ThankyouformakingBENROyourchoicefor professionalphotographic equipmentYourBENROgearis manufacturedtoprovideyearsof dependableserviceInordertoobtainoptimumsatisfactionandperformance wesuggestthatyoucarefullyreadtheseinstructions
7 8 9 3 4 5 1 2 6
Trigger Button
Customizable Key(2)
Phone Clamp
Type-C Charge Hole (charge for phones)
3.5mm Audio Input Port
Type-C Charge Hole (charge for gimbals)
3.5mm Mic Jack
Customizable Key (1)
Slide Button(Zoom/Focus)
move to find balance Wide-angle lens 13 14
Gimbals Universal Walk Mode Adjust the Focal Length Camera Scene Slide Button Function Customize Button Gimbals Calibration Pan Calibration Drift Calibration
Mic Jack
Customizable Button (1) Zoom/Focus Button
Trigger Button Customizable Button (2) Unlock Lens is here
A AF
Left UP Down Right Press the Button Once Slow Motion Video Shooting Static Time Lapse
Spring Button
Joystick
Power Button
App Manu Button
Photo/Video Shutter Button 10 11 12
Phoneographer P1 OPERATING INSTRUCTIONS
P1 Gimbals
Type-c port Android phone charging cable
OPERATING INSTRUCTIONS
Open the Gimbals (Figure 1, 2) 1. Press the spring button to unlock the rotatable arm, and then pull upwards the rotatable arm to open the gimbals. 2. Rotate the tilt motor and roll motor according to the unlock signs direction. The gimbals can be rotated freely to fully open the gimbals. Mount and Adjust the Mobile Phone (Figure 3, 4, 5) 1. Hold the phone clamp with the sticker downwards, and then extend the clamp to mount the mobile phone. Please remind to center the mobile phone. Note: the phone camera should be at the left side of the gimbals so that the camera cannot be hided. 2. If the third party wide angle lens is mounted, the mobile phone needs to be adjusted left and right to center the phones in between the motors. Bluetooth Connection (figure 6) 1. Download the APP of the gimbals to make sure both phone Bluetooth and shared location open. Open the operation interface of the APP, and then click the Bluetooth icon on the operation interface to connect with the gimbals. Gimbals Calibration (Figure 7) 1. Calibrate the gimbals when you firstly use the gimbals or the mobile is not balanced after mount the phone. 2. Put the gimbals on the flat table. Click setting on APP interface, and then block Gimbals. The pan calibration and drift calibration are shown on the screen. Firstly perform drift calibration, and then pan calibration. Note: please do not move the gimbals when calibrate the gimbals, or it will affect calibration function. APP Menu Button (Figure 8) 1. Click the APP menu button once to show the photo and video selection menu. Stir the joystick left and right to select photo or video. Stir the joystick up and down to select different functions of photo or video. Press the Shooting on/off button to start shootings. The Joystick (Figure 9) 1. Stir the joystick left and right when shooting to adjust the pan angle of the gimbals. Stir the joystick up and down to adjust the tile angle. External Microphone (Figure 10) 1. Use the audio cable to connect the phone earphone hole and the audio input hole on the phone clamp. And then install the microphone into the mic jack of the gimbals to finish installation. Customizable Button (1) (Figure 11) 1. At the factory default status, when press the button shortly, the phone can be changed to be 90 degree vertical shooting. Long press the button to perform 180 degree pan exchange. Zoom/Focus Button (Figure 12) 1. This button can control the zoom and focus of the phone camera. The two functions can be exchanged by click setting to select gimbals and then customize button. Trigger Button (Figure 13) 1. Quickly press the tripper button twice to return to the original status. 2. Press long to be lock mode to fix the lens direction. 3. Quickly press it twice and do not free your hand. The gimbals can be the quick follow status. Customizable Button (2) (Figure 14)
. Press long to change the mode. Green light: all follow mode; Blue light: pan follow 1 model. 2
1
1
1
1
1 90
Specifications
Gimbal
Working time
Working Voltage
Working Electric Flow
Working Temperature:
Product Size (W*D*H)
24h
Standard 7.4V
90mA (center of gravity is under balance status)
Extended:123*73*297(mm)
Closed:50*106*178(mm)
Product Weight
Tilt Axis Mechanical Moving Range
440g
330 degree
Roll Axis Mechanical Moving Range
330 degree
Pan Axis Mechanical Moving Range
360 degree unlimited rotation
Follow Tolerance at Static Status
Follow Tolerance at Motion Status
0.05
0.2
The Maximum Payload
Compatible Phone Width
Compatible Phone Thickness
Mic Jack Type
55-90mm
9mm 35mm TRRS
Battery
Battery Type
Battery Model
Battery Capacity
Charging Time
Lithium Battery SP26350
3h (Charging Power 10W)
USER NOTICE Do not exceed the maximum specified load capacity (see specifications on the package label or visit www.benro.com). Always ensure the gimbals locks are tightly engaged before mount any gear on your gimbals. Do not use any Tripod below temperatures of 14F or above +113F(10C / +45C). Always clean and dry any gimbals after has been exposed to wet, dusty, sandy or salty conditions. Your gimbals are not recommended for use in water. If required, clean the gimbals using a soft cloth with some no water alcohol. Do not leave any Tripod in the sun for prolonged periods and avoid high temperature exposure. For your safety, don't let your BENRO gear come in contact with any electrical power source. LIMITED WARRANTY COVERAGE Your Benro product has been carefully manufactured, has passed many quality assurance checks and has been thoroughly tested before shipment. It is warranted in the country from which you purchased it based on the date of purchase to the original owner, against defects in materials and workmanship. The warranty does not apply to damages caused by mishandling, dropping, or leaking batteries, nor modification or servicing performed by others. Please contact your local Benro dealer for further information and details about your warranty. To find the Benro distributor in your country, please check the distributor information at Benro official website www.benro.com.
Specifications and design are subject to change without notice
Bluetooth Version V4.1 (BLE mode) Frequency Range: 240 -2480MHz 2