Bernafon Radio Model - Quick Installation Radio Model Name: Aurora CIC The Aurora CIC radio model contains a radio transceiver running at 3.84 MHz implemented on a single hardware platform. The 3.84 MHz radio is a low power, short range, inductive radio transceiver working at a single channel at 3.84 MHz using MSK modulation with 320 kbit/s data rate and connected to a small coil antenna. The radio model is implemented in an engine module mounted on the main PCB with connections to the antennas, the microphones, the speaker and the battery terminals. The radio model can be seen in in the pictures below:
1 Bernafon Radio Model - Quick Installation Radio Model Name: Aurora CIC 1: Main PCB 2: Speaker 3: Microphone 4: Coil antenna (optional) 6: Double adhesive tape to temporary hold the components 9: Push button (optional) The Aurora CIC radio model requires only a single cell battery to be attached and a customized plastic shell, holding everything together, in order to be operational as a fully functional hearing aid. An example is shown here:
The Aurora CIC radio model is intended to be installed in Bernafon wireless CIC hearing aid devices (Completely-In-the-Canal) styles. 2 Bernafon Radio Model - Regulatory Label Information for USA & Canada The following information will be part of the User Manual for the final product:
Radio Model Name: Aurora CIC Contains: FCC ID:
IC:
U6XAUCIC 7031A-AUCIC NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1)
(2) This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Bernafon AG may void the FCC authorization to operate this equipment. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en L'exploitation est autorise aux deux conditions suivantes:
(1)
(2) compromettre le fonctionnement. 3