FCC ID: JVPWDC20TH InstaShow S Button

InstaShow S User Manual WDC20 V 1.00 Copyright Copyright 2019 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. This user manual aims to provide the most updated and accurate information to customers, and thus all contents may be modified from time to time without prior notice. Please visit www.benq.com for the latest version of this manual. The illustrations and the images in this guide are for your reference. BenQ ecoFACTS BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the Bringing Enjoyment 'N Quality to Life corporate vision with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-

friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase. Check out BenQ's CSR Website at http://csr.BenQ.com/ for more details on BenQ's environmental commitments and achievements. RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. This symbol indicates DC voltage 1 Table of contents Copyright ......................................................................................................................................1 Disclaimer .....................................................................................................................................1 BenQ ecoFACTS .........................................................................................................................1 Introduction ..................................................................................................................................3 Product features .............................................................................................................................................. 3 Package content ............................................................................................................................................... 4 Product specification ....................................................................................................................................... 5 Overview ........................................................................................................................................................... 7 Button .............................................................................................................................................................................................. 7 Host ................................................................................................................................................................................................. 7 LED indicators of the Button and Host ................................................................................................................................... 8 Installation .....................................................................................................................................9 Environment check ....................................................................................................................................................................... 9 Assembling the Host .....................................................................................................................................10 Setting up the Host .......................................................................................................................................10 Attaching the Host to the ceiling ............................................................................................................................................10 Attaching the Host to a ceiling mount................................................................................................................................... 11 Placing the Host on a table .......................................................................................................................................................11 Installing the Host on the wall or trolley .............................................................................................................................. 13 Positioning the Host antennas ....................................................................................................................14 For ceiling installation ................................................................................................................................................................14 For ceiling mount installation ...................................................................................................................................................14 For table placement ...................................................................................................................................................................15 Connecting the HDMI cable and power ..................................................................................................15 Assembling the adapter ............................................................................................................................................................. 16 Connecting the HDMI cable..................................................................................................................................................... 17 Power supply via a power adapter .........................................................................................................................................17 LAN connection ..........................................................................................................................................................................18 Setting up and powering a Button .............................................................................................................18 Using Cable USB A(F) to USB A(M) .........................................................................................................20 Pairing a Button and Host ............................................................................................................................21 When the Host is placed on a table .......................................................................................................................................21 Storing Buttons and USB cable in the cradle ..........................................................................................23 Resetting an Host ..........................................................................................................................................23 Resetting a Button .........................................................................................................................................24 Starting and stopping presentations ......................................................................................26 Getting ready ..................................................................................................................................................26 Starting presentation .....................................................................................................................................26 Idle presentation ............................................................................................................................................27 Split screen presentations ............................................................................................................................28 Starting a split screen presentation ........................................................................................................................................28 Switching from a split screen to a full screen presentation ..............................................................................................29 Presenting with mobile devices ..................................................................................................................29 Controlling presentations ............................................................................................................................30 Troubleshooting ........................................................................................................................31 3/6/19 2 Introduction InstaShow S (shortened as the Product in this document) is a wireless device for corporate meeting rooms. Users expect devices to respond instantly, apps to launch and to control at their fingertips, and information to be available on demand. The product bypasses the complicated steps of IP addresses, driver installation, app execution, setting selection, etc. to quickly deliver professional, stable visual quality for teams to collaborate freely and confidently. The product is an unique all-

hardware solution without software issues for universal compatibility and display flexibility. A standard product set consists of an InstaShow S Host (shortened as Host in this document) and two InstaShow S Buttons (shortened as Button or Buttons in this document). Depending on the location where you buy the product, the software of the base unit can be different. You can buy additional Button kit if needed. Product features The product is equipped with the following features:

Features True Plug & Play No Software Split Screen Presentations Auto Channel Selection 3 Introduction Description Simply connect the product into your USB and HDMI ports, then push the button to start presenting immediately. The product doesn't need any software installation or execution. There's no setup, configuration, or waiting for pop-ups to launch. Just plug into your PC or Mac and start presenting immediately. Up to four users can simultaneoulsy project their screen via the product in a dual-screen, 3-way or 4-way split screen configuration, so that you can view and reference multiple documents/videos at the same time during your presentation. The product automatically selects the best wireless channel upon boot-up, ensuring smooth presentations in any environment. Features Description Touch back Screen Casting for Mobile Devices Wireless 802.11ac/n Video and Audio Assured Performance Extended Desktop When the Host is connected to a touchscreen display via its USB ports, you can use the touchscreen to control the screen of the PC that is presenting, allowing you to actively engage with the content that is being presented. Project your mobile devices screen wirelessly by connecting your mobile device to the Host via the InstaShare app (for both Android and iOS devices). The latest 802.11ac/n Wi-Fi guarantees extremely smooth wireless streaming without lag or buffering. The product's HDMI output supports up to 60Hz Full HD 1080p video and stereo sound without cable clutter or complicated driver selection. Peace of mind for consistent wireless presentation performance without relying on your PC. Keep your presenter view, notes, and backup data on your laptop screen while presenting to the wireless screen with extended desktop in both Windows and OS X. Touch back via USB port is only supported for PCs. Macs and mobile devices cannot be controlled via touch screens. Transmission distance depends on actual environment. Stated distance is based on line-of-sight measurement. Structures constructed of steel, wood, concrete, or brick may decrease transmission distance. According to regulatory restrictions in different regions of the world, Wi-Fi channels cannot be used in countries outside the purchased region. Package content InstaShow S Buttons InstaShow S Host and Lid 4 Antennas OPEN LOCK Cradle Adapter & Plugs Extender Power Cable Cable: HDMI A(M) to A(M) Cable: USB A(F) to USB A(M) Screws & Rubber Foot Introduction 4 Velcro Strap Quick Start Guide & Safety Statement Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. Use original accessories to ensure compatibility. Always keep the product and accessories out of reach of children. Product specification Feature Color Video outputs Frame Rate Output resolution Input resolution Number of simultaneous connections Audio Wireless transmission protocol Data rate wireless Frequency Band Authentication protocol Security (encryption) Support platform Reach Temperature range Humidity InstaShow S Button Black HDMI 1.4, comply with HDCP Up to 60fps depending on environment 720x568, 1280x720 (720P), 1920x1080 (1080p) Up to 1920x1080 32 pcs Stereo, Radio quality 16bits 48KHz IEEE 802.11ac, 5GHz, 2T2R IEEE 802.11n, 2.4GHz, 2T2R Up to 867 + 300Mbps 2.4GHz, 5GHz WPA2 (WPAS-PSK (Pre-Shared key) / WPA2-Enterprise) AES 128 bit Windows, MAC, Chrome. Any OS supporting HDMI standard 1.4 Max. 15M between the Button and the Host Operating: 0C to +40C (+32F to +104F) Storage: -10C to +60C (+14F to +140F) Storage: 5% to 90% relative humidity, non-condensing Operation: 10% to 80% relative humidity, non-condensing Cable Reset button USB Type A, HDMI Cable x1 Power supply Power consumption Spllit screen key x1 Dimension DC 5V10%, 0.5A Normal: 2.5W With cable: 81x291x24.2mm Without cable: 67x67x24.2mm LED Red (error), Green

