FCC ID: 2A4B7-1021 Contactless Sleep Tracker and Wake Light

ser Manual Model No.: V4E6N2 Included In-Box:

Device (model no. V4E6N2) AC/DC Power Adapter Description:

The device is a sleep tracker based on 60GHz radar technology that is operational while placed on the bedside of the user (nightstand) and power supplied via AC/DC power adapter. In addition, the device is equipped with 2.4 and 5GHz WiFi and Bluetooth for set-up and internet connection and with a wake lamp. Installation and Operation:

Place the device on a flat, free and stable surface on your bedside (nightstand) with a minimum distance of 20cm towards your body. Plug in the DC connector of the AC/DC power adapter. Plug-in the AC/DC adapter into a nearby AC outlet. For set-up please follow instructions on the Quick Start Guide. Please adhere to safety guidance below and on the product website. Safety and Compliance Information Using Your Device Around Other Electronic Devices The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off. FCC Compliance Information Electromagnetic Interference Compliance Statement and Notes This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules. Device FCC Radio Certification Information Information on your device is on file with the FCC Equipment Authorization System and can be found by inputting your devices FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid. Information Regarding Exposure to Radio Frequency (RF) Energy The device operates with low radio frequency transmission power which safely meets the FCC RF exposure limits. This device should be installed as intended and instructed to meet the recommended minimum distance of 20 cm towards the user. Product Specifications Electrical ratings: AC/DC power adapter. AC: 100-240VAC, 50/60Hz; DC: 13.5VDC Max 1.14A Connectivity: Dual Band Wi-Fi (2.4/5 GHz); 802.11 a/b/g/n; BT, BLE Operating temperature: 0C to 35C Operating Frequency and Maximum Radio Frequency Power (EIRP):

BT (2402-2480 MHz: 6.5 dBm) BLE (2402-2480 MHz: 7 dBm) Wi-Fi 2.4 GHz (2412-2472 MHz: 19 dBm) Wi-Fi 5G (5180-5240 MHz: 15 dBm) Wi-Fi 5G (5620-5320 MHz: 16 dBm) Wi-Fi 5G (5500-5700 MHz: 16 dBm) Wi-Fi 5G (5745-5825 MHz: 16 dBm) Non-ISM band 62-63.1 GHz: 3 dBm ISM band 61-61.5 GHz: 20dBm

Quick Start Guide FCC-ID: 2A4B7-1021 Product Model Number: V4E6N2 Date: 08/15/2022 Blueberry Cornel LLC Quick Start Guide Included In-Box:

- Device

Power Adapter Activate Device:

Step 1: Download the app from you App store. Step 2: Power on the device by connecting the power adapter to the device and plugging it into a power outlet. Device will enter pairing mode (pair will appear in the clock display) Step 3: Open up the app and follow the instructions in the app to set up your profile and register your account. Step 4: Next, the app will attempt to pair the device with the app. If successful, conn (for connect) will appear in the clock display to await network and password information from the app. Step 5: Follow the instructions in the app to select your network from the list of displayed SSIDs and enter your password. The device will then attempt to connect to the network. If successful, done will appear in the clock display for 1-2 seconds along with a confirmation screen in the app. Step 6: Follow the remaining instructions in the app to complete setup.

To the Certification Body, Date: July 28, 2022 Blueberry Cornel LLC hereby authorizes Sporton International Inc., located at No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan, R.O.C., to provide and prepare all documentation relating to our product certification, including the signing of application forms for Model Name V4E6N2 (Product), FCC ID: 2A4B7-1021, directly to the Certification Body on our behalf. Sporton International Inc. is also authorized under this letter to respond on our behalf directly to the Certification Bodys questions about the Product and Reports as necessary to assist the Certification Body in the FCC certification. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the Blueberry Cornel LLC. Sincerely, Blueberry Cornel LLC _____________________ Brian Harrison 2150 S. Central Expressway Suite 200 McKinney, TX 75070 Telephone: (302) 576-2876 Email: Blueberrycornelllc@gmail.com

Blueberry Cornel LLC 2150 S. Central Expressway Suite 200 McKinney, TX 75070 Tel: (302) 576-2876 Date: July 26, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2A4B7-1021 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune up procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, ______________________________ Brian Harrison Blueberrycornelllc@gmail.com