1.Notice 1.1 Information Instruction . The navigation system adopts the most advanced satellite navigation technology and detailed street map so it can direct you to the destination easily. In order to let you obtain the best capabilities of the new system, please read the instruction before operating. Illustration Warning Users shall comply with the information provided in case of any threat to personal safety. Warning Caution Users shall comply with the information provided in case of any damage to this device. Caution Tips Additional information provided for user`s reference. Tips Global Positioning System is launched and maintained by USA. This system can receive the satellite signals from Global Orientation System. Using these signals and vehicle inductor, the system can indicate current location and help you find required destinations. This navigation system can select an economical route, which isn't always the shortest routes or jam-free. Generally speaking, the driver can reach the required destination faster with his local knowledge or shortcut rather than this system. This navigation system can provide visual map and voice instruction. When you are at the crossing or near the turnoff, the device will remind you of the driving distance and direction. 1.2 Safety Information .
-1-
using the system. 2. As the system will distract the drivers' attention, in order to keep safety and prevent from accidents, drivers shall not operate the system while driving. 3. Shall not only depend on the voice navigation which is only for reference. Because the roads circs, traffic signs and service information aren't always latest, drivers should update maps timely. 4. There are shortages of system data, for example, roads circs may change frequently;
therefore, you must notice traffic circs before following the system information. 5. This navigation system is only used for assisting drivers to make a judgment, and may not measure any direction, distance, place, or landform precisely. 1.3 Safety Caution . In order to prevent users or others from injury or property loss, please read and follow the cautions in below:
1. Read instruction 2. Keep the instruction properly for later reference 3. Obey all operation instructions 4. Accessories Don't use the accessories from another manufacturer, otherwise it may cause accidents. 5. Power Please use the stated power. You must cut off the power and pull off the power plug in rainy days or when you won't use it for a long time. 6. Protect power cord Make sure the power cord is out of feet touch. 7. Installation and wiring In order to ensure safety, please consign professionals to carry out the installation and wiring. 8. Maintenance and parts change Please consign professional technician to maintain and change. 9. Keep away from heat source Please don't expose the device in sunshine or high temperature. Keep it away from heat, such as heating machine, heater or any other heating objects. 10. Keep away from water or damp place Please don't expose this device in rainy or damp conditions. 11. Cleanness Please wipe the device with dry and soft cloth after power-off, the volatile chemicals, such as gas or diluting agent. 12. Please cut off power and contact with technician immediately in the following conditions:
-2-
Time for charging: 3~3.5hrs under standby mode, the time will be different in different surroundings, the unit can also be charged when power on, but the time shall be longer, it is normal that the unit heat while charging. 7. What advantages of your GPS solution have?
It supports quick global positioning, stable signals, free of service, detailed map for each city, voice navigation for the whole journey, intelligent lay out the route, operation system of Microsoft windows CE.net, 3.5 inch TFT touch screen with 65k colors internal GPS and high capacity rechargeable LI-polymer battery
. 8. Normally, how many satellites can GPS receiver capture?
Normally, most GPS receivers can capture 8-12 satellites. 9. Will the music be distorted if the volume is too high? Sometimes WMA files can not be played, why?
Please make sure whether the music is obtained legally? If not it must be of big noise. WMA files has copyright protecting, it needs to be decoded by decoding software during operation. 10. How to avoid device crashing at the moment of car starting up?
Users must note that do not connect the GPS with the linker until the car is started up. Liquid or particle enters into the device;
The device is damaged due to falling off from a high place or incorrect operation;
13. LCD Prevent LCD from being crashed or fallen, don't touch the liquid flowing out of the device; don't heat LCD or scratch it. 1.4 Special Tips . 1. Whether the positioning and use of GPS can be affected by the weather or anything else?
Yes, lightning, climate (overcast, rainy and cloudy) etc., all may affect the signals and use of GPS. 2. What factors may affect the signals of GPS?
1).SA satellite message is from DOD in USA. The precision of GPS signal is directly controlled by DOD in USA, in order to ensure security, the signal precision for civilian use is lower than that for army, so in some sensitive places, military base for example, the signals can be interfered and the precision of positioning may be reduced. 2).Weather factors (macula, bad weather may reduce the intensity of signals and result in instable orientation.) 3). Electric, electromagnetism, wireless wave and strong magnetic field all has different certain interference. 4).Under veils, such as buildings, cars, heat insulation papers, metal veils and trees, they all may reduce the signals of GPS, therefore, place the device close to the windshield. 3. Why does not GPS receive signals in buildings?
The signals can be obstructed easily by buildings and metals, and they can't penetrate through the wall of buildings, so the GPS can't be used in buildings. 4. Does the sun membrane affect the signals of GPS?
It will have certain effect on GPS when the material of sun membrane contains metal. 5. How long does the GPS take to position after power on?
About 1 minute the GPS begins to positioning if it is located in wide and non-
interference places, less than or equal to 5 minutes is in accordance with the standard of GB/T 19392-2003-5.3. 6. What is the maximum navigation time? How long does it take to charge up?
Maximum navigation time: 3~4hrs with volume and brightness at 50%.
-3-
-4-
2.Brief Introduction Navigation 2.1 Function Introduction .
>GPS
>Bluetooth
>TMC
>AV IN
>Support Micro SD card 2.2 Accessories . Before using, please make sure whether the device and accessories are complete, if there is any lack or damage please contact with the local dealer or agent as soon as possible.
>PND 1pcs
>USB Cable 1pcs
>Car mount 1pcs
>User Manual 1pcs 2.3 Illustration . 1.Hot key, power indicator (Power supply controlled by vibration sensors) 2.Reset 3.Display on/off key, indicator (when Bluetooth working) 4.Display screen 5.Microphone 6.Mini USB hole 7.Micro SD card slot 8.Speaker 9.Battery switch 10.Mirror
-5-
-6-
3.Basic Operation 3.1 Battery and Charger . 1 Power Supply In-vehicle/portable GPS navigation has two ways of power supply: battery supply and power supply. When the device doesn't connect with the adaptor, it is supplied by the lithium battery. The icon at the top right corner on the main interface of system indicates the current remaining power. When the device connects with the adaptor, it is supplied by the outer power. Tips Under normal condition(volume and backlight at 50 ), it can last about some hours after the battery is fully charged. Some functions need to consume a lot of battery energy, such as audio/Movie playing, high backlight and Bluetooth, which may Tips 3.2 Basic Use . 1 Reset Key When the system halted or in the following cases, press reset key to reboot the system:
1. There are delay and stagnation during switch interface;
2. There is no response when click the icons. 3. Power key is unavailable. Caution Please backup the data before resetting the system. Caution 2 Car Mount The car mount consists of salver and bracket. While using the device in car the device should be fixed in the proper position of fore-windshield. 3 Micro SD Memory Card Correctly insert SD/SDHC/MMC card into the slot, and do not remove the SD/SDHC/MMC card during operation. 3.3 Connection with Computer . Connect the device with computer by the USB cable. One end connects with PC and the other end connects with the device. 1. Data transmission: There are two new "mobile disk" icons in my computer after the device is successfully connected with computer, the first icon stands for the built-in flash memory of the device, the second stands for the SD card storage of the device. (If the SD card is not inserted, the second icon of the disk is unavailable). Then, you can use them as normal USB flash disk. Caution Caution 1. Please do not delete and revise the data in the built-in flash memory of the device, in case some functions of the device are out of work. 2. Based on Windows 98 operation system, please install the driver before operating the device. The operation of communication between GPS and computer are exampled based on the Windows 98 operation system or above version. 3.When GPS is connecting with computer by USB line, it can not operate the current functions. 2.Safely Remove: Please remove the USB line after finishing the data transmission (just operate it as the USB flash disk). 4.Hot key Screen rotate 180 degree. Enter to screen saver, click to screen and then return to window. Enter to setting interface. Enter to Bluetooth setting. Change from internal speaker to external speaker.
-7-
-8-
5.Function operation The device supports navigation and Bluetooth for hands-free and system setting functions. The main interface is as follows:
5.1 Navigation . The Features of Navigation The device adopts intelligent navigation system, which uses GPS satellite signal receiver to positioning the mobile vehicle precisely and displayed the mobile vehicle's location on the E-map. The system will automatically calculate the best route when users set the destination, it will help the users reach their destinations safely and quickly. The system also can provide the functions of visual maps, instant cartoon, voice and instruction and so on. 5.2 Bluetooth
. Press Bluetooth to enter the menu of Bluetooth.
Return Return to previous menu Displaying area for searching time Tips 1. Bluetooth of mobile phone should be opened at the same time. Tips 2 Dial Function Click the icon to open the dial key. Return :Return to Bluetooth interface
+ : Volume
- : Volume Dial key: Click it before calling Hung-up key: Click it after calling Back space key: Delete the last number of inputted phone code Number keyboard: Input number Number display area: The current called number Tips when the icon at the left corner of interface shows red, it means the Bluetooth is not connected, if it shows green, it means the Bluetooth has been connected. Tips 1 Bluetooth pair Click the icon to enter into the equipment pair interface. Before using Bluetooth, it should be matched. Click the icon to enter into the pair waiting interface, and then use mobile phone to search for Bluetooth equipment, after finding out the Bluetooth equipment, input a pair password in mobile phone, the password can be found in the pair password setting interface. If connect successfully, Pair Success will go back to main interface after 60 seconds. will appear on the screen, or the interface
-9-
3 Call record Click the icon "Call Record" to open call log. Return to previous menu Check dialed numbers Check received calls Check missed calls Check previous record Check next record Dial the chose number or switch into dialing key Delete the chose records Delete all records Record of calls
-10-
4 Dial-last Click the Dial-last
entering into this interface, please operate other function according to 5.2.2 icon, it will switch into the last dialed call automatically. After
5 Bluetooth password Click
" Attribute "
icon to enter into the interface of password setting. Return to previous menu Show the name of current Bluetooth equipment Show the password of Bluetooth equipment Revise password exiting the B luetooth in terface m ean a nswer t he c all a utomatically m ean t he B luetooth is s till w orking a fter Click to enter into the password setting interface. Return to previous Esc Clear Display area of matching password Number keyboard 6 Bluetooth connection Click icon to enter Bluetooth connection record. Return to previous menu Select the previous pair Select next pair Delete all records Disconnect Bluetooth device Connect with the selected Bluetooth device Displaying area for connecting Bluetooth device 5.3 System Setting . Click "Setting" icon on the main interface to set your system, including volume, power, Backlight, Date time, language, system information. 1 Adjust the volume Click the "Volume" icon to enter the related interface Users can click and on the screen to adjust the volume, by clicking and on the screen which is in front of "Enable sounds for taps" to decide whether the screen makes a sound or not. 2 Power Click "power" icon to enter the battery level interface. 3 Backlight Setting Click "Backlight" to enter backlight setting interface. Day time ba cklight setting , set day tim e started at XX:XX by Night time backlight setting , set night time started at XX:XX by user can adjust the backlight by The end user can press the sun or moon touch icon to set the morning and night model priority. 4 Date Time Setting Click "Date Time" to enter date time setting interface. Status bar will show the current separately time, date and time zone. Separately click "Time", "Date", "Zone" to set up the time, date and time zone. Through the GPS signals, the time setting refreshes the current time automatically, it means that the time will temporarily return to the factory setting time after the system reset. As soon as the GPS begins to navigate, the time will renew to the standard time. Please note that the time setting should be compatible with the local time. 5 Language setting Click Language icon to set the language you need.
-11-
-12-
6 System Information Click Sys Info. icon to view the detailed system information. 1. Click Calibration icon at the left corner of information box to adjust the touch screen. click the middle of cursor until the calibration is successful. Choose to move the cursor through middle, left, right, up,down steps. Repeat 2. Click "Factory Reset" icon at the right corner of information box, the system will automatically return to the factory setting. 3. Click "GPS Reset" icon in the middle of information box, the system will automatically clear up the Signal-
to-Noise data received. Signal-to-Noise data Latitude Speed Channel Altitude Positioning time Longitude Satellite No Tips When you enter this interface to search for GPS singal, if you find the searching speed is slow or you can not get singnal after a long time, please click on the "GPS Reset" key to refresh GPS singal. 6.Malfunction Analysis If the device does not work smoothly, please inspect it according to the following method. If problems still exist, please connect our Service Centre timely. Problem Can not power on Power off suddenly Reason Low power Low power Method Charge the battery Charge the battery Touch screen deflected Calibration is not precise. Refer to 4.6.6 to calibrate your touch screen. No sound when playing Tool low volume Turn on the volume Can`t connect with PC Can not charge Touch screen and display abnormal Can not receive GPS signal Map data missing Poor connection of the USB cable Refer to the 2.3 chapter, connect the USB cable well. Power cable is not connect well Please check cable, make sure the polarity is right The system crashes Press the reset key Depending on the intensity of the local signals. It will take about 1 minute to receive the signal. Copy the map data into the SD card again. Contact with local retailer or distributor. You need to enter the activated password when you use the device again.
-13-
-14-
7.Technical Specification Windows CE6.0 SiRFAtlas IV, CPU 500MHz RAM11; DSP 250MHz. 128MB DDR 16-bit data@266MHz SLC:64MB-512MB MLC:1GB-4GB MAX 8G Micro SD English, Italian, French, Spanish, German, Portuguese, Dutch, Russian, Polish, Hungarian, Serbian, Romanian. More languages can be added, as request) The power supply controlled by the vibration sensors. The power cable should be connected with car battery, Voltage:input DC 12V--24V 3.7V /1600mAH 2.5~3.5 hours with 50% volume and backlight. Picture rotation 180 (b y so ftware), sc reen is on left side default 3.5 TFT in rearview mirror, capacitive screen 320*240 (RGB), 65K colors 1575.42MHz 64 channels
-161dBm Position: < 10 meters Hot start: 3 sec, average Warm start: 38 sec, average Cold start: 45 sec, average 1/second COM7 Optional Bluetooth V2.0, handfree mobile phone+vanish echo Update the map data in SD card CVBS(PAL&NTSC) 75 1.5Vpp Analog Signal
-10 ~55
-20 ~70 Short-term storage -25 ~75 , Dimension Net Weight System 270*93*15mm About 340g OS CPU Frequency DDR NAND Flash External Memory Languages Multi-languages Car power supply Battery Navigation time Picture Specification Pixel Frequency Channels Sensitivity Precision Start-up time Refreshing rate Port External TMC function Built-in bluetooth Map Movie format Input impedance Input voltage Audio format Operation Temperature Storage Temperature USB 2.0 high speed Power supply Display GPS Module TMC Bluetooth Version update AVIN Temperature USB
-15-