-Before starting, ensure that you read and follow the Safety Warnings and Precautions section of this manual. Safety Warnings and Precautions Safety Warnings and Precautions
: Please follow the instructions to properly use the product and avoid accidents in advance. 1. Exercise precautions when using the battery
If the batteries are damaged, severely shocked, heated, exposed to moisture or high temperatures, or bored by a gimlet, it may explode. Keep batteries away from children and pets. 2. Do not use PDA phone in explosion areas. 3. Do not use PDA phone on an aircraft or inside a hospital. 4. Avoid using PDA phone or checking phone numbers while driving. Use hands free kit in unavoidable conditions or use it after stopping the car 5. Product may deform or malfunction if exposed to direct sunlight 6. Prevent conductive objects such as necklaces and coins from making contact with the battery plug. Do not shock battery with sharp objects or animals. Battery may explode. 7. Only use recommended batteries and do not use with other products. Do not use inferior quality battery as doing so may shorten battery and PDA life span and cause explosion. (Warranty is void in this event) 8. Battery must be charged with the adapter or standard charger provided. Usage of unapproved adapter may shorten battery life or cause explosion. (Warranty is void in this event) 9. If the PDA gets wet, never insert or place the terminal, battery, or charger into or near heating devices, such as heaters or microwave ovens . This may cause production deformation, explosion or fire. (The labels color inside the PDA or battery will fade if immersed in water.) Please note that free repair service wont be provided in this condition.) Contents Contents I. Safety and precautions Warning and cautions II. Contents 1. Product composition 2. Get to know the product 1) Left, front, right side of product 2) Button introduction 3) Specifications 3. Getting started 1) Connecting and disconnecting the battery 2) Charging battery 3) Using PDA 4. Start connecting network 1) Scan 2) ear jack (Converter) 3) Reset PDA 4) Host PC connecting 5) IrDA Using IrDA 6) Bluetooth 7) How to Use Wireless Manager 8) Using memory card 5. ActiveSync 1) Installing ActiveSync 2) Precaution for using ActiveSync 6. Using PDA phone functions 7. Using Wireless LAN features 8. Precautions 9. Appendix 1) Q&A 2) Accessories Product Composition Product Composition The following illustrations may differ from actual products. Please contact our customer center to purchase additional or optional products.
[BIP-5000 PDA 1 unit] [BIP-5000 Cradle 1 unit] [Battery (standard)]
[Stylus]
[Power cable] [Adapter] [USB cable]
[User manual]
BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 2 >
Knowing the product Knowing the product 1. Front, left side, back, right side Antenna Power(LED) GSM
(LED) Alpha key Enter key Function key Speaker Barcode scanner window Camera Flash Barcode/
Camera Button ear jack IrDA Power button Call button Microphone Reset Barcode/
Camera Button Hand Strap Battery Case Fixed screw
[Front] [Right side]
[Back]
[Left side]
BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 3 >
Knowing the product Knowing the product 2. Button introduction Use it to turn on/turn off the PDA Laser(1D,2D) Barcode / Camera Type : Press left button to use barcode scanner Press right button to use camera CMOS Barcode Type : Use right and left button to activate barcode. Execute after user input Change character input mode. Default mode is numeric. Press once for lower case English, press twice for capital English, press three times for special characters. Execute program and make phone connection. Press once to execute phone program, press twice to view recent calls, press three times to call the selected number. Delete a character by moving the cursor one space to the left. Move one space to the right. Press 3 seconds to enable/disable silent mode Press 3 seconds to lock the PDA. Password must be inserted to use the PDA. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 4 >
Knowing the product Knowing the product 3. Specifications Contents Description CPU OS Intel PXA270 520MHz Window Mobile 5.0 DISPLAY 3.5, 240 x 320 / 260,000 color INTERFACE 1 x USB 1.1 Client / Host 1 x RS-232C Mini-SD slot IrDA 1.2 (Option: Bluetooth class ) CAMERA 2.0M pixel camera BATTERY 2000mAH SIZE WEIGHT ADAPTER 79.5(width) x 150.3(length) x 34.9thickness) mm 314 g 5V 2.4A BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 5 >
Knowing the product Knowing the product 3. Specification FCC Compliance Statement FCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 6 >
Knowing the product Knowing the product 3. Specification European Union Notice This product satisfies all the technical regulations applicable to the product within the scope of Council Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Radio : ETSI EN 301 511 / ETSI EN 300 328 EMC : ETSI EN 301 489-1/7/17, EN 55022, EN 55024, EN 61000-3-2/-3 Safety : EN 60950-1 Health : EN 50360 / EN 50361 BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 7 >
Knowing the product Knowing the product 3. Specification FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. CAYTION : Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. BIP-5000 Device (FCC ID:
SS4BIP5XX0) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.573 W/kg and when properly worn on the body is 0.956 W/kg. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 8 >
Getting started Getting started 1. Connecting and disconnecting the battery
[Connecting the battery]
[Disconnecting the battery]
Sit the battery to the groove, Put the cover and swivel the screw Swivel the screw in arrow direction until detached, take off battery
* Battery must be taken off after turning off the PDA. Sudden power break may cause the PDA malfunction. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 9 >
Getting started Getting started 2. Charging the battery
[While connecting the adapter to the table charging cradle]
[While connecting the adapter to PDA directly]
*Connect the adapter with table charging cradle as showed
* Connect the converter attached jack with PDA Note: Using the provided/approved adapter is the most safely and effective way to use PDA. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. <10>
Getting started Getting started 2. Battery charging method
[Battery charging and working time]
Working time Standard (2000mhA) Charging Time Standard (2000mhA) Talk time 4 hours Standby time 12 hours (LCD on, backlight off), 200hours (LCD off) Time Less than 4 hours (main battery), less than 72 hours (backup battery)
*Modem power turns off automatically to prevent the battery power damage. Use is after recharging.
*The battery talk time and standby time can be different from the specification in various conditions.
[Battery Charging condition]
Charging Fully charged Charging Lamp Red Green
* It is fully charged when table charging cradle and PDAs charging lamp turn to green, there is no harm if keep charging the PDA.
*The Charging time is subject to change of charging condition, please purchase the new one when its working time is shortened by 50%. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. <11>
Getting started Getting started 3. Getting started
[Turn the PDA]
- Power Button
* Press power button to turn on the PDA
* Depress power button for 2 seconds in the condition of PDA is turned on, the Front light will be turned on or turned off. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. <12>
Getting started Getting started 3. Getting started Using Stylus (using method of stylus, dragging, pressing method)
* Using stylus to select, execute and move the items in the screen.
# Get stylus from PDA
# Tapping Stylus
: Tap the icon in the screen for once by using stylus to select or execute the item, like clicking the mouse left button.
# Dragging Stylus
: Using dragging stylus to select several items, characters and images, like dragging the mouse.
# Tapping and Holding Stylus
: In order to view selected items function, taping and holding the stylus in the screen and it shows the pop manual, like using mouse to select the item and click the right button. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 13 >
Getting started Getting started 3. Start to use PDA
[Calibration]
*Using stylus to select, execute, move the item in screen. Press the stylus to the targeted center target accurately, and doing the same when the target move to up left, down left, down right, up right (This is to settle the input value of stylus in LCD screen. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 14 >
Getting started Getting started 3. Start to use PDA
[Initialization the screen of Win CE]
[Starting Windows Mobile]
*The following figure is shown after the initialization wizard finished. Click on the Start Button on the upper left corner of the title bar and the Start Menu appears. Start Button Start Menu Title Bar Today Screen Program Execution and Option Setting BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 15 >
Get to know the product Get to know the product 3. Start to use PDA
- To use the Function keypad
- The following functions will be executed after pressing the function key and button. Contents Description Function + 1 LCD getting darker Function + 2 Moving one space up Function + 3 LCD getting brighter Function + 4 Moving one space to the left Function + 5 Execute the sign input Function + 6 Moving one space to the right Function + 7 Page Down Function + 8 Moving one space down Function + 9 Page Up Function + 0 Run the sign character Function + 1 Run user defined program Function + 1 Run user defined program Function + 1 Run user defined program BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 16 >
Connecting to the network Connecting to the network 1. Scan
[Using laser Scanner] [Using CMOS Scanner]
[correct]
[incorrect]
[correct]
-Barcode can be read in every direction
* Face the PDA the barcode as shown and press left/right button to use. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 17 >
Connect to the network Connect to the network 1. Scan
[Basic test method of laser barcode]
1) Run notepad 2) Create new notepad file 3) Face the scanner to the barcode and press barcode button. 4) The captured barcode value is shown in the new notepad. Please consult the programs manufacture for using the special barcode program. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 18 >
Connect to the network Connect to the network 1. Scan
[Basic CMOS barcode test method]
1) Run notepad 2) Create the new notepad file 3) Face the scanner to the barcode and press barcode button. 4) The read barcode value is shown in the new notepad. Please consult the programs manufacture for using the special barcode program. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 19 >
Connect to the network Connect to the network 2. Using method of ear jack
[Using ear jack]
Take off the ear jack cover and plug it straight into the PDA as shown. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 20 >
Connect to the network Connect to the network 3. Reset PDA
[Reset]
Reset button Press reset softly by using stylus
* Soft reset can be used to restart the PDA when there is error occurred and PDA stopped working. Same as computer reset, all the unsaved data will be lost. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 21 >
Connect to the network Connect to the network 3. Reset the PDA
[Hard reset]
Perform the hard reset using Stylus and buttons. Hard reset is used when the soft reset doesnt work. The PDA will turn to the original condition after being hard reset. All the installed program in RAM, documents, settings will be lost after doing hard reset. Please backup the data and program before doing hard reset, we will not be responsible for any data and data/program lost. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 22 >
Connect to the network Connect to the network 3. Host PC connection method
[Connect the cradle]
[Connect to PDA directly]
* Connect the PDA (cradle) -cable-computer as shown
* Connect PDA-cable-computer as shown ActiveSync can be used after connecting the PC or notebook to copy the files or install the new program by synchronizing the PDA with PC. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 23 >
Connect to the network Connect to the network 4. IrDA using method
[IrDA using method]
[Executing screen]
Matching the IrDA port as shown (transmission speed is fastest when the distance at shortest) Sample) 1. Start->Setting 2. Select WL transmission after pressing connect tab. 3. Click OK after check receiving all the incoming WL 4. Searching for the opposite IrDA port 5. Press OK after sending the data BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 24 >
Connect to the network Connect to the network 5. Bluetooth using method Activate the Bluetooth device such as Bluetooth printer and card reader. Example of Using the Bluetooth. Path: [Start] -> [Settings]
Click on the [Connections] table and then Select [Bluetooth]. Under the [Mode] tab, check Turn on Bluetooth and click on
[OK]. Turn on Bluetooth
- Depending on checking the option, it is either In Use or Not in Use Status. When it is Not in Use, make sure to deactivate the function in order to prevent battery loss. Make this device discoverable to other devices
- When checked In Use, it should allow other devices to search BIP-1300. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 25 >
Connect to the network Connect to the network 5. Bluetooth using method Other Bluetooth devices are scanned and paired. Example of Using the Bluetooth Path: [Start] -> [Settings]
Click on the [Connections] table and then Select [Bluetooth]
Under the [Devices] tab, select New Partnership... When other Bluetooth devices are recognized, the model name of the product and an icon appears as shown in the Figure. When nothing is recognized, an message to indicate that nothing was found appears. See if PIN Number entry window pops up. (Contact the device manufacturer for the original PIN No. Each device has its own unique device PIN Number for authentication.) Make sure that the scanned device displays the same icon as Bluetooth device. Double-click the device icon > select trust menu > enter PIN No. The red mark of the found device icon will disappear if a correct PIN code is input. Double-click the device icon and select Activate. Make sure the red check mark is shown on the device icon. For activating Bluetooth device, please contact the device manufacturers. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 26 >
Connect to the network Connect to the network 6. How to Use Wireless Manager With the Comprehensive Wireless Manager Function, it assists to use Bluetooth and Wi-Fi (Wireless LAN) in an easy and simple way. Example of Using the Wireless Manager Path: [Start] -> [Setting]
Click on the [Connections] table and then Select [Wireless Manager]
Select either Wi-Fi or Bluetooth button Depending on the communication specification of the terminal, the Support Items for Wireless Manager can vary. By using the All button, all functions can be set ON/OFF at once; and, by using Wi-Fi, Bluetooth, or Phone buttons, a function can be set ON/OFF individually. GPRS/EDGE and WLAN can not operate simultaneously. When Wi-Fi or Bluetooth is set ON, other functions under this will be activated so as to make sub-settings possible. Even when it is set OFF, individual settings are possible by using the Menu button on the bottom. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 27 >
Connect to the network Connect to the network 7. Memory card using method
[Insert Mini SD card]
[Take out Mini SD card]
Memory Card Memory Card
* Push the memory card into the slot as shown until its plugged.
* Press the memory card down deeply as shown and it will bounce out and get detached. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 28 >
ActiveSync connection ActiveSync connection 1. Install ActiveSync Download the installation file for ActiveSync from http://www.microsoft.com/korea, and run the setup.exe When the following window appears, click Next. When the following window appears, click Install. This is for Microsoft ActiveSync 4.1 - Korean. In using other versions, the Menu selections and functions in the manual can be different. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 29 >
ActiveSync connection ActiveSync connection 1. Install ActiveSync After installation is done, click Finish. Depending on your PC environment, the Wizard may ask you to restart your PC. In this case, restart your PC. When you first connect BIP-5000 to PC, the New Hardware Search Wizard of the PC is activated. If you have already installed Microsoft ActiveSync, you do not need to install an additional driver program. During first installation, the terminal may not be able to connect to the PC. In this case, the Communication Error dialog box appears on the terminal. Click OK in this dialog and retry connection. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 30 >
ActiveSync connection ActiveSync connection 1. Install ActiveSync In order to use ActiveSync, connect PDA to PC or Laptop by using the USB cable. Or, after fitting PDA in a cradle, connect the cradle to PC by using the USB cable. Open file finder of your PC, and copy files you want. After all files are copied, move the files to PocketStore. If PDA is turned on when connected to PC, PC will automatically detect it and execute ActiveSync. Press ActiveSync Search button and activate Mobile installation window. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 31 >
Using PDA phone Using PDA phone Using call program 1) Dial number a. Dial a phone number or a speed dial number b. Number can be cleared by using [CLR] button c. Press [SEND] button to make a call
- Redail function: Without inputting numbers, press the [SEND] button to redail the lasted call number d. Communication is available after the call being connected
- Redail option and times can be set in SETTING-OPTION automatically when the connection failed.
- Call time is shown on the screen e. Press [END] button to end the call 2) Receive the call a. An incoming call message is shown when the bell rings. b. Press any key to receive the call. c. Press [END] to finish the call .
* Keep pressing [END] button can turn on/off the phone modem. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 32 >
Using phone program Using phone program Phone program screen
[Send]
1) Push and make a start the phone program. 2) Enter the phone number. 3) Edit the phone number with . 4) Re-send function: Automatically make a phone call which is the last number you input or make you phone call. 5) Connecting. Talking time will show up on the screen.
[Receive]
1) With ringing Calling sign will be shown on the screen. 2) Push and it will be connected. 3) Push the disconnect button will make you disconnected with line. 4) Push the disconnected button longer, then modem will be off. longer, then modem will be off. This mobile handheld device requires ear jack(headset) to make a phone call. Ear jack is an accessory item. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 33 >
Using Wireless LAN Features Using Wireless LAN Features Using Wireless LAN Features 1) The WLAGS4681 menu window appears. cf) If the WLAGS4681 menu window does not appear, double click in the tool bar. 2) Click Wireless Information, select the corresponding AP, and select Connect. cf) If the AP information does not exist, enter it manually. 2-1) Double click Add in the AP list window. 2-2) When the wireless network properties window appears, enter the corresponding AP in Network Name (SSID). Check the corresponding settings for the AP. 2-3) Depress OK. 3) The window in (2) above appears again, and the AP name appears. 4) Depress OK. 4-1) Depress Connect on the window. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 34 >
Cautions Cautions
: When you dont follow below instructions, Injury or damage can be occur Cautions 1. Use only the approved accessories and components provided by BluebirdSoft Inc. to insure user safety. 2. Do not turn on the PDA while its wet, and dont touch the adapter or power cord with wet hands. This may cause electric shock. 3. Never reconstruct, disassemble, or repair the product arbitrarily. Always contact a service center authorized by BluebirdSoft Inc. Ensure that you adhere to the safety warnings and precautions. If these principles are not adhered to, free repair service will not be offered. 4. Backup PDA phones data so that they wont be lost while the PDA being repaired or upgraded. (Ringtone, SMS/voice message will be initialized) 5. Do not use the PDA in the place with high humidity and temperature. High temperature and humidity (Operation temperature: 4 to 122 F/ -20 ~ 50C; humidity: 5% to 90% relative humidity) may cause PDA malfunction. Warranty will null and avoid in this event. 6. Do not put the PDA phone near any credit card, phone card, account book, ticket to avoid magnetic interference. It will cause PDA phones data lost. 7. Avoid the shock and vibration, unplug the power cord if not use PDA phone and keep it in the safe place. 8. Do not keep it in the dusty place, and do not put the power cord close to the heated devices. Unplug the power cord when cleaning, make sure to rub off the dusts around the power plug pin. 9. Fully charge the battery and keep it in the room temperature if its not going to be used for long time. Even so, batterys useful time can be shorten due to the low voltage. 10. Dont paint on PDA, screen and case could be damaged and it can cause defectiveness. Touch exposured area of PDA resin may cause allergy symptom, please stop using PDA phone and take the advice from a doctor BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 35 >
Appendix Appendix 1. Q&A Q. What should I do if the PDA is dropped into water?
A. Firstly detach the battery from PDA and dry them. If PDA doesnt work properly after being dried, contact A/S center for repairing main board and other components. Q. Cant turn on the PDA. A. Program can be damaged. Reset the PDA, and if it doesnt work properly after that, contact A/S center for repair. Q. PDA cant be charged. A. Make sure that PDA and cradle are properly connected, and check if the lamp is turned on. Clearly clean the charging board and try again. If the PDA still cant be charged after that, then probably the batters life is ended or it has defect. (The warranty period for battery is 6 months.) Q. How to claim for A/S (after service)?
A. Fill in the RMA form and send the units to A/S center after being accepted. Repair cost should be paid according to distributor agreement. Q. How to check if the PDA is repaired and being returned?
A. An email includes the courier track number and devices S/N will be sent right after the delivery. Detailed delivery information can be checked by visiting the courier website. Q. What should I do if the battery drains out very fast?
A. It can be happened while using the peripherals like barcode scanner and printer. If the batterys useful time keeps shortening, then its life is ended. Please purchase the new one for replace. BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 36 >
Appendix Appendix 2. Accessories Preparing the image Preparing the image
[Portable Adapter] [Vehicle Adapter]
[Ear-jack]
[Stylus] [Leather case]
BIP-5000 Copyright 2005 Bluebird Soft, Inc. All Rights Reserved. < 37 >