(Wi-Fi connected), Blue

(presenting) InstaShow S Host Standby button x1 Weight 81g Power supply DC 12V10%, 2A 5 Introduction Feature Pairing key WAN Video output x1 x1 x1 HDMI 1.4 (video and audio) DC Power Jack x1 Power consumption Normal: 24W Dimension (WxHxD)

(not including rubber feet) With antennas: 200x140x150mm Without antennas: 154x140x34mm LED Cradle Red (error), Green (ready for connection), Blue (presenting) Weight (include antenna) 330g Dimension 100.4x92.6x152mm Weight 550g Introduction 6 Overview Button 4 3 Host 8 1 7 7 Introduction 1. Present key with LED indicator Press to start or stop presenting. 2. Split screen key Press to enable split screen presentations. 3. USB 3.0 connector Connect to a computer or laptop. 4. HDMI 1.4 connector Connect to a computer or laptop. 5. RESET 1 2 5 Bottom of Button Poke the RESET hole to reset the device if the device stops responding. Refer to Resetting an Host on page 23 for more information. 1 1 1 6 5 4 3 2 1. Fixture parts for the Antennas Refer to Assembling the Host on page 10 for more information. 2. USB-A Ports Connect to a touchscreen display, mouse, or keyboard, to control the projected screen. 3. HDMI port Connect to a display using a Cable HDMI A(M) to A(M). 4. LAN port Allows users access to the web management interface through a direct or network connection. 5. RESET Poke the RESET hole to reset the device if the device stops responding. Refer to Resetting a Button on page 24 for more information. 6. DC 2A port Connect to the supplied adapter extender power cable and adapter to power the Host. 7. PAIRING key Press to pair with a Button. 8. Standby button with LED indicator Press to turn the Host on and off. 9. Lid Refer to Attaching the Host to the ceiling on page 10 for more information. 9 Lid of Host Alignment hole LED indicators of the Button and Host Please refer to the tables below for detailed indicator and status descriptions for the Button and Host. LED indicator on the Button Status Description Static blue Flashing blue Flashing green Static green Flashing red Off Static red Quick flashing red The device is presenting. The device is in the process of pairing The device is starting up and connecting to the host. The device is upgrading the firmware. The device is connected and working normally. The device is unable to connect to a host. The device is powered off. The device is resetting. The reset process is triggered. LED indicator on the Host Status Description Static blue Flashing blue Flashing green 50% static green Static green Flashing red Static red Off Quick flashing red Connected device is presenting. The device is in the process of pairing. The device is starting up. The device is upgrading the firmware. The device is in network standby mode. The device is on and ready for connection. The device is encountering a problem. The device is resetting. The device is powered off. The reset process is triggered. Introduction 8 Installation This section will guide you on how to prepare the unit before its initial use. Environment check Before installing the product, check the environmental conditions. 1. Do not install the device near heat sources like radiators or direct sunlight, or in a site with excessive dust or humidity. 2. Ambient temperature conditions are listed as below. Maximum ambient temperature should be

+40C or 104F. Minimum ambient temperature should be +0C or 32F. Storage temperature should be -10C to +60C (14F to 140F). 3. Humidity conditions are listed as below. For storage, the relative humidity should be 5% to 90%

(non-condensing). For operation, the relative humidity should be10% to 80% (non-condensing). As the product works with different displays, the steps required to complete the installation may vary according to the actual environment and your display specifications. Follow the procedures below and refer to the specified sections for details. 1. Assemble the Host with the antennas. See Assembling the Host on page 10 for details. 2. Connect the Host to the display and power properly. See Connecting the HDMI cable and power on page 15 for details. Four installation methods are provided. Attaching the Host to the ceiling Attaching the Host to a ceiling mount Placing the Host on a table Installing the Host on the wall or trolley 3. Connect the Button to the desired devices and power properly. See Setting up and powering a Button on page 18 for details. 4. Make sure that all the connected devices have been powered on. Press the source button of the display and make sure that the HDMI source has been transmitted. See Pairing a Button and Host on page 21 for details. 9 Installation Assembling the Host Assemble the Host with four antennas by turning the antennas clockwise (right) and counterclockwise (left) to fasten them tightly. Setting up the Host You are provided with four different ways to position the Host. The total weight of the Host Unit is 330g. Attaching the Host to the ceiling 1. Place the lid on the ceiling and locate the alignment hole. 2. Use the screws provided to lock the lid to the ceiling. 3. Lock the first hole (1). 4. Follow the instruction in the illustration below to lock the other holes (2-4). 5. Rotate the Host counterclockwise to affix the Host to the lid.. Alignment hole 3 1 2 4 Please only use the screws (M3*16 tapping screw) provided with the kit to mount the Host to the ceiling. Please see Positioning the Host antennas on page 14 for guidelines on positioning the antenna to maximize signal reception. Installation 10 Attaching the Host to a ceiling mount If the display is mounted on the ceiling:

1. Attach the Host to the ceiling mount using the provided velcro strap. 2. Fix the Host to the mounting holder. 3. Use the supplied velcro to fix the mounting holder and the Host to the ceiling mount as shown in the illustration. Please only use the velcro strap (300(L)mm*25(W)mm) provided with the kit to mount the Host to a ceiling mount. Please see Positioning the Host antennas on page 14 for guidelines on positioning the antenna to maximize signal reception. Placing the Host on a table If your display is placed on a table, first attach the lid of to the Host in the following the process described below:

1. Align the lid over the bottom of Host so that the triangle on the bottom side of the lid is aligned to the triangle in the lid compartment, then insert the lid into the lid compartment. 11 Installation 2. Turn the lid counter-clockwise until it clicks into place. 3. When the lid is correctly installed on the Host the alignment hole on the lid should be pointed to the LOCK print at the front side of the Host. 4. Attach the rubber feet to the recesses on the lid and put the Host right next to the display. Please only use the rubber foot provided with the kit to attach to the Host. Please see Positioning the Host antennas on page 14 for guidelines on positioning the antenna to maximize signal reception. Installation 12 Installing the Host on the wall or trolley If you need to install the Host near a display:

1. Stick double-sided tape to the lid of the Host. 2. Affix the Host on the wall near the display. 3. Keep the antennas away from any signal obstructions. You can also place the Host on a mobile display trolley. See the illustration. Please only use double-sided sponge tape on the lid of the Host. Please wait 24 hours after you attach the double-sided sponge tape to the lid of the Host. 13 Installation Positioning the Host antennas Once you have properly installed the Host, follow the guidelines below to position the antennas to maximize signal reception:

For ceiling installation Position the antennas so that they are both pointed downwards at an angle roughly perpendicular to the ceiling:

For ceiling mount installation Position the antennas so that they are both point either upwards or downwards roughly parallel to the ceiling mount:

If you encounter bad signal reception after initial use of the Host you can manually adjust the antennas so that they tilt at a slight angle to maximize signal reception. When doing so, avoid tilting the antennas toward the ceiling mount:

Installation 14 Avoid positioning the antennas in a horizontal manner, this may result in a weak signal reception:

If the Host is attached to a metallic ceiling mount ensure that the antennas are at least 3 cm away from the metal portion of the ceiling mount:

3 cm 3 cm For table placement Position the antennas so that they are both pointed upwards roughly perpendicular to the table:

Connecting the HDMI cable and power Once the Host has been positioned properly near the display, connect the HDMI cable and power to ensure signal transmission. 15 Installation Assembling the adapter Every adapter provided in the box includes a plug socket and plugs based on the region in which you purchased the product. Below are images of the standard American, standard European, standard Australian, and standard UK plugs:

Standard American Standard European Standard Australian Standard UK To connect the plug of your choice, follow the steps below. 1. Align and insert the plug into the adapter. 2. Push the plug all the way in until it clips into place. 2 1 To disconnect the plug, follow the steps below. 1 2 1. Push the latch in the middle. 2. Detach the plug by pushing it outward and remove the plug. Installation 16 Connecting the HDMI cable Connect the HDMI cable to the HDMI out jack of the Host and the HDMI input jack of the projector. HDMI HDMI Power supply via a power adapter Connect the male connector of the extender power cable to the power jack of the Host, then connect the supplied power adapter to the female connector of the extender power cable, and then plug the other end of the power adapter into a wall socket. Once the connection is set up press the power switch on the extender power cable to supply power to the Host, the LED indicator on the standby button of the Host lights up static green when the power is supplied. HDMI POWER HDMI For BenQ IFP (Interactive Flat Panel) products, please have power supplied via a power adapter. 17 Installation LAN connection The Host can be connected to a local network or directly to a laptop. The LAN connection can be used to configure the product and update the software. Insert a network cable with RJ-45 connectors into the LAN port and connect the other side to a LAN. Setting up and powering a Button 1. Connect the Buttons HDMI and USB jacks to the corresponding inputs of a laptop. See the illus-

tration. HDMI 1.4 USB 3.0 2. The LED indicator of the Button will flash green while the Button is starting up. 3. When the button is ready to present, the LED indicator will turn solid green. Press the Present key when the LED indicator turns green. If the button encounters problems while pairing with the Host during startup the LED indicator will flash red. Repeat the previous the process again until the LED turns solid green. See LED indicators of the Button and Host on page 8 for more information on LED behavior. Handle the Button cable with care. Rough handling might cause defects. Pull/Push the plug instead of the cable when inserting or removing Buttons. Installation 18 If you purchase an additional Button (via an Kit), please follow the process described below:

1. Follow the pairing instructions described in Pairing a Button and Host on page 21. 2. Connect the Buttons HDMI and USB jacks to the corresponding inputs of a laptop. See the illustration. HDMI 1.4 USB 3.0 3. The LED indicator of the Button will flash green while the Button is starting up. 4. When the Button is ready to present, the LED indicator will turn solid green. Press the Present key when the LED indicator turns green. . Handle the Button cable with care. Rough handling might cause defects. Pull/Push the plug instead of the cable when inserting or removing Buttons. 19 Installation Using Cable USB A(F) to USB A(M) A USB cable is provided for MacBook and Windows laptop users. 1. Insert the HDMI cable of the Button to the HDMI converter of your laptop. 2. Connect the cable USB A(F) to your laptop. 3. Connect the Buttons USB jack to the Cable USB A(M). HDMI USB Cable USB A(F) to USB A(M) Make sure your own HDMI converter is workable. Installation 20 Pairing a Button and Host The product includes an Host and two Buttons, which are paired before shipment. In such a case, you dont need to pair them again. However, if you buy two or more sets of InstaShow S, and you want to pair a Button with a different Host, you need to follow the instruction below. If you buy an additional Button Kit, and you want to pair the new Buttons with your Host, you need to follow the instruction below as well. When the Host is placed on a table 1. Make sure your Host is ready with power supply. Connect the Buttons HDMI and USB jacks to the corresponding inputs of a laptop. HDMI 1.4 USB 3.0 2. When the Button is connected to the laptop, the LED indicator of the Button will flash red. The Button is in pairing mode, waiting to pair with your Host. If a Button nearby has been paired with a Host before, it will turn static green. 21 Installation 3. Press the PAIRING key of the Host for five seconds, the LED indicator of the Host will blink blue for two minutes, waiting to pair with a Button. 00:00:00 00:00:05 4. Press the split screen key on the side of the Button for five seconds. The LED indicator of the Button will blink blue for about 10 seconds. The pairing process is ongoing. The Pairing in progress message will be shown on the screen. 00:00:00 00:00:05 Pairing in progress The images are for reference only. Each product has different serial number. Installation 22 5. The LED indicator of the Button turns static green and a Pairing complete message will be shown when the Host and Button are successfully paired. Pairing complete The maximum number of Buttons you can pair with one Host is 32. Storing Buttons and USB cable in the cradle You are provided with two different ways to store the Buttons in the cradle. Place the Buttons in the cradle vertically (1) or horizontally (2). See the illustrations. 1 2 Resetting an Host Resetting an Host allows you to return the Host to its original factory settings. Reset the Host using the following steps:

23 Installation 1. Connect the power port on the Host to a power source and wait for at least 30 seconds. After the Host has been connected to a power source for at least 30 seconds, the Host LED may indicate any one of the statuses described in LED indicators of the Button and Host. As long as the Host has been connected to a power source for at least 30 seconds, you may proceed to the next step of the resetting process regardless of the status of the Host LED. 2. Poke the RESET hole at the rear of the Host with a pin for at least 2 seconds. 3. The Host LED will begin quick flashing red (flash red twice every second) for 10 seconds, then light up static red for 15 to 20 seconds, indicating that the Host is resetting. 4. Once the Host LED lights up static green the resetting process is complete. Do not disconnect the Host from its power source at any time during the resetting process. Resetting a Button Resetting a Button allows you to return the Button to its original factory settings. You may want to reset a Button because of either one of the following conditions:

You purchased an additional Button (via a Button Kit) which has not been paired to a Host. A Button that was included in the original package has been paired to a different Host (one which was not originally included with the Button in the package), and you want to quickly pair it back to its original Host. A Button that was included in the original package has been paired to a different Host (one which was not originally included with the Button in the package), and you want to re-pair the Button to its original Host while the Host is not powered on. Reset a Button using the following steps:

