ARIA X QUICK GUIDE Multifunction Button Volume (-) Previous USB interface Microphone Volume (+) Next POWER ON
- Long press multifunction button until the blue light turns on and the headset beeps. PAIRING MODE
- Long press multifunction button until red and blue lights flash alternately and the headset beeps. POWER OFF
- Long press multifunction button until red light is turned off and headset beeps. PAIRING STEPS 1. Please keep the headset and mobile phone within 3 feet (1 meter) or as close as possible. 2. Turn on the headset and enter pair mode. Red and blue lights will flash alternately during this step. 3. Start the Bluetooth search function on the mobile phone. Once Bluetooth has finished searching, the mobile phone will display BOLD Aria X. 4. Select BOLD Aria X and the headset will automatically pair with the mobile phone. Once connected the headset will flash a blue light. (If a password is required, enter 0000), Note: The pair time of the wireless headset is at least 120 seconds. If the light is turned off, the wireless pairing mode has stopped. Please repeat step 1 to 4 to pair. UNPAIRING STEPS
- Turn off Bluetooth from the mobile phone.
- Press and hold the headset multifunction button until the headset automatically turns off. Note: If you move headset 30 feet (10 meters) away from the mobile phone, the headset will disconnect as it will be out of range. RECONNECTING 1. Please keep the headset and mobile phone within 3 feet (1 meter) or as close as possible. 2. Turn on the headset. Once on, the headset will enter search mode and will flash a blue light. 3. Power on Bluetooth on the mobile phone. Once detected the headset will automatically reconnect. ANSWERING CALLS
- Click the multifunction button to answer the call.
- Answer the phone call from your mobile phone. REJECTING CALLS
- Long press the multifunction button for 2 seconds.
- Use your mobile phone to reject a call. HANGING UP CALLS
- Click the multifunction button during a call
- Use your mobile phone to hang up a call. REDIALING
- Press the multifunction button for two times in the standby mode. This will redial last telephone number. PLAYING MUSIC
- Click the multifunction button to play or pause music.
- Click the volume button (+) / (-) to select a song.
- When playing music, long press the volume button (+) / (-) to adjust the volume. Bluetooth Headset FCC warning (FCC IDYHLBLUARIAX) Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.