all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.23 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.23 MiB |
CAR MULTIMEDIA San Pedro 800 Enjoy it. Operating instructions Manual de instrucciones 8 7 4 DISPLAY button Short press: Adjust the display brightness (4steps) Long press: Switch o the display 5/6 [ + ] / [ - ] Button Adjust volume 7 Next page 8 Touchscreen user interface 9 Microphone Controls Device 9 1 2 3 4 5 6 1
] Button
[
Switching on the device In operation:
Long press: Switches off device
[
2 Mute the Volume
] Button 3 HOME key Short press: Return to home page at any point Long press: Display analog clock 2 Safety notes ................................................................ 4 Symbols used ...........................................................................4 Road safety ................................................................................4 General safety notes ..............................................................4 Declaration of conformity ....................................................4 Placing the device in operation ................................. 5 Switching on/off ......................................................................5 Volume ........................................................................................5 Main menu(Home) .................................................................5 Setting the reception area ...................................................5 Radio mode ................................................................. 5 Start radio mode .....................................................................5 Select memory bank ..............................................................5 Tuning into a station ..............................................................6 Storing stations manually ....................................................6 Storing stations automatically (Travelstore) .................6 Scanning stations....................................................................6 Adjusting the seek tuning sensitivity ..............................6 Switching RDS on/off ............................................................6 Switching the REG (regional programmes) function on/off ...........................................................................................6 Switching the AF (alternative frequencies) function on/off ...........................................................................................6 Selecting the programme type and starting seek tuning ..........................................................................................7 Switching priority for traffic announcements on/off .7 USB playback .............................................................. 7 Basic information ....................................................................7 USB data carrier .......................................................................7 Audio playback from USB ....................................................7 Video playback from USB ....................................................8 Image playback from USB ...................................................9 Bluetooth mode .......................................................... 9 Starting Bluetooth mode .....................................................9 Registering Bluetooth devices ........................................ 10 Telephone mode .................................................................. 10 Alphabetic search ............................................................... 10 Audio playback via Bluetooth streaming .................... 10 Audio playback via app control
(Android cell phone) ........................................................... 11 Bluetooth settings ............................................................... 11 Rear Camera input .................................................... 11 Sound settings .......................................................... 12 Volume distribution (fader/balance) ............................ 12 Equalizer .................................................................................. 12 Basic settings ............................................................ 12 General .................................................................................... 12 Video ......................................................................................... 12 Sound ....................................................................................... 13 Time .......................................................................................... 13 Contents Language ................................................................................ 13 Bluetooth ................................................................................ 13 Volume ..................................................................................... 13 Useful information ................................................... 13 3 DEUTSCHENGLISH General safety notes Observe the following note to protect yourself against injuries:
Do not modify or open the device. Use as directed This car sound system is intended for installation and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot. Observe the output limits of the device. Repairs and installation, if necessary, should be performed by a specialist. Declaration of conformity The Blaupunkt Technology GmbH declares that the de-
vice complies with the basic requirements and the other relevant regulations of the directive 1999/5/EC. The declaration of conformity can be found on the Inter-
net under www.blaupunkt.com. Cleaning notes Solvents, cleaning and scouring agents as well as dash-
board spray and plastics care product may contain in-
gredients that will damage the surface of the car sound system. Use only a dry or slightly moistened cloth for cleaning the car sound system. Disposal notes Do not dispose of your old unit in the household trash!
Use the return and collection systems available to dispose of the old device, the remote control and exhausted batteries. Safety notes | Cleaning notes | Disposal notes Safety notes The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions. These instructions are intended to familiarise you with the most important functions. Detailed information can be found on the Internet under www.blaupunkt.com. Read these instructions carefully and completely before using the car sound system. Keep the instructions at a location so that they are always accessible to all users. Always pass on the car sound system to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this car sound system. Symbols used These instructions employ the following symbols:
DANGER!
Warns about injuries DANGER!
Warns about high volume The CE mark confirms the compliance with EU directives. Identifies a sequencing step Identifies a listing Road safety Observe the following notes about road safety:
Use your device in such a way that you can always safely control your vehicle. In case of doubt, stop at a suitable location and operate your device while the vehicle is standing. As the driver, you may not use the applications that will distract you from traffic
(depending on the scope of functions of the device, e.g. viewing videos, entering a destination). Follow the driving recommendations during the route guidance only if you are not violating any traffic regulations! Traffic signs and traffic regulations have always priority over driving recommendations. Always listen at a moderate volume to protect your hearing and to be able to hear acoustic warning signals (e.g. police sirens). During mute phases (e.g. when changing the audio source), changing the volume is not audible. Do not increase the volume during this mute phase. 4 Placing the device in operation Switching on/off Switching on/off with the button For switch-on, press the [
For switch-off, hold the [
than 2 seconds.
] button.
] button pressed for more Volume Adjusting the volume You can adjust the volume in steps from 0 (off) to 50
(maximum). Press [ + ]/[ - ] to change the volume. Muting the car sound system (Mute) Briefly press the [
] to mute the device or to reactivate the previous volume. Main menu(Home) In the main menu, you press the buttons on the touch-
screen to call up the different sources and operating modes. Press the [
] button.
- Or -
In the current source, press the [
The main menu is displayed.
] button. As long as you do not select a new audio source, the last active audio source is played back. Note:
The figures used in these instructions are intended to facilitate the explanations and details may deviate from your device. Startup | Radio mode Setting the reception area This car sound system is designed for operation in different regions with different frequency ranges and station technologies. The factory default of the reception area is "South America (FM/AM)". You can set a different reception area. In the main menu, press the [ Settings ] button. The Settings menu is displayed. In the upper area of the Settings menu, press the
[ General ] button. The current setting is displayed behind "Radio region". Tap twice (double-click) on the [ Radio region ]
button to display the list of available reception areas. Select the desired reception area by double-clicking. The list is hidden, the selected reception area is set. Press the [
] button. The main menu is displayed again. Radio mode Start radio mode In the main menu, press the [ Radio ] button. The radio playback menu is displayed. Select memory bank Different memory banks and wavebands are available. Up to 6 stations can be stored in each memory bank. Press the [
] button repeatedly until the desired memory bank is displayed. FM1 AM1 FM2 FM3 AM2 FM1 5 DEUTSCHENGLISH Radio mode Tuning into a station Tuning into stations manually Briefly press the [
] button once or several times to change the frequency in increments.
] or [
Enter broadcast frequency directly If the frequency of the desired stations is known, it can be entered directly via the touchscreen. Press the [
] button to display additional operating options. Press the [
] button. A numeric keypad is displayed for the frequency input. Enter the frequency of the desired station with the numeric keypad. Press the [ Ok ] button. The radio playback menu is displayed, the station of the frequency entered is played back. Starting station seek tuning Press the [
] or [
] button for approx. 2 sec-
onds to start station seek tuning. The radio tunes into the next receivable station. Note:
For the reception area Europe: In the FM waveband, only traffic information stations are tuned into if the priority for traffic information is switched on. Storing stations manually Select the desired memory bank with the [
ton.
