T-51 Power Armor Helmet Gesture Control Speaker User Manual Introduction:
Thank you for purchasing your T-51 Power Armor Helmet Gesture Control Speaker. Please take a few minutes to look through this user manual. Model #: BTHDEV180318 2018 Bethesda Softworks LLC, a ZeniMax Media company. ZeniMax, Bethesda, id Software, Rage and related logos are registered trademarks or trademarks of ZeniMax Media Inc. and/or its affiliates in the U.S. and/or other countries. All Rights Reserved. Licensed for use by by 2018 Development Plus, Inc. 250 Bel Marin Keys Blvd., Bldg. F Suite 300 Novato, CA 94949 Contents:
1 T-51 Power Armor Helmet Gesture Control Speaker 1 USB cable Specifications:
USB port 5V power input (5V /1.5A) Gesture control sensor blue-tooth compatible Product Components Introduction:
Gesture Control Sensor Micro USB Port 3-Way Switch Powering on your speaker:
Plug in the included USB cable to the back of the unit and into a USB port to power up the unit. Switch the 3-way switch located on the back of the unit to either On or Gesture. A flashing blue light indicates that the speaker is on and while getting ready to pair the speaker will play a short audio intro. Enable blue-tooth pairing on your smart phone to search T-51 speaker. Once successfully paired you will hear a connection sound effect to ensure you are connected. In the ON position use your paired device to control the speakers functions. Note: In the ON position gesture controls are not active. Gesture control sensor:
When gesture mode is enabled using the three way switch, the sensor is on, and motion detection is ready. Moving your hand beyond the sensor:
From left to right ~ music Forward From right to left ~ music backward From up to down ~ volume down From down to up ~ volume up FCC ID: 2AI8LBTHDEV180318 NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. WARNING: This is not a toy. Contains small parts. Not intended for children under 17 years of age. Warranty: 180 days limited warranty against manufacturing defects. Made in China.