FCC ID: VW2-107377 Handheld RFID reader

Version 1.8 TFor ISO11784 transponders and NFC option User Manual Scan this QR code to check out this user manual in other languages. HHR5000S (Art. no. 107375) Layout 1 2 3 1 2 3 RFID antenna module HHR5000S main module Battery handgrip T HHR5000SN (Art. no. 107337) Layout 1 1 2 3 4 2 RFID antenna module with NFC 3 4 NFC antenna HHR5000S main module Battery handgrip T HHR5000S for Smartphone Keyboard navigation Turn the unit on and off Functional button Read Tags T HHR5000L (Art. no. 107311) Layout 1 2 3 1 2 3 RFID antenna module HHR5000L main module Battery handgrip T HHR5000LN (Art. no. 107374) Layout 1 1 2 3 4 2 RFID antenna module with NFC 2 4 NFC antenna HHR5000L main module Battery handgrip T HHR5000L with LCD Display Keyboard navigation Switches the unit On and if held for more than 3 seconds, off. It is also used to move back to main menu when reading tags. Escape, go to previous menu Select Previous Menu item/field The number 1 and special functions of space, (.), (\) Next Menu item/field Read Tags T

Internal battery charger External battery charger (Art. no. 107421) The External Battery Charger is a battery charging base designed for the HHR5000 battery handgrip It is possible to charge up to two battry packs at the same time It will charge the battery handgrip in approximately 3 hours Charging the HHR5000 Connect the charger power supply to power outlet and attach the charger plate to the HHR5000 body Status LED on the HHR5000 will flash up in green color every 6 seconds and charging will begin When charging is done, the charging light will turn off. After charging, disconnect the charger plate from HHR5000 and unplug the charger. T Charging the HHR5000 Charging the battery handgrip Connect the charger power supply to power outlet and insert the DC plug of the power supply into the External Battery Charger Note!

Note!

If the red light will light up charging is not possible. If the red light will light up charging is not possible. Disconnect the battery and reconnect again. If the Disconnect the battery and reconnect again. If the red light is still on, the battery is wornout or red light is still on, the battery is wornout or damaged. damaged. Power light will light up in green color Caution Caution Insert the battery handgrip into charger until it stops Use only the AC adapter specified for this Use only the AC adapter specified for this product product When the battery handgrip is inserted, the green charging light will light up and charging will begin Once fully charged, the green charging light will automatically turn off After charging, remove the battery handgrip from charger and unplug the charger To reduce risk of injury, charge only oryginal To reduce risk of injury, charge only oryginal BioControl type rechargeable batteries. Other BioControl type rechargeable batteries. Other types of batteries may burst causing personal types of batteries may burst causing personal injury and damage injury and damage Do not charge the battery handgrip in presence Do not charge the battery handgrip in presence of flammable liquids or gases of flammable liquids or gases Do not expose charger to rain or snow Do not expose charger to rain or snow T USB connection Bluetooth connection Establishing Connection To connect HHR5000 and PC with USB interface, simply connect HHR and PC with included USB cable A window will automatically open on your computer Click the Open folder to browse files HHR5000 is equiped with a mobile phone application, which supports real time connection To connect the HHR5000 device with the mobile phone application:

1. Turn on the HHR5000 2. Download and run the HHR5000 mobile application 3. The mobile application will automatically connect with your HHR5000 device T Demo Application Main Menu HHR5000 Demo application has 4 menu entries. When the HHR5000 is launched, you will see the following screen. The status bar is at the top of the display. Time, battery status and current connections like Bluetooth are displayed. T Demo Application ISO Reader Menu Read ISO Is used for reading RFID tag after pressing the button. When the device reads a tag, it immediately displays it in a designated field above. Continuous This function turns on continuous reading of transponder, it displays each transponder number in the field and stores it with time stamp in memory. You can break continuous reading by pressing Continuous button. Tuning This function displays tuning parameters of antenna. T Demo Application NFC Reader Menu Read NFC Is used for reading NFC tag after pressing the button. When the device reads a tag, it immediately displays it in a designated field above. Continuous This function turns on continuous reading of NFC transponder, it displays each transponder number in the field and stores it with time stamp in the memory. You can break continuous reading by pressing Continuous button. Read/Write Besides standard tag reading, there is a designated field to enter and store information on the NFC tag. T Demo Application Test Menu ISO Turns on or off continuous reading of RFID transponder NFC Turns on or off continuous reading of NFC transponder LCD Turns off LCD screen, to turn it on press any key on keyboard LEDS Turns LED on or off Buzzer Turns sound buzzer on or off Vibration Turns vibrations on or off T Demo Application Info Menu Tuning status Antenna voltage and tuning values are displayed Battery status Battery voltage and percentage are displayed Bluetooth MAC address and device name are displayed Firmware Current firmware version:

