FCC ID: YHLBLUC620 Mobile Phone

FCC Regulations:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. 1 Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This mobile phone meets the governments requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. 2 The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.34 W/kg and when worn on the body, as described in this user guide, is 0.99 W/kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: YHLBLUC620 For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.0 cm from your body when the phone is switched on. 3

BLU. smartphones MODEL/MODELO/MODELE:

eeanen 05/2020 C230EQ_ | Ot FCC ID:YHLBLUC620 INPUT/ENTRADA/ENTREE:3.8 V=(DC) 94mm Omit YE UCP HERE PUM a Designed by BLU in Miami Assembled in China Disenado por BLU en Miami] Ensamblaco en China Projetado por BLU em Miam! | Montado na China NYCE Gongu par BLU & Miam! |Assemble en Chine 64mm MODEL/MODELO/MODELE:

pein 05/2020 J190EQ 1 ot YHLBLUC620 NTRADA/ENTREE:3.8 V==(DC) HCL UMC MU mt ui mL Am UNE RD a? od by BLU in Miami NOM GHA] ciseteceor BLU on ia Tensantace etade por BLU em lam | Montado Nyce Gulpar BLU a Mam | Assemble PL LOOT OS 0 amt AAC a Ry YAS 02 an n

4 eer ere EabeleeEocation

a ome aan mM En ae Hil fTHITAS OF 001 06 08 02 09 0S Ov OE 02 OF See OAL es:

ISOG o DUUATHRLATTEUCCUTGGNIALATITUCVOOOATITULCeeOvITU TTOMVITTCUOVIITTOGsATICenaITTVcrvvT Tenn Lee eo ef 0Z Of OF 0S 09 O/ 08.

aatiaie 3, Ss Baec wees S|

| j ] | | |

C5266091_X10_Ed.2 BLU Products, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020-05-05 Subject: Request for Confidentiality FCC ID: YHLBLUC620 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Long-Term Confidentiality Short-Term Confidentiality NOTE 2 Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info No No No No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Wei Zeng Title: Senior Manager 1/1

BLU Products, Inc. 10814 NW 33rd St # 100 Doral, FL 33172 ,USA Declaration of Differences Date: 2020/06/12 We the undersigned hereby confirm that any of our production units (FCC ID :YHLBLUC620) bearing the following model numbers are identical in circuitry and electrical; The difference is that the camera appearance looks different and the memory is different. Production name Trade Mark Model No. Mobile Phone BLU C6 2020 Mobile Phone BLU J6 2020 Differences Camera Storage 16G Camera Storage 32G Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours,

Signature Contact Person: Wei Zeng Company: BLU Products, Inc. E-mail: zwei@ctasiasz.com

C5266091_X8_Ed.1 BLU Products, Inc. Letter of Authorization C6 2020, J6 2020 BLU Products, Inc. 10814 NW 33rd St # 100 Doral, FL 33172 ,USA Company:

Address:

Product Name: Mobile Phone Model Number:

FCC Identifier: YHLBLUC620 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wei Zeng Title: Senior Manager Date: 2020-06-09 Signature of applicant:

1/1