone etc 5 User Guide N200-I-SDWAN-EDGE 3.2.1 Software 3.2.2 Startup:

3.2.3 Scheduled Tasks:

This option shows you the list of packages that are installed on the router. Here, you can download and install additional packages on the router that you need. You can also update the existing packages, if available. Once again, please be cautious while installing the packages. Initscripts: This option allows you to specify scripts and/or job to be run/stop during startup. Since this is an advanced option, it is advisible to make changes only if you are aware of the results. Local Startup: You can specify any commands that you need to execute AFTER the boot process. This is the GUI option for system crontab. Hence you can specify any job to be run at any specified time here. 6 3.2.4 LED Configurations:

3.2.5 Backup/Flash Firmware:

User Guide N200-I-SDWAN-EDGE This option

allows to customize the behaviour of the devices LEDs based on triggers and the interfaces. If needed, you can add additional LED Action.

This option has the following options:

Actions: This tab give you the access to various options on how to perform a Backup, Restore and your existing configuration. Backup: Once you click on Generate archive it creates a tar.gz file of all the important files in the router to be saved. Reset to defaults: to perform a factory reset. Restore: To upload the files that were saved from the Backup option. Save mtdblock contents: This option allows to download specific MTD (Memory Technology Devices). You have the options to download all the available mtdblock. (This is a more advanced feature of the router) Flash new Firmware image: this option allows you to upload new firmware images on the router. These firmware images are released solely by Nirad networks and should be used cautiously, otherwise it could break the router if incorrect image is uploaded to the router. Configurations: In this tab, you can specify any other file you wish to preserve along with the existing list of files. Click on Save to save it. 3.2.6 Reboot: You can reboot the router using this option 7 User Guide N200-I-SDWAN-EDGE 3.3 Nirad

This tab allows to configure the device to communicate to the Nirad Cloud Server. You can specify the following parameters for establishing a successfully communication with the Nirad Cloud for managing the device through cloud. Operating Mode: You can choose from either:

o Routed Mode: Choose this option for the device to work in routed mode, working as a router. o Bridged Mode: For running this device in bridge mode, acting as All the settings below this option, if chosen, would be disabled. Ethernet Wan Configuration: You can choose the type of WAN configuration you have. You can choose to have either:

o DHCP: Choose this option when you do not have any of the protocol to choose from (PPPoE or Static IP address) o PPPoE: Choose this if your internet connection uses the PPPoE protocol. You would have to enter the username and password for authentication. o Static: Provide the static IP assigned to your connection with the Subnet and Gateway for successful communication. 8 User Guide N200-I-SDWAN-EDGE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 9

Label Location Size:50*20mm FCC ID: 2BBHY-N200 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Benison Technologies Pvt Ltd Section 2.911(d)(5)(i) Certification EquipmentType Company name: Benison Technologies Pvt Ltd Address: Akshay Tech Park, Unit No. 102, First Floor, Plot No. 72 & 73 EPIP area, Hoodi Village, Whitefield,Bangalore,Karnataka,India. Product Name: N200-I-SDWAN-EDGE FCCID: 2BBHY-N200 Model(s): N200-I-SDWAN-EDGE ,N200-I-LBV2,N200-I-EDGE,N200-I,N100-I-SDWAN-EDGE, N100-I, N100-O, N200-O & N200-O-SDWAN-EDGE 2.911(d)(5)(i) EquipmentType We, [Benison Technologies Pvt Ltd] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered ListNOTE 1 Yours sincerely, Name: Suyog Wagh Date: 2023/06/01 Title and Company name: Business Development Manager / Benison Technologies Pvt Ltd NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Benison Technologies Pvt Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Benison Technologies Pvt Ltd Address: Akshay Tech Park, Unit No. 102, First Floor, Plot No. 72 & 73 EPIP area, Hoodi Village, Whitefield,Bangalore,Karnataka,India. Product Name: N200-I-SDWAN-EDGE FCCID: 2BBHY-N200 Model(s): N200-I-SDWAN-EDGE ,N200-I-LBV2,N200-I-EDGE,N200-I,N100-I-SDWAN-EDGE, N100-I, N100-O, N200-O & N200-O-SDWAN-EDGE 2.911(d)(5)(ii) Applicant filing We, [Benison Technologies Pvt Ltd] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1on the Covered ListNOTE 2,established pursuant to 1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Suyog Wagh Date: 2023/06/01 Title and Company name: Business Development Manager / Benison Technologies Pvt Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Benison Technologies Pvt Ltd U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Benison Tech USA Inc. FRN: 0030032858 Contact Name: Ajay Virginkar Address: 2225 E Bayshore Road, Suite 200, Palo Alto, California United States,94303 Telephone No: 510 435 5214 Email: ajay@niradnetworks.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: 2023-06-01 Signed by (Printed Name/Title): Ajay Virginkar / manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Benison Technologies Pvt Ltd FCC ID: 2BBHY-N200 Contact Name: Suyog Wagh Address: Akshay Tech Park, Unit No. 102, First Floor, Plot No. 72 & 73 EPIP area, Hoodi Village, Whitefield,Bangalore,Karnataka,India. Telephone No: +91 9561924893 Email: suyog@niradnetworks.com Applicant Signature:

Date: 2023-06-01 Signed by (Printed Name/Title): Suyog Wagh / Business Development Manager

Benison Technologies Pvt Ltd Authorization Company: Benison Technologies Pvt Ltd Address: Akshay Tech Park, Unit No. 102, First Floor, Plot No. 72 & 73 EPIP area, Hoodi Village, Whitefield,Bangalore,Karnataka,India. Product Name: N200-I-SDWAN-EDGE Model Number(s): N200-I-SDWAN-EDGE ,N200-I-LBV2,N200-I-EDGE,N200-I,N100-I-

SDWAN-EDGE, N100-I, N100-O, N200-O & N200-O-SDWAN-EDGE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Suyog Wagh Title:

Business Development Manager Company: Benison Technologies Pvt Ltd Date: 2023/06/01

Benison Technologies Pvt Ltd FCC Software Configuration Control Declaration Date: June 6, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. FCC ID: 2BBHY-N200 Product Name: N200-I-SDWAN-EDGE Model Number(s): N200-I-SDWAN-EDGE ,N200-I-LBV2,N200-I-EDGE,N200-I,N100-I-

SDWAN-EDGE, N100-I, N100-O, N200-O & N200-O-SDWAN-EDGE Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Suyog Wagh Date: 2023/06/01 Title and Company name:

Business Development Manager / Benison Technologies Pvt Ltd FCC Software Configuration Control Declaration Rev1.1

Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; The difference is only in model names. FCC ID: 2BBHY-N200 Production name Trade name Model no. N200-I-SDWAN-EDGE N/A N200-I-SDWAN-EDGE ,N200-I-LBV2,N200-I-

EDGE,N200-I,N100-I-SDWAN-EDGE, N100-I, N100-O, N200-O & N200-O-SDWAN-EDGE Confirmed byBenison Technologies Pvt Ltd Signature

Name:

Suyog Wagh Title:

Business Development Manager Company: Benison Technologies Pvt Ltd Date: 2023/06/01

Benison Technologies Pvt Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BBHY-N200 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2023/06/01 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Security Requirements for UNII devices Rev 2.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 dayspursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Suyog Wagh Title: Business Development Manager Company name: Benison Technologies Pvt Ltd