FCC ID: 2BCGGXM1 Dry Fire System

BlueOps Basic Pack for GLOCK General Product Description:

The EUT is an indoor electronic consumer device used for dry fire training at home or at a shooting range. It contains a BLE transceiver for communicating with a smartphone application. Unit is shaped in the form of a gun magazine and is entered into the gun for the training purpose. When the user pulls the trigger, the unit operates an external laser pointer. Unit is powered by a rechargeable 800mAh LiPO battery and it cannot operate while being charged. External battery charger is not part of EUT Intro:

Thank you for purchasing the Basic Pack for GLOCK by BlueOps. We are confident that you will enjoy using this cutting-edge technology for your training needs. Please read this user manual carefully to ensure safe and proper usage of the product. Please ensure that you familiarize yourself with the Safety Guidelines and Usage Instructions provided in this manual before using the xMAG and xLSR units. What's in the Box:

2 xMAG Smart Magazine units 1 xLSR Laser Cartridge USB-C charging cable 3 LR626 batteries Laser Extraction Tool 2 interchangeable base pads Safety Guidelines BlueOps Basic Pack for GLOCK was built with total safety in mind. Nevertheless, please make sure that you clear your weapon before starting any dry-fire practice session. Never assume that your firearm is clear - always double check!

Keep xMAG and xLSR units away from liquids, including water and oils. Exposure to liquids may damage the electronic components and compromise the functionality of the product. Never attempt to charge xMAG if it is not completely dry. Moisture can cause electrical short circuits and damage the device. Use only the included charging cable for charging xMAG. The use of unauthorized charging cables can lead to malfunction or damage to the product. Use only batteries approved by the manufacturer. Operating Temperature: 0 C to 40 C (32 F to 104 F) FCC ID: 2BCGGXM1 This device complies with FCC Rules Part 15: Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Getting Started:

1. Important Note: xMAG is a cutting-edge piece of technology that includes electronic components. At any time during the usage of xMAG, make sure to avoid touching the Indicator white LED at the upper front end of xMAG (refer to Figure 1 in the user manual). 2. The xMAG unit is partly charged out of the box. However, it is recommended to fully charge it before the initial use. 3. Charging a. Connect one end of the included USB-C charging cable to the charging port located on the back of the xMAG unit. b. Connect the other end of the USB-C charging cable to a power source, such as a USB port on your computer or a compatible USB wall adapter. c. While charging, the Indicator white LED will blink rapidly indicating that xMAG is charging. Once fully charged, the LED will turn off. d. Disconnect the charging cable from xMAG and the power source once it is fully charged. 4. Unscrew the rear end of the xLSR Laser Cartridge (refer to Figure 2 in the user manual). 5. Insert the 3 included LR626 batteries into the cartridge, ensuring the minus (-) side of each battery is facing up. 6. Turn ON both xMAG Smart Magazines by pressing once on the black switch located on the right side of each device. The LED Indicator on each xMAG should start blinking. 7. Make sure that you have the BlueOps xCORE application installed on your mobile device. The latest version can be found on the Apple Store and Google Play Store. 8. Launch the BlueOps xCORE app on your mobile device. A setup/connect dialog will appear. a. Follow the instructions provided in the app to pair both xMAGs with the app. The instructions will guide you through the pairing process. b. Note that once the pairing is completed, the LED Indicator on each xMAG will stop blinking, indicating a successful connection. c. After completing the pairing process, the app will suggest going through a 'bootcamp'

training.Follow the app's instructions as it guides you through the main features of the xMAG and xLSR. Usage Instructions:

Note: You will have to pair your devices with the BlueOps xCORE app only once. If you have already completed the pairing process as part of the getting started section, you will not need to do it again. 1. The two interchangeable base pads can be used to customize the fit of the xMAG unit on your firearm. Choose the appropriate base pad and follow the instructions to install it securely. 2. Ensure that you have properly installed the xLSR Laser Cartridge in your firearm's chamber. If needed, you can adjust the xLSR rotation position using the included Extraction Tool (refer to Figure 4 in the user manual). 3. Launch the BlueOps xCORE app on your mobile device and choose a drill or scenario from the presented list (refer to Figure 3 in the user manual). 4. Follow the instructions provided in the app as it guides you through the selected drill or scenario. 5. With the guidance of the xCORE app, you are now ready to engage in your training session or practice. Maintenance and Care:

Keep the xMAG and xLSR units clean and free from dust and debris. Use a soft, dry cloth to wipe them down as needed. Avoid exposing the xMAG and xLSR units to extreme temperatures or direct sunlight for extended periods. If the xMAG or xLSR units require cleaning beyond wiping with a cloth, refer to the maintenance instructions provided by BlueOps for specific guidelines. For further assistance or inquiries, please contact us at support@blueops-tech.com

ISRAEL TESTING LABORATORIES 1aCNRA Global Certifications You Can Trust INS ACCREDITED ahi Certificate: 1152.01 DRY-FIRE. REINVENTED N THE BOX US. PATENT US10788285B2 FCCID: 2BCGGXM1

(x DESIGNED IN

) ISRAEL MADE IN CHINA

& x FE C blueops-tech.com

ISRAEL TESTING LABORATORIES 1aCNRA Global Certifications You Can Trust INS ACCREDITED ahi Certificate: 1152.01 FCC ID: 2BCGGXM1 3./v, 1A FCC ID: 2accaxm 3.7, 10

Date: 09/11/2023 To Whom It May Concern, We hereby authorize Mr. Netanel Yakobov of I.T.L. Product Testing Ltd., to act on our behalf regarding the following FCC/ISED certification application:

FCC ID: 2BCGGXM1 IC:

Thank you, Itay Cohen CTO

FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:09112023 Ref: AttestationStatementsPart2.911(d)(7)Filing FCCID:2BCGGXM1 FRN:0034107466 BlueOpsLTD.(theapplicant)certifiesthat,asofthedateofthefilingoftheapplication,FCCUSAgent LLCisourdesignatedU.S.agentforserviceofprocessfortheabovereferencedFCC ID.BlueOpsLTD. acceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketing andimportationortheconclusionofanyCommissionrelatedproceeding involvingtheequipment. FCCUSAgent,LLCaccepts,asofthedateofthefilingoftheapplication,theobligation ofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation:

CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,Saint Charles,IL,60174,USA ContactPerson:TimPayne Phone:7085713148 Email:Support@FCCUSAgent.com Sincerely, BlueOpsLTD. ItayCohen CTO FCCUSAgent,LLC TimPayne Manager Rev 1/26/2023

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-11-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BCGGXM1 Blue Ops LTD. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Itay Cohen CTO Rev 10/18/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-11-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BCGGXM1 Blue Ops LTD. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List t (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Itay Cohen CTO Rev 10/18/2023

Date: 09/11/2023 To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046, USA Subject: Request for Confidentiality Ref: FCC ID numbers Model xMAG FCC ID 2BCGGXM1 To whom it may concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, Blue Ops Ltd. hereby requests confidential treatment for equipment authorization referenced above. Permanent Confidentiality Blue Ops Ltd. requests that the Commission withholds the following documents from public viewing indefinitely:

Parts list Block diagram Schematics Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Short Term Confidentiality In addition to the above-mentioned documents, pursuant to Public Notice DA 04-

1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Blue Ops Ltd. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued:

External Photographs Internal Photographs Test Setup Photographs User Manual Sincerely, Itay Cohen CTO

Date: Sep-11, 2023 To: Federal Communications Commission, 7435 Oakland Mills Road, Columbia, MD 21046, USA Attn:

Reviewing Engineer Label Letter, FCC ID: 2BCGGXM1 To Whom It May Concern:

Blue Ops LTD. hereby declares, that the product and the label are too small to include the statement specified in 47 CFR Part 15 Sub-part A, Section 15.19 (a) (3). Under the provisions of 47 CFR Part 15 Sub-part A, Section 15.19 (a) (5), this statement appears in a prominent location in the user manual. Thank you, Itay Cohen CTO

Date: 10/11/2023 To:

Timco Engineering, Inc., an IIA Company 13146 NW 86th Drive Suite 400 Alachua, FL 32615, USA We hereby authorize Mr. Netanel Yakobo of I.T.L. Product Testing Ltd., to sign Form 731 on our behalf, for the following FCC certification application/s:

FCC ID: 2BCGGXM1 Thank you, Itay Cohen CTO