FCC ID: 2AVYU-OMLOX-ST Tag for Indoor Localisation

User Guide OMLOX WTAG 2020 BeSpoon SAS The copyrights in this user guide and the system described therein are owned by the company BeSpoon SAS (hereafter also referred as "BeSpoon"). BeSpoon, the BeSpoon logo, omlox and the omlox logo are registered trademarks. All other brand names, product names, or trademarks belong to their respective holders. BeSpoon SAS, company registered at RCS de Chambry Registration number (SIRET) 521 277 319 00039 VAT-No. FR06521277319 Contact information: see back cover. Proprietary Statement/Use This document contains proprietary information of BeSpoon which may not be used, reproduced, or disclosed to any other parties for any other purpose with-

out the express, written permission of BeSpoon. This document has been made available as part of the license that has been granted to an authorized user of BeSpoon software. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Use of this docu-

mentation is subject to the terms and limitations of that license agreement. This document describes all functionality that can be licensed for this product. Not all functionality described in this document may be available to you depending on your license agreement. If you are not aware of the relevant terms of your license agreement, contact sales at BeSpoon. Product Improvements Continuous improvement of products is a policy of BeSpoon SAS. All specifica-

tions and designs are subject to change without notice. Liability Disclaimer BeSpoon takes steps to ensure that its published documentation is correct;

however, errors do occur. BeSpoon reserves the right to correct any such errors and disclaims liability resulting there from. Limitation of Liability In no event shall BeSpoon, any of its licensors or anyone else involved in the creation, production, or delivery of the accompanying product (including hard-

ware and software) be liable for any of the following (collectively referred to as

"Injuries"): injuries (including death) or damages to persons or to property, or damages of any other kind, direct, indirect, special, exemplary, incidental or con-

sequential, including, but not limited to, loss of use, lost profits, lost revenues, loss of data, business interruption, replacement costs, debt service or rental pay-

ments, or damages owing by you to others, whether arising out of contract, tort, strict liability or otherwise, arising from or relating to the design, use (or inability to use) or operation of these materials, the software, documentation, hardware, or from any services provided by BeSpoon (whether or not BeSpoon or its licen-

sors knew or should have known of the possibility of any such Injuries) even if a remedy set forth herein is found to have failed of its essential purpose. Some ju-

risdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Table of contents 1. Introduction 2. Safety and compliance information 2.1. General 2.2. Battery 3. Specification 3.1. Datasheet 3.2. Hardware overview 3.3. Equipment needs 4. Deployment instructions 4.1. omlox WTag start 4.2. omlox WTag placement 4.3. omlox WTag control 5. Ask for support 1 2 2 2 5 5 6 6 7 7 7 7 8 1. Introduction omlox WTag is part of BeSpoon RTLS, a real-time locating system which uses Ultra-Wideband (UWB) pulses for real-time 3D location of objects in buildings in various industries. omlox WTags are mainly used as mobile devices while omlox Satellites are used as fixed bases in BeSpoon RTLS. In this case, the omlox Satellites are syn-

chronized with eachother. The mobile devices, such as omlox WTags or omlox SmartAntennas are tracked in two modes which can coexist: Multi-Tag Tracking

(server-centric) and GPS-like Positioning (device-centric). omlox WTags may also be provided as part of special mobile kits without omlox Satellites and without server. In this case, BeSpoon RTLS works in a particular device-centric mode, called Single Self-Positioning: only 1 omlox mobile device is tracked, the others are used as fixed bases (then, unlike in the main configuration, the fixed bases are not synchronized). BeSpoon RTLS overview - main configuration omlox satellites x, y, z x, y, z device and server-centric mobile devices location server BeSpoon RTLS overview - omlox mobile kits x, y, z x, y, z x, y, z This document includes regulatory information, as well as a detailed hardware specification and a description of its features. For detailed features and user instructions regarding the complete system, please refer to the BeSpoon RTLS documentation included in the RTLS DELIVERY Pack. The RTLS DELIVERY Pack includes documentation and the related software toolchain, to make the development processes easier. It contents evolves according to BeSpoon RTLS developments. 1 omlox WTag User Guide 2. Safety and compliance information 2.1. General This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in-

