FCC ID: EZO5PQ5290 Model 5298 Pin & Proximity Reader

by: Bewator Ltd. latest update: 2000-03-13 model: 5PQ5290

One grant has been issued under this FCC ID on 03/13/2000 (this is one of three releases in 2000 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked warrantee terms, instructions, drivers, troubleshooting guides, & password defaults.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 4
1 ~ 2000-03-13 4

app s				submitted / available
1	Installation Note	Users Manual	pdf	9.88 KiB	January 03 2000
1		Parts List/Tune Up Info	pdf		January 03 2000
1		Test Report	pdf		January 03 2000
1		Cover Letter(s)	pdf		January 03 2000

exhibit
download
text

Installation Note

Users Manual

pdf

9.88 KiB

January 03 2000

Installation Note 5298 PIN & Proximity Reader IN062 Mounting, connecting and setting up Mount the 5298 Reader in a suitable position near the door approximately 1.2m from the floor. The Reader has a mounting plate with two mounting holes which are suitable for most installations. 1. If the Reader is fixed to the mounting plate, undo the two screws which are at the top right and bottom left of the keypad, then place the mounting plate in position on the wall or door frame and mark the position of the two mounting holes - these are the two oval holes in the mounting plate. 2. Drill the two mounting holes. The holes accept 3.5mm machine screws or No 6 wood screws. 3. The connections are made to CONN1 on the rear of the Reader. Pass the cable through the large hole in the centre of the mounting plate and make the connections shown in the following table as required. CONN1 1 Name V+

2 3 4 5 6 7 8 9 0V H Horn R R/G D0 D1 DA Function Power supply +V (+ve)

*(see below for voltage range in each jumper setting) Power supply 0V (-ve),

(also ground reference for data output) Data Hold for Wiegand output (+5V max) Horn - 0V to sound, +5V to turn off Red LED control - 0V for red LED Single wire LED control 0V for green LED, +5V for red LED

(red and green LEDs on together give amber) Data zero for Wiegand output Data one for Wiegand output Data Available for Wiegand output

*Jumper JU1 on the circuit board determines the range of voltage which can be used to power the Reader as shown in the following table. JU1 24 5/15 Power supply voltage range unregulated DC: max 35.0V*, min 15.6V, 100mA max unregulated DC: max 15.6V, min 4.0V, 100mA max

*If you are using a power supply at or near the 35V maximum, the ambient temperature of the environment where the Reader is installed must not exceed 55oC. IN062 - Issue 1A October 1999 - Page 1 of 2 4. 5. 6. 7. 8. Note: do not apply a voltage greater than +5V to the data hold input, the horn input, or the LED inputs Remove the protective label from the horn on the back of the Reader. Route the cable tidily, then screw the mounting plate to the wall or door frame, and screw the Reader to the mounting plate. If the 5298 Reader has been configured by your supplier, you can power it up and test it, see step 8. If you need to configure the 5298 Reader yourself, power it up and present the configuration card to the Reader within 4 seconds of power up. During this 4 second period, the LED indicator on the Reader is green. After reading the configuration card, the Reader bleeps and the LED lights amber for a short period before returning to green. The Reader now gives you a further 8 seconds to present one of the normal programmed cards which will be used with the system. Doing this teaches the Reader its Distributor and Secondary Codes. After configuring the Reader, test it by presenting a valid card. The Readers red LED should go out and the host should receive the card data output. Each key-press should give an amber flash and a horn bleep, and the host should receive PIN data. For more information on the 5298 PIN & Proximity Reader, please see the 5298 PIN

& Proximity Reader Handbook HB02/96. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. FCC Statement IN062 - Issue 1A October 1999 - Page 2 of 2

		frequency	equipment class	purpose
1	2000-03-13	0.13 ~ 0.134	DCD - Part 15 Low Power Transmitter Below 1705 kHz	Class II permissive change or modification of presently authorized equipment

Application Forms

app s	Applicant Information
1	Effective	2000-03-13
1	Applicant's complete, legal business name	Bewator Ltd.
1	FCC Registration Number (FRN)	0007064165
1	Physical Address	P.O. Box 1475
1		1475
1		Englundavagen 7, Solna, N/A SE-17128
1		Sweden

app s	TCB Information
		n/a

app s	FCC ID
1	Grantee Code	EZO
1	Equipment Product Code	5PQ5290

app s	Person at the applicant's address to receive grant or for contact
1	Name	C**** L****
1	Title	Vice President, Operations
1	Telephone Number	468-6********
1	Fax Number	468-6********
1	E-mail	c******@bewator.se

app s	Technical Contact
1	Firm Name	Bewator-Cotag
1	Name	M** J** Y******
1	Physical Address	Mercers Row
1		Cambridge, CB5 8EX
1		United Kingdom
1	Telephone Number	44-12********
1	Fax Number	44-12********
1	E-mail	m******@cotag.com

app s	Non Technical Contact
1	Firm Name	Bewator-Cotag
1	Name	M** J** Y****
1	Physical Address	Mercers Row
1		Cambridge, CB5 8EX
1		United Kingdom
1	Telephone Number	44-12********
1	Fax Number	44-12********
1	E-mail	m******@cotag.com

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DCD - Part 15 Low Power Transmitter Below 1705 kHz
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Model 5298 Pin & Proximity Reader
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	DB Technology
1	Name	D****** S******
1	Telephone Number	44-19********
1	Fax Number	44-19********
1	E-mail	m******@dbtechnology.co.uk

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		0.13000000	0.13400000		%

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BFGFWTX1 WaveInnova Inc 2BF7L-BD002 BADI TOYS FACTORY 2A9OO-U2600S Ultimea Technology (Shenzhen) Limited POUMTK952N-0W2 Wisycom s.r.l. POUMTK952N-2W0 Wisycom s.r.l.