] but-
Set the desired station. Press one of the memory buttons [ P1 ] - [ P6 ] for approx. 2 seconds to store the current station at the button. The station is stored. Storing stations automatically
(Travelstore) With Travelstore, you can automatically search for and store the 6 FM stations offering the strongest reception in the region in the current memory bank. Any previously stored stations in this memory bank are deleted in the process. Select a memory band. Press the [
tiong options.
] button to display additional opera-
Press the [ TS ] button. The tuner starts the automatic station seek tuning. After the storing is completed, the radio plays the station at memory location 1 of the previously se-
lected memory band. 6 Note:
For the Erurope reception area: If traffic information is switched-on, only traffic informations are stored. Scanning stations You can use the scan function to play all the receivable stations of the current waveband for a few seconds. Press the [
] button. The seek tuning searches for stations in the current waveband. Each receivable station is played for a few seconds in the process. Pressing the [
] button again selects the currently scanned station and plays it back. Adjusting the seek tuning sensitivity The seek tuning sensitivity decides whether the auto-
matic station seek tuning finds only strong stations or also weaker stations that may be noisy. Press the [ DX / LO ] button to adjust the sensitivity of station seek tuning. If Local is displayed, only stations with a strong signal are found during seek tuning. If Distance is displayed, stations with a strong and weak signal are found during seek tuning. Switching RDS on/off Many FM stations broadcast an RDS (Radio Data System) signal in addition to their programme in the reception area Europe that allows additional functions, such as the display of the station name. Press the [
] button to display additional operating options. Press the [ RDS ] button to switch the RDS function on or off. If RDS function is switched on, RDS is displayed in white. Press the [
] button to hide the additional operation options, or wait until they are automatically hidden. Switching the REG (regional programmes) function on/off Some RDS stations divide their programmes into region-
al programmes with different content at certain times. Press the [ REG ] button to switch the REG function on or off. If the REG function is switched on, REG is illuminated. Switching the AF (alternative frequencies) function on/off If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the station that is currently set. Press the [ AF ] button to switch the AF function on or off. The AF button is illuminated if the AF function is switched on. Selecting the programme type and starting seek tuning You can select a programme type with the PTY function to purposefully search for stations, for example, that broadcast rock music or sport events. Press the [
] button to display additional operating options. Press the [ PTY ] button to display the programme types. Flip up/down to scroll through the list and tap on the desired programme type to select it. Press the [ PTY ] button to start PTY seek tuning. If a station broadcasts a programme with the select-
ed programme type, this station is played back. Switching priority for traffic announcements on/off In the reception region Europe, an FM station can iden-
tify traffic announcements via an RDS signal. If priority for traffic reports is switched on, a traffic report is automati-
cally switched through, even if the car sound system is currently not in radio mode. Press the [ TA ] button to switch the priority for traffic announcements on or off. The TA button is illuminated if the priority for traffic announcements is switched on. USB media playback Basic information The car sound system can be used to play MP3 or WMA files on USB data carriers. In addition, you can view movies and images from USB data carriers on the display or a connected monitor. For safety reasons, the playback of movies and images on the integrated monitor is allowed only while the vehicle is standing and the hand brake is applied. The
"BRAKE" cable must be connected with the hand brake connection of the vehicle (see Connection diagram at the end of these instructions). The movie playback on an external monitor is also possible while driving. Notes:
Blaupunkt cannot guarantee the flawless function of USB data carriers available on the market. Note the following information when preparing an MP3/
WMA data carrier:
Radio mode | USB playback Naming of tracks and directories: Max. 32 characters without the file extension ".mp3" or ".wma" (the use of more characters reduces the number of tracks and folders that the car sound system can recognise) USB format/file system: mass storage device / FAT/
FAT16/FAT32 File extension of audio files:
.MP3 for MP3 files
.WMA for WMA files WMA files only without Digital Rights Management
(DRM) and created with Windows Media Player ver-
sion 8 or later MP3 ID3 tags: Version 1 and 2 Bit rate for creating audio files:
MP3: 32 to 320 kbps WMA: 32 to 192 kbps Maximum number of files and directories:
USB medium: Up to 10,000 entries USB data carrier This device features a USB port at the rear of the device. Connecting a USB data carrier Insert the USB data carrier in the USB socket. The device automatically switches to USB mode. The data are read, the playback starts with the first media file recognized by the device. Removing the USB data carrier Turn off the car sound system. Disconnect the USB data carrier. Audio playback from USB The principles of the audio playback (MP3/WMA) from data carriers are identical for all sources. Select the desired source via the main menu. The device changes to the desired source and the playback starts. If the playback does not start with the audio playback, press the [
list.
] button to change to the folder/file Press the [
] button to display all the folders and files of the data carrier.
- Or -
Press the [
] button to display all the audio files of the data carrier. 7 DEUTSCHENGLISH USB playback Briefly tap twice (double-click) on the name of the folder/track. The folder is opened/the track is started. After starting a title, the playback menu is displayed.
[
[
REPEAT mode Repeat current track Repeat current folder Repeat all tracks of data carrier
] Start MIX random track play and end it again. If the MIX function is switched on, the symbol is displayed in white. The MIX mode depends on the selected REPEAT function.
] Display equalizer. Video playback from USB Select the desired source via the main menu. The device changes to the desired source and the playback starts. If the playback does not start with the video playback, press the [
list.
] button to change to the folder/file Press the [
] button to display all the folders and files of the data carrier.
- Or -
Press the [
] button to display all the video files of the data carrier.
[
[ /
[
[
[
] Short press: Title selection. Long press: Fast searching.
] Interrupt playback and continue playback.
] Short press: Title selection. Long press: Fast searching.
] Display the folder/file list.
] Show additional operating options. Tap on [
] to display additional operating op-
tions of the playback menu. Note:
Folders and videos are selected and started as de-
scribed under audio playback. If you selected a movie, the playback is started. During the movie playback, the playback menu is hidden. Briefly touch the touchscreen once to display the playback menu again. The playback menu is shown.
[
[
] Hide additional operating options.
] Display keypad to directly enter the number of the desired title. Audio playback from USB:
[
] Start and end REPEAT function. The REPEAT mode changes each time the
[
] button is pressed. 8 USB playback | Bluetooth mode
- Or -
Press the [
] button to display all the images of the data carrier. Note:
Folders and images are selected and started as de-
scribed under audio playback. Bluetooth mode The Bluetooth function allows registering cell phones and media playback devices with the car sound system. When you register a cell phone with the car sound sys-
tem, you can make phone calls with the built-in hands-
free function. You can access the lists of dialled numbers and the phone book of the registered cell phone. If the connected Bluetooth device supports the func-
tions A2DP and AVRCP, you can play the music via the car sound system and control the playback. During a call, the music playback is interrupted and continued again after the call. If a cell phone is registered via Bluetooth and a call is re-
ceived during the playback of another source, the source playback is interrupted and the call menu is displayed. Starting Bluetooth mode In the main menu, press on [ Bluetooth ]. The Bluetooth menu is displayed. It contains the list of known Bluetooth devices. Other audio sources are switched off.
