How to Program Features To access Features Programming Mode:
Step 1: Turn the vehicle's ignition "On" then "Off". Step 2: Within 7 seconds of turning the ignition "Off", press the Valet Switch 5 times. The siren will wolf once confirming entry to Features Programming Mode. Step 3: Within 10 seconds of entering Features Programming Mode, press the Valet Switch the number of times equal to the number of the feature to be programmed. The siren will repeat the feature number with chirps to confirm. Step 4: After the system acknowledges the feature to be programmed:
- press the Lock button on the remote to turn the feature ON (the siren will chirp once), or,
- press the Unlock Button to turn feature OFF (siren will chirp twice). Note: Once the feature to be programed is selected, you can toggle the feature between its settings by pressing the Lock & Unlock buttons on the remote control.
- To program more features, simply repeat Steps 3 and 4.
- If 10 seconds expire without any programming activity, or if the vehicles igni-
tion is turned On, the alarm will automatically exit Features Programming Mode. The siren will confirm exit. Programmable Features The alarm has 15 programmable features which allow it to be customized to suite many individual needs. The following pages provide a brief explanation for each feature, and notes its factory default setting.
= Default Factory Setting 1. Auto-Rearm: ( On = 1 siren chirp / Off = 2 chirps)
- Allows the Alarm to Rearm itself, if it is Disarmed. 2. Last Door Arming: (On = 1 siren chirp / Off =2 chirps)
- Configures the alarm to automatically arm itself 30 seconds after the last door is closed with the ignition Off. 3. Doors Lock w/ Last Door Arming: (On = 1 siren chirp /Off = 2 chirps)
- Adds the automatic locking of the vehicle's doors to the previous feature. Page 10 4. Double Pulse Unlock: ( 2 pulses = 1 siren chirp / 1 pulse = 2 chirps)
- Sets alarm to give 2 unlock pulses upon Disarm for cars that require it. 5. Immobilizer Mode: ( On = 1 siren chirp / Off = 2 chirps)
- If this mode is programmed On, the starter interrupt will remain engaged after the alarm is Disarmed, until the vehicles ignition is turned On and you Press &
Release the Valet button.
- Anti-Carjack: Upon disarming the Immobilizer mode, ignition activated anti-
carjacking will be automatically cancelled, (if programmed On).
- Remote Control Programming Mode: Immobilizer mode must be disarmed before entering remote control programming mode. 6. Siren & Horn or Horn: ( Siren & Horn = 1 siren chirp / Horn = 2 chirps)
- This feature configures the alarms Brown/White Horn-Honk output wire. This wire can be configured to honk the horn in addition to the Brown wire operating the siren, or take over all of the Sirens functions SO THAT NO SIREN IS NECESSARY.
- If Siren & Horn are selected: The horn will honk in addition to siren sounding only when the door, pin-switch, or ignition zones are violated. (The horn will not honk if alarm is triggered by the sensor zone, or during confirmation chirps)
- If Only Horn is selected: The car horn will replace the siren and perform all of its functions. NOTE: Brown Siren wire will still be fully active & operational. 7. Shock Sensor False-Alarm Bypass: (On = 1 siren chirp / Off = 2 chirps)
- This feature will temporarily turn Off the shock sensor & pre-warn zone if:
a. The pre-warn is triggered 10 times while the alarm is Armed. b. The instant trigger zone is triggered 5 times while the alarm is Armed.
- The by-passed zones will be reinstated the next time the alarm is Armed. 8. Dome-Light Delay Bypass: (On = 1 siren chirp / Off = 2 chirps)
- This feature will turn Off the 3-chirp open zone warning when Arming the alarm with the remote control. This is for use in vehicles that keep the dome-light illuminated after the doors have been closed. 9. Ignition Activated Anti-Carjacking: (On = 1 siren chirp / Off = 2 chirps)
- This feature turns the alarms Ignition Anti-Carjacking feature On or Off. 10. Remote & Door Activated Anti-Carjacking: (On = 1 chirp / Off = 2 chirps)
- This feature turns both the alarms Remote Control and Open Door activated Anti-Carjacking features On or Off. Page 11 11. Dome-Light or Window Roll-Up: (Dome-Light = 1 siren chirp / Window Roll-UP = 2 chirps)
- Configures the alarms Black/White wire to operate the:
a. Dome-Light: Supply a (-) output when the alarm is Disarmed to illuminate the vehicles Dome-Light for 30 seconds through the use of a relay, or b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when the alarm is Armed to operate a Window Roll-Up module or other accessory. 12. 3rd Channel Output: (Momentary = 1 siren chirp / Window Roll-UP =
2 chirps)
- Configures the alarms Pink wire to operate an:
a. Accessory : Supply a (-) output as long as the small 4th button on the remote control, is pressed & held while the vehicles ignition is Off, (max 30 seconds). b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when the alarm is Armed to operate a Window Roll-Up module or other accessory. 13. Ignition Door Lock/Unlock: (On = 1 siren chirp / Off = 2 chirps)
- Configures the alarm to Lock the vehicle's doors when the ignition is turned On and Unlock the vehicles doors when the ignition is turned Off. 14. RFID Add-On to Anti-Hijacking: (On = 1 siren chirp / Off = 2 chirps)
- Adds an RFID layer to both the Ignition & Open Door activated Anti-Hijacking features. (Note: Special RFID remote control required)
-Press hold TX' button 5 seconds,LED will flash,TX'RFID is turned "On".
-Press hold TX' button 5 seconds,LED will solid,TX'RFID is turned "Off". 0.80 Sec 4.0 Sec JUMPER ON SIDE OF ALARM BRAIN:
Lock Pulse Time: ( .80 seconds = Jumper In / 4 seconds = Jumper Out)
- Determines the length of the alarms door lock/unlock pulse output. Page 12