terference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that Consult the dealer or an experienced radio/TV technician for help. to which the receiver is connected. CAUTION BeSpoon RTLS equipments are configured to cover only the area inside buildings, preventing omlox WTags and other UWB devices of the system from emitting UWB signals outdoors. Contact your system administrator if you are unsure as to the extent of coverage. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. omlox WTags and the real-time location system BeSpoon RTLS may only be operated by qualified adult individuals. Installation and operation in childcare facilities and other places hosting children is prohibited. Any changes or modifications not expressly approved by BeSpoon could void the user's authority to operate this equipment. 2 omlox WTag User Guide Opening the casing of an omlox WTag and/or replacing any of its component, including the battery, is prohibited. omlox WTags only operate (i.e. receive and transmit UWB signals) within a complete UWB real-time location system BeSpoon RTLS, which must be professionally installed. In case omlox WTags, including their batteries, must be disposed of, they must be collected in compliance with Directive 2012/19/EU (Waste of Electrical and Electronic Equipment). 2.2. Battery Improper use of the battery may cause heat, fire, rupture, damage or capacity deterioration of the battery. In order to ensure a safe and efficient use of omlox WTag's battery, read the following information and apply the following instruc-

tions carefully. Nominal capacity Nominal voltage Discharge Cut-off Voltage Charge method Max charge current Charge voltage Max discharge current Weight Temperatures Charge Discharge Storage CC / CV

(Constant Current / Constant Voltage) 120mA

(for continuous discharging mode) 240mAh 3.7V 2.75V 120mA 4.2 0.03V about 7.0g 0C to +45C

-20C to +60C

-20C to +25C Storage relative humidity 65 20%

* capacity recovery rate should be more than 80%of initial Capacity Charge omlox WTags with a charging station approved by BeSpoon. The omlox WTag was inspected carefully before shipment. However, in the case any abnormality of bad smell or heat, etc, arises after purchase, please contact BeSpoon. For long-term storage, please charge at 0.5C for about one hour in advance 3 omlox WTag User Guide CAUTION Do not put into a fire, or heat, do not store the in high temperature environment. Do not drive a nail in, hit with a hammer, or stamp, do not strike in other ways. Do not submerge in water, do not wet. Do not leave on a charging station or equipment if it generates any deterioration (weakening and/or heat, color and/or shape changes, electrolytes, or cause leaks, etc.) or any abnormality. Do not discharge continuously when it is not charged. 4 omlox WTag User Guide EU Conformity Declaration 5 omlox WTag User GuidePROVISORY FORMPROVISORY FORMTO BE UPDATED WITH FINAL SCANTO BE UPDATED WITH FINAL SCAN Data connections Bluetooth, UWB Technology information Frequency band : [2402 2480] MHz Max power (EIRP) : 4dBm Frequency band : [3250 4750] MHz Max Mean power (EIRP) : -41.3dBm/MHz 59 x 47 x 19 mm 240 mAh Li-ion battery Wireless charging 3. Specification 3.1. Datasheet BLE UWB Dimensions Power supply Battery critical

(waiting for charge) Temperature protection Status Starting Scanning Calibrating Ranging 6 Max. charging current default: 100 mA adjustable to user requirements Operating temperature range

-20 to 55C IP code 64 Pre-programmed Unique ID 64 bits Light indicators see table below Light indicators LED Color Lighting details Point form LED and wave form LED 3 colors

(green, orange, red) All colors one after another, 500ms each Supplied Point form LED Orange Continuous Wave form LED Green if battery > 20%

Red otherwise Slow blink

(every 5s) Fast blink

(every 200 ms) Slow breath Fast blink Slow blink

(every 3s) omlox WTag User Guide 3.2. Hardware overview front view point form led

(charging) side view back view base view wave form led

(battery / activity) individual label individual label symbols CE certification mark WEEE symbol Directive 2012/19/EU 3.3. Equipment needs BeSpoon RTLS main configuration (omlox Satellites used as fixed bases) Full system equipment such as defined at section 3.4. of the document omloxSatellite_UserGuide.pdf Wireless charging devices BeSpoon RTLS mobile kits (mobile devices as fixed bases) At least 5 mobile devices Wireless charging devices and/or USB C cables Android tablet or smartphone PC (if UART transmission only) 7 omlox WTag User Guide 4. Deployment instructions 4.1. omlox WTag start omlox WTag starts on motion. To keep using your WTag, just ensure that the wave form led lights in green: it means the battery level is high enough to operate. see table in section 3.1 4.2. omlox WTag placement One simple golden rule ensures the best results when it comes to the deployment: avoid UWB signal deterioration and reflection by maximizing Line of Sight links (LoS) among all the devices included in the system. LoS matters among omlox Satellites for the quality of synchronization. Of course, it also matters between omlox Satellites and WTags for the location precision. Short animation sequences summarizing the points to pay attention to (online content) UWB synchronization Non-Line of Sight Examples Dilution of precision How to place fixed devices 4.3. omlox WTag control omlox WTags are configured and controlled via the Web UI of BeSpoon RTLS or via another application based on a compatible session protocol. For more information, please refer to the corresponding documentation. It can be either the documentation included in the RTLS DELIVERY Pack or the docu-

