FCC ID: ROR1002 WLTFGT-145ACN LTE CAT 12/13 Indoor CPE

by: Blinq Wireless Inc. latest update: 2021-03-09 model: 1002

Three grants have been issued under this FCC ID on 03/09/2021 (this is one of twelve releases in 2021 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked drivers, instructions, password defaults, warrantee terms, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 External Photos External Photos pdf 1.27 MiB March 05 2021 / March 09 2021
1 2 3 Label Sample & Location ID Label/Location Info pdf 228.92 KiB March 05 2021 / March 09 2021
1 2 3 Change ID - applicant Cover Letter(s) pdf 247.16 KiB March 05 2021 / March 09 2021
1 2 3 Change ID - original Cover Letter(s) pdf 19.45 KiB March 05 2021 / March 09 2021
1 2 3 Power of Attorney Letter Cover Letter(s) pdf 235.30 KiB March 05 2021 / March 09 2021
1 2 3 External Photos External Photos pdf 1.27 MiB March 05 2021 / March 09 2021
1 2 3 Label Sample & Location ID Label/Location Info pdf 228.92 KiB March 05 2021 / March 09 2021
1 2 3 Change ID - applicant Cover Letter(s) pdf 247.16 KiB March 05 2021 / March 09 2021
1 2 3 Change ID - original Cover Letter(s) pdf 19.45 KiB March 05 2021 / March 09 2021
1 2 3 Power of Attorney Letter Cover Letter(s) pdf 235.30 KiB March 05 2021 / March 09 2021

frequency equipment class purpose
1 2021-03-09 3560 ~ 3695 CBD - Citizens Band Category A and B Devices Change in Identification
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2412 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 Effective 2021-03-09
1 2 3 Applicant's complete, legal business name Blinq Wireless Inc.
1 2 3 FCC Registration Number (FRN) 0022440390
1 2 3 Physical Address 140 Renfrew Drive Suite 205
1 2 3 140 Renfrew Drive
1 2 3 Markham, N/A
1 2 3 Canada
app s TCB Information
1 2 3 TCB Application Email Address t******@timcoengr.com
1 2 3 TCB Scope B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
1 2 3 A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 Grantee Code ROR
1 2 3 Equipment Product Code 1002
app s Person at the applicant's address to receive grant or for contact
1 2 3 Name J******** D****
1 2 3 Title Vice President Engineering
1 2 3 Telephone Number 416-2******** Extension:
1 2 3 Fax Number 613-5********
1 2 3 E-mail j******@blinqnetworks.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 Is this application for software defined/cognitive radio authorization?No
1 2 3 Equipment ClassCBD - Citizens Band Category A and B Devices
1 2 3 NII - Unlicensed National Information Infrastructure TX
1 2 3 DTS - Digital Transmission System
1 2 3 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WLTFGT-145ACN LTE CAT 12/13 Indoor CPE
1 2 3 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 Modular Equipment TypeDoes not apply
1 2 3 Purpose / Application is forChange in Identification
1 2 3 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 Grant CommentsOutput Power is EIRP. Professional installation is required. This transmitter operates as a CPE-CBSD. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device supports LTE of 10, 20, 10+10, 10+20, 20+10, and 20+20 MHz bandwidth modes for TDD LTE Band 48. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device supports Intra-Band Non-Contiguous CA.
1 2 3 Power listed is maximum power conducted. This device is restricted to indoor use only. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.
1 2 3 Power listed is maximum power conducted. Professional installation is required. This device must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.
1 2 3 Is there an equipment authorization waiver associated with this application?No
1 2 3 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 Firm Name International Certification Corporation
1 2 3 Name J****** C******
1 2 3 Telephone Number 886-3********
1 2 3 Fax Number +886-********
1 2 3 E-mail j******@icertifi.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 96 40 EP MO 3555 3695 0.667 0.015 ppm 8M93G7D
1 2 96 40 EP MO 3555 3695 0.547 0.015 ppm 8M93W7D
1 3 96 40 EP MO 3560 3690 0.7 0.015 ppm 17M8G7D
1 4 96 40 EP MO 3560 3690 0.535 0.015 ppm 17M8W7D
1 5 96 40 EP MO 3555 3695 0.634 0.015 ppm 17M8G7D
1 6 96 40 EP MO 3555 3695 0.635 0.015 ppm 17M9W7D
1 7 96 40 EP MO 3555 3690 0.693 0.015 ppm 26M7G7D
1 8 96 40 EP MO 3555 3690 0.687 0.015 ppm 26M8W7D
1 9 96 40 EP MO 3560 3695 0.644 0.015 ppm 26M8G7D
1 1 96 40 EP MO 3560 3695 0.637 0.015 ppm 26M8W7D
1 11 96 40 EP MO 3560 3690 0.692 0.015 ppm 35M7G7D
1 12 96 40 EP MO 3560 3690 0.692 0.015 ppm 35M7W7D
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.417
2 2 15E CC MO 5745 5825 0.467
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC MO 2412.00000000 2462.00000000 0.4070000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC