This user manual is copyright protected.
This user manual has been created by the Bluebird Soft. We have done our best not to create typos, editing errors, and leaving out any information. Please understand if there are any inconveniences.
This products program is legally protected. Illegal copying, transmitting, or erasing of the program is prohibited.
This products partial functions might have problems from the environment, user program, and other machines.
This wireless equipment cannot service related to safety of human lives due to possible signal interference. REGISTERED TRADEMARK PIDION as the future mobiles leading global brand, expresses with reliability, representativeness, and image of advanced technology. It is a registered trademark from the global brand of Bluebird Soft. and is copyright protected. NOTICE TO USERS MODEL TYPE Class B Device
(Household Information and Communication Device) NOTICE TO USERS This device has qualified the electromagnetic wave suitable registration and can be used as a household device at a residential area as well as any other areas. Form Registration This wireless equipment cannot service related to safety of human lives due to possible signal interference.
PLEASE READ THE WARNING SIGNS BEFORE USING THIS PRODUCT. FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult your dealer or an experienced radio/TV technician. Any changes or modifications to the printer that are not expressly approved by HP could void the users authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. FCC (Federal Communications Commission) This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and 2. This device must accept ant interference received, including interference that may cause undesirable operation. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The antenna must be installed such that 0 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. End users cannot modify this transmitter device. Any Unauthorized modification could void the user`s authority to operate this device. CE Hereby, Bluebird Soft Inc. declares that this BIP-1530 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC.
Getting to know your devices each part 7
Getting to know the buttons 9
Insert/Remove the battery
Insert/Remove the USIM card
Insert/Remove the MicroSD card
Changing the Printing Paper
Charging with Cradle
Turning On
Soft Reset
Hard Reset
Using the Stylus Pen
Adjusting the Display 2 BIP-1530 Manual
Installing on PC
Using ActiveSync
Connecting ActiveSync
Using the Barcodes
Scanning with Barcodes
Checking Barcodes
Looking at the Home screen
Setting up Photos as Home screen Background
Adjusting Volume
Checking Battery Level
Selecting text input mode
Block recognizer
Keyboard
Letter recognizer
Transcriber
Making a Call
Receiving a Call
Blocking a Call
Hanging Up
Searching
Adding a Contact
Menu
Taking Photos
Viewing Photos
BIP-1530
PINPAD
Finger scan
Payment
Snap on
Connecting the Hand Strap
Connecting the Shoulder Strap
Connecting IC Card Cover
3
This information is for your own safety. Please observe the following precautions
This device is qualified of electromagnetic wave human safety standards. For your own safety please use the authenticated devices only from the head company. If not the case, we cannot guarantee your safety.
Do not press the power button or the power adepter/
cord when the device is wet. There is a danger of electrical shock.
Do not remodel, take apart, or repair the device. Please refer to your customer service center. If not the case, you will not be able to get your free repair service.
Please follow instructions when using the batter.
Do not use your device at an explosive danger zone.
In case your device is wet, do not put your device in heaters, microwaves, or etc to dry- there is a risk of explosion or it can be the cause of malfunction. (Please note there is a label in the device that changes color when it gets wet. In this case your will not be able to get your free repair service.)
Do not use your device on-board an airplane or in hospitals.
Please backup your devices inner data and information. During the repair or upgrade, there is a slight possibility of your data being erased. (Ring tones, text/voice message, characters will be reset.) 4 BIP-1530 Manual
Please refrain from using your device while driving. If you are in an unavoidable situation, stop your vehicle or use your hand free kit.
Do not use in places of high temperature and high humidity. The following can be the causes of malfunction: getting wet from the rain, spilling drinks, and taking it in with you at the sauna (high temp.) In these cases, you cannot receive your free repair service.
Do not place credit cards, phone cards, bankbook, and tickets next to the device. The devices magnetism can damage the listed items information.
Please avoid impacts or vibrations. When not using the device unplug the power cord and place it at a safe place where it will not drop. BIP-1530
Do not place your device at a dusty place. Keep your power cord away from any heating devices. Unplug the power cord when cleaning. If there are any dusts or residue clean the power cords pins thoroughly.
When not using a battery for long periods, please charge it and leave in at room temperature. Even a charged batterys voltage will decrease over time.
Do not paint your device. It can damage your screen or your devices exterior. Also, the paint can peel off and trigger allergies. If there is a allergic reaction please seek medical advice. 5
These are safety precautions in order to prevent a dangerous accident. Please use the battery correctly and carefully observe the instructions.
If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is a risk of a dangerous explosion. Please keep away from children and animals.
Leaving the battery in a hot car or enclosed space where there is direct sunlight, can deform or break down the battery.
Please take precaution in not letting necklaces, coins and etc touch the batterys terminal (metal part). Do not give an impact on the battery by a sharp object or an animal. There is a risk of explosion.
Please use only the designated battery for the device. If the original battery is not used, the devices life may decrease and there is a risk of explosion.
(In this case you cannot receive the free repair service)
When charging the battery you must use the supplied standard power adapter. If the original adapter is not used the battery life may decrease and may explode.
(In this case you cannot receive the free repair service)
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 6 BIP-1530 Manual
BIP-1530
Speaker On button Reset button On State LED Communicating State LED Screen Barcode Scan Button Battery Cover Button Shoulder Strap Holder 7
Hand Strap Holder Flash Camera Printer Cover Stylus Pen Holder Barcode Scanner Window 8 BIP-1530 Manual Battery Cover Printer Cover Button Battery Cover Button Barcode Scan Button
BIP-1530 Buttons Power Button Reset Button Details Turns on the device Soft reset All the programs running will close and the device will restart. Hard reset The device will reset into factory mode. 9
10 BIP-1530 Manual Buttons FnButton Details This buttons function is used as a combination. It is used when the blue printed button is used. Enter Button You can change the row you are typing in. It functions the same as the computer enter button. Mode Change Button This is a button that changes the mode of Local language/Alpha. Capital/
Alpha. Lower Case. When pressed at the number mode, the Alphabet lower case and symbols will be activated. The default state is the number mode. When pressed, Alphabet and symbol mode will be activated. Buttons Details Buttons Details BIP-1530 BKSP Button Direction Button It moves one space at a time and erases the written information. It is the same is the computers back space button. If pressed down for more than 3 seconds it will quickly erase consecutively. It is used when moving Up/Down/
Left/Right. Numbers / Alphabet Capitalized / Symbols Default state is Number mode and you can input Alphabet or Symbols. F1 ~ F9 Button It is used with Fn as a combination. You can customize these buttons. 11
1-1. Insert the battery 1Push your battery in the direction of the arrow. 2Put on the battery cover in the direction on the arrows.
Only use the supplied adapter to charge your battery.
The batter cover supports high-capacity batteries. Option accessory module only supports the standard batter. [Code : 13774]
12 BIP-1530 Manual 1-2. Removing the battery BIP-1530 1Press both of the battery cover buttons on the side and slide the battery cover out. 2Lift the battery in the direction of the arrow. 13
2-1. Insert the USIM card 2-2. Removing the USIM card Slide in the USIM card in the arrow direction. The devices supports 2 USIM slots. Push the top of the USIM card to slide it out in the arrow direction. 14 BIP-1530 Manual
3-1 Insert the MicroSD Card 3-2 Removing the MicroSD card In the arrow direction, slide in the MicroSD card with the metal terminal facing up. Press push do slide the MicroSD card out. BIP-1530 15
While pressing the button on back and top of the device, open the printer cover with the arrow direction. Please be careful not to insert printing paper in the opposite direction. 16 BIP-1530 Manual
If waterproof is necessary, please lift the cover up. At other times, please leave the cover down.
BIP-1530 As you see in the picture, connect the adapter with the power cable to charge the PDA. Power Charging Light Charging Charged Orange Green
When the devices battery is low, it may warn you with a ring and a message.
The charging time can vary depending on the environment. A new battery is only partially charged. Please charge fully before using. 17
Power Button Reset Button
The [Power] button in on the front.
To turn your device on you must press the shortly.
You must hold down the button more than 3 seconds to turn on/off the LCD back light.
After purchasing your device or hard reseting, the booting process can take some time. We apologize for the inconvenience. 18 BIP-1530 Manual To reset, press the [Reset] button, in front of the device, lightly with the stylus pen.
Please soft reset if your device freezes or has an unexpected error.
It is very similar to rebooting your computer. Any information not saved will not be lost.
Reset Button OK Button Hold [OK] button + [Reset] button for 5 seconds. BIP-1530
Please use this function when your device does not react to the soft reset. It will go back to the factory state.
When doing the hard reset, everything will be erased. Please do it at your own risk.
We are not responsible for any information being erased. Before you hard reset, please back up your data. 19
The supplied stylus pen is used to run programs or inputting on the touch screen. Pressing Pressing means to open, run, and cancel any items. Pulling Using the stylus pen you can select multiple items as much as needed. (it is similar to the mouse drag on the PC) Holding Down If you want to see further details of the selected item, hold down on the item and a popup will appear. ( it is similar to the mouse right click on the PC) 20 BIP-1530 Manual
On your LCD screen, it is the function of setting the input value of the stylus pen. Adjusting screen Setting StartSettingsSystem displayScreen adjustment Press the center target accurately followed by left topleft bottomright bottomright top.
[Microsoft ActiveSync 4.5] Korean version.
The functions and the layout and be different for other manuals.
[Microsoft ActiveSync] can be updated through the Microsoft Homepage.
[Windows Vista] users need to install [Windows Mobile Device Center]. BIP-1530 1After connecting to the Microsoft homepage, download and install [Microsoft ActiveSync]. 21
2On the window [Please read the license terms]
press <I accept the license terms> [Client information] window - input <User name> Please specify where you want to install. 3When ready to install [Microsoft ActiveSync] will install. 22 BIP-1530 Manual 4[Microsoft ActiveSync] is installed. BIP-1530 1You can connect with the Cradle.
The display you see is a [Windows Mobile] version and it can vary depending on the version.
[Microsoft ActiveSync] can be used when the device is plugged into a notebook or pc. You can transfer files by syncing it. You can also install/uninstall new programs.
The USB cable is sold separately. Please contact the service center for more details. [Code : 12132]
23
You can connect by an option accessory Snap-on. 2 If the device and the computer successfully connects, [Microsoft Activesync] will automatically start. Please Select the <Search> button. 24 BIP-1530 Manual 3 In the <Mobile device> folder, you can check the photos, music, and documents stored in the device and move it to the computer. BIP-1530
[Precautions using ActiveSync]
When "unknown USB device" can pop up, when the device is turning on while connected to the
<Micro USB Cable>. If you reconnect the device from the <Micro USB Cable> the ActiveSync will run properly.
If in ActiveSync, the state "connecting" is continued for a long period of time, disconnect the device from the <Micro USB Cable>. In [ActiveSync]
press FILE CONNECTION SETTINGS Select
<Allow USB connection> Press [OK]. Reconnect the device. 25
If you have reconnected several times and still unknown USB device pops up In certain cases the computers USB host has gone wrong leading to connection failure. Remove the device from the <Micro USB Cable>
and reboot the computer. Reconnect the device to the cable and it will run properly.
The device not running after removing the battery while device on. For this to be avoided, do not remove the battery while the device on. You must press the [Power]
button or the [Shut Down] button with the stylus pen in order for the Windows Mobile to [turn off]
correctly. If in a case where you have removed the battery while the device is on, hold the [Reset] button +
[OK] button to hard reset.
Please note if you hard reset, all the data in the memory will be erased. 26 BIP-1530 Manual BIP-1530 If you use the function [USB-PC Connect] your devices battery consumption will be high. If you are not using the function [USB-PC Connect]
disconnect to save your battery consumption.
Start Setting Connect USB-PC connect If you select [Advanced Network Function Use] you can connect various Surrounding USB devices to your PDA device. Your device and the surrounding devices can you used when connected with the <USB Cable>. 27
Press the [Barcode Scan] button on the side or front of the device to start scanning barcodes.
In order to scan accurately, you must scan with the correct angle 10cm away. Correct scanning Angle If you are using Barcodes with special programs, please contact the manufacturing company. 28 BIP-1530 Manual
StartMemo The barcodes information will appear if you press the [Create New] button in <Memo>. If you scan a barcode while
<Memo> is open, the barcode will be automatically saved in
<Memo>. If you scan when <Memo> is not opened, it will not be saved. To do this, press the [Menu] button in [Create New] and [Paste] to save. BIP-1530 29
On top of the screen, [Start],
[Wi-Fi], [Connection Status],
[Volume], [Battery], and etc will been displayed. You can see the [Weather],
[Time], [Wireless Connection Status], [Owner Information],
[Messages], [Operation],
[Schedule], [Device Lock Status], and etc on the [Home screen]
with your user settings. You can set the photos you can taken as a background image. 1 Start Photos & Video select My Photos. 2Press the bottom right [Menu]
button on the screen. 3Select [Set as Home Screen Wallpaper]. 4 After setting the transparency level select [OK]. 30 BIP-1530 Manual
BIP-1530 You can check your battery level by pressing the right of your display. on the top You can adjust your volume for program folders, selecting menus, or In-call volume. After selecting the on the top right, you can adjust your system/
ring tone volume. Selecting Vibrate will make your phone muted and into the Vibrate Mode. 31
There are five different character input methods available.
This input method uses the traditional writing area box split in the middle. The left side is used to write letters and the right side is for number entry. Symbols and common functions are located in other smaller boxes located in the right of the writing box area. 32 BIP-1530 Manual
This input method displays an on-screen keyboard that can be used to input characters by tapping the screen using the stylus pen. BIP-1530
This option allows you to enter text using your own handwriting. The screen is divided into three different areas. A capital letter area, small letter area, and a number area. Characters are entered by printing letters in each area. The character is then analyzed and typed on the screen automatically. 33
The transcriber option is similar to the letter recognizer, except instead of entering characters into a designated area, you can enter entire words and sentences using your own handwriting. Transcriber supports both printing and cursive writing styles and then automatically types the information on the screen. 34 BIP-1530 Manual
BIP-1530 To make a call, press the [Phone]
button in the bottom of the screen. Input a phone number and press [Call]. Redial Without inputting the a phone number again, press the [Call] button to redial.
: Deletes mistake numbers.
: You can use the saved speed dials to make a call. To add/edit/delete a speed dial, press the menu on the bottom right.
(You can save a maximum of 98 speed dials.)
: You can the recent view received calls/out going calls/missed calls.
: After inputting a phone number press this button to make the call. 35
When you are receiving a call, press the [Call] button or the
[Answer] button on the bottom of the screen. To block a call, press the [Ignore]
button on the bottom of the screen or the [End] button on the keyboard. You can also block the call by shorting pressing the volume button.
The outgoing information message can be different from the regular devices. 36 BIP-1530 Manual
To hang up, press the [End]
button or the [End] button on the devices keyboard.
The BIP-1500 Does not support conference calls, call transferring optional call services.
The BIP-1500 Does not support Voice Call
The BIP-1500 supports only the regular during Dial-up. optional call service <Call waiting>. (The SMS service from call waiting is not supported.) BIP-1530 37
1Start Select Contacts. 1Select the [Create New] button on the top left.
2 Type in a name on the [Name Input] to search a contact. 2Select the contacts category. 38 BIP-1530 Manual You can use various menus when you hold down the contact. Call Work/Home/Cell phone :
Each numbers saved can be called. Send Email : Sends email to the saved email account. Send Message : Sends a text message to the saved phone number. Copy Contact : Copies the selected contact. Delete : Deletes the selected contact. BIP-1530
If the BIP-1500 device has been reset, there will not be a information message when retrieving/deleting a contact list.
The BIP-1500 device may take some time showing the saved contacts when it has been reset or has been erased from the USIM card. 39