mentation dedicated to the compatible application. 8 omlox WTag User Guide 5. Ask for support We offer standardized as well as customized solutions. Please note that all documents may be updated without notice to individual customers beforehand. We provide remote assistance by e-mail at bshq@bespoon.com. In case of support request, please indicate your system references. 9 omlox WTag User Guide 17 rue Lac St Andr, btiment Koala Savoie Technolac, BP10402 73372 Le Bourget du Lac CEDEX France

+33 (0)4 58 82 88 88 contact@bespoon.com www.bespoon.com

User Guide OMLOX SMARTANTENNA 2020 BeSpoon SAS The copyrights in this user guide and the system described therein are owned by the company BeSpoon SAS (hereafter also referred as "BeSpoon"). BeSpoon, the BeSpoon logo, omlox and the omlox logo are registered trademarks. All other brand names, product names, or trademarks belong to their respective holders. BeSpoon SAS, company registered at RCS de Chambry Registration number (SIRET) 521 277 319 00039 VAT-No. FR06521277319 Contact information: see back cover. Proprietary Statement/Use This document contains proprietary information of BeSpoon which may not be used, reproduced, or disclosed to any other parties for any other purpose with-

out the express, written permission of BeSpoon. This document has been made available as part of the license that has been granted to an authorized user of BeSpoon software. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Use of this docu-

mentation is subject to the terms and limitations of that license agreement. This document describes all functionality that can be licensed for this product. Not all functionality described in this document may be available to you depending on your license agreement. If you are not aware of the relevant terms of your license agreement, contact sales at BeSpoon. Product Improvements Continuous improvement of products is a policy of BeSpoon SAS. All specifica-

tions and designs are subject to change without notice. Liability Disclaimer BeSpoon takes steps to ensure that its published documentation is correct;

however, errors do occur. BeSpoon reserves the right to correct any such errors and disclaims liability resulting there from. Limitation of Liability In no event shall BeSpoon, any of its licensors or anyone else involved in the creation, production, or delivery of the accompanying product (including hard-

ware and software) be liable for any of the following (collectively referred to as

"Injuries"): injuries (including death) or damages to persons or to property, or damages of any other kind, direct, indirect, special, exemplary, incidental or con-

sequential, including, but not limited to, loss of use, lost profits, lost revenues, loss of data, business interruption, replacement costs, debt service or rental pay-

ments, or damages owing by you to others, whether arising out of contract, tort, strict liability or otherwise, arising from or relating to the design, use (or inability to use) or operation of these materials, the software, documentation, hardware, or from any services provided by BeSpoon (whether or not BeSpoon or its licen-

sors knew or should have known of the possibility of any such Injuries) even if a remedy set forth herein is found to have failed of its essential purpose. Some ju-

risdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Table of contents 1. Introduction 2. Safety and compliance information 3. Specification 3.1. Datasheet 3.2. Hardware overview 3.3. Equipment needs 4. Deployment instructions 4.1. omlox SmartAntenna mounting (optional) 4.2. omlox SmartAntenna start 4.3. omlox SmartAntenna placement 4.4. omlox SmartAntenna control 5. Ask for support 1 2 4 4 5 5 6 6 6 6 7 7 1. Introduction omlox SmartAntenna is part of BeSpoon RTLS, a real-time locating system which uses Ultra-Wideband (UWB) pulses for real-time 3D location of objects in buildings in various industries. omlox SmartAntennas are mainly used as mobile devices while omlox Satellites are used as fixed bases in BeSpoon RTLS. In this case, the omlox Satellites are synchronized with eachother. The mobile devices, such as omlox WTags or om-

lox SmartAntennas are tracked in two modes which can coexist: Multi-Tag Track-

ing (server-centric) and GPS-like Positioning (device-centric). omlox SmartAntennas may also be provided as part of special mobile kits without omlox Satellites and without server. In this case, BeSpoon RTLS works in a particular device-centric mode, called Single Self-Positioning: only 1 omlox mobile device is tracked, the others are used as fixed bases (then, unlike in the main configuration, the fixed bases are not synchronized). BeSpoon RTLS overview - main configuration omlox satellites x, y, z x, y, z device and server-centric mobile devices location server BeSpoon RTLS overview - omlox mobile kits x, y, z x, y, z x, y, z This document includes regulatory information, as well as a detailed hardware specification and a description of its features. For detailed features and user instructions regarding the complete system, please refer to the BeSpoon RTLS documentation included in the RTLS DELIVERY Pack. The RTLS DELIVERY Pack includes documentation and the related software toolchain, to make the development processes easier. It contents evolves according to BeSpoon RTLS developments. 1 omlox SmartAntenna User Guide 2. Safety and compliance information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that in-

terference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that Consult the dealer or an experienced radio/TV technician for help. to which the receiver is connected. CAUTION BeSpoon RTLS equipments are configured to cover only the area inside buildings, preventing omlox SmartAntennas and other UWB devices of the system from emitting UWB signals outdoors. Contact your system administrator if you are unsure as to the extent of coverage. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. omlox SmartAntennas and the real-time location system BeSpoon RTLS may only be operated by qualified adult individuals. Installation and operation in childcare facilities and other places hosting children is prohibited. Any changes or modifications not expressly approved by BeSpoon could void the user's authority to operate this equipment. 2 omlox SmartAntenna User Guide Opening the casing of an omlox SmartAntenna and/or replacing any of its component is prohibited. omlox SmartAntennas only operate (i.e. receive and transmit UWB signals) within a complete UWB real-time location system BeSpoon RTLS, which must be professionally installed. In case omlox SmartAntennas must be disposed of, they must be collected in compliance with Directive 2012/19/EU (Waste of Electrical and Electronic Equipment). 3 omlox SmartAntenna User Guide EU Conformity Declaration 4 omlox SmartAntenna User GuidePROVISORY FORMPROVISORY FORMTO BE UPDATED WITH FINAL SCANTO BE UPDATED WITH FINAL SCAN 3. Specification 3.1. Datasheet Technology information BLE UWB Data connections Bluetooth, UART, UWB Frequency band : [2402 2480] MHz Max power (EIRP) : 4dBm Frequency band : [3250 4750] MHz Max Mean power (EIRP) : -41.3dBm/MHz Status Starting Supplied Scanning Calibrating Ranging 5 Dimensions 59 x 47 x 19 mm Power supply type USB C cable Power supply values Typ.: 5V (USB) Min.: 4.35V Max.: 5.5V Max. charging current default: 100 mA adjustable to user requirements Operating temperature range

-20 to 55C Storage temperature range

-20 to 25C IP code 64 Pre-programmed Unique ID 64 bits Light indicators see table below Light indicators LED Color Lighting details Point form LED and wave form LED 3 colors

(green, orange, red) All colors one after another, 500ms each Point form LED Orange Continuous Temperature protection Wave form LED Green Fast blink (every 200 ms) Slow breath Fast blink Blink every 3s omlox SmartAntenna User Guide 3.2. Hardware overview front view back view point form led

(power supply) wave form led

(activity) USB C connector side view base view individual label individual label symbols 3 screw thread inserts CE certification mark WEEE symbol Directive 2012/19/EU 3.3. Equipment needs BeSpoon RTLS main configuration (omlox Satellites used as fixed bases) Full system equipment such as defined at section 3.4. of the document omloxSatellite_UserGuide.pdf Wireless charging devices Optional mounting screws Type: M3 diameter, minimum length 8mm e.g. Phillips Pozidriv Recess Countersunk Head, DIN 96 - White Zinc Steel 6 omlox SmartAntenna User Guide BeSpoon RTLS mobile kits (mobile devices as fixed bases) At least 5 mobile devices Wireless charging devices and/or USB C cables Optional mounting screws Type: M3 diameter, minimum length 8mm e.g. Phillips Pozidriv Recess Countersunk Head, DIN 96 - White Zinc Steel Android tablet or smartphone PC (if UART transmission only) 4. Deployment instructions 4.1. omlox SmartAntenna mounting (optional) If you need to fix the omlox SmartAntenna, 3 screw thread inserts are included in the device's base. see illustration at section 3.2 Use all 3 screw thread inserts for each omlox SmartAntenna. Warning: the equipment should not be used in places hosting children. 4.2. omlox SmartAntenna start omlox SmartAntenna starts as soon the USB C cable is plugged and the board is supplied with power. see table of light indicators at section 3.1 4.3. omlox SmartAntenna placement One simple golden rule ensures the best results when it comes to the deployment: avoid UWB signal deterioration and reflection by maximizing Line of Sight links (LoS) among all the devices included in the system. LoS matters among omlox Satellites for the quality of synchronization. Of course, it also matters between omlox Satellites and SmartAntennas for the location precision. Short animation sequences summarizing the points to pay attention to (online content) UWB synchronization Non-Line of Sight Examples Dilution of precision How to place fixed devices 7 omlox SmartAntenna User Guide 4.4. omlox SmartAntenna control omlox SmartAntennas are configured and controlled via the Web UI of BeSpoon RTLS or via another application based on a compatible session protocol. For more information, please refer to the corresponding documentation. It can be either the documentation included in the RTLS DELIVERY Pack or the docu-

mentation dedicated to the compatible application. 5. Ask for support We offer standardized as well as customized solutions. Please note that all documents may be updated without notice to individual customers beforehand. We provide remote assistance by e-mail at bshq@bespoon.com. In case of support request, please indicate your system references. 8 omlox SmartAntenna User Guide 17 rue Lac St Andr, btiment Koala Savoie Technolac, BP10402 73372 Le Bourget du Lac CEDEX France

+33 (0)4 58 82 88 88 contact@bespoon.com www.bespoon.com

PHOENIX TESTLAB ifm] OMLOX CE &

' WTAG IP64

. 7E49:F9EA:385E:288D BeSpoon SAS, 17 rue du Lac St Andr ol 73370 Le Bourget du Lac, FRANCE FCC ID: 2AVYU-OMLOX-ST fz] OMLOX CE a SMARTANTENNA IP64 a 7E49:F9EA:385E:288D BeSpoon SAS, 17 rue du Lac St Andr ol 73370 Le Bourget du Lac, FRANCE FCC ID: 2AVYU-OMLOX-ST 846] BeSpcon n MAC x [E) 7083:D50F:7030:0188

Federal Communications Commission 45 L Street NE Washington, DC 20554 United States of America 10 May 2021 Long/Short-term Confidentiality Request FCC ID: 2AVYU-OMLOX-ST To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the Grantee hereby information long-term confidential requests accompanying this application as outlined below:

treatment of Schematics Block Diagram Operational Description Parts List Tune-Up Info In addition, the Grantee hereby requests the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure for an initial period of days until:

not applicable External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Grantee understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Sabrina Berghahn

(Authorized Agent)

BeSpcon Hevel tracking PHOENIX TESTLAB GmbH Product Certification Department Koenigswinkel 10 32825 Blomberg, Germany Power of Attorney Please be advised that we, Be Spoon SAS., authorize the following persans from PHOENIX TESTLAB GmbH:

To VVhom It May Concern Sabrina Berghahn to act on our behalf in all matters relating to application for equipment authorization, including the signing of ail documents relating to these matters in the following countries:

USA PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following name device:

Product description: VVtag & Smart Antenna FOC ID: 2AVYU-OMLOX-ST Unless future correspondence from BeSpoon please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the above mentioned products to 6 months after the signatory date of this authorization. Contact persan Position in the Date of signat Mr. Jean-Marie Andr ompany Chief Executive Officer 04/01/2020 Signato

(signature of Becte SIREN:5 21277319 Be Spoon S.A.S. 17 alle Lac St-Andr, bt. Koala - Savoie Technolac BP10402 - 73372 Le Bourget du Lac Cedex - France

+33 4 58 82 88 88 - contactebespoon.com - vvww.bespoon.com SIRET 521 277 319 00039 -VAT-No. FR06521277319

BeSpoon SmartAntenna vs Wtag Product differences Presentation:

BeSpoon SmartAntenna and Wtag are 2 products based on the same bare PCB

-> Electrical schematics are the same for both

-> The Bill-of-material is different For power supply:

Wtag has a Battery and a Wireless Charging system for it. SmartAntenna has a USB-C connector Plastics for SmartAntenna adds an opening for USB-C connector and screws inserts SmartAntenna PCB top Wtag PCB top No differences SmartAntenna PCB bottom Wtag PCB bottom Wireless-Charging circuit WC-coil connector NC NC NC Battery connector USB-C connector NC SmartAntenna Extra connections NONE Wtag Extra connections Battery WC-coil SmartAntenna Integration in Plastics Wtag Integration in Plastics Screw inserts Hole for USB-C connector