FCC ID: 2AD8ESTORMS1 STORM



BloomSky Weather Station STORM User Guide for Model STORM Join the #Weatherlution facebook.com/bloomsky instagram.com/bloomskyweather Blog at weatherlution.com www.bloomsky.com

+1-650-666-0855 support@bloomsky.com STORM-A1 STORM-S1 BloomSky TM www.bloomsky.com 1 of 11



Table of Contents Join the #Weatherlution BloomSky Accessories Meet your STORM Intended Use Requirements In the Box Indicator Lights Getting Started Setup Guidelines Placing your BloomSky Troubleshooting Technical Specifications Sensors Power Options Connectivity Material/Design App Features and Operating Systems Firmware Updates For your Safety Installation and Use Keeping the Lens Clean Handling Avoid Harsh Environments Warranty Disposal Federal Communications Commission Compliance (FCC) IC Rules Explanation of Symbols 1 3 3 3 3 4 4 4 5 5 5 5 6 6 6 6 6 6 7 7 7 7 7 8 9 10 11 BloomSky TM www.bloomsky.com 2 of 11



Meet your STORM Thank you for purchasing the BloomSky Weather Station STORM, the personal weather station compatible with iOS and Android devices. STORM consist of two parts, STORM-S1 (outdoor part) and STORM-A1 (indoor part). STORM-

S1 is a weather measurement device that uses internal sensors to give you wind speed, wind direction, rainfall and UV index information. It provides accurate, hyper-local weather data that is updated every ten seconds. STORM-A1 is a wireless access point, which receive data sent from STORM-S1, and then send the data to the cloud through Internet. To begin, install a SKY device (model SKY1 or SKY2) first. Read this manual before use and keep it for your future reference. It will help you through the setup process of your BloomSky Weather Station (model STORM-S1 and STORM-A1), introduce you to your device, guide you through troubleshooting and completing a hard reset. If you need any further assistance with your BloomSky Weather Station, you can call our customer support line at +1-650-666-0855 or email us at support@bloomsky.com. Intended Use The BloomSky Weather Station STORM is designed to allow you to record and share weather data from its location. The data will be sent to the cloud. Users can search, view, and share these data anywhere through the BloomSky mobile application. For your privacy you can choose for your BloomSkys data to not be publicly searchable. This can be set and changed in settings menu of the BloomSky app. Please refer to our Terms of Service for further details. Requirements iOS version 8.0 or higher Android version 4.3 or higher Router with LAN port Smart phone BloomSky app installed on a smartphone or iPod. App is available from the App Store or Google Play Store. In the Box One STORM-S1 One STORM-A1 One Solar Panel BloomSky TM www.bloomsky.com 3 of 11



One Power Adaptor One Ground Stake One Ethernet Cable One Setup Cable One Installation Guide Indicator Lights Indicator Light

Status

Meaning

STORM-S1 Indicator Flashes red 1 time

Device is powering up (or restarting).





Flashes green 1 time, every 10 seconds

Flashes yellow 1 time, every 10 seconds

Flashes green 3 times, every 10 seconds STORM-A1 Indicator Breathing Red

Sending data.

Sending data with device charging. Low battery. Device powered up, without network connection.



Breathing Green Network connect successfully. Flashes yellow

Received data from STORM-S1

Getting Started Setup Guidelines Detailed setup instructions are available in the STORM Installation Guide. Below are guidelines for a successful setup. Before starting setup, you must have installed a SKY device (model SKY1 or SKY2). Connect STORM-A1 with the Power Adaptor to power up, then the indicator light on STORM-

A1 will breathing red. Using the Ethernet Cable to connect STORM-A1 and your Router, to which the SKY device have connected through Wi-Fi. after a few seconds, the indicator light on STORM-A1 will breathing green. Connect STORM-S1 and STORM-A1 with the Setup Cable. Add the STORM device to your account in BloomSky App, following the guide in App. BloomSky TM www.bloomsky.com 4 of 11



It will takes 1 or 2 minutes, before the indicator light on STORM-A1 stays green (not breathing), and the indicator light on STORM-S1 flashes green every 10 seconds, then it means setup successfully. Now you can unplug the Setup Cable, and put STORM-S1 to a property place. Placing your BloomSky Your BloomSky Weather Station STORM will perform best when its fully exposed to the elements. Try to install your device where it will see direct sunlight and is as far as possible from tall obstacles (like trees, buildings, or fences), artificial wind sources (like ventilation ducts and air conditioning units), and moisture sources (such as garden irrigation systems and roof gutters). Accordingly:

Install your STORM in a location with a clear view of the sky. Trees, roof eaves, or other obstacles can cause inaccuracy on rainfall measurements. Be sensitive to sprinklers triggering the precipitation sensor. Try to place your BloomSky at least 10 feet away from any artificial wind and moisture source to aid in accurate reporting. Finally, the higher your device, the better!

Troubleshooting Problem

Solution

The indicator light of STORM-S1 quickly flashes green 3 times, every 10 seconds The battery is low and the device needs to charge. The indicator light of STORM-A1 keep breathing red, after it have connected to router with Ethernet Cable. The device cannot get the IP address from router. Please confirm your routers DHCP function is enabled. A Hard Reset restores your device to factory settings. Press the RESET button on STORM-A1 with a needle-like things, and reinsert Power Adaptor. Technical Specifications Sensors (STORM-S1) 4-in-1 sensors measure wind speed, wind direction, precipitation, and UV index with the following tolerances BloomSky TM www.bloomsky.com 5 of 11



Operating temperature range: -4F (-20C) to 122F (50C) wind speed accuracy: 1m/s (max) start-up wind speed: 1m/s wind direction: 8 directions Precipitation accuracy: 4%

UV index: 11 grades Power Options STORM-S1:

Powered by a rechargeable lithium-ion battery Battery operating and charging temperature range: -4F (-20C) to 122F (50C) Operating time: up to two weeks per charge Low battery alert sends push notifications on mobile apps Charging Option 1: through STORM-A1, with Setup Cable connect to each other, when STORM-A1 power on. Charging Option 2: through solar panel Output: DC 5V-0.4A. STORM-A1:

Powered by Power Adaptor (100-240V~50/60Hz(worldwide use), Output: DC 5V-1A) Connectivity Between STORM-S1 and STORM-A1 Sub-GHz connection Frequency Range: 868 MHz ~ 923 MHz Material/Design Water, dust, UV-resistant when the STORM-S1 is positioned upright Stake apparatus stands upright on for insertion in patio or garden soil Firmware Updates The firmware inside of your STORM-A1 can be automatically updated through its Ethernet connection to the BloomSky Cloud. The firmware inside of your STORM-S1 can be updated by connect to STORM-A1 with Setup Cable. For your Safety BloomSky TM www.bloomsky.com 6 of 11



WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other personal injury or loss or damage to the Product or other property. Installation and Use Please read and follow all installation instructions carefully. To avoid risk of shock or falls, do not install in wet weather or at night. Use only as specified in the user manual. Handling The Product contains sensitive components. Do not drop, disassemble, crush, puncture, incinerate, paint, or insert foreign objects into the Product. Inspect the Product periodically for damage, including battery leakage or damage to the electrical cord, as applicable. Do not use the Product or handle before unplugging if it has been damaged. Avoid Harsh Environments The Product is designed to be operated in temperatures between -4F (-20C) to 122F (50C). Extreme temperatures may affect battery life or functionality. While the Product is designed for use outdoors and in rain, avoid immersion in water or other liquids. If the Product gets extremely wet, allow it to dry thoroughly before handling. Do not attempt to dry the Product with an external heat source, such as an oven, microwave oven or hair dryer. Warranty BloomSky warrants that for a period of 1 year from shipment the product will be free from defects in materials and workmanship under normal use. In the event of a defect, contact BloomSky at https://www.BloomSky.com/contact/ or 1-650-666-0855 for return instructions. BloomSkys sole obligation under this warranty will be at its option to repair or replace the product. This warranty does not apply to products damaged by misuse, accident, or normal wear and tear. The product is not designed for or warranted against damage from use in areas subject to electrical interference, extreme heat or cold, immersion under water, or other inherently hazardous environments. In addition, BloomSky does not warrant the accuracy of weather data or forecasts obtained from use of the product. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. BLOOMSKY DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL BloomSky BE LIABLE FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF BloomSky HAS BloomSky TM www.bloomsky.com 7 of 11



BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL BloomSkyS LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary by jurisdiction. Disposal Wasteelectricalproductsshouldnotbedisposedofwithhouseholdwaste.Pleaserecyclewhere facilitiesexist.CheckwithyourlocalAuthorityorretailerforrecyclingadvice. BloomSky TM www.bloomsky.com 8 of 11



Federal Communications Commission Compliance (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme la section 15 des rglementations de la FCC. Le fonctionnement de lappareil est sujetaux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer dinterfrences nfastes, et

(2) cet appareil doit tolrer les interfrences reues, y compris celles qui risquent de provoquer un fonctionnement indsirable. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps BloomSky TM www.bloomsky.com 9 of 11



IC Rules This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. BloomSky TM www.bloomsky.com 10 of 11



Explanation of Symbols SymbolfortheOwnersManualMustberead

SymbolforCaution

SymbolforENVIRONMENTPROTECTIONWasteelectricalproductsshouldnotbe disposedofwithhouseholdwaste.Pleaserecyclewherefacilitiesexist.Checkwithyour localAuthorityorretailerforrecyclingadvice.



ManufacturedforBloomSky,Inc. 723N.ShorelineBlvd,MountainView,CA94043 www.BloomSky.com BloomSkyisthetrademarkofBloomSky,Inc. iPhoneisatrademarkofAppleInc.registeredintheU.S.andothercountries. AndroidisatrademarkofGoogleInc. 2015BloomSky,Inc.Allrightsreserved.



BloomSky TM www.bloomsky.com 11 of 11

Authority to Act as Agent Date: 5, 2016 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

GUANGZHOU GRG METROLOGY&TEST CO.,LTD. __ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 9 Months By: _Jurtao Xia JUNTAO XIAO

(Signature!) (Print name) Title: CEO. On behalf of: BloomSky, Inc.

(Company Name) Telephone: ___ (408) 406-8277

'. Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 -6

Request for Confidentiality Date: _ Nov 5, 2016___ Subject: Confidentiality Request for: __ 2AD8ESTORMS1__ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent*2 Permanent Permanent Permanent Permanent Permanent Permanent*

Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual

*Note: ______(Insert Explanation as Necessary)______ __ BloomSky, Inc__ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _0__ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By:

__________________________

(Signature/Title3) ____ JUNTAO XIAO _____

(Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 6