LiteStar Electronics Technology Co.,LTD. User Manual 1. Product diagram 2. Function is introduced 2.1 ON/OFF 2.1.1 Press the power switch for 1 second to loosen the power switch. 2.1.2 The shutdown method is to turn off the switch by pressing the switch for 2.1.3 Enter the game interface after startup, select the game you want to play 3 seconds. and press "A" to enter. 2.2 Handle operation Instructions 4.2.1 After starting up, insert the handset in USB port sequence for multi-user operation. 3. WiFi Settings 4.2.2 Gamepad button Function View related in-game button description. 3.1 WiFi SettingsSETTINGS>Network>setup a network 1 / 6 LiteStar Electronics Technology Co.,LTD. 3.2 Select A wireless network, press A to confirm and enter the password, and then press A to confirm. After the setting is successful, the network name, connection status, and IP address are displayed. 2 / 6 LiteStar Electronics Technology Co.,LTD. 4. Read the card 4.1 Insert good game cards into the left and right card slots respectively. 4.2 The main screen displays images of two cartridges, which can be accessed by selecting games with the gamepad. 5. The system update 5.1 Store the running of the game 5.1.1 Enter the GAME, press the "HOME" button, GAME MENU appears, and then test several functions of running the stored GAME. 5.1.2 Load Last Save/Load 3 / 6 LiteStar Electronics Technology Co.,LTD. 6. Key replacement function test 6.1 Enter the main screen, SETTINGS>System>Map controller, Press A to enter. 6.2 You can switch the functions of A key and B key. 4 / 6 LiteStar Electronics Technology Co.,LTD. 7. Working current Test status Boot in the game directory state 590 mA Boot after entering the game state 700 mA Current 8. Attention or 5.5V higher. of the handle. with each other. 8.1 The supply voltage is DC 5V positive and negative, not in the opposite direction 8.2 Avoid storage in damp, high temperature, lampblack and other places. 8.3 Avoid water or other liquids entering the handle, which may affect the function 8.4 Children should use this product under adult supervision. 8.5 Due to the wide variety of game cards in the market, they are not compatible 5 / 6 LiteStar Electronics Technology Co.,LTD. 9. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
-Consult the dealer or an experienced radio/TV technician for help. receiver is connected. RF warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 6 / 6