[
[
] Add new Bluetooth device.
] Display options menu. 9
[
[ /
[
[
] Select previous movie.
] Interrupt playback and continue playback.
] Select next movie.
] Call up keypad for direct selection of movie or playing time.
[
[
] Display the folder/file list.
] Show additional operating options. Tap on [
] to display additional operating op-
tions of the playback menu.
[
[
[
[
[
[
] Hide additional operating options.
] Display equalizer.
] Switch repeat function for movie or folder on/off.
] Adjust image.
] Select playback language (only if supported by the movie).
] Show subtitles (only if supported by the movie). Image playback from USB Select the desired source via the main menu. The device changes to the desired source and the playback starts. If the playback does not start with the image playback, press the [
list.
] button to change to the folder/file Press the [
] button to display all the folders and files of the data carrier. DEUTSCHENGLISH Bluetooth mode Press the [ Connect ] button of the Bluetooth device with which you want to establish a connection. When the device is in range, the connection is estab-
lished and the menu for the device is displayed. Press the [ Delete ] button if you want to delete the Bluetooth device from the list. Registering Bluetooth devices If you want to register a device with the car sound system for the first time, proceed as follows:
Ensure that Bluetooth is activated at the car sound system and at your Bluetooth device. In the options menu of the Bluetooth mode, enter a pairing code (see Bluetooth settings). Enter a phone number with the keypad and press the
] button.
[
- Or -
Select a contact/number via the caller lists or phone book and press the [ Dial ] button in the pop-up win-
dow. The connection is being established. If a call is coming in, the call menu is displayed. Search for new devices/connections on your Blue-
tooth device. The car sound system appears as "SP 800" in the list of Bluetooth devices. Establish the connection; you may have to enter the pairing code that was previously entered on the car sound system. The connection is being established and the menu for the registered device is displayed. Note:
If a telephone is connected with the car sound sys-
tem, the Bluetooth icon is displayed at the top right edge of the display in all audio/video sources. Telephone mode If you connected a phone with the car sound system via Bluetooth, the following menu appears.
[
[
](Hang up): Reject a call.
](Answer): Answer a call. Alphabetic search Press [
Phonebook. If you want to search a contact, press [
and enter the characters via the keypad.
] on the left bottom of the screen to access
]
Audio playback via Bluetooth streaming If an audio streaming device is connected with the car sound system via Bluetooth, you can play back the mu-
sic via the car sound system and control the playback. Press the [
back.
] button to change to the audio play-
[
[
[
[
[
[
[
[
] Display the phone menu.
] Display the playback menu for Bluetooth streaming.
] Display the playback menu for app control.
] Disconnect connection with current device.
] Call up the phone book.
] Call up caller lists.
] Display options menu.
] Activate the voice control. 10
[
[
[
[
[
] Display the phone menu.
] Display the playback menu for Bluetooth streaming.
] Display the playback menu for app control.
] Disconnect connection with current device.
] Short press: Title selection. Long press: Fast searching.
[ /
[
] Interrupt playback and continue playback.
] Short press: Title selection. Long press: Fast searching.
[
] Display equalizer. Audio playback via app control
(Android cell phone) With the "Blaupunkt Android Player Multimedia Series"
app, music files stored on an Android cell phone can be divided into certain categories with the help of ID3 tag information. This allows you to quickly and conveniently select and play back music tracks across different catego-
ries. For this purpose, the app must be installed on the Android cell phone. The "Blaupunkt Android Player Mul-
timedia Series" app can be downloaded on the Internet from www.blaupunkt.com. Note:
The audio playback via "Blaupunkt Android Player Multimedia Series" app is available only for Android cell phones with operating system Android 2.3 and higher. In addition, the cell phone must support the Bluetooth profiles SPP (Serial Port Profile) and A2DP
(Advanced Audio Distribution Profile). Press the [
playback.
] button to change to the audio
[
[
[
[
[
] Display the phone menu.
] Display the playback menu for Bluetooth streaming.
] Display the playback menu for app control.
] Display category lists.
] Short press: Title selection. Long press: Fast searching.
[ /
[
] Interrupt playback and continue playback.
] Short press: Title selection. Long press: Fast searching.
[
[
] Switch repeat function on/off.
] Switch random playback on/off. Bluetooth mode | Rear Camera input Bluetooth settings In the options menu for Bluetooth, you can make the basic settings for the Bluetooth mode. Press the [
] button. The options menu is displayed. If "Auto Answer"
Bluetooth Bluetooth can be switched on or off. Auto connect If "Auto Connect" is activated, the device automatically connects with known Blue-
tooth devices as soon as they are in range. Auto answer incoming phone calls are automatically answered. Pairing code Many Bluetooth devices request the pairing code before establishing the connection. You can define it here. Phone book sync To be able to access the phone book of a connected telephone, you must first synchronise it via this menu entry. is activated, Press [
] to exit the options menu. 11 DEUTSCHENGLISH Sound settings | Basic settings Rear Camera input This device features a video input at the rear of the device for connecting a camera that is available as an option. If a rear camera is connected, the image is displayed on the screen, when the rear gear is engaged. Sound settings Volume distribution (fader/balance) You can adjust the volume distribution in the vehicle for all sources. In the main menu or on the control bar of the current audio source, press the [
The equalizer menu is displayed.
] button. Press the [
] button. The menu for fader and balance is displayed. Press the [ User ] button to adjust the level of the available frequency bands according to your preferences. Note:
With the [ Reset ] button, you can reset the customised setting again.
- Or -
Press the [ Flat ] button for a linear sound playback. Press the [ Loudness ] button to switch increasing the bass at low volume on or off. Next, press [
]. The setting is stored, the current source is displayed again. Basic settings In the settings menu, you can adjust the basic settings for the different functions of the device to your requirements. In the main menu, press the [ Settings ] button. The settings menu is displayed, the General submenu is activated. Adjust fader and balance with [
] / [
] or
[
] / [
]. Next, press [
]. The setting is stored, the current source is displayed again. Equalizer You can adjust the equalizer for all sources. In the main menu or on the control bar of the current audio source, press the [
The equalizer menu is displayed.
] button. Select a preset equalizer via the buttons.
- Or -
12 Call up the submenus with the buttons in the lower area of the settings menu. General The following settings are possible:
Radio region Select the reception region for the radio reception. FM HICUT - Trun on the function to enhance the signal of FM. Blackout If this value is set, the display of the radio is completely switched off after 10 or 20 sec. without use. Dimmer mode Adjust the display brightness Beep Switch confirmation beep on/off TFT calibration The touchscreen can be calibrated here. Software version - Show the version of software Load factory settings - Resets all personalised settings. Rear view camera - normal/mirror Basic settings | Useful information Useful information Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. Video The following settings are possible:
Aspect ratio - Adjust the aspect ratio Sound The following settings are possible:
Subwoofer Switch subwoofer on/off Subwoofer filter Make the setting according to the subwoofer used (settings: 80/120/160 Hz). Time The following settings are possible:
Date Set the date Clock mode Selection between 12 and 24-h mode Time Set the time Auto clock Switch automatic clock setting on or off with the time data transmitted via RDS. Language The following settings are possible:
OSD Language for the user interface of the device. Bluetooth The following settings are possible:
Bluetooth Bluetooth can be switched on or off. Auto connect If "Auto Connect" is activated, the device automatically connects with known Bluetooth devices as soon as they are in range. Auto answer Phone calls from connected telephones are automatically answered if this option is enabled. Pairing code Many Bluetooth devices request the pairing code before establishing the connection. You can define it here. Volume You can adjust the volume ratio for all audio sources in the volume menu. Subject to technical changes!
13 DEUTSCHENGLISH Controles dispositivo 9 1 2 3 4 5 6 8 7
] Botn
[
Enciende el equipo En funcionamiento:
Pulsacin larga: Apaga el equipo
] Botn
[
Silencia la fuente de audio Tecla INICIO Pulsacin breve: Vuelve a la pgina principal (no importa en que pantalla est) Pulsacin larga: Exhibe reloj anlogo en pantalla 4 Tecla BRILLO Pulsacin breve: Ajusta el brillo de la pantalla (4 pasos) Pulsacin larga: Apaga la pantalla (sin cortar el audio, vuelve a encender cuando se toca en pantalla o se ejecuta una funcin) 5/6 [ + ] / [ - ] Botn Ajusta volumen 7 8 Pgina siguiente Pantalla tctil interfaz de usuario 9 Micrfono 1. 2. 3 14 Notas de seguridad .................................................. 16 Smbolos utilizados ............................................................. 16 Seguridad vial........................................................................ 16 Indicaciones generales de seguridad ........................... 16 Declaracin de conformidad ........................................... 16 Colocacin del dispositivo en funcionamiento ...... 17 Encendido / apagado ......................................................... 17 Volumen .................................................................................. 17 Men principal (Incio) ....................................................... 17 Ajuste de la zona de recepcin ....................................... 17 Modo de radio ........................................................... 18 Iniciar el modo de radio ..................................................... 18 Seleccionar banco de memoria ...................................... 18 Sintonizando una estacin ............................................... 18 Memorizar las emisoras manualmente ........................ 18 Almacenando emisoras automaticamente
(Travelstore) ........................................................................... 18 Exploracin de emisoras ................................................... 18 Ajuste de la sensibilidad de bsqueda de sintona . 19 Encendido / apagado de RDS .......................................... 19 Activacin / desactivacin de la funcin REG
(programas regionales) ...................................................... 19 Activacin / desactivacin de la funcin AF
(frecuencias alternativas) .................................................. 19 Seleccin del tipo de programa e inicio de la bsqueda de sintona ......................................................... 19 Prioridad de conmutacin para avisos de trfico activados / desactivados ................................................... 19 Reproduccin de USB ............................................... 20 Informacin bsica .............................................................. 20 Soporte de datos USB ........................................................ 20 Reproduccin de audio desde USB ............................... 20 Reproduccin de vdeo desde USB .............................. 21 Reproduccin de imgenes desde USB ...................... 22 Modo Bluetooth ........................................................ 22 Inicio del modo Bluetooth ................................................ 22 Registrando dispositivos Bluetooth .............................. 22 Modo de telfono ................................................................ 23 Bsqueda alfabtica ........................................................... 23 Reproduccin de audio a travs de transmisin Bluetooth ................................................................................ 23 Reproduccin de audio a travs de la aplicacin de control ..................................................................................... 24
(Telfono celular Android) ................................................ 24 Configuracin de Bluetooth ............................................ 24 Entrada de la cmara trasera ................................... 24 Ajustes de sonido ..................................................... 25 Volume distribution (fader/balance) ............................ 25 Ecualizador ............................................................................. 25 Contenido Ajustes bsicos.......................................................... 25 General .................................................................................... 25 Video ......................................................................................... 25 Sonido ...................................................................................... 26 Hora .......................................................................................... 26 Idioma ...................................................................................... 26 Bluetooth ................................................................................ 26 Volumen .................................................................................. 26 15 DEUTSCHESPAOL Notas de seguridad | Notas de limpieza | Notas de eliminacin Indicaciones generales de seguridad Observe la siguiente nota para protegerse contra le-
siones:
No modifique ni abra el dispositivo. Utilice segn lo indicado Este sistema de sonido automotriz est destinado a la instalacin y funcionamiento en un vehculo con voltaje y sistema de 12 V y debe instalarse en una ranura DIN. Observe los lmites de salida del dispositivo. Las reparaciones e instalacin, si es necesario, deben ser realizadas por un especialista. Declaracin de conformidad La empresa Blaupunkt Technology GmbH declara que el dispositivo cumple con los requisitos bsicos y con los dems reglamentos pertinentes de la Directiva 1999/5 /
CE. La declaracin de conformidad puede encontrarse en Internet en www.blaupunkt.com. Notas de limpieza Los disolventes, agentes de limpieza y desengrasado, as como el producto para el cuidado de los rociadores y productos plsticos, pueden contener ingredientes que daarn la superficie del sistema de sonido automotriz. Utilice slo un pao seco o un poco humedecido para limpiar el sistema de sonido automotriz. Notas de eliminacin No deseche su unidad vieja en la basura domstica!
Utilice los sistemas de devolucin y recogida disponibles para desechar el dispositivo antiguo, el mando a distancia y las pilas agotadas. Notas de seguridad El sistema de sonido del automvil fu fabricado de acu-
erdo con lo ltimo en tecnologa y directrices de seguri-
dad establecidas. An as, se pueden producir peligros si no observa las notas de seguridad en estas instrucciones. Estas instrucciones estn destinadas a familiarizarse con las funciones ms importantes. Puede encontrar infor-
macin detallada en Internet en www.blaupunkt.com. Lea estas instrucciones cuidadosamente y comple-
tamente antes de usar el sistema de sonido del automvil. Guarde las instrucciones en un lugar para que estn siempre accesibles para todos los usuarios. Siempre pasar el sistema de sonido automotriz a ter-
ceros junto con estas instrucciones. Adems, observe las instrucciones de los dispositivos utilizados en conjunto con este sistema de sonido auto-
motriz. Smbolos utilizados Estas instrucciones emplean los siguientes smbolos:
PELIGRO!