HHR main unit ISO RFID reader NFC - reader Bootloader Enables updating HHR5000 firmware using your computer T Batteries perform best at room temperature. The battery has a stable capacity when temperatures rise, but at lower the temperatures battery life may be reduced. When working in extremely cold conditions, battery performance will improve if you keep the HHR5000 warmer than the surrounding air if it is not being used. (e.g. keeping in a vehicle or in a jacket pocket). HHR5000 Care The rugged design makes the HHR5000 fit for challenging circumstances, but you still need to take care of it. The following instructions will help you get the most out of your HHR5000 in real life circumstances. The body Clean the HHR5000 with a soft cloth dampened with either water or a diluted mild detergent. Note: if a mild detergent is used, carefully rinse with water to ensure all residue is removed. The screen Protect the display from impact, pressure, or abrasive substances that can scratch or crack it. Temperature Even though the HHR5000 is designed to be rugged, do not leave it in direct sunlight or in a vehicle in the sunlight for extended periods. T Specification Battery 2x18650 LiIon batteries in series with protection circuitry Supported tag standards FDX, HDX, B-transponders, NFC Standards ISO11784/5, ISO14443A/B, ISO15693, ISO18000-3 and Tag-it Interface USB, Bluetooth Battery charger output 8,2V/1,3A Battery life 5 years Power supply External wall plug-in 12VDC/3A Operating temperature

-20C / +55C Long term storage temperature 0C / +45C Charging temperature

+5C / +45C Weight HHR5000SN for smart phone w/NFC HHR5000LN with display and NFC

814g 760g Dimensions 63,8x6,7x7,9 cm Shock withstands 2 drops from 1 m Humidity IP67 T

Compliance with national regulations FCC Compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment was tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The radiation is below exemption level for handheld equipment. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly apporoved by the party responsible for compliance could void the users authority to operate the equipment. T Compliance with national regulations ISED Compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Cet appareil comporte un ou plusieurs metteurs/rcepteurs exempts de licence qui sont conformes au(x) RSS exempt(s) de licence de Innovation, Science et Dveloppement conomique Canada (ISDE). Operation is subject to the following two conditions:

Son fonctionnement est soumis aux deux conditions suivantes :

1. This device may not cause interference 1. Cet appareil ne doit pas causer d'interfrence 2. This device must accept any interference, including interference that may cause undesired operation of the device 2. Cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement Note! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Remarque ! Toutes transformations ou modifications non expressment autorises par l'entit responsable de la conformit peuvent faire perdre l'utilisateur son droit de faire fonctionner cet quipement T Safety devices This system is designed to be safe to operate. The safety devices that are installed are there for personal safety and must not be modified, removed, or disconnected. Any modification to the equipment's original design may compromise the personal safety. Consequently, it may also void or limit the warranty. T Warranty Note! BioControl will not take any responsibility for damage resulting from faulty operation, or for improper or inadequate care and maintenance. Note! BioControl will not take any responsibility for any damage resulting from frost. The owner/user must take the necessary measurements to prevent the ambient temperature around the equipment from dropping to or below freezing point Note! Modification may create risks not covered by the original construction. Do not make any modifications which has not been approved by BioControl. T Notes

220 No : HHR5000S Serial No: 2040-2??? C Power SUPPY TAY 1,5A MADE IN AY =a ontains FCC ID: XPYNINAB1 ae Cc

/Content IC: 8595A-NINAB1 Contains seam ntains FCC ID: XPYNINAB1 Co

/Content IC: 8595A-NINAB1 Contains 1890 Rakkestad MADE IN NORWAY FCC ID: VW2-107377 IC: 7523A-107377 CEQ www.biocontrol.no info@biocontrol.no

rH tte]

Nemko North America, Inc 303 River Road Ottawa, Ontario, Canada On our behalf, | appoint Nemko A/S Instituttveien 6 N-2007 Keller Norwa ,, to act as our agen in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application |

not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, |

acknowledge that all responsibility for complying with the terms and conditions for certification, as pecified by Nemko North America Inc., still resides still resides with us. Printead name: Even Janre

A TAR PAeya

[ol @re) alice) Wats) autestadveien 75 1890 Rakkestad ORWAY emko North America, Inc. 303 River Road Ottawa, Ontario, Canada REQUEST FOR CONFIDENTIALITY - FCC CC ID: VW2-107377 ursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT LONG-TERM CONFIDENTIALITY:

Schematics Bill of Materials/Parts List Block Diagrams heory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS Internal Photos External Photos OEY aU lepers]

Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to eae 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made lel=ace)c-) the date of the Grant for this Application. yrs 1e)|

igneda:

Printed name: Even Jahren