1. If the original Host is powered on, place the Button within range of the original Host and ensure the LED on the Host is static green. Installation 24 2. Connect the USB 3.0 connector on the Button to a powered on laptop and wait for at least 30 seconds. After the Button has been connected to a powered on laptop for at least 30 seconds, the Button LED may indicate any one of the statuses described in LED indicators of the Button and Host. As long as the Button has been connected to a powered on laptop for at least 30 seconds, you may proceed to the next step of the resetting process regardless of the status of the Button LED. 3. Poke the RESET hole at the bottom of the Button with a pin for at least 2 seconds. 4. The Button LED will begin quick flashing red (flash red twice every second) for 10 seconds, then light up static red for 15 to 20 seconds, indicating that the Button is resetting. 5. Once the Button LED lights up static green the resetting process is complete. Do not disconnect the Button from its power source at any time during the resetting process. 25 Installation Starting and stopping presentations This section will guide you on how to start and stop a presentation using the product. Getting ready Make sure that all the connected devices have been powered on and ready for the presentation. As the product could work with different projectors, IFPs, TVs, or monitors with standard HDMI ports, the steps required to start a presentation may vary according to the actual environment and your display specifications. Follow the procedures below and refer to the specified sections for details. 1. To start a presentation, see Starting presentation on page 26 for details. 2. To stop a presentation, see Idle presentation on page 27 for details. 3. To start a split-screen presentation, see Split screen presentations on page 28 for details. 4. To start a presentation with a mobile device, see Presenting with mobile devices on page 29 for details. 5. To control presentations via a touchscreen displays or mouse/keyboard see Controlling presentations on page 30 for details. Starting presentation 1. Make sure power is supplied to the Host. See Connecting the HDMI cable and power on page 15 for more information. 2. Choose the HDMI source corresponding to the Host on the display. You will see the Guide screen. Guide Screen 3. Please follow the instruction on the Guide screen to supply power to the Button. You can also see Setting up and powering a Button on page 18 for more information. The LED indicator on the Button is static green when the Button is connected and working properly. 4. To start a presentation, press the Present key. Starting and stopping presentations 26 5. The device starts presenting, and the LED indicator of the Button turns static blue. Present key Make sure the transmission distance between the Button and Host is within 15M and with no obstacles. The product supports MacBooks and Windows laptops to mirror an extended desktop. Idle presentation 1. To stop a presentation, press the Present key. 2. The device stops presenting, and the LED indicator of the Button turns green. 3. Users can press the Present key to return to the presentation. Present key 27 Starting and stopping presentations Split screen presentations The product allows up to 4 users to present simultaneously in a split screen orientation. Starting a split screen presentation 1. Connect a Button to each computer that will be presenting in the split screen presentation. See Setting up and powering a Button on page 18 for more information. Make sure that all Buttons have already been paired to the Host projecting the presentation. See Pairing a Button and Host on page 21 for more information. 2. Start a normal presentation using one of the Host buttons. See Starting presentation on page 26 for more information. 3. Press the split screen button on the Host that started the presentation to enable split screen presentations. 4. Once a notification appears on-screen indicating that the split screen function has been enabled, press the Present key on the Button of the second computer that wants to join the split screen presentation. 5. Repeat step 4 for all other users that want to join the split screen presentation. Only up to 4 users are simultaneously supported in a split screen presentation. The layout of the split screen presentation will be dictated by the amount of users in the presentation. If split screen is not enabled by the initial Button, all subsequent connections by other Buttons will be full screen presentations. Starting and stopping presentations 28 Switching from a split screen to a full screen presentation Once in a split screen presentation you can switch to a full screen presentation of any of the participants screen by pressing the split screen button on the Button of the computer that wants to present in a full screen. To return to a split screen presentation repeat the steps in Starting a split screen presentation on page 28. Presenting with mobile devices Users with mobile devices can connect their mobile devices to the Host and make a presentation via the InstaShare app by following the steps below:

1. Install the InstaShare app on your mobile device using the QR code located on the guide screen. 2. In your mobile devices Wi-Fi menu, connect to the SSID indicated in the guide screen. 3. Use the InstaShare app to project your screen. 29 Starting and stopping presentations Controlling presentations When a Host is connected to a touchscreen display and a PC is presenting via a Button, you can use a USB Type-A cable to connect any of the USB ports located at the rear of the Host to the touch input USB port of the display to control the interface of the PC remotely via touch gestures on the display. R ESET W AN H D MI USB 1 USB 2 The product only supports touch control for Windows-based PCs. The product does not support touch control for MacBooks or smartphones connected via the InstaShare app. For presentations that do not feature a touchscreen display, you can connect a USB mouse and/or USB keyboard to any of the USB ports located at the rear of the Host to control the interface of the presenting computer and input text remotely via the mouse/keyboard. R ESET W AN H D MI USB 1 USB 2 Starting and stopping presentations 30 Cause The Button is connecting to another Host. Pressing time is not enough. Solution The Button should be paired again with the Host. Press the Present key until the LED indicator turns from green to blue. Insufficient power supply Change power supply of the Host to a power adapter. Insufficient power supply for the Button. An laptop with USB 2.0 port may be used as the power supply for the Button. Wi-Fi interference or signal attenuation The HDMI connection between your laptop and the Button is loose. Your laptop cannot detect the second monitor. The audio signal on your laptop is muted. The audio output of the laptop hasnt been set to the second screen (BenQ InstaShow S) from the EDID of the Button. Make sure you use USB 3.0 as the power supply for the Button. Make sure the transmission distance is within 15M and with no obstacles. Restart the Host in order to rescan the Wi-Fi 5G channel. Reconnect the HDMI cable of the Button. Reconnect the USB cable of the Button. Reboot your laptop. Right click on the speaker icon and switch off the mute. Change the default audio output to the second screen (BenQ InstaShow S) on the laptop. Troubleshooting Category Problem Your screen is not appearing on the display when pressing the Button. The screen turns blank or flickers when the Host is presenting. The screen lags seriously and the audio breaks up sometimes. The message, "No Signal", from the Host is shown on the display when the Button is presenting, or your screen is blank gray. Your screen is shown, but your audio is not playing on the audio system of the meeting room. Your screen Your screen 31 Troubleshooting Category Problem Cause Solution The Button The Button Your content is removed from the display and the LED indicator of your Button is blinking red. The LED indicator of the Button is blinking red when the power is on. The LED indicator of the Button is always off. The Button automatically restarts sometimes. The LED indicator on the Button remains static red even after it has been powered on for 30 seconds. The pairing function cannot be executed via the MODE key while the Button is powered on and the LED starts flashing red. The wireless connection is lost between the Button and Host. 1. The Host will restore the Wi-Fi connection automatically. 2. If this fails, the LED indicator of your Button starts blinking red. 3. Unplug the Button from your laptop and try again. Wi-Fi interference or signal attenuation The Host has not been turned on. The Host has not paired with a Button. Wi-Fi interference or signal attenuation There is no power supply. Insufficient power supply. Make sure the transmission distance is within 15M and with no obstacles. Make sure Host is turned on. The Host should pair with the Button again. Make sure the transmission distance is within 15M and with no obstacles. Check the USB port of your laptop. If the port fails to function, try other USB ports. Make sure you use USB 3.0 as the power supply for the Button. The Button has not been properly powered off during the resetting process Reset the Button. Troubleshooting 32 Cause The display is switched off. The wrong input is selected. The display cable is not connected properly. The display fails to show the Hosts output resolution at 720p in "Guide Screen" or "Idle Screen". The Host is in Network Standby Mode when network standby function is enabled. The Host is in HDMI Standby Mode when HDMI standby function is enabled. The Host is powered off. Insufficient power supply The Host has not been properly powered off during the resetting process The HDMI connection between your laptop and the Button is loose. Laptop problem The Button is shutdown. Solution Switch on the display. Select the correct input. Insert the HDMI cable between the Host and the display device again. Replace the display with a new one that supports output resolution at 720p. Press the Present key of the Button to start presentation. Briefly press the standby button on the Host or power on the display (connected to the Host with an HDMI cable). The Host will wake up automatically. Briefly press the standby button on the Host. Change power supply of Host to a power adapter. Reset the Host. Reconnect the HDMI cable of the Button. Reboot your laptop. Reconnect the USB cable of the Button. Category Problem The Host Nothing is shown on the display at all. The Host EDID Nothing is shown on the display at all. The LED indicator on the Host remains static red even after it has been powered on for 30 seconds. After connecting the Button to your laptop, the second screen

(InstaShow S) cannot be detected. 33 Troubleshooting Category Problem Cause Solution Pairing Windows Software The message,

"Pairing failed", from the Host is shown on the display when the Host is pairing with the Button. When presenting a video file via Gom Media Player, the full-screen image is cut into upper and lower halves. Wi-Fi interference or signal attenuation The Button has not entered the pairing mode in time. Make sure the transmission distance is within 15M and with no obstacles. When the Host enters pairing mode, the Button should also enter pairing mode within two minutes. Media player Use other media players to play video files, such as Windows Media Player. Troubleshooting 34 Regulatory Statements V1.1 2019-03-08 CE DoC DECLARATION OF CONFORMITY English The device complies with the requirements set out in the Council Directives relevant Union harmonisation legislation:

RED Directive (2014/53/EU) RoHS Directive 2011/65/EU & (EU) 2015/863 Ecodesign Directive 2009/125/EC Turkish ErP (Decision 2010/643) Turkish EEE Directive DCLARATION DE CONFORMIT Franais L'appareil est conforme aux exigences dfinies dans les directives du Conseil relatives la lgislation d'harmonisation de l'Union :

Directive RED (2014/53/UE) Directive RoHS 2011/65/UE et (UE) 2015/863 Directive sur l'coconception 2009/125/CE ErP turque (dcision 2010/643) Directive EEE turque DECLARACIN DE CONFORMIDAD Espaol El dispositivo cumple los requisitos impuestos en las directivas del Consejo relativas a la legislacin de armonizacin de la Unin Europea:

Directiva sobre equipos radioelctricos (2014/53/UE) Directiva sobre sustancias peligrosas 2011/65/UE y (UE) 2015/863 Directiva sobre diseo ecolgico 2009/125/CE ErP de Turqua (Decisin 2010/643) Directiva EEE de Turqua DECLARAO DE CONFORMIDADE Portugus O dispositivo est conforme aos requisitos das Diretivas do Conselho e relevante legislao de harmonizao da Unio Europeia:

Diretiva RED (2014/53/UE) Diretiva RoHS 2011/65/UE & (UE) 2015/863 Diretiva Ecodesign 2009/125/CE ErP Turca (Deciso 2010/643) Diretiva EEE Turca DICHIARAZIONE DI CONFORMIT Italiano Il dispositivo conforme con i requisiti definiti nelle Direttive del Consiglio relative alla Norma sull'armonizzazione dell'Unione:

Direttiva RED (2014/53/UE) Direttiva RoHS 2011/65/UE e (UE) 2015/863 Direttiva Ecodesign 2009/125/CE ErP turca (Decisione 2010/643) Direttiva EEE turca 1 KONFORMITTSERKLRUNG Deutsch Das Gert entspricht den Anforderungen der entsprechenden EU-Harmonisierungsrichtlinien des Rates:

RED-Richtlinie (2014/53/EU) RoHS-Richtlinie 2011/65/EU & (EU) 2015/863 kodesign-Richtlinie 2009/125/EG Trkische ErP (Beschluss 2010/643) Trkische EEE-Richtlinie Pycc

,

, (EU):

(2014/53/EU) 2011/65/EU (EU) 2015/863

(RoHS) 2009/125/EC,

( 2010/643) Owiadczenie zgodnoci Polski Urzdzenie jest zgodne z wymaganiami okrelonymi w odpowiednich unijnych Dyrektywach harmonizacyjnych Rady:

Dyrektywa RED (2014/53/UE) Dyrektywa RoHS 2011/65/UE i (UE) 2015/863 Dyrektywa w sprawie ekoprojektu 2009/125/WE Turecka dyrektywa ErP (decyzja 2010/643) Turecka dyrektywa EEE UYUM BEYANI Trke Aygt, Konsey Ynergeleri ile ilgili Birlik uyum mevzuatnda belirtilen artlara uygundur:

RED Ynergesi (2014/53/EU) RoHS Ynergesi 2011/65/EU & (EU) 2015/863 Eko-tasarm Ynergesi 2009/125/EC Trke ErP (Karar 2010/643) Trke EEE Ynergesi OVERENSSTEMMELSESERKL RING Dansk Enheden er i overensstemmelse med kravene i Rdets direktiv, relevant til EU's lovgivning om harmonisering:

RED-direktiv (2014/53/EU) RoHS-direktiv 2011/65/EU og (EU) 2015/863 Erp-direktiv 2009/125/EF Tyrkisk ErP (beslutning 2010/643) Tyrkisk EEE-direktiv VAATIMUSTENMUKAISUUSVAKUUTUS Suomi Laite on Euroopan neuvoston direktiivien olennaisen unionin harmonisointilainsdnnn vaatimusten mukainen:

RED-direktiivi (2014/53/EU) RoHS-direktiivi 2011/65/EU & (EU) 2015/863 Ecodesign-direktiivi 2009/125/EY Turkin ErP (Pts 2010/643) Turkin EEE-direktiivi 2 SAMSVARSERKL RING Norsk Enheten overholder kravene i EU-rdets harmoniseringsdirektiver:

RED-direktiv (2014/53/EU) RoHS-direktiv 2011/65/EU & (EU) 2015/863 Ecodesign-direktiv 2009/125/EC Tyrkisk ErP (beslutning 2010/643) Tyrkisk EEE-direktiv KONFORMITETSDEKLARATION Svenska Enheten uppfyller kraven som anges i Rdets direktivs relevanta harmoniseringslagstiftning fr Europeiska unionen:

RED-direktivet (2014/53/EU) RoHS-direktiv 2011/65/EU & (EU) 2015/863 Direktivet om ekodesign 2009/125/EG Turkiska ErP (beslut 2010/643) Turkiska EEE-direktivet DECLARAIE DE CONFORMITATE Romn Dispozitivul respect cerinele menionate n Directivele Consiliului i n legislaia armonizat relevant la nivelul Uniunii:

Directiva privind echipamentele radio (2014/53/UE) Directiva RoHS 2011/65/UE i (UE) 2015/863 Directiva privind proiectarea ecologic 2009/125/CE ErP Turcia (Decizia 2010/643) Directiva privind echipamentele electrice i electronice pentru Turcia PROHLEN O SHOD etina Zazen odpovd poadavkm stanovenm ve smrnicch Rady podle pslunch harmonizanch prvnch pedpis Unie:

Smrnice o rdiovch zazench (2014/53/EU) Smrnice o RoHS 2011/65/EU a (EU) 2015/863 Smrnice o ekodesignu 2009/125/ES Tureck ErP (rozhodnut 2010/643) Tureck smrnice EEE VERKLARING VAN OVEREENSTEMMING Nederlands Het apparaat voldoet aan de vereisten van de relevante richtlijnen van de Raad met betrekking tot harmonisatiewetgeving in de Unie:

RED-richtlijn (2014/53/EU) RoHS-richtlijn 2011/65/EU & (EU) 2015/863 Richtlijn inzake ecologisch ontwerp 2009/125/EG Turkse ErP (Besluit 2010/643) Turkse EEE-richtlijn MEGFELELSGI NYILATKOZAT Magyar Az eszkz megfelel a Tancs irnyelvek relevns unis harmonizlsi rendelkezsei ltal fellltott kvetelmnyeknek:

RED-irnyelv (2014/53/EU) 2011/65/EU s (EU) 2015/863 RoHS-irnyelv 2009/125/EK Ecodesign-irnyelv Trk ErP (2010/643-es hatrozat) Trk EEE-irnyelv 3

:

RED (2014/53/) RoHS 2011/65/ & () 2015/863 2009/125/

ErP ( 2010/643) EEE DEKLARACIJA O USKLAENOSTI Hrvatski Ovaj ureaj sukladan je s odredbama postavljenim u direktivama Vijea vezanim uz relevantne harmonizacijske zakone Unije:

RED Direktiva (2014/53/EU) RoHS Direktiva 2011/65/EU & (EU) 2015/863 Direktiva o ekolokom dizajnu 2009/125/EZ Turski ErP (Odluka 2010/643) Turska EEE direktiva

:

RED (2014/53/) RoHS 2011/65/ & () 2015/863 Ecodesign 2009/125/

ErP ( 2010/643) EEE 4 For EU Hereby, BenQ Corporation, declares that this WDC20 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following internet address:

https://www.benq.eu/en-eu/index.html This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body Hardware Version:

RKC180508_V1.02 (WDC2OTH) ; RKG180424_A_V1.03&RKG180424_B_V1.01 (WDC20TH);

Softwarw Version: WDC20(R)_1.00.20/1.2.8WDC20R; WDC20(T)_1.00.20WDC20TH Frequency band: 2.4G WDC20R RF Output Power 2400 ~ 2483.5MHz 12 dBm Frequency Band: 5G WDC20TH WDC20R RF Output Power & Transmit Power Control (TPC) 5.15 ~ 5.25GHz 10.82 dBm 5.15 ~ 5.25GHz 11.29 dBm 5.25 ~ 5.35GHz 10.94 dBm 5.25 ~ 5.35GHz 12.1 dBm m 5.47 ~ 5.725GHz 10 dBm 5.47 ~ 5.725GHz 10 dBm 5 RoHS Statement This product is compliant to implemented RoHS (Restriction of Hazardous Substances) type regulations worldwide, including but not limited to China, India, Japan, Korea and European Union. Turkey RoHS EEE Ynetmeliine Uygundur Elektrikli Ve Elektronik Eyalarda Bazi Zararli Maddelerin Kullaniminin Sinirlandirilmasina Dair Ynetmelik Ukraine RoHS

( 3 2008 . N 1057):

India RoHS Restriction on Hazardous Substances statement (India) This product complies with the "India" E-waste Rule 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or PolyBrominated Diphenyl Ethers in concentrations exceeding 0.1 weight% and 0.01 weight for cadmium except for exemptions set in Schedule 2 of the Rule. Vietnam RoHS Cng ty BenQ tuyn b rng tt c cc sn phm mang nhn hiu BenQ c thit k v sn xut ph hp vi Thng t 30/2011/TT-BCT ca Vit Nam v vic hn ch cc cht c hi v nng ti a ca cht c cho php trong cc vt liu ng nht (ngoi tr cc trng hp min tr c lit k trong Thng t ny). 6 WEEE directive WEEE directive English Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. WEEE Battery This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment. Recycling information: See http://www.benq.com/support/recycle for details. Directive DEEE Franais Mise au rebut des dchets dquipements lectriques et lectroniques et/ou des piles par les particuliers dans lUnion Europenne. Ce symbole figurant sur le produit ou lemballage signifie que celui-ci ne peut pas tre jet avec les ordures mnagres. Vous devez mettre vos dchets dquipements et/ou piles au rebut en le dposant dans un point de collecte prvu cet effet afin que les quipements lectroniques et lectriques et/ou piles soient recycls. Pour de plus amples informations sur le recyclage de ce produit et/ou cette pile, veuillez prendre contact avec lorganisme local comptent, le service dlimination des dchets mnagers ou le point de vente du produit.Le recyclage des matriaux aidera conserver les ressources naturelles et sassurer quils seront recycls dune faon que cela protge la sant humaine et lenvironnement. WEEE Pile Recycling information: See http://www.benq.com/support/recycle for details. 7 Directiva WEEE Espaol Residuos de aparatos elctricos y electrnicos y/o batera por parte de los usuarios domsticos privados en la Unin Europea. El smbolo que muestra el producto o el embalaje indica que no puede ser desechado como residuo domstico. Para desechar el equipo siga las directrices aplicables para el reciclaje de equipo elctrico y electrnico y/o batera. Para obtener ms informacin sobre el reciclaje de este equipo y/o batera, pngase en contacto con el ayuntamiento, la tienda donde adquiri el equipo o el servicio de recogida de basuras. Al reciclar materiales ayudamos a conservar el medio natural y a garantizar el reciclaje de manera que proteja la salud y el medioambiente. WEEE Batera Recycling information: See http://www.benq.com/support/recycle for details. WEEE-Richtlinie Deutsch Entsorgung von Elektro- und Elektronikgerten bzw. Batterien in Privathaushalten der Europischen Union. Das Symbol auf der Produktverpackung zeigt an, dass dieses Gert nicht mit dem normalen Hausmll entsorgt werden darf. Sie sind verpflichtet, Ihre Altgerte bzw. Batterien entsprechend der geltenden Bestimmungen fr die Wiederverwertung von Elektro- und Elektronik-Altgerten bzw. Batterien zu entsorgen. Weitere Informationen ber das Recycling dieses Gerts bzw. Batterie erhalten Sie von Ihren rtlichen Behrden, Ihrem Fachhndler oder der lokalen Rcknahmestelle. Fachgerechtes Wertstoffrecycling spart nicht nur wertvolle Ressourcen, sondern schtzt auch Umwelt und Gesundheit. WEEE Batterie Recycling information: See http://www.benq.com/support/recycle for details. Direttiva WEEE Italiano Smaltimento di apparecchi elettrici ed elettronici e/o batterie nell'Unione Europea da parte di utenti privati. WEEE Batteria Questo simbolo sul prodotto o sulla confezione indica che l'articolo non pu essere smaltito come i normali rifiuti domestici. necessario smaltire le apparecchiature e/o batterie secondo quanto previsto dagli schemi di recupero per il riciclaggio di apparecchiature elettriche e elettroniche e/o batterie. Per ulteriori informazioni sul riciclaggio di questo apparecchio e/o batteria, contattare lente della propria citt, il negozio dove stato acquistato lapparecchio o il proprio servizio di smaltimento rifiuti domestici. Il riciclaggio dei materiali contribuisce a ridurre il consumo di risorse naturali e assicura che i materiali siano riciclati tutelando la salute umana e l'ambiente. Recycling information: See http://www.benq.com/support/recycle for details. WEEE Pycc

/

. WEEE

,

.

/

/ .

/

, ,

, . Recycling information: See http://www.benq.com/support/recycle for details. 8 WEEE-direktiv Svenska Riktlinjer fr kassering av avfall som utgrs av eller innehller elektriska eller elektroniska produkter och/eller batteri, gllande hushll i EU. Den hr symbolen kan finnas p produkten eller p frpackningen och betyder att produkten inte kan kasseras som vanligt hushllsavfall. Nr du vill kassera produkten och/eller batteri mste du lmna in den p det stlle som avses fr tervinning av elektriska eller elektroniska produkter och/eller batteri. Om du vill ha mer information om tervinning av den hr typen av utrustning och/eller batteri kan du vnda dig till din kommun, ditt inkpsstlle eller till den lokala sophmtningen. Genom att tervinna materialet i produkten kan vi spara p naturtillgngarna och frskra oss om att produkten tervinns p ett stt som skyddar mnniskors hlsa och miljn. WEEE Batteri Recycling information: See http://www.benq.com/support/recycle for details. WEEE-richtlijn Nederlands Wegwerpen van elektrische en elektronische apparatuur en/of accu's door huishoudens in de Europese Unie. Dit symbool geeft aan dat het product niet met het huishoudelijke afval kan worden aangeboden. U moet afgedankte apparatuur en/of acccu's wegwerpen door ze in te leveren op de inzamelpunten voor elektrische en elektronische apparatuur en/of accu's. Voor meer informatie over het hergebruik van deze apparatuur en/of de accu neemt u contact op met uw gemeente, de winkel waar u de apparatuur hebt gekocht of de milieudienst van de gemeente. Door het recyclen van de materialen worden natuurlijke hulpbronnen behouden en helpt u de natuur en de volksgezondheid te beschermen. WEEE Accu Recycling information: See http://www.benq.com/support/recycle for details. Dyrektywa WEEE Polski Utylizacja odpadw z urzdze elektrycznych i elektronicznych lub baterii przez uytkownikw prywatnych w Unii Europejskiej. Ten symbol na urzdzeniu lub opakowaniu oznacza, e nie moe by ono utylizowane razem z odpadami domowymi. Zuyty sprzt lub baterie naley przekaza do odpowiedniego punktu zwrotu sprztu elektrycznego i elektronicznego w celu wtrnego przetworzenia. Szczegowe informacje dotyczce wtrnego przetwarzania tych urzdze lub baterii mona uzyska, kontaktujc si z lokaln administracj, sprzedawc lub lokalnym przedsibiorstwem oczyszczania. Przetwarzanie wtrne materiaw pomaga w zachowaniu surowcw naturalnych i utylizacji w sposb przyjazny dla ludzkiego zdrowia i rodowiska. WEEE Bateria Recycling information: See http://www.benq.com/support/recycle for details. Smrnice WEEE etina Likvidace vyazench elektrickch a elektronickch zazen anebo bateri v domcnostech uivatel v Evropsk unii. WEEE Baterie Tento symbol na vrobku nebo na jeho obalu znamen, e dan zazen nelze vyhodit do bnho domovnho odpadu. Vyazen elektrick nebo elektronick zazen anebo baterii je nutno zlikvidovat odevzdnm k recyklaci v souladu s platnm plnem recyklace elektrickch a elektronickch zazen anebo bateri. Dal informace o recyklaci tohoto zazen anebo bateri zskte u mstnch ad, v obchod, kde jste vrobek zakoupili nebo u spolenosti, kter se zabv likvidac domovnho odpadu. Recyklace materil pomhchrnit prodn zdroje a zaruuje likvidaci vrobku zpsobem, kterjeetrn klidskmu zdrav a ivotnmu prosted. Recycling information: See http://www.benq.com/support/recycle for details. 9 WEEE direktifi Trke Avrupa Birlii lkelerinde zel ev eyas kullanclar tarafndan Elektrikli ve Elektronik Cihazlarn ve/veya Pillerin Atlmas. rn yada ambalaj zerindeki bu sembol, bunun evsel atk olarak ilem grmemesi gerektiini ifade etmektedir. Atk cihaznz ve/veya pilleri, elektrikli ve elektronik cihazlarn ve/veya pillerin geri dnm iin uygulanabilir geri alma emasna gre ele alarak atmalsnz. Bu cihazn ve/veya pillerin geri dnm hakknda daha fazla bilgi edinmek iin ltfen cihaz satn aldnz yerel bayiye veya dkkana yada ev eyas uzaklatrma servisine bavurun. Materyallerin geri dnm, doal kaynaklarn korunmasn ve insan salna ve evreye zarar verilmeksizin geri dntrlmesini gvence etmektedir. WEEE Pil Recycling information: See http://www.benq.com/support/recycle for details. Directiva REE Portugus Eliminao de Resduos de Equipamentos Elctricos e Electrnicos e/ou Baterias por particulares na Unio Europeia. WEEE Bateria Este smbolo no produto ou na embalagem indica que no pode ser eliminado como lixo domstico. Dever eliminar os resduos dos seus equipamentos e/ou baterias entregando-os nos pontos de recolha aplicveis para reciclagem de equipamentos de equipamentos elctricos e electrnicos e/ou baterias. Para mais informaes sobre a reciclagem destes equipamentos e/ou baterias, contacte a sua cmara municipal, a loja onde adquiriu o equipamento ou servio de recolha de lixo domstico. A reciclagem de materiais contribuir para a conservao dos recursos naturais e assegura que so reciclados de forma a proteger a sade humana e o ambiente. Recycling information: See http://www.benq.com/support/recycle for details. WEEE irnyelv Magyar Az Eurpai Uniban a hztartsok elektromos s elektronikus hulladkainak s/vagy az akkumultorok kezelsrl szl irnyelv. WEEE Akkumultor A termken vagy a csomagolson ez a szimblum azt jelzi, azt ahztartsihulladkoktl kln kell kezelni. A kszlket s/vagy az akkumultorokat az elektronikus s elektromos hulladkokra s/vagy az akkumultorokra rvnyes jrahasznostsi rendszer keretein bell kell leadni jrahasznostsra. A kszlk s/vagy akkumultorok jrahasznosts cljra val begyjtsrl bvebb informcit kaphat a helyi nkormnyzatnl, a vsrls helyn vagy a hztartsi hulladkot elszllt szolgltatjnl. Azanyagok jrahasznostsra val begyjtse hozzjrul a termszeti erforrsok megrzshez s biztostja, hogy a hulladkok szelektlsa azemberi egszsget s a krnyezetet vd mdon trtnjk. Recycling information: See http://www.benq.com/support/recycle for details. WEEE

/

. WEEE

,

.

/ ,

/ .

/ , ,

, ,

. Recycling information: See http://www.benq.com/support/recycle for details. 10 WEEE direktiva Hrvatski Odlaganje u otpad elektrinih i elektronikih ureaja i/ili baterija iz kuanstava u Europskoj uniji. Ovaj simbol na proizvodu ili pakiranju naznauje da se ovaj proizvod ne moe odbaciti s kunim otpadom. Ureaje za otpad i/ili baterije trebate odloiti u otpad u skladu s pravilima povrata, zbrinjavanja i reciklae elektrinih i elektronikih ureaja i/ili baterija. Vie informacija o recikliranju ovog ureaja i/ili baeterije, potraite u vaem mjesnom uredu, u trgovini gdje ste kupili proizvod ili u slubi koja prikuplja va kuni otpad. Recikliranje materijala pomoi e ouvanju prirodnih resursa i osigurati recikliranje na nain koji titi ljudsko zdravlje i prirodni okoli. WEEE Baterija Recycling information: See http://www.benq.com/support/recycle for details. Directiva WEEE Romn Evacuarea deeurilor echipamentelor electrice i electronice i/sau bateriilor de ctre utilizatorii casnici din Uniunea European. WEEE Baterie Acest simbol de pe produs sau de pe ambalaj indic c acest produs nupoate fi evacuat ca deeu casnic. Trebuie s evacuai deeurile de echipamente i/sau bateria prin predarea conform schemei de preluare pentru reciclare a componentelor electrice i electronice i/sau a bateriilor. Pentru informaii suplimentare privind reciclarea acestui echipament i/sau a bateriei, contactai primria oraului dvs., magazinul de unde ai achiziionat echipamentul sau serviciul de salubritate pentru deeuri menajere. Reciclarea acestor materiale va ajuta la pstrarea resurselor naturale i asigur c sunt reciclate ntr-o modalitate care protejeaz viaa i mediul oamenilor. Recycling information: See http://www.benq.com/support/recycle for details. WEEE

/

. WEEE

.

/ ,

/

.

/ , ,

. Recycling information: See http://www.benq.com/support/recycle for details. WEEE-direktiv Dansk Bortskaffelse af elektrisk og elektronisk affald og/eller batterier, anvendt i husholdningen i EU. Dette symbol p produktet eller p emballagen angiver, at det ikke kan bortskaffes som husholdningsaffald. Du skal bortskaffe affald (udstyr) og/eller batterier ved at levere det/dem til relevante genbrugscentre for elektrisk og elektronisk udstyr og/eller batterier. For yderligere oplysninger om genbrug af dette udstyr og/eller batterier skal du kontakte kommunen, butikken hvor du kbte udstyret eller dit affaldsselskab. Genbrugsmaterialer hj lper med at bevare naturlige ressourcer og sikre, at det det genbruges p en mde, der beskytter sundheden og miljet. WEEE Batteri Oplysninger om genbrug: Se http://www.benq.com/support/recycle for yderligere oplysninger. WEEE-direktiivi Suomi 11 Shk- ja elektroniikkaromun ja/tai akkujen hvittminen yksityisiss kotitalouksissa Euroopan unionin alueella. Tm merkint tuotteessa tai sen pakkauksessa osoittaa, ett tuotetta ei voida hvitt kotitalousjtteen. Romulaitteet ja/tai akut tulee hvitt viemll ne erilliskeryspaikkaan shk- ja elektroniikkaromun ja/tai akkujen kierrtyst varten. Saat listietoja tmn laitteen ja/tai akun kierrttmisest ottamalla yhteytt alueesi jtehuoltoon, kotitalousjtteen kierrtyskeskukseen tai laitteen ostopaikkaan. Materiaalien kierrtys auttaa silyttmn luonnonvaroja ja varmistamaan, ett jtteet kierrtetn tavalla, joka suojelee ihmisten terveytt ja ymprist. WEEE Akku Kierrtystiedot: Listietoja http://www.benq.com/support/recycle. WEEE-direktiv Norwegian Kassering av elektrisk og elektronisk utstyr og/eller batterier for brukere i private husholdninger i EU. WEEE Batteri Dette symbolet p produktet eller p innpakningen angir at det ikke kan kasseres sammen med vanlig husholdningsavfall. Du m kaste utstyret og/eller batteriet ved overlevere det til det aktuelle retursenteret for resirkulering av elektrisk og elektronisk utstyr og/eller batteriet. Hvis du vil ha mer informasjon om resirkulering og/eller batteriet, vennligst kontakt lokale myndigheter, butikken der du kjpte utstyret eller en resirkuleringsstasjon. Resirkulering av materialer vil bidra til bevare naturlige ressurser og sikre at det resirkuleres p en mte som beskytter menneskers helse og milj. Resirkuleringsinformasjon: Se http://www.benq.com/support/recycle hvis du vil ha detaljer. 12 FCC statement (for the United States only) Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC RF exposure information (SAR) Model Name: WDC20TH FCC ID:JVPWDC20TH Radiation Exposure Statement SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited. Model Name: WDC20R This equipment should be installed and operated with minimum distance FCC ID:JVPWDC20R 20cm between the radiator & your body. Caution:

(i) the device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p. limit.

(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. FCC SDoC: Visit www.benq.com/en-us the purchased model > the Support tab > the User Manual tab to access the SDoC (Suppliers Declaration of Conformity) document. You may not find your products SDoC document online as it was not required at the time the product was manufactured. However, it does not change the fact that the product has been tested to comply with FCC standards, as indicated by the FCC logo on the product or on the label. 13 IC statement (for Canadian users) This Class B digital apparatus complies with Canadian ICES-3 (B). Cet appareil numrique de la classe A est conforme la norme NMB-3(B) du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IMPORTANT NOTE:

Radiation Exposure Statement This equipment should be installed and operated with minimum distance Model Name: WDC20TH 20cm between the radiator & your body. IC: 6175A-WDC20TH Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. This equipment should be installed and operated with minimum distance Model Name: WDC20R 20cm between the radiator & your body. IC: 6175A-WDC20R Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. This radio transmitter (IC: 6175A-WDC20TH) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 6175A-WDC20TH) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. WDC20R Type Manufacture Dipole Shenzhen Lejin radio frequency Gain

>

3dBi Connector IPX-I technology Co., LTD 14 WDC20TH Type FPCB Manufacture Shenzhen Lejin radio frequency technology Co., LTD Gain

>

2dBi Connector SMT 15 The device for operation in the band 5150-5250MHz is only for indoor use. Le dispositif destin tre utilis dans la bande 5150-5250 MHz est rserv une. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet quipement doit tre install et utilis avec une distance minimale de 20 centimtres entre le radiateur et votre corps. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site at http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/ RSS with the device transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines. Conformit des appareils de radiocommunication aux limites d'exposition humaine aux radiofrquences (CNR-102) L'ordinateur utilise des antennes intgrales faible gain qui n'mettent pas un champ lectromagntique suprieur aux normes imposes par Sant Canada pour la population. Consultez le Code de scurit 6 sur le site Internet de Sant Canada l'adresse suivante :

http://www.hc-sc.gc.ca/ L'nergie mise par les antennes relies aux cartes sans fil respecte la limite d'exposition aux radiofrquences telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102, version 5. Tests DAS sont effectus en utilisant les positions recommandes par la FCC/CNR avec le tlphone met la puissance certifie maximale dans toutes les bandes de frquences testes sans distance attacher loin du corps. Non-respect des restrictions ci-dessus peut entraner une violation des directives de la FCC/CNR. 16 VCCI (CLASS B) VCCI VCCI

(RF ) 5GHz 17

Reference No.: 190730N062 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 1 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 2 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 3 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 4 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 5 of 5 Report Version 1

Reference No.: 190730N062 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 1 of 5 Report Version 1 Reference No.: 190730N062 ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 2 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 3 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 4 of 5 Report Version 1 Reference No.: 190730N062 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: customerservice.dg@cn.bureauveritas.com Page 5 of 5 Report Version 1