Advierte sobre lesiones PELIGRO!
Advierte sobre el alto volumen La marca CE confirma el cumplimiento de las directivas de la UE. Identifica un paso de secuenciacin Identifica un listado Seguridad vial Observe las siguientes notas sobre seguridad vial:
Utilice su dispositivo de tal manera que siempre pueda controlar con seguridad su vehculo. En caso de duda, pare en un lugar adecuado y opere el dispositivo mientras el vehculo est parado. Como controlador, no deberas poder utilizar las aplicaciones que le distraigan del trfico
(dependiendo del alcance de las funciones del dispositivo, por ejemplo, visualizacin de vdeos, introduccin de un destino). Siga las recomendaciones de conduccin durante la gua de ruta slo si no est violando ninguna normativa de trfico! Las seales de trnsito y los reglamentos de trfico siempre tienen prioridad sobre las recomendaciones de conduccin. Escucha siempre a un volumen moderado para proteger su audicin y poder or seales acsticas de advertencia (por ejemplo, sirenas policiales). Durante las fases de silencio (por ejemplo, al cambiar la fuente de audio), el cambio del volumen no es audible. No aumente el volumen durante esta fase de silencio. 16 Colocacin del dispositivo en funcionamiento Encendido / apagado Prendiendo/apagando Pulse el botn [
Cuando prendida, pulse y mantenga el botn
[
] para prender la unidad.
] para apagar la unidad. Volumen Ajuste del volumen Puede ajustar el volumen en pasos de 0 (apagado) a 50
(mximo). Pulse la [ + ]/[ - ] para cambiar el volumen. Silenciamiento del sistema de sonido del coche
(Mudo) Pulse brevemente la [
] para silenciar el dispositivo o para retornar al volumen anterior. Men principal (Incio) En el men principal, pulse los botones de la pantalla tctil para acceder a las diferentes fuentes y modos de funcionamiento. Pulse la tecla [
] .
- O -
En la fuente actual, pulse el botn [
]. Se muestra el men principal. Siempre y cuando no seleccione una fuente de audio nueva, se reproduce la ltima fuente de audio activa. Nota:
Las figuras utilizadas en estas instrucciones estn destinadas a facilitar las explicaciones y los detalles pueden diferir de su dispositivo. Inicio Ajuste de la zona de recepcin Este sistema de sonido automotriz est diseado para funcionar en diferentes regiones con diferentes rangos de frecuencias y tecnologas de sintona. La configuracin de zona predeterminada de fbrica es "South America". Se puede configurar un rea de recepcin diferente si le gusta.. En el menu principal, pulse el botn [ Ajustes ]. Se muestra el men Configuracin. Si el cono [ Ajustes ] no aparece en el menu, de-
splaze la pantalla hacia la derecha para mostrar ms iconos. En el rea superior del men Configuracin, pulse el botn [ General ]. El ajuste actual aparece bajo "Radio region". Pulse dos veces (doble clic) en el botn [ Radio region ] para mostrar la lista de reas de recepcin disponibles. Seleccione el rea de recepcin deseada haciendo doble clic. Pulse el botn [
]. El men principal se muestra nuevamente. 17 DEUTSCHESPAOL Modo de radio Modo de radio Iniciar el modo de radio En el men principal, pulse el botn [ Radio ]. Aparece el men de reproduccin de la radio. Nota:
Para la zona de recepcin Europa: En la banda de ondas FM slo se sintonizan las estaciones de infor-
macin de trfico si se activa la prioridad de la infor-
macin de trfico. Memorizar las emisoras manualmente Seleccione el banco de memoria deseado con el botn [
]. Ajuste la emisora deseada. Pulse uno de los botones de memoria [ P1 ] - [ P6 ]
por aprox. 2 segundos para almacenar la emisora ac-
tual en el botn. La estacin est almacenada. Almacenando emisoras automaticamente
(Travelstore) Con Travelstore, puede buscar y almacenar automtica-
mente las 6 estaciones FM que ofrecen la recepcin ms fuerte en la regin en el banco de memoria actual. Cualquier estacin previamente almacenada en este banco de memoria se borra en el proceso. Seleccione una banda de memoria. Pulse el botn [
] para mostrar opciones de oper-
acin adicionales. Pulse el botn [ TS ]. El sintonizador inicia la sintonizacin automtica de bsqueda de emisoras. Una vez completado el almacenamiento, la radio reproduce la estacin en la posicin de memoria 1 de la banda de memoria previamente seleccionada. Nota:
Para la zona de recepcin de Europa: Si la infor-
macin de trfico est activada, slo se almacenan las informaciones de trfico. Exploracin de emisoras Puede utilizar la funcin de exploracin para reproducir todas las emisoras que se pueden recibir de la banda ac-
tual durante unos segundos. Pulse el botn [
]. La sintonizacin de bsqueda busca estaciones en la banda de ondas actual. Cada estacin de recepcin se reproduce durante unos segundos en el proceso.
] selecciona nuevamente la Pulsando el botn [
estacin actualmente explorada y la reproduce. Seleccionar banco de memoria Diferentes bancos de memoria y bandas de frecuencia estn disponibles. Hasta 6 estaciones se pueden almace-
nar en cada banco de memoria. Pulse el botn [
] repetidamente hasta que se muestre el banco de memoria deseado. FM1 AM1 AM2 FM2 FM3 FM1 Sintonizando una estacin Sintonizacin manual de emisoras Presione brevemente el botn [
] una o varias veces para cambiar la frecuencia en incremen-
tos.
] o [
Ingrese la frecuencia directamente Si se conoce la frecuencia de las estaciones deseadas, se puede ingresar directamente a travs de la pantalla tctil.
] para mostrar opciones de oper-
Pulse el botn [
acin adicionales. Pulse el botn [
]. Aparece un teclado numrico para la entrada de fre-
cuencia. Introduzca la frecuencia de la emisora deseada con el teclado numrico. Pulse el botn [ Ok ]. Aparece el men de reproduccin de la radio, se re-
produce la emisora de la frecuencia introducida. Iniciando bsqueda de sintona Pulse el botn [
] o [
] por aprox. 2 segundos para iniciar la bsqueda de sintona. La radio sintoniza la prxima estacin que se puede recibir. 18 Ajuste de la sensibilidad de bsqueda de sintona La sensibilidad de sintona de bsqueda determina si la sintonizacin automtica de bsqueda de emisora encuentra slo estaciones fuertes o tambin estaciones ms dbiles que pueden ser ruidosas. Pulse el botn [ DX / LO ] para ajustar la sensibilidad de la sintonizacin de bsqueda de estacin. Si Local aparece, slo se encuentran estaciones con una seal fuerte durante la sintonizacin por bsqueda. Si Distance aparece, las estaciones con una seal fuerte y dbil se encuentran durante la sintonizacin de bsqueda. Encendido / apagado de RDS Muchas emisoras FM emiten una seal RDS (Radio Data System) adems de su programa en la zona de recepcin Europa que permite funciones adicionales, como la visu-
alizacin del nombre de la estacin. Pulse el botn [
acin adicionales.
] para mostrar opciones de oper-
Pulse el botn [ RDS ] para activar o desactivar la fun-
cin RDS. Si la funcin RDS est activada, RDS se muestra en blanco. Pulse el botn [
] para ocultar las opciones de op-
eracin adicionales, o esperar hasta que se oculten automticamente. Activacin / desactivacin de la funcin REG (programas regionales) Algunas estaciones RDS dividen sus programas en pro-
gramas regionales con contenido diferente en ciertos momentos. Pulse el botn [ REG ] para activar o desactivar la fun-
cin REG. Si se activa la funcin REG, REG est iluminado. Activacin / desactivacin de la funcin AF (frecuencias alternativas) Si la funcin AF est activada, el sistema de sonido au-
tomotriz automticamente se sintoniza en la mejor fre-
cuencia de recepcin para la emisora que est actual-
mente configurada. Pulse el botn [ AF ] para activar o desactivar la fun-
cin AF. El botn AF est iluminado si la funcin AF est acti-
vada. Modo de radio Seleccin del tipo de programa e inicio de la bsqueda de sintona Puede seleccionar un tipo de programa con la funcin PTY para propositivamente buscar estaciones, por ejem-
plo, que transmiten msica rock o eventos deportivos.
(No disponible en algunas regiones) Pulse el botn [
acin adicionales.
] para mostrar opciones de oper-
Pulse el botn [ PTY ] para mostrar los tipos de pro-
grama. Mueva hacia arriba / abajo para desplazarse por la lista y toque en el tipo de programa deseado para seleccionarlo. Pulse el botn [ PTY ] para empezar la bsqueda de sintona PTY. Si una estacin transmite un programa que se ha se-
leccionado anteriormente, esa estacin es reprodu-
cida. Prioridad de conmutacin para avisos de trfico activados / desactivados En la regin de sintona Europa, una estacin FM puede identificar anuncios de trfico a travs de una seal RDS. Si la prioridad de avisos de trfico est activa, un aviso de trfico es automticamente exhibido, mismo si el Sis-
tema de sonido automotriz no est en el modo de radio. Pulse el botn [ TA ] para activar o desactivar la prior-
idad de conmutacin para avisos de trfico. El botn TA se ilumina si la prioridad de conmutacin para avisos de trfico est activada. 19 DEUTSCHESPAOL Reproduccin de USB Reproduccin de USB Informacin bsica El sistema de sonido automotriz se puede utilizar para MP3 o WMA en portadores de datos USB . Adems, puede ver pelculas e imgenes de USB en la pantalla o en un monitor conectado. Por razones de seguridad, la reproduccin de pelculas e imgenes en el monitor integrado slo se permite mien-
tras el vehculo est parado y se aplica el freno de mano. El cable "BRAKE" debe conectarse con la conexin del fre-
no de mano del vehculo (ver Esquema de conexiones al final de estas instrucciones). La reproduccin de pelculas en un monitor externo tambin es posible mientras se conduce. Notas:
Blaupunkt no puede garantizar la total compatibilidad con los dispositivos USB disponibles en el mercado. Tenga en cuenta la informacin siguiente al preparar un soporte de datos MP3 / WMA:
Designacin de ttulos y directorios: Max. 32 carac-
teres sin la extensin de archivo ".mp3" o ".wma" (el uso de ms caracteres reduce el nmero de pistas y carpetas que el sistema de sonido del coche puede reconocer) Formato USB / sistema de archivos: dispositivo de almacenamiento masivo / FAT / FAT16 / FAT32 Extensin de archivos de audio:
- .MP3 para archivos MP3
- . WMA para archivos WMA WMA slo sin Digital Rights Management (DRM) y creados con Windows Media Player versin 8 o pos-
terior MP3 ID3 tags: Versin 1 y 2 Taza de bits para crear archivos de audio:
- MP3: 32 a 320 kbps
- WMA: 32 a 192 kbps Nmero mximo de archivos y directorios:
- Medio USB: Hasta 10.000 entradas Reproduccin de audio desde USB Los principios de la reproduccin de audio (MP3 / WMA) de los portadores de datos son idnticos para todas las fuentes. Seleccione la fuente deseada a travs del men prin-
cipal. El dispositivo cambia a la fuente deseada y se inicia la reproduccin. Si la reproduccin no se inicia con la reproduccin de audio, pulse el botn [
de archivos.
] para cambiar a la carpeta / lista Pulse el botn [
] Para mostrar todas las carpetas y archivos del soporte de datos.
- O -
Pulse el botn[
] para mostrar todos los archivos de audio del portador de datos. Toque brevemente dos veces (haga doble clic) en el nombre de la carpeta / pista. Se abre la carpeta / se inicia la pista.. Despus de iniciar un ttulo, se muestra el men de re-
produccin. Soporte de datos USB Puerto USB en la parte posterior del dispositivo. Conexin de un soporte de datos USB Inserte el soporte de datos USB en el puerto USB. El dispositivo cambia automticamente al modo USB. Los datos se leen, la reproduccin comienza con el primer archivo multimedia reconocido por el dispositivo. Extraccin del portador de datos USB Apagar el sistema de sonido automotriz. Desconecte el soporte de datos USB. 20
[
[ /
[
[
[
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Interrumpir la reproduccin y continuar la reproduccin.
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Mostrar la lista de carpetas / archivos.
] Mostrar opciones operativas adicionales. Toque en [
] para mostrar opciones de operacin adicionales del men de reproduccin.
[
[
] Ocultar opciones operativas adicionales.
] Mostrar ingresar directamente el nmero del ttulo deseado. teclado para el Audio playback from USB
[
] Inicio y fin de la funcin REPEAT. El modo REPEAT cambia cada vez que el botn
[
] es tocado. Modo de repeticin Repetir pista actual Repetir carpeta actual Repetir todas las pistas del soporte de datos
[
] Comenzar MIX la reproduccin aleatoria de la pista y finalizar nuevamente. Si la funcin MIX est activada, el smbolo El modo MIX depende de la funcin REPEAT seleccionada. se muestra en blanco.
[
] Mostrar ecualizador. Reproduccin de vdeo desde USB Seleccione la fuente deseada a travs del men prin-
cipal. El dispositivo cambia a la fuente deseada y se inicia la reproduccin. Si la reproduccin no se inicia con la reproduccin de vdeo, pulse el botn [
de archivos.
] para cambiar a la carpeta / lista Pulse el botn [
] para mostrar todas las carpetas y archivos del soporte de datos.
- O -
Pulse el botn [
] para mostrar todos los archivos de vdeo del soporte de datos. Reproduccin de USB Nota:
Las carpetas y los vdeos se seleccionan y se inician como se describe en la reproduccin de audio. Si seleccion una pelcula, se iniciar la reproduccin. Durante la reproduccin de la pelcula, el men de repro-
duccin se oculta. Toque brevemente la pantalla tctil una vez para volver a mostrar el men de reproduccin. Se muestra el men de reproduccin.
[
[ /
[
[
[
[
] Seleccionar pelcula anterior.
] Interrumpir la reproduccin y continuar la reproduccin.
] Seleccionar pelcula siguiente.
] Llamar al teclado para seleccionar directa-
mente la pelcula o el tiempo de reproduc-
cin.
] Mostrar la lista de carpetas / archivos.
] Mostrar opciones operativas adicionales. Tocar en [
] para mostrar opciones de operacin adicionales del men de reproduccin. 21 DEUTSCHESPAOL Reproduccin de USB | Modo Bluetooth
[
[
[
[
[
[
] Ocultar opciones operativas adicionales.
] Mostrar ecualizador.
] Activar / desactivar la funcin de repeticin de la pelcula o carpeta.
] Ajustar imagen.
] Seleccione el idioma de reproduccin (slo si est soportado por la pelcula).
] Mostrar subttulos (slo si est soportado por la pelcula). Reproduccin de imgenes desde USB Seleccione la fuente deseada a travs del men principal. El dispositivo cambia a la fuente deseada y se inicia la reproduccin. If the playback does not start with the image playback, pulse el botn [
de archivos..
] para cambiar a la carpeta / lista Pulse el botn [
] para mostrar todas las carpetas y archivos del soporte de datos.
- O -
Pulse el botn [
] para visualizar todas las imgenes del portador de datos. Nota:
Las carpetas e imgenes se seleccionan y se inician como se describe en la reproduccin de audio. 22 Modo Bluetooth La funcin Bluetooth permite registrar telfonos celu-
lares y dispositivos de reproduccin de medios con el sistema de sonido automotriz. Cuando registra un telfono celular con el sistema de so-
nido automotriz, se puede realizar llamadas telefnicas con la funcin manos libres incorporada. Puede acceder a las listas de nmeros marcados y al catalogo telefnico del telfono celular registrado. Si el dispositivo Bluetooth conectado soporta las fun-
ciones A2DP y AVRCP, puede reproducir la msica a travs del sistema de sonido del coche y controlar la reproduccin. Durante una llamada, la reproduccin de msica se interrumpe y contina. Si un telfono celular se registra a travs de Bluetooth y se recibe una llamada durante la reproduccin de otra fuente, se interrumpe la reproduccin de la fuente y se muestra el men de llamada. Inicio del modo Bluetooth En el men principal, presione el botn [ Bluetooth ]. Aparecer el men Bluetooth. Contiene la lista de dispositivos Bluetooth conocidos. Otras fuentes de audio estn desactivadas.
[
[
] Agregar nuevo dispositivo Bluetooth.
] Men de opciones de visualizacin. Pulse el botn [ Connect ] del dispositivo Bluetooth con el que desea establecer una conexin. Cuando el dispositivo est en rango, se establece la conexin y se muestra el men del dispositivo. Pulse el botn [ Delete ] si desea eliminar el disposi-
tivo Bluetooth de la lista. Registrando dispositivos Bluetooth Si desea registrar un dispositivo con el sistema de soni-
do automotriz por primera vez, proceda de la siguiente manera:
Asegrese de que Bluetooth est activado en el sis-
tema de sonido automotriz y en su dispositivo Blue-
tooth. En el men de opciones del modo Bluetooth, introduzca un cdigo de emparejamiento (consulte Ajustes Bluetooth). Buscar nuevos dispositivos / conexiones en el dis-
positivo Bluetooth. El sistema de sonido automotriz aparece como "SP 800" en la lista de dispositivos Bluetooth. Establecer la conexin; puede que tenga que in-
gresar el cdigo de emparejamiento que se introdujo previamente en el sistema de sonido del automvil. Se est estableciendo la conexin y se muestra el men del dispositivo registrado. Nota:
Si un telfono est conectado con el sistema de so-
nido del coche, el icono Bluetooth se muestra en el extremo superior derecho de la pantalla en todas las fuentes de audio / vdeo. Modo de telfono Si ha conectado un telfono con el sistema de sonido del coche a travs de Bluetooth, aparecer el siguiente men.
[
[
[
[
] Mostrar el men del telfono.
] Visualizacin del men de reproduccin para el streaming de Bluetooth.
] Mostrar el men de reproduccin para la aplicacin de control.
] Desconectar la conexin con el dispositivo actual.
] Exhibe a la gua telefnica.
] Exhibe las listas de llamadas.
] Men de opciones de visualizacin.
] Activar el control de voz.
[
[
[
[
Introduzca un nmero de telfono con el teclado y pulse el botn [
- O -
]. Seleccione un contacto / nmero a travs de las lis-
tas de llamadas o de la gua telefnica y presione el botn [ Dial ] en la ventana emergente. La conexin se est estableciendo. Si se recibe una llamada, se muestra el men de llamada. Modo Bluetooth
[
[
](Cuelgue): rechazar una llamada.
](Contesta): Contestar una llamada. Bsqueda alfabtica
] en la parte inferior izquierda de la pantalla Pulse [
para acceder a la Agenda telefnica. Si desea buscar un contacto, pulse [
] e introduzca los caracteres a travs del teclado. Reproduccin de audio a travs de transmisin Bluetooth Si un dispositivo de transmisin de audio est conectado con el sistema de sonido del coche a travs de Blue-
tooth, puede reproducir la msica a travs del sistema de sonido del coche y controlar la reproduccin. Pulse el botn [
de audio.
] para cambiar a la reproduccin
[
[
[
[
[
[ /
[
[
] Mostrar el men del telfono.
] Visualizacin del men de reproduccin para el streaming de Bluetooth.
] Mostrar el men de reproduccin para la aplicacin de control.
] Disconnect connection with current device.
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Interrumpir la reproduccin y continuar la reproduccin.
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Mostrar ecualizador. 23 DEUTSCHESPAOL Configuracin de Bluetooth En el men de opciones de Bluetooth, puede realizar los ajustes bsicos para el modo Bluetooth. Pulse el botn [
]. Se muestra el men de opciones. Bluetooth Bluetooth se puede encender o apagar. Auto connect Si "Auto Connect" est activado, el dispositivo se conecta automticamente con dispos-
itivos Bluetooth conocidos tan pronto estn dentro del alcance. Auto answer Si se activa "Respuesta automtica", las llamadas entrantes se responden automticamente. Pairing code Muchos dispositivos Bluetooth solicitan el cdigo de emparejamiento antes de establecer la conexin. Puedes definirlo aqu. Phone book sync Para poder acceder a la gua telefnica de un telfono conectado, primero debe sincronizarlo mediante esta entrada de men.
] para salir del men de opciones. Pulse [
Entrada de la cmara trasera Este dispositivo cuenta con una entrada de vdeo en la parte posterior del dispositivo para conectar una cmara que est disponible como opcin. Si se conecta una cmara trasera, la imagen se visualiza en la pantalla, cuando se engancha la marcha trasera. Modo Bluetooth | Entrada de la cmara trasera Reproduccin de audio a travs de la aplicacin de control
(Telfono celular Android) Con la aplicacin "Blaupunkt Android Player Multimedia Series", los archivos de msica almacenados en un tel-
fono celular Android se pueden dividir en ciertas catego-
ras con la ayuda de la informacin de la etiqueta ID3. Esto le permite seleccionar y reproducir de forma rpida y cmoda pistas de msica en diferentes categoras. Para este propsito, la aplicacin debe estar instalada en el telfono celular Android. La aplicacin "Blaupunkt An-
droid Player Multimedia Series" se puede descargar en Internet desde www.blaupunkt.com o en su tienda de aplicaciones preferida. Nota:
La reproduccin de audio a travs de la aplicacin
"Blaupunkt Android Player Multimedia Series" est disponible slo para telfonos celulares Android con el sistema operativo Android 2.3 y superior. Adems, el telfono celular debe admitir los perfiles Blue-
tooth SPP (perfil de puerto serie) y A2DP (Advanced Audio Distribution Profile). Pulse el botn [
de audio-back.
] para cambiar a la reproduccin
[
[
[
[
[
[ /
] Mostrar el men del telfono.
] Visualizacin del men de reproduccin para el streaming de Bluetooth.
] Mostrar el men de reproduccin para la aplicacin de control.
] Mostrar listas de categoras.
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Interrumpir la reproduccin y continuar la reproduccin.
[
[
[
] Presione brevemente: Seleccin de ttulo. Pulsacin larga: Bsqueda rpida.
] Activar o desactivar la funcin de repeticin.
] Activar / desactivar reproduccin aleatoria. 24 Ajustes de sonido Volume distribution (fader/balance) Puede ajustar la distribucin de volumen en el vehculo para todas las fuentes. En el men principal o en la barra de control de la fuente de audio actual, pulse el botn [
Aparece el men del ecualizador.
]. Pulse el botn [
]. Se visualiza el men de fader y balance. Ajuste el fader y el balance con [
[
].
] / [
] o [
] /
A continuacin, presione [
]. El ajuste se almacena, la fuente actual se muestra nuevamente. Ecualizador Puede ajustar el ecualizador para todas las fuentes. En el men principal o en la barra de control de la fuente de audio actual, pulse el botn [
Aparece el men del ecualizador.
]. Seleccione un ecualizador preestablecido mediante los botones.
- O -
Pulse el botn [ User ] para ajustar el nivel de las bandas de frecuencia disponibles segn sus preferencias. Nota:
Con el botn [ Reset ], puede restablecer el ajuste personalizado de nuevo. Ajustes de sonido | Ajustes bsicos
- O -
Pulse el botn [ Flat ] para una reproduccin de sonido lineal. Pulse el botn [ Loudness ] para activar o desactivar el bajo a bajo volumen. A continuacin, presione [
]. El ajuste se almacena, la fuente actual se muestra nuevamente. Ajustes bsicos En el men de configuracin, puede ajustar los ajustes bsicos para las diferentes funciones del dispositivo segn sus necesidades. En el men principal, presione el botn [ Settings ]. Se muestra el men de configuracin, se activa el submen General. Llamar a los submens con los botones en el rea inferior del men de configuracin. General Los siguientes ajustes son posibles:
Radio region Seleccione la regin de recepcin para la recepcin de radio. FM HICUT - Active la funcin para mejorar la seal de FM. Blackout Si se ajusta este valor, la pantalla de la radio se apaga completamente despus de 10 20 seg. sin uso. Dimmer mode Ajuste el brillo de la pantalla Beep Activar / desactivar el pitido de confirmacin de las funciones. TFT calibration La pantalla tctil se puede calibrar aqu. Software version - Mostrar la versin del software Load factory settings - Restablece todos los ajustes personalizados. Video Los siguientes ajustes son posibles:
Aspect ratio - Ajuste la relacin de aspecto 25 DEUTSCHESPAOL Ajustes bsicos Sonido Los siguientes ajustes son posibles:
Subwoofer Activar / desactivar el subwoofer Subwoofer filter Realice el ajuste segn el subwoofer utilizado (ajustes: 80/120/160 Hz). Hora Los siguientes ajustes son posibles:
Date Establecer la fecha Clock mode Seleccin entre el modo de 12 y 24 horas Time Ajustar la hora Auto clock Activar y desactivar el ajuste automtico del reloj con los datos horarios enviados mediante RDS. Idioma Los siguientes ajustes son posibles:
OSD Idioma de la interfaz de usuario del dispositivo. Bluetooth Los siguientes ajustes son posibles:
Bluetooth Bluetooth se puede encender o apagar. Auto connect Si "Auto Connect" est activado, el dispositivo se conecta automticamente con dispositivos Bluetooth conocidos tan pronto estn dentro del alcance. Auto answer Las llamadas telefnicas de los telfonos conectados se contestarn automticamente si esta opcin est activada. Pairing code Muchos dispositivos Bluetooth solicitan el cdigo de emparejamiento antes de establecer la conexin. Puedes definirlo aqu. Volumen Puede ajustar la relacin de volumen para todas las fuentes de audio en el men de volumen. 2017 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for personal use only. 26 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in-
cluding interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the us-
er's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV techni-
cian for help. Appendix FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body. 27 DEUTSCHESPAOL Blaupunkt Technology Americas S.A. Zona America Ruta 8 km Costa Park, Montevideo, Uruguay 0112 P/N:127075007628/A0 There are no restrictions of use
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-02-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-02-25
|
||||
1 | Applicant's complete, legal business name |
Blaupunkt Technology Americas S.A.
|
||||
1 | FCC Registration Number (FRN) |
0026002311
|
||||
1 | Physical Address |
Ruta 8 km 17.500 Costa Park Bldg, Zona America
|
||||
1 |
Montevideo, N/A
|
|||||
1 |
Uruguay
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AJ8A
|
||||
1 | Equipment Product Code |
SANPEDRO
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** C********
|
||||
1 | Title |
Business manager
|
||||
1 | Telephone Number |
+86-1********
|
||||
1 | Fax Number |
+86-1********
|
||||
1 |
s******@easternpartner.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Car Multimedia Player | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 | Name |
I**** H****
|
||||
1 | Telephone Number |
+86 0******** Extension:
|
||||
1 |
i******@gdest.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0011000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC