all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals | photos |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 | Users Manual | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | Users Manual | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | Internal Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | External Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | BOM | Parts List/Tune Up Info | May 30 2019 | confidential | ||||
1 2 3 4 | Block Diagram | Block Diagram | May 30 2019 | confidential | ||||
1 2 3 4 | Cover Letter(s) | May 30 2019 | ||||||
1 2 3 4 | Cover Letter(s) | May 30 2019 | ||||||
1 2 3 4 | Test Setup Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | ID Label/Location Info | May 30 2019 | ||||||
1 2 3 4 | Operation Description | Operational Description | May 30 2019 | confidential | ||||
1 2 3 4 | Cover Letter(s) | May 30 2019 | ||||||
1 2 3 4 | Schematics | Schematics | May 30 2019 | confidential | ||||
1 2 3 4 | Cover Letter(s) | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Tune-up tolerance | Parts List/Tune Up Info | May 30 2019 | confidential | ||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Setup Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 | Test Setup Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 |
|
Annex C Plots of System Performance Check | RF Exposure Info | 357.84 KiB | May 30 2019 | |||
1 2 3 4 |
|
Annex D Plots of Maximum SAR Test Results | RF Exposure Info | 680.87 KiB | May 30 2019 | |||
1 2 3 4 |
|
Annex E1 DASY Calibration Certificate SN3823 | RF Exposure Info | 4.59 MiB | May 30 2019 | |||
1 2 3 4 |
|
Annex E2 DASY Calibration Certificate SN7445 | RF Exposure Info | 4.41 MiB | May 30 2019 | |||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 |
|
Annex E4 DASY Calibration Certificate D750V3 | RF Exposure Info | 4.35 MiB | May 30 2019 | |||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 |
|
Annex E7 DASY Calibration Certificate D1900V2 | RF Exposure Info | 4.13 MiB | May 30 2019 | |||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 | RF Exposure Info | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Setup Photos | May 30 2019 / October 22 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Report | May 30 2019 | ||||||
1 2 3 4 | Test Setup Photos | May 30 2019 / October 22 2019 |
1 2 3 4 | Annex C Plots of System Performance Check | RF Exposure Info | 357.84 KiB | May 30 2019 |
REPORT No.SZ19040180S01 Annex C Plots of System Performance Check MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.06 System Check_750MHz_Head_190506 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; = 0.883 S/m; r = 40.813; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.03, 10.03, 10.03); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.08 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 49.15 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 2.83 W/kg SAR(1 g) = 2.1 W/kg; SAR(10 g) = 1.41 W/kg Maximum value of SAR (measured) = 2.09 W/kg 0 dB = 2.08 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.07 System Check_750MHz_Body_190507 Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: MSL_750 Medium parameters used: f = 750 MHz; = 0.962 S/m; r = 53.914; = 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.05, 10.05, 10.05); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.22 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 66.33 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 4.87 W/kg SAR(1 g) = 2.15 W/kg; SAR(10 g) = 1.45 W/kg Maximum value of SAR (measured) = 3.20 W/kg 0 dB = 3.22 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.05 System Check_835MHz_Head_190505 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL_835 Medium parameters used: f = 835 MHz; = 0.866 S/m; r = 43.51; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.1 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.32, 9.32, 9.32); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW835/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.55 W/kg CW835/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 54.85 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.36 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 2.55 W/kg 0 dB = 2.55 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 System Check_835MHz_Body_190501 Communication System: UID 0, CW (0); Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_835 Medium parameters used: f = 835 MHz; = 0.98 S/m; r = 55.749; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 835/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.61 W/kg CW 835/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.16 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.53 W/kg SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 2.61 W/kg 0 dB = 2.61 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.30 System Check_1800MHz_Head_190430 Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; = 1.394 S/m; r = 39.43; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.98, 7.98, 7.98); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1800/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 10.6 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 86.16 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 16.7 W/kg SAR(1 g) = 9.53 W/kg; SAR(10 g) = 4.95 W/kg Maximum value of SAR (measured) = 10.3 W/kg 0 dB = 10.6 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 System Check_1800MHz_Body_190429 Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: MSL_1800 Medium parameters used: f = 1800 MHz; = 1.594 S/m; r = 53.67; = 1000 kg/m3 Ambient Temperature23.3 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.65, 7.65, 7.65); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW1800/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.5 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 88.25 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 21.5 W/kg SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.12 W/kg Maximum value of SAR (measured) = 12.2 W/kg 0 dB = 12.5 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 System Check_1900MHz_Head_190501 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1900 MHz; = 1.336 S/m; r = 41.315; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.68, 7.68, 7.68); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 1900/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 11.0 W/kg CW 1900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 90.16 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 17.8 W/kg SAR(1 g) = 9.78 W/kg; SAR(10 g) = 5.2 W/kg Maximum value of SAR (measured) = 10.9 W/kg 0 dB = 11.0 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 System Check_1900MHz_Head_190429 Communication System: UID 0, CW (0); Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900 Medium parameters used: f = 1900 MHz; = 1.518 S/m; r = 54.556; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/CW 1900/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.0 W/kg Configuration/CW 1900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 91.84 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 20.8 W/kg SAR(1 g) = 10.4 W/kg; SAR(10 g) = 5.4 W/kg Maximum value of SAR (measured) = 12.8 W/kg 0 dB = 13.0 W/kg = 11.14 dBW/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.08 System Check_2450MHz_Head_190508 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; = 1.866 S/m; r = 37.919; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.34, 7.34, 7.34); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW2450/Area Scan (71x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 17.1 W/kg CW2450/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.39 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 30.5 W/kg SAR(1 g) = 13.6 W/kg; SAR(10 g) = 6.2 W/kg Maximum value of SAR (measured) = 15.4 W/kg 0 dB = 17.1 W/kg = 12.33 dBW/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.08 System Check_2450MHz_Body_190508 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450 Medium parameters used: f = 2450 MHz; = 2.031 S/m; r = 50.65; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.15, 7.15, 7.15); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 2450/Area Scan (101x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 15.4 W/kg CW 2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 86.67 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 28.4 W/kg SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.18 W/kg Maximum value of SAR (measured) = 15.4 W/kg 0 dB = 15.4 W/kg
1 2 3 4 | Annex D Plots of Maximum SAR Test Results | RF Exposure Info | 680.87 KiB | May 30 2019 |
REPORT No.SZ19040180S01 Annex D Plots of Maximum SAR Test Results MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.05 GSM850_GPRS( 2TX slots)_Left Cheek_Ch251 Communication System: UID 0, GSM850(class 10) (0); Frequency: 848.8 MHz;Duty Cycle: 1:4.15 Medium: HSL_835 Medium parameters used: f = 849 MHz; = 0.884 S/m; r = 43.3; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.1 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.32, 9.32, 9.32); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch251/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.249 W/kg Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.976 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.284 W/kg SAR(1 g) = 0.234 W/kg; SAR(10 g) = 0.183 W/kg Maximum value of SAR (measured) = 0.246 W/kg 0 dB = 0.249 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 GSM1900_GPRS( 3TX slots)_Right Cheek_Ch661 Communication System: UID 0, PCS1900(class 11) (0); Frequency: 1880 MHz;Duty Cycle: 1:2.77 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; = 1.321 S/m; r = 41.384; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.68, 7.68, 7.68); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch661/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0420 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.363 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.0650 W/kg SAR(1 g) = 0.040 W/kg; SAR(10 g) = 0.024 W/kg Maximum value of SAR (measured) = 0.0428 W/kg 0 dB = 0.0420 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; = 1.321 S/m; r = 41.384; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.68, 7.68, 7.68); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch9400/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.355 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.079 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.160 W/kg SAR(1 g) = 0.077 W/kg; SAR(10 g) = 0.045 W/kg Maximum value of SAR (measured) = 0.150 W/kg 0 dB = 0.150 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.30 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1312 Communication System: UID 0, UMTS-FDD (0); Frequency: 1712.4 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1712.4 MHz; = 1.328 S/m; r = 39.884; =
1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.98, 7.98, 7.98); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1312/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.379 W/kg Ch1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.242 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.202 W/kg SAR(1 g) = 0.133 W/kg; SAR(10 g) = 0.080 W/kg Maximum value of SAR (measured) = 0.150 W/kg 0 dB = 0.379 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.05 WCDMA Band V_RMC 12.2Kbps_Left Cheek_Ch4132 Communication System: UID 0, UMTS-FDD (0); Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: HSL_835 Medium parameters used: f = 826.4 MHz; = 0.859 S/m; r = 43.6; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.1 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.32, 9.32, 9.32); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch4132/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.134 W/kg Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.397 V/m; Power Drift = 0.50 dB Peak SAR (extrapolated) = 0.155 W/kg SAR(1 g) = 0.128 W/kg; SAR(10 g) = 0.101 W/kg Maximum value of SAR (measured) = 0.134 W/kg 0 dB = 0.134 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 LTE Band 2 _20MHz_QPSK_1RB_99Offset_Right Cheek_Ch18900 Communication System: UID 0, LTE (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1880 MHz; = 1.321 S/m; r = 41.384; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.68, 7.68, 7.68); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch18900/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0660 W/kg Ch18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.614 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.0950 W/kg SAR(1 g) = 0.060 W/kg; SAR(10 g) = 0.037 W/kg Maximum value of SAR (measured) = 0.0640 W/kg 0 dB = 0.0660 W/kg = -11.80 dBW/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.30 LTE Band 4_20MHz_QPSK_1RB_49Offset_Right Cheek_Ch20175 Communication System: UID 0, LTE (0); Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1732.5 MHz; = 1.342 S/m; r = 39.642; =
1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.4 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.98, 7.98, 7.98); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20175/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.122 W/kg Ch20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.786 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.167 W/kg SAR(1 g) = 0.112 W/kg; SAR(10 g) = 0.074 W/kg Maximum value of SAR (measured) = 0.118 W/kg 0 dB = 0.122 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.05 LTE Band 5_10MHz_QPSK_1RB_49Offset_Left Cheek_Ch20525 Communication System: UID 0, LTE (0); Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: HSL_835 Medium parameters used: f = 836.5 MHz; = 0.871 S/m; r = 43.433; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.1 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.32, 9.32, 9.32); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20525/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.134 W/kg Ch20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.483 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.154 W/kg SAR(1 g) = 0.128 W/kg; SAR(10 g) = 0.099 W/kg Maximum value of SAR (measured) = 0.133 W/kg 0 dB = 0.134 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.06 LTE Band 12_10MHz_QPSK_1RB_25Offset_Right Cheek_Ch23130 Communication System: UID 0, LTE (0); Frequency: 711 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 711 MHz; = 0.863 S/m; r = 41.689; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.03, 10.03, 10.03); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23130/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0323 W/kg Ch23130/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.497 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 0.0380 W/kg SAR(1 g) = 0.031 W/kg; SAR(10 g) = 0.024 W/kg Maximum value of SAR (measured) = 0.0321 W/kg 0 dB = 0.0323 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.06 LTE Band 17_10MHz_QPSK_1RB_49Offset_Right Cheek_Ch23790 Communication System: UID 0, LTE (0); Frequency: 710 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 710 MHz; = 0.861 S/m; r = 41.702; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.6 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.03, 10.03, 10.03); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23790/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0349 W/kg Ch23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.146 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.0410 W/kg SAR(1 g) = 0.033 W/kg; SAR(10 g) = 0.026 W/kg Maximum value of SAR (measured) = 0.0346 W/kg 0 dB = 0.0349 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.08 WLAN 2.4GHz_802.11b 1Mbps_Right Cheek_Ch6 Communication System: UID 0, WLAN 2.4GHz 802.11b (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2437 MHz; = 1.845 S/m; r = 37.968; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.34, 7.34, 7.34); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch6/Area Scan (81x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.135 W/kg Ch6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.755 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.326 W/kg SAR(1 g) = 0.132 W/kg; SAR(10 g) = 0.056 W/kg Maximum value of SAR (measured) = 0.154 W/kg 0 dB = 0.135 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 GSM850_GPRS( 2TX slots)_Back Side_10mm_Ch251 Communication System: UID 0, GSM850(class 10) (0); Frequency: 848.8 MHz;Duty Cycle: 1:4.15 Medium: MSL_835 Medium parameters used: f = 849 MHz; = 0.993 S/m; r = 55.699; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch251/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.398 W/kg Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.59 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.658 W/kg SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.225 W/kg Maximum value of SAR (measured) = 0.436 W/kg 0 dB = 0.398 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 GSM1900_GPRS( 3TX slots)_Back Side_10mm_Ch661 Communication System: UID 0, PCS1900(class 11) (0); Frequency: 1880 MHz;Duty Cycle: 1:2.77 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch661/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.342 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.921 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.577 W/kg SAR(1 g) = 0.330 W/kg; SAR(10 g) = 0.175 W/kg Maximum value of SAR (measured) = 0.372 W/kg 0 dB = 0.342 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 WCDMA Band II_RMC 12.2Kbps_Back Side_10mm_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch9400/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.553 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.995 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.909 W/kg SAR(1 g) = 0.528 W/kg; SAR(10 g) = 0.280 W/kg Maximum value of SAR (measured) = 0.597 W/kg 0 dB = 0.553 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 WCDMA Band IV_RMC 12.2Kbps_Back Side_10mm_Ch1312 Communication System: UID 0, UMTS-FDD (0); Frequency: 1712.4 MHz;Duty Cycle: 1:1 Medium: MSL_1800 Medium parameters used: f = 1712.4 MHz; = 1.51 S/m; r = 53.827; = 1000 kg/m3 Ambient Temperature23.3 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.65, 7.65, 7.65); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1312/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.705 W/kg Ch1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.635 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.674 W/kg; SAR(10 g) = 0.385 W/kg Maximum value of SAR (measured) = 0.701 W/kg 0 dB = 0.705 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 WCDMA Band V_RMC 12.2Kbps_Back Side_10mm_Ch4132 Communication System: UID 0, UMTS-FDD (0); Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: MSL_835 Medium parameters used: f = 826.4 MHz; = 0.971 S/m; r = 55.765; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch4132/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.218 W/kg Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.33 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.208 W/kg; SAR(10 g) = 0.163 W/kg Maximum value of SAR (measured) = 0.217 W/kg 0 dB = 0.218 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 LTE Band 2_20MHz_QPSK_1RB_99Offset_Back Side_10mm_Ch18900 Communication System: UID 0, LTE (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch18900/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.681 W/kg Ch18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.813 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.627 W/kg; SAR(10 g) = 0.326 W/kg Maximum value of SAR (measured) = 0.712 W/kg 0 dB = 0.681 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 LTE Band 4_20MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch20175 Communication System: UID 0, LTE (0); Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: MSL_1800 Medium parameters used: f = 1732.5 MHz; = 1.529 S/m; r = 53.79; = 1000 kg/m3 Ambient Temperature23.3 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.65, 7.65, 7.65); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20175/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.840 W/kg Ch20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.290 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.732 W/kg; SAR(10 g) = 0.408 W/kg Maximum value of SAR (measured) = 0.811 W/kg 0 dB = 0.840 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 LTE Band 5_10MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch20525 Communication System: UID 0, LTE (0); Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: MSL_835 Medium parameters used: f = 836.5 MHz; = 0.982 S/m; r = 55.79; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20525/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.254 W/kg Ch20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.14 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.425 W/kg SAR(1 g) = 0.251 W/kg; SAR(10 g) = 0.144 W/kg Maximum value of SAR (measured) = 0.275 W/kg 0 dB = 0.254 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.07 LTE Band 12_10MHz_QPSK_1RB_25Offset_Back Side_10mm_Ch23130 Communication System: UID 0, LTE (0); Frequency: 711 MHz;Duty Cycle: 1:1 Medium: MSL_750 Medium parameters used: f = 711 MHz; = 0.935 S/m; r = 54.84; = 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.05, 10.05, 10.05); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23130/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.117 W/kg Ch23130/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.13 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.133 W/kg SAR(1 g) = 0.112 W/kg; SAR(10 g) = 0.091 W/kg Maximum value of SAR (measured) = 0.117 W/kg 0 dB = 0.117 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.07 LTE Band 17_10MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch23790 Communication System: UID 0, LTE (0); Frequency: 710 MHz;Duty Cycle: 1:1 Medium: MSL_750 Medium parameters used: f = 710 MHz; = 0.933 S/m; r = 54.86; = 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.05, 10.05, 10.05); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23790/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.118 W/kg Ch23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.35 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.134 W/kg SAR(1 g) = 0.114 W/kg; SAR(10 g) = 0.092 W/kg Maximum value of SAR (measured) = 0.118 W/kg 0 dB = 0.118 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.08 WLAN2.4GHz_802.11b 1Mbps_Back Side_10mm_Ch6 Communication System: UID 0, WLAN 2.4GHz 802.11b (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450 Medium parameters used: f = 2437 MHz; = 2.019 S/m; r = 50.692; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.15, 7.15, 7.15); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch6/Area Scan (71x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0222 W/kg Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.797 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.0690 W/kg SAR(1 g) = 0.025 W/kg; SAR(10 g) = 0.013 W/kg Maximum value of SAR (measured) = 0.0244 W/kg 0 dB = 0.0222 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 GSM850_GPRS( 2TX slots)_Back Side_10mm_Ch251 Communication System: UID 0, GSM850(class 10) (0); Frequency: 848.8 MHz;Duty Cycle: 1:4.15 Medium: MSL_835 Medium parameters used: f = 849 MHz; = 0.993 S/m; r = 55.699; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch251/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.398 W/kg Ch251/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.59 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.658 W/kg SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.225 W/kg Maximum value of SAR (measured) = 0.436 W/kg 0 dB = 0.398 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 GSM1900_GPRS( 3TX slots)_Bottom Side_10mm_Ch661 Communication System: UID 0, PCS1900(class 11) (0); Frequency: 1880 MHz;Duty Cycle: 1:2.77 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch661/Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.410 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.51 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.581 W/kg SAR(1 g) = 0.340 W/kg; SAR(10 g) = 0.184 W/kg Maximum value of SAR (measured) = 0.380 W/kg 0 dB = 0.410 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 WCDMA Band II_RMC 12.2Kbps_Bottom Side_10mm_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch9262/Area Scan (41x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.710 W/kg Ch9262/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.43 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.980 W/kg SAR(1 g) = 0.573 W/kg; SAR(10 g) = 0.306 W/kg Maximum value of SAR (measured) = 0.640 W/kg 0 dB = 0.710 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 WCDMA Band IV_RMC 12.2Kbps_Back Side_10mm_Ch1312 Communication System: UID 0, UMTS-FDD (0); Frequency: 1712.4 MHz;Duty Cycle: 1:1 Medium: MSL_1800 Medium parameters used: f = 1712.4 MHz; = 1.51 S/m; r = 53.827; = 1000 kg/m3 Ambient Temperature23.3 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.65, 7.65, 7.65); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch1312/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.705 W/kg Ch1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.635 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.674 W/kg; SAR(10 g) = 0.385 W/kg Maximum value of SAR (measured) = 0.701 W/kg 0 dB = 0.705 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 WCDMA Band V_RMC 12.2Kbps_Back Side_10mm_Ch4132 Communication System: UID 0, UMTS-FDD (0); Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: MSL_835 Medium parameters used: f = 826.4 MHz; = 0.971 S/m; r = 55.765; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch4132/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.218 W/kg Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.33 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.253 W/kg SAR(1 g) = 0.208 W/kg; SAR(10 g) = 0.163 W/kg Maximum value of SAR (measured) = 0.217 W/kg 0 dB = 0.218 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 LTE Band 2_20MHz_QPSK_1RB_99Offset_Back Side_10mm_Ch18900 Communication System: UID 0, LTE (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: MSL_1900 Medium parameters used: f = 1880 MHz; = 1.497 S/m; r = 54.63; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.5 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.4, 7.4, 7.4); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch18900/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.681 W/kg Ch18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.813 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.627 W/kg; SAR(10 g) = 0.326 W/kg Maximum value of SAR (measured) = 0.712 W/kg 0 dB = 0.681 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.04.29 LTE Band 4_20MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch20175 Communication System: UID 0, LTE (0); Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: MSL_1800 Medium parameters used: f = 1732.5 MHz; = 1.529 S/m; r = 53.79; = 1000 kg/m3 Ambient Temperature23.3 ; Liquid Temperature22.3 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.65, 7.65, 7.65); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20175/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.840 W/kg Ch20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.290 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.732 W/kg; SAR(10 g) = 0.408 W/kg Maximum value of SAR (measured) = 0.811 W/kg 0 dB = 0.840 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.01 LTE Band 5_10MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch20525 Communication System: UID 0, LTE (0); Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: MSL_835 Medium parameters used: f = 836.5 MHz; = 0.982 S/m; r = 55.79; = 1000 kg/m3 Ambient Temperature23.1 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(9.24, 9.24, 9.24); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch20525/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.254 W/kg Ch20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.14 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.425 W/kg SAR(1 g) = 0.251 W/kg; SAR(10 g) = 0.144 W/kg Maximum value of SAR (measured) = 0.275 W/kg 0 dB = 0.254 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.07 LTE Band 12_10MHz_QPSK_1RB_25Offset_Back Side_10mm_Ch23130 Communication System: UID 0, LTE (0); Frequency: 711 MHz;Duty Cycle: 1:1 Medium: MSL_750 Medium parameters used: f = 711 MHz; = 0.935 S/m; r = 54.84; = 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.05, 10.05, 10.05); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23130/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.117 W/kg Ch23130/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.13 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.133 W/kg SAR(1 g) = 0.112 W/kg; SAR(10 g) = 0.091 W/kg Maximum value of SAR (measured) = 0.117 W/kg 0 dB = 0.117 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.07 LTE Band 17_10MHz_QPSK_1RB_49Offset_Back Side_10mm_Ch23790 Communication System: UID 0, LTE (0); Frequency: 710 MHz;Duty Cycle: 1:1 Medium: MSL_750 Medium parameters used: f = 710 MHz; = 0.933 S/m; r = 54.86; = 1000 kg/m3 Ambient Temperature23.5 ; Liquid Temperature22.2 DASY5 Configuration:
- Probe: EX3DV4 - SN7445; ConvF(10.05, 10.05, 10.05); Calibrated: 2018.09.04;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch23790/Area Scan (71x131x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.118 W/kg Ch23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.35 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.134 W/kg SAR(1 g) = 0.114 W/kg; SAR(10 g) = 0.092 W/kg Maximum value of SAR (measured) = 0.118 W/kg 0 dB = 0.118 W/kg Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2019.05.08 WLAN2.4GHz_802.11b 1Mbps_Back Side_10mm_Ch6 Communication System: UID 0, WLAN 2.4GHz 802.11b (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: MSL_2450 Medium parameters used: f = 2437 MHz; = 2.019 S/m; r = 50.692; = 1000 kg/m3 Ambient Temperature23.2 ; Liquid Temperature22.7 DASY5 Configuration:
- Probe: EX3DV4 - SN3823; ConvF(7.15, 7.15, 7.15); Calibrated: 2018.11.12;
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn480; Calibrated: 2018.10.29
- Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1471
- Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Ch6/Area Scan (71x121x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0222 W/kg Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.797 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.0690 W/kg SAR(1 g) = 0.025 W/kg; SAR(10 g) = 0.013 W/kg Maximum value of SAR (measured) = 0.0244 W/kg 0 dB = 0.0222 W/kg
1 2 3 4 | Annex E1 DASY Calibration Certificate SN3823 | RF Exposure Info | 4.59 MiB | May 30 2019 |
REPORT No.SZ19040180S01 Annex E DASY Calibration Certificate MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn
1 2 3 4 | Annex E4 DASY Calibration Certificate D750V3 | RF Exposure Info | 4.35 MiB | May 30 2019 |
Add: No.5 1 Xueyuan Road, HaTel: +86-10-62304633-2079 dichna N CALIBRATION1In1` N411114 11191V CNAS L0570d' Fax '+86110-b23046002 04 China E-mail: cttlachinattl ?com http://www.chinattl.en C l i e n t K E H U C e r t i f i c a t e N o : Z 1 8 ?6 0 1 9 4 CAL-1Li1 N CERTIFICATE O b j e c t D 7 5 0 V 3 - S N :
1 1 7 3 C a l i b r a t i o n P r o c e d u r e ( s ) F F - Z 1 1 - 0 0 3 - 0 1 Calibration Procedures for dipole validation kits C a l i b r a t i o n d a t e : J u n e 2 1 , 2 0 1 8 T h i s c a l i b r a t i o n C e r t i f i c a t e d o c u m e n t s t h e t r a c e a b i l i t y t o n a t i o n a l s t a n d a r d s , w h i c h r e a l i z e t h e p h y s i c a l u n i t s o f m e a s u r e m e n t s ( S I ) . T h e m e a s u r e m e n t s a n d t h e u n c e r t a i n t i e s w i t h c o n f i d e n c e p r o b a b i - i t y a r e g i v e n o n t h e f o l l o w i n g p a g e s a n d a r e p a r t o f t h e c e r t i f i c a t e . A l l c a l i b r a t i o n s h a v e b e e n c o n d u c t e d i n t h e c l o s e d l a b o r a t o r y f a c i l i t y : e n v i r o n m e n t t e m p e r a t u r e ( 2 2 3 ) C a n d h u m i d i t y < 7 0 % . C a l i b r a t i o n E q u i p m e n t u s e d ( M& T E c r i t i c a - f o r c a l i b r a t i o n ) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Schedu ed Calibration Power Meter NRVD Power sensor NRV-Z5 Reference Probe EX3DV4 DAE4 1 0 2 0 8 3 0 1 - N o v - 1 7 ( C T T L , N o . J 1 7 X 0 8 7 5 6 ) O c t - 1 8 1 0 0 5 4 2 0 1 - N o v - 1 7 ( C T T L , N o . J 1 7 X 0 8 7 5 6 ) O c t - 1 8 SN 7464 12-Sep?1 7(S PEAG, No. EX3-7464-Sep17) Sep-18 SN 1525 02ct-17(SPEAG,No.DAE4-1525ctl7) Oct-18 Secondary Standards S i g n a l G e n e r a t o r E 4 4 3 8 C N e t w o r k A n a l y z e r E 5 0 7 1 C ID # Ca Date(Ca librated by, Certificate No.) Schedu ed Ca libration MY4 9 0 7 1 4 3 0 2 3 - J a n - 1 8 ( C T T L , No . J I 8 X0 0 5 6 0 ) J a n - 1 9 MY4 6 1 1 0 6 7 3 2 4 - J a n - 1 8 ( CT TL, No . J 1 8 X0 0 5 6 1 ) J a n - 1 9 N a m e F u n c t i o n . S i g n a t u r e Calibrated by Reviewed by Approved by Issued: June 26, 2018 Th is calibration certificate sha l l not be reproduced except in full without written approval of the laboratory. C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 1 o f 8 I n C o l l a b o r a t i o n w i t h CAUBRA71ON LABORATORY Add: N ?51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinatti.cn G s s a r y :
T S L t i s s u e s - m u l a t i n g q u i d C o n v F s e n s i t i v i t y i n T S L I N O R M x , y , z N / A n o t a p p l i c a b l e o r n o t m e a s u r e d C a l i b r a t i o n i s P e r f o r m e d A c c o r d i n g t o t h e F o l l o w i n g S t a n d a r d s :
a ) I E E E S t d 1 5 2 8 - 2 0 1 3 , " I E E E R e c o m m e n d e d P r a c t i c e f o r D e t e r m i n i n g t h e P e a k S p a t i a A v e r a g e d S p e c i f i c A b s o r p t i o n R a t e ( S A R ) i n t h e H u m a n H e a d f r o m W i r e l e s s C o m m u n i c a t i o n s D e v i c e s : M e a s u r e m e n t T e c h n q u e s " , J u n e 2 0 1 3 b ) I E C 6 2 2 0 9 - 1 , " M e a s u r e m e n t p r o c e d u r e f o r a s s e s s m e n t o f s p e c i f i c a b s o r p t i o n r a t e o f h u m a n e x p o s u r e t o r a d i o f r e q u e n c y f i e l d s f r o m h a n d - h e l d a n d b o d y - m o u n t e d w i r e l e s s c o m m u n i c a t i o n d e v i c e s - P a r t 1 : D e v i c e u s e d n e x t t o t h e e a r ( F r e q u e n c y r a n g e o f 3 0 0 M H z t o 6 G H z ) " , J u l y 2 0 1 6 c ) I E C 6 2 2 0 9 - 2 , " P r o c e d u r e t o m e a s u r e t h e S p e c i f i c A b s o r p t i o n R a t e ( S A R ) F o r w i r e l e s s c o m m u n i c a t i o n d e v i c e s u s e d i n c l o s e p r o x i m i t y t o t h e h u m a n b o d y ( f r e q u e n c y r a n g e o f 3 0 M H z t o 6 G H z ) " , M a r c h 2 0 1 0 d ) K D B 8 6 5 6 6 4 , S A R M e a s u r e m e n t R e q u i r e m e n t s f o r 1 0 0 M H z t o 6 G H z Additional Documentation:
e) DASY4/5 System Handbook M e t h o d s A p p l i e d a n d I n t e r p r e t a t i o n o f P a r a m e t e r s :
. M e a s u r e m e n t C o n d i t i o n s : F u r t h e r d e t a i l s a r e a v a i l a b l e f r o m t h e V a l i d a t i o n R e p o r t a t t h e e n d o f t h e c e r t i f i c a t e . A l l f i g u r e s s t a t e d i n t h e c e r t i f i c a t e a r e v a l i d a t t h e f r e q u e n c y i n d c a t e d . A n t e n n a P a r a m e t e r s w i t h T S L : T h e d i p o l e i s m o u n t e d w i t h t h e s p a c e r t o p o s i t i o n i t s f e e d p o i n t e x a c t l y b e l o w t h e c e n t e r m a r k i n g o f t h e f l a t p h a n t o m s e c t i o n , w i t h t h e a r m s o r i e n t e d p a r a l l e l t o t h e b o d y a x i s . F e e d P o i n t I m p e d a n c e a n d R e t u r n L o s s : T h e s e p a r a m e t e r s a r e m e a s u r e d w i t h t h e d i p o l e p o s i t i o n e d u n d e r t h e l i q u i d f i l l e d p h a n t o m ?T h e i m p e d a n c e s t a t e d s t r a n s f o r m e d f r o m t h e m e a s u r e m e n t a t t h e S M A c o n n e c t o r t o t h e f e e d p o i n t . T h e R e t u r n L o s s e n s u r e s l o w r e f l e c t e d p o w e r . N o u n c e r t a i n t y r e q u i r e d
. E l e c t r i c a l D e l a y : O n e - w a y d e l a y b e t w e e n t h e S M A c o n n e c t o r a n d t h e a n t e n n a f e e d p o i n t . N o u n c e r t a i n t y r e q u i r e d . S A m e a s u r e d : S A R m e a s u r e d a t t h e s t a t e d a n t e n n a i n p u t p o w e r . S A n o r m a l i z e d : S A R a s m e a s u r e d , n o r m a l i z e d t o a n i n p u t p o w e r o f 1 W a t t h e a n t e n n a connector. S A R f o r n o m i n a l T S L p a r a m e t e r s : T h e m e a s u r e d T S L p a r a m e t e r s a r e u s e d t o c a l c u l a t e t h e nom inal SAR resu lt. T h e r e p o r t e d u n c e r t a i n t y o f m e a s u r e m e n t i s s t a t e d a s t h e s t a n d a r d u n c e r t a i n t y o f M e a s u r e m e n t m u l t i p l i e d b y t h e c o v e r a g e f a c t o r k = 2 , w h i c h f o r a n o r m a l d i s t r i b u t i o n C o r r e s p o n d s t o a c o v e r a g e p r o b a b i l i t y o f a p p r o x i m a t e l y 9 5 %
C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 2 o f 8
- n C o l l a b o r a t i o n w i n
;
m 1 l Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10?62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn M e a s u r e m e n t C o n d i t i o n s 9 9 D f 1 P D A S Y V e r s i o n 4 9 D A S Y 5 2 9 D 9 5 2 . 1 0 . 1 . 1 4 7 6 E x t r a p o l a t i o n P a h n t o m 4 A d v a n c e d E x t r a p o l a t i o n T r i p l e F l a t P a h n t o m 5
. 1 C w i t h S p a c e r D i s t a n c e D i p o l e C e n t e r 4
-
T S L 1 5 m m Z o o m S a n c m m R e
=
o u o n d x d y d 5 z s l t i
,
, M H z I I 1 M H z F q u n y 7 5 0 1 c e e r H e a d T S L p a r a m e t e r s SAR result with Head TSL Cond ition SAR averaged over 1 cm3 (1 g) of Head TSL S A R m e a s u r e d 250 mW input power 2 . 0 2 m W / g SAR f or nom i na l He a d TSL pa r a me t e r s norma l ized to 1W 8. 26mW/ g18. 8 % ( k=2) SAR averaged over 10 cm3 (10 g) of Head TSL Condition S A R m e a s u r e d 250 mW input power 1.34mW/g S A R f o r n o m i n a l H e a d T S L p a r a m e t e r s n o r ma l i z e d t o 1 W 5 . 4 5 m W / g 1 8 . 7 % ( k = 2 B o d y T S L p a r a m e t e r s S A R r e s u l t w i t h B o d y T S L S A R a v e r a g e d o v e r 1 C m 3 ( 1 g ) o f B o d y T S L C o n d i t i o n S A R m e a s u r e d 2 5 m W I n p u t p w e r 2 1 3 m W g SAR for nomina Body TSL parameters normalized to 1W 1 8. 65 mW /g18. 8 % (k=2) I SAR averaged over 10 cm3 (10 g) of Body TSL S A R m e a s u r e d 2 5 0 m W i n p u t p o w e r 1 . 4 1 m W / g SAR for nom ina l Body TSL parameters C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 3 o f 8 I n C o l l a b o r a t i o n w i t h c A u I A Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86 10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn A p p e n d i x ( A d d i t i o n a l a s s e s s m e n t s o u t s i d e t h e s c o p e o f C N A S L 0 5 7 0 ) A n t e n n a P a r a m e t e r s w i t h H e a d T S L I mp e d a n c e , t r a n s f o r me d t o f e e d p o i n t Return Loss A n t e n n a P a r a m e t e r s w i t h B o d y T S L I mp e d a n c e , t r a n s f o r me d t o f e e d p o i n t R e t u r n L o s s 55.20-3.01j0
-
2 4
. 9 d B 52. 30- 4. 51j 0
-26.1 dB G e n e r a l A n t e n n a P a r a m e t e r s a n d D e s i g n Electrical Delay (one d irection) ?900 ns A f t e r l o n g t e r m u s e w i t h 1 0 0 W r a d i a t e d p o w e r , o n l y a s l i g h t w a r m i n g o f t h e d i p o l e n e a r t h e f e e d p o i n t c a n b e m e a s u r e d . T h e d i p o l e i s m a d e o f s t a n d a r d s e m i r i g i d c o a x i a l c a b l e . T h e c e n t e r c o n d u c t o r o f t h e f e e d n g l i n e i s d i r e c t l y c o n n e c t e d t o t h e s e c o n d a r m o f t h e d i p o l e . T h e a n t e n n a i s t h e r e f o r e s h o r t - c i r c u i t e d f o r D C - s i g n a l s . O n s o m e o f t h e d i p o l e s , s m a l l e n d c a p s a r e a d d e d t o t h e d i p o l e a r m s i n o r d e r t o i m p r o v e m a t c h i n g w h e n l o a d e d a c c o r d i n g t o t h e p o s i t i o n a s e x p l a i n e d i n t h e " M e a s u r e m e n t C o n d i t i o n s " p a r a g r a p h . T h e S A R d a t a a r e n o t a f f e c t e d b y t h i s c h a n g e . T h e o v e r a l l d i p e l e n g t h i s s t i l l a c c o r d i n g t o t h e S t a n d a r d . N o e x c e s s i v e f o r c e m u s t b e a p p l i e d t o t h e d i p o l e a r m s , b e c a u s e t h e y m i g h t b e n d o r t h e s o l d e r e d c o n n e c t i o n s n e a r t h e f e e d p o i n t m a y b e d a m a g e d . Additional EUT Data M a n u f a c t u r e d b y I S P E A G C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 4 o f 8 In Collaboration with c1II*, -Nt-',,k,IA 7 o1:-4LA Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn D A S Y 5 V a l i d a t i o n R e p o r t f o r H e a d T S L D a t e : 0 6 . 2 1 . 2 0 1 8 Test Laboratory: CTTL, Beijing, China DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 - SN: 1173 Communication System: UID 0, CW; Frequency: 750 MHz; Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; a = 0.869 S/m; sr = 42.6; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration:
Probe: EX3DV4 - SN7464; ConvF(10.57, 10.57, 10.57) @ 750 MHz; Calibrated:
9/12/2017 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1525; Calibrated: 10/2/2017 Phantom: MFP-V5.1 C ; Type: QD 000 P5I CA; Serial: 1062 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.1 1
(7439) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.00 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 3.05 W/kg SAR(1 g) = 2.02 W/kg; SAR(10 g) = 1.34 W/kg Maximum value of SAR (measured) = 2.70 W/kg
-2.00
-4.00
-
6
. m
-
8 m
-1m 0 dB = 2.70 W/kg = 4.31 dBW/kg C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 5 o f 8 I n C o l l a b o r a t i o n w i t h CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn I m p e d a n c e M e a s u r e m e n t P t f o r H e a d T S L T r l S 1 1 L O g M a g 1 0 . 0 0 d R e f 0 . 0 0 0 d B [ F 1 D e l ]
5 i 6 6 i i i 6 6 i 3 I I 4 0
. 0 0 2 0 1 0
. 0 1 0 . 0 0 1 I 3
-
4 0
. 0 0 5
-
0 0 0 1 _
. 1 M S 1 1 S m i t h ( R + j x ) s c a l e 1 . 0 0 0 u [ F 1 D e l ]
> 1 7 5 0 . 0 0 0 0 0 M H z 5 5 . 1 6 7 3 . 0 1 1 1 1 S t M
. 5 5 0 I F w 1 0 0 H t
'
S O o o 9 5 0 i z C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 6 o f 8 I n C o l l a b o r a t i o n w i t h 7 o f _ 1 1 I ' . : 7 _ i I I L O ] I , ' l N J l ' ; * :
7 Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn D A S Y 5 V a l i d a t i o n R e p o r t f o r B o d y T S L D a t e : 0 6 . 2 1 . 2 0 1 8 Test Laboratory: CTTL, Beijing, China DUT: Dipole 750 MHz; Type: D750V3; Serial: D750V3 ?SN: 1173 Communication System: UID 0, CW; Frequency: 750 MHz; Duty Cycle: 1:1 Medium parameters used: f = 750 MHz; 6 = 0.936 S/m; sr = 54.56; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration:
Probe: EX3DV4 ?SN7464; ConvF(10.63, 10.63, 10.63) @ 750 MHz; Calibrated:
9/12/2017 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1525; Calibrated: 10/2/2017 Phantom: MFP-V5. I C ; Type: QD 000 P51 CA; Serial: 1062 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11
(7439) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.99 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.14 W/kg SAR(1 g) = 2.13 W/kg; SAR(10 g) = 1.41 W/kg Maximum value of SAR (measured) = 2.80 W/kg dB
-1.98
-3.97
-5.95
-7.94
-9?92 0 dB = 2.80 W/kg = 4.47 dBW/kg C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 7 o f 8 In Collaboration with T T 1 d i 5 Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plot for Body TSL T r l S 1 1 L o g Ma g ?1 0 . 0 0 d R e f 0 . 0 0 0 d e [ F 1 D e 5 0
. 0 0 l
>
1 7 5 0
. 0 0 0 0 0 M H Z 2 6
. 0 9 2 d 4 0
. 0 e 0 3 ?
2 1 r 4 0
. 0 0 l 5 0
. 0 0 M s i l s m i t h
(
R
+
j x
) s c a l e 1
. 0 0 0 U
[
F 1 D e
> 1 7 5 0 . 0 0 0 0 0 MH z 5 2 . 3 3 8 4 5 0 9 5 l
]
1 r s t t 9 5 0
'
S W C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 4 P a g e 8 o f 8
1 2 3 4 | Annex E7 DASY Calibration Certificate D1900V2 | RF Exposure Info | 4.13 MiB | May 30 2019 |
-40 - In Collaboration with v r ch M., I "T CALI BRATI ON LABORATORY L ' TWA Add: N ?5 1 Xueyuan Road, Haidian District, Beijing, 100191, China vnLionn i IVI\
Tel: +86-10-62304633-2079 Fax 86-10-62304633-2504 h h, I, %'W"' 1NAb LUO/U E-mail: cttl@chinattl.com http://www.chinattl.cn C l i e n t CALIBRATION CERTIF-CATE K E H U C e r t i f i c a t e N o :
Z 1 8 - 6 0 1 9 7 O b j e c t C a l i b r a t i o n P r o c e d u r e ( s ) Ca- i br at i on Pr oce dur es f or di pol e val i dat i on ki t s C a l i b r a t i o n d a t e T h i s c a l i b r a t i o n C e r t i f i c a t e d o c u m e n t s t h e t r a c e a b i - i t y t o n a t i o n a s t a n d a r d s , w h i c h r e a l i z e t h e p h y s c a l u n i t s o f m e a s u r e m e n t s ( S I ) . T h e m e a s u r e m e n t s a n d t h e u n c e r t a i n t i e s w i t h c o n f i d e n c e p r o b a b i l i t y a r e g i v e n o n t h e f o l l o w i n g p a g e s a n d a r e p a r t o f t h e c e r t i f i c a t e A l l c a l i b r a t i o n s h a v e b e e n c o n d u c t e d i n t h e c l o s e d l a b o r a t o r y f a c i l i t y : e n v i r o n m e n t t e m p e r a t u r e ( 2 2 3 ) C a n d h u m i d i t y < 7 0 % . C a l i b r a t i o n E q u i p m e n t u s e d ( M & T E c r i t i c a l f o r c a l i b r a t i o n ) Primary Standards ID # Cal Date(Cal ibrated by, Certificate N ? Scheduled Calibration P o w e r M e t e r N R V D P o w e r s e n s o r N R V - Z 5 R e f e r e n c e P r o b e E X 3 D V 4 D A E 4 1 0 2 0 8 3 0 1 - N o v - 1 7 ( C T T L , N o . J 1 7 X 0 8 7 5 6 ) O c t - 1 8 1 0 0 5 4 2 0 1 - N o v - 1 7 ( C T T L , N o . J I 7 X 0 8 7 5 6 ) O c t - 1 8 SN 7464 12-Sep-I 7(SPEAG, No. EX3-7464-Sep17) Sep-18 SN 1525 02-Oct-17(SPEAG,No.DAE4-1525_Oct17) Oct-18 S e c o n d a r y S t a n d a r d s Signa-Generator E4438C NetworkAnalyzer E5071 C ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration MY49071430 23- J an- 18 ( CTTL, N ?J 18X00560) J an- 19 MY 4 6 1 1 0 6 7 3 2 4 - J a n - 1 8 ( C T T L , N o . J 1 8 X 0 0 5 6 1 ) J a n - 1 9 N a m e F u n c t i o n S i g n a t u r e C a l i b r a t e d b y :
v Z h a o J i n g S A R T e s t E n g i n e e r f x v f
\
i 7 R e v i e w e d b y A p p r o v e d b y I s s u e d : J u n e 2 6 , 2 0 1 8 T h i s c a l i b r a t i o n c e r t i f i c a t e s h a l l n o t b e r e p r o d u c e d e x c e p t i n f u l l w i t h o u t w r i t t e n a p p r o v a l o f t h e l a b o r a t o r y C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 1 o f 8 I n C o l l a b o r a t i o n w i t h s e CAUBRATION LARORATORY Add: No.5 I Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn s s a r y :
T S L C o n v F s e n s i t i v i t y i n T S L / N O R M x , y , z N / A n o t a p p l i c a b l e o r n o t m e a s u r e d C a l i b r a t i o n i s P e r f o r m e d A c c o r d i n g t o t h e F l o w i n g S t a n d a r d s :
a ) I E E E S t d 1 5 2 8 - 2 0 1 3 , " I E E E R e c o m m e n d e d P r a c t i c e f o r D e t e r m i n i n g t h e P e a k S p a t i a A v e r a g e d S p e c i f i c A b s o r p t i o n R a t e ( S A R n t h e H u m a n H e a d f r o m Wi r e l e s s C o m m u n i c a t i o n s D e v i c e s : M e a s u r e m e n t T e c h n i q u e s " , J u n e 2 0 1 3 b ) I E C 6 2 2 0 9 - 1 , " M e a s u r e m e n t p r o c e d u r e f o r a s s e s s m e n t o f s p e c i f i c a b s o r p t i o n r a t e o f h u m a n e x p o s u r e t o r a d f r e q u e n c y f i e l d s f r o m h a n d - h e l d a n d b o d y - m o u n t e d w - r e l e s s c o m m u n i c a t i o n d e v i c e s - P a r t 1 : D e v i c e u s e d n e x t t o t h e e a r ( F r e q u e n c y r a n g e o f 3 0 0 M H z t o 6 G H z ) " , J u l y 2 0 1 6 c ) I E C 6 2 2 0 9 - 2 , " P r o c e d u r e t o m e a s u r e t h e S p e c i f i c A b s o r p t i o n R a t e ( S A R ) F o r w i r e l e s s c o m m u n i c a t i o n d e v i c e s u s e d i n c l o s e p r o x i m i t y t o t h e h u m a n b o d y ( f r e q u e n c y r a n g e o f 3 0 M H z t o 6 G H z ) " , M a r c h 2 0 1 0 d ) K D B 8 6 5 6 6 4 , S A R M e a s u r e m e n t R e q u i r e m e n t s f o r 1 0 0 M H z t o 6 G H z A d d i t i o n a l D o c u m e n t a t i o n :
e ) D A S Y 4 / 5 S y s t e m H a n d b o o k M e t h o d s A p p - i e d a n d I n t e r p r e t a t i o n o f P a r a m e t e r s :
. M e a s u r e m e n t C o n d i t i o n s : F u r t h e r d e t a i l s a r e a v a i l a b l e f r o m t h e V a l i d a t i o n R e p o r t a t t h e e n d o f t h e c e r t i f i c a t e . A l l f i g u r e s s t a t e d i n t h e c e r t i f i c a t e a r e v a l i d a t t h e f r e q u e n c y i n d i c a t e d . A n t e n n a P a r a m e t e r s w i t h T S L : T h e d i p o l e i s m o u n t e d w i t h t h e s p a c e r t o p o s i t i o n i t s f e e d p o i n t e x a c t l y b e l o w t h e c e n t e r m a r k - n g o f t h e f l a t p h a n t o m s e c t i o n , w i t h t h e a r m s o r i e n t e d p a r a l l e l t o t h e b o d y a x i s . F e e d P o i n t I m p e d a n c e a n d R e t u r n L o s s : T h e s e p a r a m e t e r s a r e m e a s u r e d w i t h t h e d i p o l e p o s i t i o n e d u n d e r t h e l i q u i d f i l l e d p h a n t o m . T h e i m p e d a n c e s t a t e d i s t r a n s f o r m e d f r o m t h e m e a s u r e m e n t a t t h e S M A c o n n e c t o r t o t h e f e e d p o i n t . T h e R e t u r n L o s s e n s u r e s l o w r e f l e c t e d p o w e r . N o u n c e r t a i n t y r e q u i r e d . E l e c t r i c a l D e l a y : O n e - w a y d e l a y b e t w e e n t h e S M A c o n n e c t o r a n d t h e a n t e n n a f e e d p o i n t N o u n c e r t a i n t y r e q u i r e d . S A R m e a s u r e d : S A R m e a s u r e d a t t h e s t a t e d a n t e n n a i n p u t p o w e r . S A R n o r m a l i z e d : S A R a s m e a s u r e d , n o r m a l i z e d t o a n i n p u t p o w e r o f 1 W a t t h e a n t e n n a connector. S A R f o r n o m i n a l T S L p a r a m e t e r s : T h e m e a s u r e d T S L p a r a m e t e r s a r e u s e d t o c a l c u l a t e t h e n o m i n a l S A R r e s u l t . T h e r e p o r t e d u n c e r t a i n t y o f m e a s u r e m e n t i s s t a t e d a s t h e s t a n d a r d u n c e r t a i n t y o f M e a s u r e m e n t m u l t i p l i e d b y t h e c o v e r a g e f a c t o r k = 2 , w h i c h f o r a n o r m a l d s t r i b u t i o n C o r r e s p o n d s t o a c o v e r a g e p r o b a b i l i t y o f a p p r o x i m a t e l y 9 5 %
C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 2 o f 8 I n C o l l a b o r a t i o n w i 1 C A L I B R A T I O N L A B O R A T O R Y 7 z Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10?62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn M e a s u r e m e n t C o n d i t i o n s Q 9 9 1 L 9 9 1 p 9 D A S Y V e r s i o n D A S Y 5 2 5 2 . 1 0 . 1 . 1 4 7 6 E x t r a p o l a t i o n A d v a n c e d E x t r a p o l a t i o n P h l a n t o m D i s t a n c e D i p o l e C e n t e r
-
T S L T r i p l e F l t a P h a n t o m
. 5 1 C 1 0 m m w i t h S p a c e r Z o o m S c a n R e s o l u t i o n d x , d y , d z
=
5 m m F r M H z I M H z 1 9 0 0 1 q u n y c e e H e a d T S L p a r a m e t e r s SAR result with Head TSL SAR averaged over 1 cm3 (1 g) of Head TSL Condition S A R m e a s u r e d 2 5 0 m W i n p u t p o w e r 9 . 7 4 m W / g SAR f o r n o mi n a l He a d T SL p a r a me t e r s norma lized to 1W 39. 5mW/ g18. 8 % ( k=2) S A R a v e r a g e d o v e r 1 0 c m 3 ( 1 0 g ) o f H e a d T S L Condition S A R m e a s u r e d 2 5 0 m W i n p u t p o w e r 5 . 1 0 m W / g SAR for nomina l Head TSL parameters n o r m a l i z e d t o 1 W 20.6 mW /g 18.7 % (k=2) B o d y T S L p a r a m e t e r s S A R S A R a v e r a g e d o v e r 1 C m 3 ( 1 g ) o f B o d y T S L C o n d i t i o n S A R m e a s u r e d 2 5 0 m W n p u t p o w e r I 1 0 . 1 m W / g
?
SAR for nomina l Body TSL parameters normal ized to 1W 39.9 mW /g18.8 % (k=2) T S L B o w i u h d y e s r l t t I SAR averaged over 10 cm3 (10 g) of Body TSL S A R m e a s u r e d 2 5 0 m W i n p u t p o w e r I 5 . 2 1 m W / g 4 SAR for nomina Body TSL parameters normalized to 1W 120.7 mW /g t 18. 7 % (k=2) C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 3 o f 8 L In Collaboration with CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn A p p e n d i x ( A d d i t i o n a - a s s e s s m e n t s o u t s i d e t h e s c o p e o f C N A S L 0 5 7 0 ) A n t e n n a P a r a m e t e r s w i t h H e a d T S L
- mp e d a n c e , t r a n s f o r me d t o f e e d p o i n t R e t u r n L o s s Antenna Parameters with Body TSL I m p e d a n c e , t r a n s f o r m e d t o f e e d p o i n t R e t u r n L o s s G e n e r a - A n t e n n a P a r a m e t e r s a n d D e s i g n 53.40+ 6.62j0
- 22. 9dB 47.40+ 6.65j0
- 22. 7dB A f t e r l o n g t e r m u s e w i t h 1 0 0 W r a d i a t e d p o w e r , o n l y a s i g h t w a r m i n g o f t h e d i p o l e n e a r t h e f e e d p o i n t c a n b e m e a s u r e d . T h e d i p o l e i s m a d e o f s t a n d a r d s e m i r i g i d c o a x i a l c a b l e . T h e c e n t e r c o n d u c t o r o f t h e f e e d i n g i n e i s d i r e c t l y c o n n e c t e d t o t h e s e c o n d a r m o f t h e d i p e . T h e a n t e n n a i s t h e r e f o r e s h o r t - c i r c u i t e d f o r D C - s i g n a l s . O n s o m e o f t h e d i p o l e s , s m a l l e n d c a p s a r e a d d e d t o t h e d i p o l e a r m s i n o r d e r t o i m p r o v e m a t c h i n g w h e n l o a d e d a c c o r d i n g t o t h e p o s i t i o n a s e x p l a i n e d i n t h e " M e a s u r e m e n t C o n d i t i o n s " p a r a g r a p h . T h e S A R d a t a a r e n o t a f f e c t e d b y t h i s c h a n g e . T h e o v e r a l l d i p o l e l e n g t h i s s t i l l a c c o r d i n g t o t h e S t a n d a r d . N o e x c e s s i v e f o r c e m u s t b e a p p l i e d t o t h e d i p o l e a r m s , b e c a u s e t h e y m i g h t b e n d o r t h e s o l d e r e d c o n n e c t i o n s n e a r t h e f e e d p o i n t m a y b e d a m a g e d Additional EUT Dat a M a n u f a c t u r e d b y I S P E A G C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 4 o f 8 I n C o l l a b o r a t i o n w i t h CALIBRATION LABORATO Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn D A S Y 5 V a l i d a t i o n R e p o r t f o r H e a d T S L D a t e : 0 6 2 2 . 2 0 1 8 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5d221 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; 6 = 1.359 S/m; Cr = 39.3; p = 1000 kg/m3 Phantom section: Center Section DASY5 Configuration Probe: EX3DV4 - SN7464; ConvF(8.39, 8.39, 8.39) @ 1900 MHz; Calibrated:
9/12/2017 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1525; Calibrated: 10/2/2017 Phantom: MFP_V5.1 C ; Type: QD 000 P51 CA; Serial: 1062 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.1 1
(7439) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm Reference Value = 99.35 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 18.4 W/kg SAR(1 g) = 9.74 W/kg; SAR(10 g) = 5.1 W/kg Maximum value of SAR (measured) = 15.1 W/kg dB
-3.57
-7.1d
-10.71
-14.28
-17.85 0 dB = 15.1 W/kg = 11.79 dBW/kg C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 5 o f 8 I n C o l l a b o r a t i o n w i t h 1 E ?
C A U B R A T I O N L A B O R A T O R Y Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttlCachinattl.com http://www.chinattl.cn I m p e d a n c e M e a s u r e m e n t P l o t f o r H e a d T S L Trl 511 Log Mag 10. 00dB/ Ref 0. 000ds [F1]
P i 1 L
-50.00 ' 1 R 5 1 1 s m i t h ( R + j X ) S c a l e 1 . 0 0 0 U [ F 1 D e l ]
> 1 1 . 9 0 0 0 0 0 0 G M Z 5 3 . 4 0 1 Q 6 . 6 1 5 0 0 r r i s t a t 1 . 7 t ; F 8 w 1 j 2 C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 6 o f 8 I n C o l l a b o r a t i o n w i t h 1 r A I I n n w w r k , I -
s L 7 Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel 86-10-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn D A S Y 5 V a l i d a t i o n R e p o r t f o r B o d y T S L D a t e : 0 6 . 2 2 . 2 0 1 8 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5d221 Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; 6 = 1.551 S/m; Cr = 53.23; p = 1000 kg/m3 Phantom section: Right Section DASY5 Configuration:
Probe: EX3DV4 - SN7464; ConvF(8.32, 8.32, 8.32) @ 1900 MHz; Calibrated:
9/12/2017 Sensor-Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn1525; Calibrated: 10/2/2017 Phantom: MFP-V5.1 C ; Type: QD 000 P5I CA; Serial: 1062 Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.1 1
(7439) ) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm Reference Value = 85.01 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 18.7 W/kg SAR(1 g) = 10.1 W/kg; SAR(10 g) = 5.21 W/kg Maximum value of SAR (measured) = 15.7 W/kg dB 0
-3.56
-7.13
-10.69
-14.26
-17.82 0 dB = 15.7 W/kg = 11.96 dBW/kg C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 7 o f 8 In Collaboration with CALIBRATION LABORATORY Add: No.5 1 Xueyuan Road, Haidian District, Beij ing, 100191, China Tel 86-10-62304633-2079 Fax 86-10-62304633-2504 E-mail: cttl@chinattl.com http://www.chinattl.cn I m p e d a n c e M e a s u r e m e n t P l o t f o r B o d y T S L T r l 5 1 1 L o g M a g 1 0 . 0 0 d R e f 0 . 0 0 0 d F 1 ]
5 0 . 0 0
> 1 1 . 9 0 0 0 0 0 0 G H Z 6 1 0
. 0 0 2 0
. 0 0
- 5 0 . 0 0 W 511 smith (R+jx) scale 1.000u [Fl Del]
> 1 1 . 9 0 0 0 0 0 0 G H Z 4 7 . 3 7 8 0 6 . 6 4 7 5 z W l O q 2 4 C e r t i f i c a t e N o : Z 1 8 - 6 0 1 9 7 P a g e 8 o f 8
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-05-30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral | |||
3 | 826.4 ~ 846.6 | PCE - PCS Licensed Transmitter held to ear | ||
4 | 2412 ~ 2472 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2019-05-30
|
||||
1 2 3 4 | Applicant's complete, legal business name |
BLU Products, Inc.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0019890946
|
||||
1 2 3 4 | Physical Address |
10814 NW 33rd St # 100 Doral, FL 33172
|
||||
1 2 3 4 |
Doral, Florida 33172
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
b******@phoenix-testlab.de
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
1 2 3 4 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
YHL
|
||||
1 2 3 4 | Equipment Product Code |
BLUG5PLUS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
W******** Z****
|
||||
1 2 3 4 | Title |
Senior Manager
|
||||
1 2 3 4 | Telephone Number |
30571********
|
||||
1 2 3 4 | Fax Number |
30543********
|
||||
1 2 3 4 |
z******@ctasiasz.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/22/2019 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Phone (LTE/WCDMA/GSM/BT/WIFI) | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Output power is maximum Peak conducted. This device has integrated PCE and DTS licensed transmitter certified under the same FCC ID. | ||||
1 2 3 4 | Output power is maximum EIRP/ERP. This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DSS and DTS transmitter certified under the same FCC ID.SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.25 W/kg, 0.74 W/kg, 0.76 W/kg and 0.76 W/kg, respectively. | |||||
1 2 3 4 | Output power is maximum peak conducted. This device supports 20MHz channel bandwidth. This device has integrated DSS and PCE transmitter certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.21 W/kg, 0.10 W/kg, 0.76 W/kg and 0.76 W/kg, respectively. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Shenzhen Morlab Communications Technology Co. Ltd.
|
||||
1 2 3 4 | Name |
M******** F******
|
||||
1 2 3 4 | Telephone Number |
+86 7********
|
||||
1 2 3 4 |
Z******@morlab.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0080000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 27 | 1712.4 | 1752.6 | 0.251 | 0.091 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
3 | 2 | 27 | 1720 | 1745 | 0.287 | 0.047 ppm | 18M1G7D | ||||||||||||||||||||||||||||||||||
3 | 3 | 27 | 1720 | 1745 | 0.227 | 0.047 ppm | 18M1D7W | ||||||||||||||||||||||||||||||||||
3 | 4 | 27 | 1720 | 1745 | 0.287 | 0.047 ppm | 18M1W7D | ||||||||||||||||||||||||||||||||||
3 | 5 | 27 | 701.5 | 713.5 | 0.11 | 0.091 ppm | 4M52D7W | ||||||||||||||||||||||||||||||||||
3 | 6 | 27 | 704 | 711 | 0.116 | 0.091 ppm | 9M05G7D | ||||||||||||||||||||||||||||||||||
3 | 7 | 27 | 704 | 711 | 0.104 | 0.091 ppm | 8M99D7W | ||||||||||||||||||||||||||||||||||
3 | 8 | 27 | 704 | 711 | 0.116 | 0.091 ppm | 8M98W7D | ||||||||||||||||||||||||||||||||||
3 | 9 | 27 | 706.5 | 713.5 | 0.118 | 0.097 ppm | 4M53G7D | ||||||||||||||||||||||||||||||||||
3 | 1 | 27 | 706.5 | 713.5 | 0.118 | 0.097 ppm | 4M53W7D | ||||||||||||||||||||||||||||||||||
3 | 11 | 27 | 709 | 711 | 0.115 | 0.097 ppm | 9M02G7D | ||||||||||||||||||||||||||||||||||
3 | 12 | 27 | 709 | 711 | 0.106 | 0.097 ppm | 8M99D7W | ||||||||||||||||||||||||||||||||||
3 | 13 | 27 | 709 | 711 | 0.115 | 0.097 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
3 | 14 | 22H | 824.2 | 848.8 | 0.946 | 0.092 ppm | 246KGXW | ||||||||||||||||||||||||||||||||||
3 | 15 | 22H | 824.2 | 848.8 | 0.191 | 0.088 ppm | 250KG7W | ||||||||||||||||||||||||||||||||||
3 | 16 | 22H | 826.4 | 846.6 | 0.271 | 0.077 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
3 | 17 | 22H | 829 | 844 | 0.114 | 0.091 ppm | 9M02G7D | ||||||||||||||||||||||||||||||||||
3 | 18 | 22H | 829 | 844 | 0.1 | 0.091 ppm | 8M99D7W | ||||||||||||||||||||||||||||||||||
3 | 19 | 22H | 829 | 844 | 0.114 | 0.091 ppm | 8M98W7D | ||||||||||||||||||||||||||||||||||
3 | 2 | 24E | 1850.2 | 1909.8 | 1.271 | 0.038 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
3 | 21 | 24E | 1850.2 | 1909.8 | 0.432 | 0.043 ppm | 246KG7W | ||||||||||||||||||||||||||||||||||
3 | 22 | 24E | 1852.4 | 1907.6 | 0.102 | 0.043 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
3 | 23 | 24E | 1860 | 1900 | 0.318 | 0.037 ppm | 18M1G7D | ||||||||||||||||||||||||||||||||||
3 | 24 | 24E | 1860 | 1900 | 0.267 | 0.037 ppm | 18M1D7W | ||||||||||||||||||||||||||||||||||
3 | 25 | 24E | 1860 | 1900 | 0.302 | 0.037 ppm | 18M1W7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC | 2412 | 2472 | 0.153 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC